In current code, deauth is skipped for PMF clients
but ML peer state is updated for PMF clients also
This fix skips ML Peer state update for PMF clients
Change-Id: I41c870a5ff4bb658f378b65c729947fad324e807
CRs-Fixed: 3261671
This is a new FAST TX API which avoids various checks.
This API will be called when SFE tags a pkt as fast_forwarded
and vap's fast_tx flag is set.
avoid additional re-checks in the wifi TX function
CRs-Fixed: 3218650
Change-Id: Iba17ede59652a1ff2af553f57de21dc58946298e
Currently net dev stats are handled using QDF MACROS which is not
ideal approach. So implement OS agnostic inline API's for
handling net dev stats.
Change-Id: Ib8ee368d6575ba6628df473fda057c254fc5bab4
CRs-Fixed: 3189332
Currently the INVALID_CHANNEL assumes the value 0xBAD. When a channel list
array is indexed, there is an array out of bound error when the channel
list array is indexed using INVALID_CHANNEL or when the index is greater
than equal to NUM_CHANNELS. So a check for an invalid channel enum is
likely to be, (ch_enum == INVALID_CHANNEL) && (ch_enum >= NUM_CHANNEL).
Redefine INVALID_CHANNEL enum constant with NUM_CHANNELS constant so that,
the validity checks for channel enum is compressed as,
(ch_enum >= INVALID_CHANNEL).
Change-Id: I5be588fe6011ac85031325f56eff208f2aa7a1e5
CRs-Fixed: 3238386
Add a new module ID QDF_MODULE_ID_COAP for
CoAP(Constrained Application Protocol).
Change-Id: I4420f741984dfa81677717a6bbb337a0f0b3051b
CRs-Fixed: 3254124
Error Handling in Event Based Mechanism to reduce
delay by removing sleep while getting response
from firmware.
Change-Id: I9ee8e03b0d0ebdaae150417fb0fb0531e5bf4a86
CRs-Fixed: 3268808
Use WLAN_CONFIG_TX_DELAY to enable HW Tx delay for both
SAWF and non-SAWF stats.
Change-Id: I6db7d386c0e3654f53398dcba1db7c5568544b0c
CRs-Fixed: 3262425
Currently there are few TLVs which are received in
the monitor status ring, but are not parsed for any
data. Since these TLVs are unhandled, it causes
excessive logging per monitor status ring entry.
To avoid such excessive logging, handle the currently
unhandled TLVs which are always received as part of
other TLVs in monitor status ring.
Change-Id: Idbe5a25e926a088adacaf5dfb892aff5885f8576
CRs-Fixed: 3266650
Based on traffic end indication marked packet coming
from network stack, send indication packet to fw via
exception path to terminate ongoing SP.
Change-Id: Ia2be60d485be4b05665cf6b1684af9258417ffb1
CRs-Fixed: 3207392
Access peer, vdev only if peer_id in current pkt is
different from previous pkt.
CRs-Fixed: 3257844
Change-Id: If10356a01030511c7473112f67f3434d328d4586
Enable subtype filtering for all types of frames. Check the subtype
for all types of frames and drop the frames which are not requested.
Also enable PPDU level filtering by dropping the MPDUs after the first
MPDUs.
Change-Id: I94496ec278724a7023a79b50c2cd7a77b2707e74
CRs-Fixed: 3247309
Fix the mpdu logging option in htt command so that msdu/mpdu
logging is correctly written into the register.
Change-Id: I98b8a1a78cc0cfae37e91e9e3e489ac54139ff75
CRs-Fixed: 3265015
In some conditions REO error ring may have RX flood, but
there is no force break scheme for that ring process. This
leads to starvation of RX refill buffer ring and then FW
crashes due to no refill buffer. Change is aimed to force
break of ring processing and refill buffers in small batch
count.
Change-Id: I3c543ebb16bd1709e782be759c9063a356a96562
CRs-Fixed: 3262685
Previously when chains of BT and WLAN 2.4 GHz are separated,
hybrid mode will be used for BTC. Now adding fixed FDD mode
to fulfill different BTC scenarios.
Change-Id: I8f415ae65160977df478c9bd908e9429d69103c3
CRs-Fixed: 3247146
In function dp_rx_defrag_ccmp_decap(), it will remove the 8 bytes
ccmp header for each fragment, but later at the end of dp_rx_defrag(),
8 bytes ccmp header will be removed again, then actual 8 bytes packet
data will be lost, de-frag failed.
Do not remove ccmp header in dp_rx_defrag_ccmp_decap() as it is not
necessary.
Change-Id: Ibf7beca38e9979a3203d4de702716c8e24e435fe
CRs-Fixed: 3263872
Loop is continuing as chain index is getting assigned to zero inside loop.
