Currently, when appending the 6G reg rules to the reg rules list, the
index is decided by the current AP power type. However, the reg rules
sent to user space should not be influenced by what mode the SAP is
operating in. Update the logic to always use LPI reg rules.
Change-Id: Iac4cddb2dc1d73ce35bdbe6365ea14af26656bbf
CRs-fixed: 2969456
Smart monitor mode requires buffers on monitor status ring only.
It does not require any buffers on monitor buffer ring.
As an optimization, initialization of descriptor pool and allocation
of buffers for monitor buffer ring is not required. Also filter
settings for monitor buffer ring are not required in smart monitor
mode.
Change-Id: If328b08184865e5472425b5520dd0a364a478c40
CRs-Fixed: 2965717
To fix the below compilation error, included "hal_be_rx_tlv.h" header file
in hal_be_generic_api.c file.
"cmn_dev/hal/wifi3.0/be/hal_be_generic_api.c:754:40: error:
'hal_rx_tlv_get_pn_num_be' undeclared (first use in this function);
did you mean 'hal_rx_tlv_get_pn_num'?"
Change-Id: I57074967dad8cee98fc8094c4eadc9289b7e7984
CRs-Fixed: 2974607
Add change to increase target_if start and stop
response timeout to provide enough time to process
event in slow processing platform
CRs-Fixed: 2965898
Change-Id: I839783331bd9fa4375aee81212005b0f2ac97255
Rectify compilation issue in MLO manager client code by explicitly
providing a tentative bool return for mlo_is_mld_sta() which is
currently only in skeletal form.
CRs-Fixed: 2972899
Change-Id: Ia5a8b2108bc5237f9f130c6bdeca55e1c0a65f0d
As part of regulatory cleanup, Cleanup code under
CONFIG_CHAN_NUM_API feature flag.
Change-Id: I3add81605ea939b3631396154ed3f07f59493f24
CRs-Fixed: 2953646
New TLVs for MLO flags are introduced in peer assoc WMI
command. Add WMI changes to add these TLV in the peer assoc
command.
Change-Id: I366a96c973c3bedda03e4c370099ff809e0bd83d
CRs-Fixed: 2958851
New TLVs for MLO flags are introduced in peer create WMI
command. Add WMI changes to add these TLV in the peer create
command.
Change-Id: I38a129b30b366b6e3939231699f210d1bac362a1
CRs-Fixed: 2958849
Add parameter 'bool sync' for wlan_cfg80211_crypto_add_key()
to indicate whether or not to add key synchronously.
If it's set to true, wait until install key complete event
is received.
Change-Id: I9a69d486665fb3f65a5720ccfbfb638c09329418
CRs-Fixed: 2865832
As part of minidump enhancement feature, incorporate
credit_history data structure into the minidump.
Change-Id: I66a899f6d4054677f25453e87ebf672a575e1b9a
CRs-Fixed: 2946301
As part of minidump enhancement feature, incorporate
wmi_command_tx_cmp_log_buffer data structure into the minidump.
Change-Id: I323971cc397b3ec710152c774462c85900acc603
CRs-Fixed: 2950790
Current FW implementation is not expecting MLO and partner link params
in vdev restart request. But host is sending these params as part of
vdev restart request. This is resulting in TLV count mismatch for vdev
restart request.
To resolve this, Don't send MLO and partner link params in vdev
restart request command.
Change-Id: Ied4572722c701ad7f53ac12727228a383e570433
CRs-Fixed: 2973256
Find out if a VAP is going through restart transition and skip CAC.
All other cases, do not skip CAC based on subset logic.
Also, if the channel is non-DFS, do not do CAC.
CRs-Fixed: 2945741
Change-Id: I5a9de47a879eb8d294dfed126a77970c52b2b546
Refactor connection manager command timeouts to handled unexpected
timeouts in VDEV/PEER SM.
Also flush the req list before deinit to avoid memleaks due to these
timout, if SM is not handled properly.
Change-Id: I6cd1857464691838c75b1ceda32f94ad4cda46a2
CRs-Fixed: 2971466
In SAP case, external authentication(offloaded SAE authentication
to userspace) status event carries only PMKID to allow/disallow
peers to do PMKID+open auth based connection once the peers are
already SAE authenticated.
