Clean up MAX_BCN_PROBE_IN_SCAN_QUEUE and add the corresponding
macro values in umac scan ap config file
Change-Id: I34699372b948bc1e2f515048321018e85259e273
CRs-Fixed: 2497518
Clean up CONFIG_MCL and add MAX_BCN_PROBE_IN_SCAN_QUEUE
in the defaul_defconfig file.
Change-Id: I5c79ed31609ae67545d7ddf4a649925d1d071b9a
CRs-Fixed: 2495605
Some QDF timers on host do not use the QDF timer multiplier. Add QDF timer
multiplier so that all timers on host have it.
Change-Id: I57acb28240ea815aaed685b5a193e492332cad69
CRs-Fixed: 2498149
Provide Global function pointers for accessing DFS APIs that
1) allow or prevent the HW pulses. HW pulses are to be prevented
to detect the synthetic pulses.
2) query whether the HW pulses are allowed or not.
Change-Id: Id1e90ba6682afe747774b46da78f7ae6b56c94e6
CRs-Fixed: 2484584
FW sends vdev stats on vdev down, current host
implementation does not process this event as host is
only processing the stats events for which stats are
requested.
On vdev down FW sends the last available vdev stats and
based on that host updates it's RSSI on disconnect.
With CP stats infrastructure host is not processing
this event and is not updating rssi on disconnect.
To address above issue add a logic to process all the
vdev stats event received by host.
Change-Id: I9a5c32d061562cd3e3741cd9fe4a69f3278e7a98
CRs-Fixed: 2497104
1. Add ADMA channel registration APIs
2. Add ADMA support for TX and RX path
3. Remove async_task thread for ADMA, since transfer thread is
present in the SDIO AL layer
4. Move hif functions which are legacy only to mailbox.c
5. get_hif_device and hif_sdio_set_drvdata changes for mailbox and adma
6. Add rx buffer allocation offload work
Change-Id: Ie98b302176381035b1bd590ef35a977aeef4f09c
CRs-Fixed: 2274807
This changes takes care of the below issues.
1. Skip the host allocation of software Tx descriptors
for single band NSS offloaded radio configuration.
2. Reset the reo frag destination to alternate select
for single band offloaded radio configuration.
Change-Id: I3930f266ff9d81d876dda437b29b1ca83d542e12
Diag_log_max_entry should be used to determine wrap around condition
in DIAG_RX_EVENT_RECORD. Using incorrect max value results in invalid
access and memory corruption. Fix DIAG_RX_EVENT_RECORD to use diag_log
max entry instead of mgmt_max entry.
Change-Id: Icae3ce843b1fd76e15139fae1a867448ad032cf8
CRs-Fixed: 2488783
Smart monitor uses HOSTAP type and no subtype currently.
Also vdev_up is not sent for smart monitor vap. Therefore
target will not enable rx_unicast for this vap and in dfs
channel we dont receive pkts. To differentiate between
regular Host ap and smart monitor vap for target to enable
rx_unicast we send new subtype.
Change-Id: I6c82c152d75eefb608cd80279e60ce211e17b709
Crs-fixed: 2491087
Add attributes QCA_WLAN_VENDOR_ATTR_CONFIG_ELNA_BYPASS under
the enum qca_wlan_vendor_attr_config to support set and get
the ELNA bypass.
Change-Id: I6f0816f4fab80ece713b73eacf03c7c82dd7f286
CRs-Fixed: 2477327
The qdf_trace_msg and qdf_vtrace_msg related API's declaration
are in qdf_types.h but the definition is in qdf_trace.c
Move the declaration to i_qdf_trace.h
Change-Id: I098540347446078bc6d43fd2377d197b2575da1a
CRs-Fixed: 2497779
For multi-radio SoCs, wmi handle is maintained per pdev to map to
separate copy engine used for sending WMI commands to taget. Add support
to send wifi position related WMI to send it per pdev.
Change-Id: I300be2bbfd77cb9390fef37b5b02a002284976e0
CRs-Fixed: 2495277
1. Remove vlan tag in tx and enqueue to hardware.
2. Add vlan tag in rx after peer-vlan_id lookup.
Change-Id: I932202540ac03cabdd20ffd4849fe759ea8a7abb
Limit the total number of tx descriptors allocated using tx_device_limit
ini configurable parameter.
Change-Id: I00b4aa089b235e45bc6c445c57ce32b977d872c3
Add tx device limit configurable from INI.
This is used to limit the overall tx descriptors used in the device
Change-Id: I51e9611ca14bdc146de914317b38b98329130c9f
Add dp_tx_desc_limit for 5G high, 2G and 5G low to limit the
number of software tx_desc to be allocated.
Change-Id: If97e858b73aafaed0e21fc8f6e0337e467ce0ecc
Add support to print vdev req/resp string
on target_if timer start conflict and timer
timeout handler
Change-Id: I0116c03089f4ab80623596bb9e8d0268efb0dd87
CRs-Fixed: 2495018
Update rx error stats. It is a summation of below failures:
- desc_alloc_failure [No free desc available]
- csum error [IP/TCP_UDP]
These failure stats are updated at pdev level and no need
to aggregate this.Directly add at pdev level and export.
Change-Id: I0a5fa8f972babf092163f3cb2d0093547ded4877
CRs-Fixed: 2496037
WMI functions called from target_if are present at WIN code. So these
wmi changes are moved to common code, so that MCL and WIN both use.
MCL needs this wmi code for target_if vdev conversion.
