For HE case, SGI enum values are different in FW and Host
So that firmware stats and host stats shows different values
To resolve this, change SGI enum value in host to match
firmware definitions.
Change-Id: I1b38dbe32a6c1ab2610c1c3a736a6898ddc73e30
Some of the macro names defined in qca8074v1, are defined with
a slightly different name in qca8074v2, and few macros have the
same name in both headers but are defined with different values.
Fixed the same.
Change-Id: I5e948baf5326d1d8fdfa2bd7ee8aa072c710d17c
NDP is a preamble only PPDU, which do not have payload information
from RXDMA destination ring. The detailed TLV sequence is:
* RSSI legcy
* LSIG_A
* HE_SIGA_SU
* RSSI_HT
* GENERATED_CBF_DETAILS
* PKT_END
CRs-Fixed: 2296348
Change-Id: I19f253c65969b59947bd9a21cf3912b16eb21324
When a ppdu id on a ppdu in status ring find a matching ppdu id
in destination ring. The old logic can cause ppdu id is destination
ring stuck on high value before wrap around. The new logic check
ppdu id between status ring and destination ring is no more than
20000.
Change-Id: Ia601403b0a4fc6cdfff980c7745e055c814137b7
Add the following fields in Radiotap header:
Antenna noise (in dBM)
Vendor Namespace containing the following information
->L_SIG_A
->Device_ID
->L_SIG_B
->PPDU_START_TIMESTAMP
CRs-Fixed: 2285143
Change-Id: I977be73778ab27383f12214c73b56c9b80d9f02d
Clean up datapath component prints by correcting trace levels for
regularly occurring prints and removing newlines from converged
print APIs since qdf_trace_msh appends them by default.
Change-Id: Ie8fe319fcb737720f7400a165e134b6a18bd15b5
CRs-Fixed: 2243843
There are some particular PPDUs which have preamble only:
* NDP frames
* TB_PPDU frames
Add support to the above frames.
Change-Id: I7022433d3765575eaf28d7baf3a11e8b6ce13890
CRs-Fixed: 2275161
Populate the RSSI value for the non associated clients
added in pdev->neighbour_peers_list from monitor status
ring
Change-Id: I509d06bec6eafe8377681c8a3da9a64f301c3c73
CRs-fixed: 2286571
Create separate individual hal_srng_table and hal register
offset in target specific source files. Create separate
functions for qca6290 and qca8074 for few hal rx tx
functions as the macro value differs between the chipsets.
Assign target specific hal tx, rx ops as part of hal_attach
and call respective hal tx, rx ops through callbacks.
Change-Id: Ibbf490c678c39fdd9d54191aad7aaec786db30ec
As per the updated spec, 11AX PPDU's HE SIG_A data-5 field has added
LTF symbol field which is 3bits in size.
Add logic to parse the TLV coming from hardware and update the
LTF symbol value.
Change-Id: I05e2ff8ece7e14dc22ce747e9a9b906bf130462f
CRs-Fixed: 2235233
Add prints to track:
* Incoming TLVs in the monitor mode status ring.
* HE, HE-MU and HE-MU-Other values being passed to the
stack.
Change-Id: Ib23336353dc4a2253a62444b767d2a706ce372ea
CRs-Fixed: 2242514
Process WIFIPHYRX_OTHER_RECEIVE_INFO_E and
WIFIPHYRX_OTHER_RECEIVE_INFO_RU_DETAILS_E TLVs in monitor mode.
Change-Id: I9cea6cee0499fd9ae9e07d4479c7010e35f3e5a5
CRs-Fixed: 2242514
nbufs received on wbm_release ring were chained based on
first_msdu and last_msdu bits if the peer is invalid for these
frames, but these fields in the rx tlv header were in-correct as
hardware does not decap these msdu's.
Based on inputs from firmware we now changed this logic to
using phy_ppdu_id field from the rx_mpdu_start tlv & rx_attention tlv.
