enable the wsa and wsa2 clk as per sequence.
Change-Id: Ieefa4b6ea7aec535d940d780b0ed923483b4d3ee
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
Add support for modules to be built with Bazel for pineapple and kalama.
Create generic module registering system for multiple targets.
Change-Id: Ib92e4e6b8eaf022d9ba4f66f149c14228238ae21
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Remove all references to members of regmap struct,
which caused a dependency to the internal.h header
in regmap. Removing these references allows us to
remove the dependency on that header entirely. The
data in question have been replaced with defined
constants.
Change-Id: I6d302a4f2614dd094dd24a850360b4e12868ed88
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Remove drivers/clk/qcom/common.h, which is an
internal header that is unused in audio-ext-clk-up.c.
Change-Id: I62dbdfd87c717ec60461a32505cba1b603c5e512
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
When target enters into secure mode, HLOS receives an event to
place vote against sleep until writing of required registers
from TZ. Once the secure DMA registers write done, HLOS will
get a event to unvote against sleep.
Issue scenario: When device enter secure mode votes for sleep
against, before unvote event receives for TZ SSR is triggered.
When SSR triggers all votes are reset on ADSP. While recovering
from SSR, HLOS receives unvote event to HLOS, which will unvoting
of other use case vote and leading to NOC issue.
Solution: Maintain a counter for sleep against vote to
track the votes and unvotes. Also reset the sleep counter
if SSR is trigger as ADSP will reset all votes on SSR.
Change-Id: Ib1689d8f54408a9a80a12fb2697ba5c3d7087b9a
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Harmonium supports full and half rate modes for DAC.
Update DAC rate to swr clkdiv2 to achieve better
power performance.
Change-Id: I136a064dc258ee839ea78c9f1051ba34521ac871
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
Get the wcd939x power mode of from mixer ctls and configure
same power mode to wcd-usbss.
Change-Id: I9dc8fe586f7e7608da542b0986bb7c605fc552d4
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Unmute WSA after enabling main path for
ADIE loopback cases.
Change-Id: I850aa4dbcf77371811010c1d614c6c7e94736971
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Default Bluetooth audio DAIs are slimbus based. Add support for
BTFM Proxy dai driver to use it on Connectivity Proxy
HW Endpoints.
Change-Id: Ia47fd004cc268524d152292c56defcd0c73d3ba7
Signed-off-by: Rohit kumar <quic_rohkumar@quicinc.com>
When SSR triggered, graph_set_config failed should return ENETRESET instead of
ECONNRESET. so when gpr_send_pkt returns ECONNRESET, reset the value to ENETRESET.
Change-Id: I2ce72a8fef3163050f777c41fffd0266642e75dc
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
For wcd939x LDORT_SCD_INT IQR register is removed, so remove
LDORT_SCD_INT register to avoid CMD ignore errors from RX SWR
while booting.
Change-Id: I6dfe6a1c32fddbcdbbf388b47efde60b6b4b5f35
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Fix wsa884x deinitialization to avoid double
free and use correct kfree function to prevent
crash.
Change-Id: If7e0e3ceb76f9a29fbafee274147f2992e02085f
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Change snd_soc_component_update_bits to
regmap_update_bits because wsa884x may not be
initalized post IRQ.
Change-Id: I3018c680e8b2db346e5acaefc330a5af98150cf2
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
add lock in ion free to protect dma buff and avoid
use after free.
Change-Id: I6376408ce1a5b98b7aeacc32e44ec4db08ff9df5
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Remove soc/internal.h, which
is a duplicate of the internal regmap/internal.h.
Change-Id: I05b30b101382e68ced26343ef1278cecfd1b0ed3
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Disable legacy HPH surge protection
for certain platforms. Enable HPH over-current
protection for all platforms.
Change-Id: I147321417ad2152530a71b3990a7cbf064c9299f
Signed-off-by: Sam Rainey <quic_rainey@quicinc.com>
Add support for HPH 2Vpk output mode in the
WCD939X driver.
Change-Id: I44a84cde84f0feee6d7d1255e097a5ffb616f78e
Signed-off-by: Sam Rainey <quic_rainey@quicinc.com>
inform scheduler that certain CPUs need to be reserved for audio.
Change-Id: I3d2b4d6faeca1dfab3d7461db4e13a1d188f864c
Signed-off-by: MingShu Pang <quic_mpang@quicinc.com>
Use rproc_set_firmware API to load ADSP firmware using
image name when adsp_fw_name is set based on
fuse variant.
Signed-off-by: Aditya Bavanari <quic_abavanar@quicinc.com>
Change-Id: I529fe3f9f5f3a861c6b345a79f3ef90f517405a4
Currently, 0 is written into SWR_PLAY register when disabling SWR play,
it coincidently updates the PLAY_SRC to FIFO mode and disables it. If
there is a FIFO play triggered from SPMI address space, the FIFO play
will be disabled and the FIFO samples will be flushed. To avoid this,
keep in SWR PLAY_SRC when disabling SWR play.
Change-Id: Ib594df57835979a8832f2f7a1954ff36f643f724
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
update HPH power mode comparison with mixer ctls enum names,
so this will pick the correct compander coeff values depends on modes.
Change-Id: I42cdfeceda4c4bac960b71bbd62d0e8528680490
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
lpass_cdc_register_macro can be called simultaneously by different
macros as bootup resulting in inconsistent value of
num_macros_registered. This will result in one of macro going ahead and
registering lpass-cdc component and other macro failing to register which
will cause probe of other macro to fail. Protect function with mutex lock
so that macros access it sequentially
Change-Id: I9d3811eeceb06b6a7e66d79a1b899b2c4283bb52
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