Change-Id: I6f3653ea0fad14f3cdbb32a8dc65e5146ce0a5c8
CRs-Fixed: 2492577
Handle only single nbuf in dp_rx_deliver_to_stack_no_peer. Make sure to
terminate nbuf->next = NULL before delivering it.
Change-Id: Icec76da3b5c5cfd2682489db51cd115e8bc9b830
CRs-Fixed: 2497966
During radar detection, with subchannel marking enabled, when the mode
is HT160, the secondary segment center frequency is determined by
adding +40 offset to the 160 band center frequency.
Consider the case where AP comes in channel 116 HT160. In this case,
the secondary segment center frequency is 5530 which is -40 to the
160 band center frequency (5570).
Primary segment center frequency is 5610 (+40 offset).
Due to this wrong offset addition, the channels added as part of
radar detection are in the wrong segment.
Find proper secondary segment center frequency used for radar
detection.
Change-Id: Icb527fad4fd1317acf8c2b9c010a8ac6a765f985
CRs-Fixed: 2475720
Replace mlme void * data members having different types across
different drivers with specific type.
Change-Id: I4343800e836c8ae0996c19b39a420b314e465a75
CRs-Fixed: 2477457
Printing ring stats from requesting txrx stats needs access PCIe link
so make sure it is resumed by doing a sync resume if it is runtime PM
suspended. Also response of h2t_ext_stats_msg from FW is not guaranteed
so tag it properly so that in HTC layer, corresponding "put" API will
be called right after sending the packet.
Change-Id: Idc5797b38557ed5779d920c72200b9d28769ab58
CRs-fixed: 2487521
Add code to replace usage of void pointers from
HAL layer and instead use appropriate opaque pointers
Change-Id: Id950bd9130a99014305738937aed736cf0144aca
CRs-Fixed: 2487250
Add code to remove void pointer usage for hif_handle
and use opaque pointer hif_opaque_softc and also use
cdp_soc for opaque DP soc handle
Change-Id: I2896f7704ffb809214c5b08756c4b8673307fd9e
CRs-Fixed: 2487247
Make change to remove void pointer usage in DP cal client
instead use cdp opaque pointers.
Change-Id: Ie966ebb7b6bb937d4ee1d6dce3b040804e61ac37
Crs-Fixed: 2484412
Add code to remove void pointer usage for dp_soc
and use original dp_soc structure inside htt_soc
Change-Id: Icdc26ecdb33d565c43dbc101584069808b31c1a0
CRs-Fixed: 2484403
Make change to remove usage of void pointers for
ctrl psoc in DP and instead use a opaque pointer
struct cdp_ctrl_objmgr_psoc.
Change-Id: I9fac21db1156378fc10b95cf10517afa4364da00
CRs-Fixed: 2484411
Add code to remove void pointer usage for htt_soc
and introduce opaque pointer to be used intead of void
from dp layer into htt layer
Change-Id: I555b67af656e89f63d81bb5aa8c7472ea517ae85
CRs-Fixed: 2484402
Add code to remove void pointer usage for hal_srng
and use opaque pointer dp_hal_ring_t instead.
Change-Id: I6907f7376d7fe3c9180b8795bd96f49fead2ec64
CRs-Fixed: 2484404
Make change to remove usage of void pointers for
ring descriptors and instead use a opaque pointer
dp_ring_desc_t.
Change-Id: Ia1e9a3da9eaa3cccf297b2135b52a72f2fe21431
CRs-Fixed: 2484409
Add code to remove void pointer usage for hal_soc
and introduce opaque pointer to be used intead of void
from dp layer into hal layer
Change-Id: Ia38571174c6ed79558d0f0c9cd1a0f4afaa66483
CRs-Fixed: 2480857
Remove dereferencing of htt_soc structure from dp layer
and instead use HTT APIs.
Change-Id: I6b796f9b6504c763e6df2cf49b15bf3eecfbdf69
CRs-Fixed: 2483401
Add code to use cdp_vdev instead of void pointer for
API dp_tx_send_exception and dp_tx_send_mesh
Change-Id: I63ca5a62c2a8cd6feb906181702888814650dfce
CRs-Fixed: 2480836
It is very critical to know the source of who requests runtime
PM resume to debug all kinds of runtime PM related issues. Hence
log them accordingly.
Change-Id: I9551830b1cb567fd29e9d9bbec18705f9cc5e9ec
CRs-fixed: 2496481
After enabling WAKE IRQ during runtime PM suspend, it is able to come
anytime because device wants to wake up. In order to avoid missing
to handle the IRQ and missing resume, set WAKE MSI monitor variable
before enabling WAKE IRQ.
Change-Id: I450e2d7a28f68818e12ff000a36275707a9b97b0
CRs-fixed: 2496603
Commit 13835b1aa2 ("qcacmn: Do not access bus in suspend_noirq")
adds enable/disable WAKE IRQ through hif_apps_irqs_enable/disable
APIs to bus suspend/resume routine which are also called by runtime
PM routine. However, runtime PM suspend/resume routine will also
enable/disable WAKE IRQ by itself so WAKE IRQ will be disabled twice
and only enabled once before entering suspend so the WAKE MSI will
be masked which results device requested resume failure. It is also
same for resume path. Hence remove enable/disable WAKE IRQ from
runtime PM routine.
Change-Id: I5774d0450c70f3ff74ea81dc44ef3656eb8c7a96
CRs-fixed: 2495897
Replace cp_stats void * data members having different types
across different drivers with specific type
Change-Id: I5497df358e495aaf187097b093622b34ab637f42
CRs-Fixed: 2477447
