Move clocks, gdsc, bandwidth resources out of venus_hfi and
use the ops in variant and venus_hfi code.
Change-Id: I1be77c9d384f4eef2cb8085b75c39dc3fd3eeb86
Signed-off-by: Stanimir Varbanov <quic_c_svarba@quicinc.com>
The operation is not used anywhere, delete it.
Change-Id: I4fe7cd41d63ea1b1e0792de6b3e98757860629d8
Signed-off-by: Stanimir Varbanov <quic_c_svarba@quicinc.com>
The init_interrupt op is not used out of variant, lets
remove the op and used the functions directly.
Change-Id: I8f97cf503503b7f30e824843a5bd9d93c702241a
Signed-off-by: Stanimir Varbanov <quic_c_svarba@quicinc.com>
On all places ucregion setup is done just before calling
boot_firmware, move setup in boot_firmware op and remove
ucregion_setup op.
Change-Id: I91a9a72d3b88eef91e82e19b9d8629e9731211f5
Signed-off-by: Stanimir Varbanov <quic_c_svarba@quicinc.com>
For some resolutions memory requirement was coming as 4 * yuv_size
and for CQ/RC_OFF it was 8 * yuv_size. With this fix it will be
max 2 * yuv_size (+ 25% for 10 bit). Fix typo in 720P resolution check.
Change-Id: Ib5908f1eef8dca92dac46c5c195cd47ba28a4df4
Signed-off-by: Mahesh Kumar Sharma <quic_smahesh@quicinc.com>
Make slice delivery a boolean control instead of menu.
Change-Id: Iedf8e0df882d61e82661c7f557473d3f7b49215a
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Remove the temporary 2-pipe condition for DDR line buffer
write calculation for BW.
Change-Id: I75dba3106f0af9f7a6eb43036f86209202e22d5d
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
During power collapse, video driver would power collapse video
hardware followed by video controller.
While power collapsing video hardware, it may happen that video
firmware has already power collapsed the video hardware, since
it is hardware controlled. For certain cases, like XS WD, it
may happen that video hardware may not be power collapsed by
video firmware. In such scenario, skipping power collapse sequence
of video hardware would lead to unhandled transactions from video
hardware.
There is a power status register which can clearly suggest if the
video hardware is power down or not. Added a check to confirm the
power status of video hardware before skipping or executing the
power collapse sequence for video hardware.
Change-Id: Ibd9cd708a259897262fcc6cab27b26aaf37f1b13
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
8k@30 fps encode has a very low margin for sw/fw at 338MHz.
Hence, increase core clock little bit(5%) to move to the next
corner i.e., 366MHz.
Change-Id: Idebde3c726086ec49d1fb0ca4525953dd3a30ba9
Signed-off-by: Akshata Sahukar <quic_asahukar@quicinc.com>
Certain codecs/use cases require larger COMV buffer sizes to achieve
performance. Introduce a property to set COMV bufcount and calculate
COMV buffer size based on the bufcount.
Change-Id: Ib0ed8afe77708dc453cbcc121bcd8606db637152
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
Internal Buffer(CMD_BUF) size calculation is changed from (3 * 4) to 48
in firmware for H264 decoder. Aligning with same calculation in driver.
Change-Id: I974bca7d2e128cee24bf237b6f9ea606f386031d
Define vidc macros corresponding to private v4l2 macros
defined in v4l2_vidc_extensions.h file in msm_vidc_internal.h
and use the same wherever applicable for successful
compilation of upstream driver.
Change-Id: I2c7b3741d29996beb35b08b9c6dbd88876bb6ca6
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Move the usage of v4l2 macros in helper functions to
avoid compilation issues on upstream kernel with private
codec defines.
Use vidc macros defines in code instead of v4l2 defines
wherever applicable.
Change-Id: I43d7deb4f84c502689ceaec3273803444f30f379
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Move mapping of v4l2 to vidc macros for codec, color format,
color primaries etc to target specific file to restirct the
usage of private v4l2 defines to target specific file.
Change-Id: Ie83968cb944c756e55b6514c496c0b23c5d16413
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Update all functions in msm_media_info.h to use vidc color formats
instead of v4l2 color formats macros to restrict the usage of private
color format defines in only helper functions.
Change-Id: Ib308c76af7b16ddac93023202191a47b21d68f5c
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Calculate AV1 VSP cycles using calculations in Kalama perf model.
For legacy codecs, VSP cycles are still calculated using
legacy MB_CYCLES_VSP.
Change-Id: I2535924d650bffd4da32e187fe9e84a27d03ad37
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
Optimize HEVC Bin buffer allocation by allocating 25% additional
bitstream buffer size for 10 bit HEVC usecase and avoiding the
extra memory allocation for 8 bit usecases.
