Host add support to save gtk and set hlp data from fils ie of connect
response.
Change-Id: I5e6b9882359697f09a0935a9c07f3427dbe04cc2
CRs-Fixed: 2849123
Add legacy pointer in connection manager context to use for RSO
and other connection manager legacy operations.
Change-Id: If3fdfc7d830fb15f6c2ef56cdd0b7b3dde7f5f36
CRs-Fixed: 2845981
rx_mpdu_missed statistics used by CNE records instances
of BA hole happens, not duplicated frames instances.
Fix this field with correct value to avoid incorrect
VOLTE switching.
Change-Id: I815b9a4caeb6eedf36be66f8650ca98d00542c60
CRs-Fixed: 2848460
During esp ie parse from beacon/probe response, the data pointer
is getting read from esp ie and it's not validate while updating
to esp params which may cause out of bound read issue.
Validate data pointer before updating to esp params.
Change-Id: I1167b82248613cc65fcd7c70cdcfe57595de6b21
CRs-Fixed: 2842234
In security mode, allow only EAPOL frames in receive path
when peer is not authorized. This feature is enabled per VAP
based on vdev flag and will be applicable for all peers in that
VAP
Change-Id: Ic5dea09c2083f31e8cd301a0cdc3565f247b735c
For lithium based chip, the rssi_comb value fetched from monitor
buffer TLV is in unit dBm already, if plus noise_floor value in
qdf_nbuf_update_radiotap() again, then the rssi showed in wireshark
will be incorrect.
Convert rssi_comb to unit dB and not impact legacy chip in
qdf_nbuf_update_radiotap().
Change-Id: I889a15f39ebc639386405fb0aae1909c0cce75e0
CRs-Fixed: 2844896
Add CFO, agc_gain and rx start timestamp related parameters
to wmi_cfr_peer_tx_event_param and populate the same with
data from FW peer tx event.
Change-Id: I462fa56a854b18d1f9b46d1e14eea85da0d45f23
Extract agc gain information, CFO & rx_start_ts from
rx status and cfr peer capture event to CFR host metadata
Change-Id: Id896554f1da6920bd3eeced1298b07857d41a68b
Reduce excessive data path logging to kmsg during roaming and
change the logging level for such prints to debug/info
high.
Change-Id: I1e6506de83e59a31304234905a3dd38f6d8b03f3
CRs-Fixed: 2848624
During nbuf free if entry is not found in debug tracker list
it is treated as double free or unallocated buffer free
which is not correct because there is possibility of nbuf
entry not being present in debug tracker list due to memory
allocation failures for tracker nodes in system low memory state.
Maintaian counter for nbuf debug tracker node memory
allocation failures, during nbuf free if entry is not found
in debug tracker list and tracker memory allocation failures
are present then don't raise issue for nbuf free.
Change-Id: I770cfc23bad35af7e7dbec34852a31cc68300ca5
CRs-Fixed: 2844059
Currently the rx rings history is allocated dynamically
on load time. The memory requirement for saving these
history are more than a page (order 5 to 6 allocations).
Such big memory allocation can fail due to various
reasons, one of them being memory fragmentation.
Fix this by pre-allocating the rx ring history memory.
Also allocate the rx reinject history memory when the
HW accelerated path is used.
Change-Id: Id957cd5df91a2ca7f182dea691a0557b4e386f55
CRs-Fixed: 2844388
During ie parse from beacon/probe response, the variable
tbtt_count and tbtt_length in util_scan_parse_rnr_ie() getting
read from ie and the value is not checked before using it which
may cause out of bound read issue
Validate tbtt_count and tbtt_length before using it
Change-Id: I51cfb2356fb16feda8a70c4b76c7f76c90b1393b
CRs-Fixed: 2836205
Use safe API - wlan_objmgr_iterate_obj_list to enumerate
vdev. It will check vdev in "create" state by
wlan_objmgr_vdev_try_get_ref.
Change-Id: I650801c07846e22f1863925ed4316c0a24bd9cae
CRs-Fixed: 2849177
There is compilation issue since dfs macros only defined with
WLAN_COMP_CHAN_MODE. So adds related definitions for the case without
WLAN_COMP_CHAN_MODE.
Change-Id: I4b9f16b5000304157067be565864cc79c510770f
CRs-Fixed: 2848979
Introduce ini setting to enable or disable strict_channel_mode. When
this mode is enabled, driver will no longer implicitly select a
different channel (or phymode) if the user configures a phymode (or
channel) which the existing channel (or phymode) does not support. Also
with this mode, the user cannot change country at runtime, if the existing
channel/phymode combination is not supported in the new country.
Change-Id: I8e6246530df5d125a91068d513b436fe71f68e5a
CRs-Fixed: 2842892
WLAN HW can still access the IPA tx doorbell address post
disable pipes if there are any pending tx completions which
could result in a NOC error.
Fix is to reset the WBM2SW ring HP addr to shadow addr in
DDR before pipes are disabled.
Change-Id: I52900eb34530388487923a887354ef8839d8c728
CRs-Fixed: 2846421
If is_bwnss_oui return true in util_scan_parse_vendor_ie,
and it will run into below logical:
scan_params->ie_list.bwnss_map = (((uint8_t *)ie) + 8)
But in fact if ie->ie_len < 6, it will casue read out
of boundary issue. So add the length chekcing before
reading it
Change-Id: I0cdf723154eb808f8062efd897f9d67d54d4573b
CRs-Fixed: 2838849
WMI cmd and event use different log buffer, when trace the hang
data, proper wmi buffer should be used according to API's parameter.