Change-Id: Ifc7faa2d1b0585bcc226e5cb2045fcb29d152273
HE field in radiotap header are not being updated for MU frames.
Add support for MU-MIMO and MU-OFDMA frames.
Change-Id: If33e9f9039c8df6e1bb8f591879d4defed184ac8
CRs-Fixed: 2191215
Fix the issue where the MCS rates for HT were repopulated
causing the MCS rates to be decoded incorrectly.
Change-Id: I73efac79d853b6f8af966aec57e70ad645418528
CRs-fixed: 2206784
In existing code, the RX payload buffer for M-copy mode contained
RX MSDU payload followed by additional TLV data.
Add change to strip the skb and only provide MSDU payload
Change-Id: I9834fabfb0e26404a620d8419e7c570fff68f182
1. Moving HT,VHT and HE flags setting into
WIFIRX_PPDU_END_USER_STATS_E case.
As this TLV already have preamble type populated.
2. NSS value wrongly populated in WIFIRX_PPDU_END_USER_STATS_E
case. It has been removed now.
Change-Id: I1c530385c585c0ea0dd14a07a6759a85b80e6a10
1. find_first_bit API returns Size value if it doesn’t find any bit set.
This was causing VOICE AC counter to go high even for TID 0
2. Reset stats was not resetting the stats immediately
3. Added checks to avoid spurious stats increment
4. Detect data/mgmt pkt to avoid spurious stats increment
Change-Id: Ic9c5695fc7bdf58d1237e7e20bb79378a02a21f6
cck rates were getting updated for ofdm rates
and nss index were getting wrongly incremented
fixed the same
Corrected sgi and preamble too
Change-Id: I2dabb685de6e0bd4ba5094845cde228b3c32e2a9
* Update the pkt_type counters correctly within the array bound
* Add support for NSS counters on Tx side
* Update ampdu flag in PPDU struct
* Add support for ampdu flag in hal_ppdu struct
Change-Id: I79ea52727124ea4be4d82912cb2513ea58e2af10
Update mon_rx_status fields for HE case. Also
added rs_fcs_err field to structure and populate
its value.
Change-Id: I4681543c7d6c6c7ac0d666cd93072caaee285585
In radiotap section of sniffer, fix group id field for vht
and rate field for legacy.
Change-Id: I3c1e2e650548551230d9eca5bc043b690169e844
CRs-fixed: 2143521
In mon_rx_status structure mcs,bw and nss values
not populated properly. To resolve this issue, update
mon_rx_status structure fields when embedding values to
respective flags
Change-Id: I33c19c209fcdb7252af4a7ed6cbdbf3682fd4236
Stats counters for BW were not updated correctly
due to difference in mapping of BW on host and FW
Also fix the Rx Stats to account for TCP Ack count
Change-Id: I7e844a7032e7968c110c7a0f8c45b0349a5cb818
Keeping up with changes in radiotap header definitions
and spec. This change reads preamble info for HE SU from
phy tlv and populates the radiotap structure
Change-Id: I0663d1923f2a8277c62ab6c8378aaca026ce18db
Crs-fixed: 2144302
Add missing break identifier in switch case of
hal_rx_status_get_tlv_info() used to parse hal rx status
TLV.
Change-Id: Ie913b6795d0a73fe8d28fefedd7ab799edda2619
Change some HAL API to correspond to the header changes that got
modified for the Napier 11AX HW.
Change-Id: I514b18bc2a92ad11d95c1079ba8ef4b96b7bc6eb
CRs-Fixed: 2124274
Provision to send first MSDU of a PPDU to upper layer based
on PPDU ID received in RX monitor lite ring.
FR 42926
Change-Id: I6daed9382b57fb3355ec6453e0609085cc7b9bb0
CRs-Fixed: 2127108
Move peer stats updation to PPDU indications from per-MSDU indications
to optimize CPU cycles. Add dp_rx_stats_update for receiver side PPDU stats
Change-Id: I4bdda8ac447e64cd1017e5be3949ec3f915a9d71
CRs-Fixed: 2123969