Change-Id: Iebbedf43e80fad852807349cbe7f70cf7a632a73
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
1. Host will use HQ quality mode for all INTRA encoding case
2. Cap bitarate and bit rate boost to max bitrate of current
session config
Change-Id: I8e8d19998ebeff992c290fbd18c072b2b93ffef2
Signed-off-by: Deepa Guthyappa Madivalara <quic_dmadival@quicinc.com>
1. add DolbyVision metadata cap and V4L2 id;
2. Increase decoder persist buffer size;
3. Increase decoder output meta buffer size;
4. Increase encoder input meta buffer size;
5. Parse buffer overflow flag and set buffer flag
accordingly;
Change-Id: I8fa5e89068dd479033d28f627e585edc3a1c58bb
Signed-off-by: Zhongbo Shi <quic_zhongbos@quicinc.com>
Reduce bin buffer size to detect buffer overflows in first
stage, which allows frame to be re-encoded with a different QP.
Change-Id: Ifaa5f744491ba35ceee164afeae7d9de90f81e18
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
For Quality mode decision, Complexity and Operating rate
are handled as below -
[1] If Complexity and operating rate both are set,
then for NRT, complexity is honored, and operating
rate can be adjusted. But for RT, Operating Rate is
honored and complexity can be adjusted.
[2] If only Complexity is set, then complexity is honored.
[3] If only Operating rate set then Operating rate is honored
[4] If None set, then upto encoder to decide
Change-Id: Ib8008551d5ee7a9506f4d1586ed7a3ae967ac54b
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
AV1 bitstreams can be encoded with non-recommended tile settings
which reduce pipe efficiency when 128x128 superblocks are used.
Increase vpp cycles when 128x128 superblocks are detected.
Change-Id: I14b42363fe36116144e2a2a4bbf67cd9cc26632b
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
Complexity parameter defines the encoding tools used
during an encode session. Higher the complexity implies
more quality with advance encoding tools used.
Keeping the default value as moderate or acceptable
range.
Change-Id: I3ee66d3a6612d5d60cd63a0698a4248f48ee8e2d
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Add support to enable slice encode delivery for
HEVC and AVC codec. Basically in this mode, each
encoded slice is given as a separate FBD to the client.
Change-Id: Ia30fde9abaf2b38fb486113807fbb7f19110225c
Signed-off-by: Chandrakant I Viraktamath <quic_civirakt@quicinc.com>
Encoder preprocessing feature requires additional cycles
and bw to support this feature if it is enabled.
Change-Id: I46de42dd0cb0d5a7cd9fdf00beeaefd50e40798e
Signed-off-by: Mahesh Kumar Sharma <quic_smahesh@quicinc.com>
1. Remove load based admission control for decoder.
2. For decoder, use max of frame rate, operating rate,
timestamp rate and input rate for power calculations.
3. For encoder, use max of frame rate and operating rate
for power calculations.
Change-Id: Ibdb2d4b29438d7f656a27771953d10e0a0e72edd
Existing video driver allows complexity configuration to update
quality mode only for non realtime sessions.
Change-Id: Ic4eb5b1c8904fffe2baa1606db37285f53e918b3
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Remove dependency between min quality, CAC and quality boost.
Accept quality boost value from client and if client did not
set then enable max quality boost upto 4k@60fps and disable after that.
Change-Id: I0685065b8dee8754aff2cf5f176a2f40e9e080dd
Signed-off-by: Mahesh Kumar Sharma <quic_smahesh@quicinc.com>
Use client input buffer queuing rate for power
calculations for non-realtime sessions
Change-Id: I498422ba1ae9ae96b782a2096dc0cd0aa7b05798
Signed-off-by: Deepa Guthyappa Madivalara <quic_dmadival@quicinc.com>
Add support for AV1D Intra-Block Copy (IBC) feature. This requires a
dedicated internal buffer (HFI_BUFFER_IBC_AV1D), which was previously
part of LINE buffer. A new internal buffer type called
HFI_BUFFER_PARTIAL_DATA is introduced, and this buffer type holds
HFI_BUFFER_IBC_AV1D for AV1D. HFI_BUFFER_PARTIAL_DATA is mapped to
NON_SECURE_PIXEL context bank for non-secure and to SECURE_PIXEL
context bank for secure use case.
Change-Id: If7ae22495f9981f275d54acc342c25ccdfc0c7b9
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
Originally h26xd and vp9 display buffer was allocated from FW heap.
In order to decrease heap usage for 24 session support on IRIS3,
FW has moved display buffer from FW heap to persist buffer.
Adding this support in driver.
Change-Id: If865748e7c0df5fecd26905f7ef343f465f69967
Signed-off-by: Mahesh Kumar Sharma <quic_smahesh@quicinc.com>
Copy fixes in power down sequence from Iris2 to Iris3.
Change-Id: I0ec94dbe064e10b6c4172b206561d8951c00a26b
Signed-off-by: Chinmay Sawarkar <quic_chinmays@quicinc.com>