A check is added on the PMK length with the below change,
change: Ic41c2044e70f8d375130ef9e0af9fe4b83027c26. It rejects the
PMKID update to the pmk cache if the PMK length is 0. It's not
allowing to cache PMKID derived as part of SAE authentication.
There is no need to cache the PMK in SAE case as it won't be
used internally by driver or won't even be sent to firmware.
So, don't add any check and allow PMKID only entries also to
facilitate PMK caching mechanism in SAE SAP.
Change-Id: Ibd72975e91d93af9665c392b4e7a708a5f9c336a
CRs-Fixed: 2967752
Introduce definitions for QCA vendor specific subcommands and
attributes to report DFS radar history.
Change-Id: I2140f636a42978b564fa0800484d3dc89865c2a0
CRs-Fixed: 2958699
Add component id for Repeater feature.
Move the feature specific flgas to Repeater component.
Change-Id: I1615ce0023a0b0f7a3fffa206d6fa5f320a18ed3
CRs-Fixed: 2936326
When Vlan_id is set to 256, AP cannot ping to STA.
This is due to the dataype assigned to vlan_id in
cdp_peer_set_vlan_id API which is using uint_8
instead of uint_16.
Fix to change the data type to uint_16
Change-Id: I6cea467398a032f4afacb76289d4f853bf63c2f8
Some latency stats need to do book keeping before interrupts are
enabled to avoid the counters being overwirtten by ISRs.
Also include latency stats in the case when rx is still pending.
Change-Id: Icff6f7876cd5db103693c6d38a396f1571b1d0aa
CRs-Fixed: 2965601
New TLVs for MLO flags and partner link info are introduced in vdev
start WMI command. Add WMI changes to add these TLV in the vdev start
command.
Change-Id: Ic7d54c406f69346a6eedb43b1ebcf7266c448bd8
CRs-Fixed: 2958843
WMI vdev create is changed to incude mlo macdress as one of TLV.
Add changes in WMI vdev create send API to include this new TLV.
Change-Id: Ia13bdb8fbfc9f68d1e4c0209201f9acc4f575387
CRs-Fixed: 2958839
Update the max bandwidth value of a channel in the regulatory
channel current channel list only during the country change and not
during every current channel list update. This is to avoid updating
the max bandwidth value of a channel that has been disabled by NOL
temporarily.
Change-Id: I36fb19f727c62bc86d61d81494ca1791a33cf99e
Define the following functions for MLO operation:
Peer create and delete
STA/SAP up and down
VDEV create and delete
Is MLD AP or STA
Change-Id: I5c9b3276b8dbb4b2a3f055480cab4a865b8af946
CRs-fixed: 2935769
PN number get function handler is not initialized,
This lead to CFI assert. Add correct handlers for
differnt chipsets.
Change-Id: Ib8836af0d69380da597822d1755bb5dd2309c95f
CRs-Fixed: 2968223
Four new CEs are introduced in QCN9224. Update MSI mapping
for 16 CEs in QCN9224.
Change-Id: I781e2b42453a4ec4f31f4076be1f5813d3637eff
CRs-Fixed: 2969994
Add mcs rate, gI type and other SU sig info to cfr metadata.
For Tx based capture mcs rate & gI type is applicable
MCS For legacy mode
0: 48 Mbps
1: 24 Mbps
2: 12 Mbps
3: 6 Mbps
4: 54 Mbps
5: 36 Mbps
6: 18 Mbps
7: 9 Mbps
8: invalid entry
MCS for HT, 0-7: MCS0-MCS7,
MCS for VHT, 0-9: MCS0-MCS9,
MCS for HE, 0-11 MCS0-MCS11, 12-13: 4096QAM
GI:
0: 0.8 us
1: 0.4 us
2: 1.6 us
3: 3.2 us
ltf_size:
0: he_ltf_1_x
1: he_ltf_2_x
2: he_ltf_4_x
dcm: Indicates if DCM set
0: No DCM
1: DCM
sgi: Indicates if short gI used
0: No short gI
1: short gI
beamformed: Is packet beamformed
0: non-beamformed
1: beamformed
stbc: Indicates if stbc applied
0: No STBC
1: STBC
Coding:
0: BCC
1: LDPC
Change-Id: If6ab4b4878ab24406aba0e890ec08a2dae2b4634
If number of entries available in tx comp ring are more
than quota then process number of entries as per quota
Change-Id: I6345cb6f7cee62c343d152f42beb15460ce02ef1