Adding check for chain index to avoid infinite looping.
Change-Id: Ifff67c00b15d12195e5a3bf554de1529511c400f
CRs-Fixed: 3261913
Based on new requirement, driver needs to send feature set
information to fw as part of wmi init command.
With this change, fill the feature set info in feature set bitmap
and send this to fw with wmi init command.
Change-Id: Ic405c7e8e5ddd1399deacfaab240e979468c53c2
CRs-Fixed: 3262862
Based on the new requirement, add support to get requested
feature set info from different feature components.
Change-Id: I75c5a3062312b1124d21d1ae429a7c5a18d9f2d0
CRs-Fixed: 3262867
Add 6 GHz function under CONFIG_BAND_6GHZ flag to avoid
multiple definitions and function defined but not used
issues.
Change-Id: I873300b3165df2f13b3c99d5e11e388dadde1fab
CRs-Fixed: 3265134
Pool id validation should not be against MAX_PDEV_CNT because pool id
1 is valid in case of monitor status ring process. Hence, added a new
API dp_get_rx_mon_status_desc_from_cookie() which validate the pool id
against NUM_RXDMA_RINGS_PER_PDEV to get rx_desc from rx_desc_status pool.
Change-Id: I20baf8c667c1983eff08a204afe3736708d844d1
CRs-Fixed: 3262544
6 GHz SAP needs to send either a probe response or fils
discovery at configured interval. These in band
discovery frames can be disabled when lower band vdevs
are collocated with 6 GHz vdevs.
FILS disabled when lower band vdevs were up.
After vdev up send if WLAN_VDEV_FEXT_FILS_DISC_6G_SAP
is not set, host sending FILS command to enable 20TU.
Either driver or user not enabled 20TU probe response,
Host did not send the 20TU PRB RESP TMPL before sending
20TU PRB RESP enable command resulted Target assert.
Fixed this issue by adding 20TU vdev feature flag
and add appropriate check before sending command
to enable 20TU probe response.
Change-Id: Icb0ea5ef40b1fe2dd2dc6b97dc079ab7780e8cfc
CRs-Fixed: 3244471
Driver is able to get rates info per MSDU, which can
exclude special frames like ARP, DHCP, etc. This change
is to refill the rates info parsing by rateflags from FW,
including legacy rate, MCS, NSS, BW, preamble, GI, etc.
Change-Id: I043c3ba5c2a06019f3e9bd1765e6b8430174cf6b
CRs-Fixed: 3263832
Driver is able to get rates info per MSDU, which can
exclude special frames like ARP, DHCP, etc. This change
is to refill the rates info parsing by rateflags from FW,
including legacy rate, MCS, NSS, BW, preamble, GI, etc.
Change-Id: I129d5f0dc48758d1a92ac0c3622c1761cdae8286
CRs-Fixed: 3255467
In per vdev cm_id, same ids may get used across vdev's,
leading to confusion.
So add vdev id info in cm_id to avoid same cm_id across
vdev's.
How to read new id
Command_type vdev_id req_id
0c 01 0001 = 0x0c010001
=> connect on vdev 1 req_id 1
0d 00 0002 = 0x0d000002
=> disconnect on vdev 0 req_id 2
Change-Id: If526ea31a3d792a31c44ad607e1878691120dd7c
CRs-Fixed: 3263910
When nbuf allocation failure happens, there is no retry scheme.
So RX buffers in refill ring may shrink and not got enlarged.
This change is aimed to replenish more RX buffers when watermark
is less than critical low threshold.
Change-Id: I201b9e252ba08ba1bff47e0b5ec819a45f1b1ddf
CRs-Fixed: 3245915
Add HW, SW and nbuf prefetch support in Berryllium, this will
ensure we have prefetched the HW desc, SW desc and nbuf by
the time we are in the 3rd iteration of the dp_rx_be_process
first loop.
CRs-Fixed: 3218647
Change-Id: I27d371c5d1c9a37d61e4fc00d5eb03609fad589c
Features that rely on monitor status rings do not work when
num_rxdma_status_rings_per_pdev is assign to 1. This change
will fix this issue by removing this assignment statement.
Change-Id: Ic7b8b84be6fa9c34c15a86cb6ec5174cc512ddd9
CRs-Fixed: 3258392
Currently, Active command id is reset during memory release,
but a new command will become active before memory release
of serialization command, and if it try to check the active
cm_id (using cm_get_active_req_type) it will be valid, which
is incorrect.
Fix is, reset the cm id for active command before calling
release active command.
Change-Id: I6f4844c61349a00af5967f9c757844473244d737
CRs-Fixed: 3263863