Change-Id: Ic87482e92600b2bb579347447388a791dc2ca563
CRs-Fixed: 2847223
When runtime power management is enabled, until the system is fully
resumed, we do not post any message to CE, instead they will be queued
in HTC. Once the device is fully resumed, all HTT messages in the queues
will be downloaded to CE at once. In some corner cases, it is found that
too many FSE caches flush messages getting queued during the runtime
resume; once the device is fully resumed, all these would be downloaded
to the FW/HW at once causing unintended crashes.
Avoid posting FSE cache flush messages until the device is fully resumed
to fix the issue.
Change-Id: I2be21406e8c7a9dcd86df3e93c2568797defcad0
CRs-Fixed: 2843541
Reorder channel mode macros to have macros in logical
order, and to optimize the channel modes to use
bit specific enums instead of single bit to reduce
the usage of number of bits. The changes are specific
to host
Example for Channel mode: IEEE80211_CHAN_HE20
Channel modes represents only the information regarding
to channel such as band, width, passive, DFS, blocked
40MHz_intolerant and so. It doesn't have information
regarding hwmode like 11ac,11ax.
CRs-Fixed: 2846331
Change-Id: I197de032a4d677a27b46028fa090a6eabe0c6086
In nudge response, FW sends wake TSF value. Implement changes
to handle wake TSF values.
Change-Id: I941f1dbab3ba83bba1f0b8e03b83d1b81365c7dd
CRs-Fixed: 2847181
Channel number can be invalid when finding out the enumeration for the
channel. Rate limit the messages for the same.
Change-Id: Ie6cf178482647547d58d4d9555763332d6598846
CRs-Fixed: 2843978
In moselle, once wow enabled there is a possibility that wow wake
interrupt can be fired from FW during runtime suspend in-progress
in host, this will introduce a race between runtime suspend and
resume, so adding a synchronization between runtime suspend and
wow triggered runtime resume.
Change-Id: I38d6a24e4421697cc2d0090ba8d19884885596cb
CRs-Fixed: 2845672
Currently, 6g channels are sorted based on the weightage of each
channel. Frequencies are sorted but the flags associated to each
channel are not updated properly. So, channels carry invalid
flags to firmware and firmware may miss to scan few 6g channels
based on these flags and may scan few 6g channels unnecessarily.
Copy flags also while sorting frequencies to maintain the flags
of each channel as it is.
Also, change the type of phymode to enum scan_phy_mode
from uint32_t.
Change-Id: I0a2330faab1b738f2d7eff3d39ccbfffd51dfde0
CRs-Fixed: 2840029
A temporary variable "temp" is declared to use it while sorting
the channels based on the weightage/rnr info. This is declared
as a pointer to hold the reference of struct rnr_chan_weight but
memcpy is done to this without allocating memory.
Declare this as a variable instead of pointer to use it as an
intermediate variable for sorting.
Change-Id: If619f5fa462d5400f0a77e57317ac3c8debb34a5
CRs-Fixed: 2842819
To get active disconnect request host uses cm_get_active_disconnect_req
API. Update missed field BSSID into connection request from
cm_get_active_disconnect_req API.
Change-Id: I94fa3e14b4584b95b1d918390e5572fa8f112571
CRs-Fixed: 2846679
Add previously freed nbuf and buffer start address info in rx descriptor.
This helps in debugging use after free access of rx buffers.
Change-Id: I1c883bf049ce75dd0413b85946fe2982648d8004
CRs-Fixed: 2827151
Return type of "ucfg_spectral_control" is QDF_STATUS.
Wrong return values are send for this APIs in case of errors.
CRs-Fixed: 2845251
Change-Id: I24f3beb44486753ad0eba706e9f2ac258067d82d
Return type of "target_if_is_spectral_active" and
"target_if_is_spectral_enabled" is bool. Wrong return values
are send for this APIs in case of errors.
CRs-Fixed: 2845250
Change-Id: I2344676a1ada51e041bb5f7acac8aa22847bee5c
If Spectral scan is disabled(agile and normal mode disabled)
skip init/deinit of Spectral module. Also avoid user requests
to configure/start/stop scan. If either agile or normal mode
is disabled block user requests for that mode alone.
CRs-Fixed: 2840335
Change-Id: I81148e5580fe4bf991b97cd086c8e3a9ca78e77d
Add utility APIs to check Spectral scan is disabled for
a given pdev/psoc/mode.
CRs-Fixed: 2840317
Change-Id: I6820cfc056c697434a138ddf9d8d93b5796a4722
Add APIs to init Spectral feature caps in the upper layer of the
Spectral module.
CRs-Fixed: 2840249
Change-Id: Idfb34a9eec3a66c6d193be7bb828eeec30548ae7
Add target if APIs to initialize normal and agile Spectral
feature caps for a pdev.
CRs-Fixed: 2840247
Change-Id: I6c5385c2050007a5ff3f668ab3d6176328294549
Add APIs to check the agile and normal Spectral scan
capability of the target. This information is derived from
the advertisements from halphy via WMI events.
CRs-Fixed: 2840227
Change-Id: I2aae79b3342d8d74a1f4c00e813cae843a71106a
