Define an attribute for high RSSI roam trigger threshold. STA is
expected to trigger roam if the current connected AP's RSSI gets above
this high RSSI threshold. STA's roam attempt on high RSSI threshold aims
to find candidates from other better Wi-Fi bands.
Change-Id: Ie0323ff990e2679fd9768d2242730f7369cdb64f
CRs-Fixed: 3586127
Add vendor attribute IDs QCA_WLAN_VENDOR_ATTR_ROAM_STATS_ORIGINAL_BSSID,
QCA_WLAN_VENDOR_ATTR_ROAM_STATS_CANDIDATE_BSSID, and
QCA_WLAN_VENDOR_ATTR_ROAM_STATS_ROAMED_BSSID for updating roaming AP
BSSID to user space to enable user space collecting the BSSID for
roaming issues.
Change-Id: I7e41762309740e4b705c58d9340ad20fb179172b
CRs-Fixed: 3582516
Extend enum qca_wlan_vendor_attr_mlo_peer_prim_netdev_event to add MLD
MAC address, the number of links, and link info. Link info contains
ifindex and MAC address of each link of a non-AP MLD that was negotiated
in ML association.
CRs-Fixed: 3591427
Change-Id: I82adfc6a0c0cd31a2a322c09b25f93cfe9753343
QCA vendor extension is used for NDP setup. This defines the new
attributes QCA_WLAN_VENDOR_ATTR_NDP_CSIA_CAPABILITIES and
QCA_WLAN_VENDOR_ATTR_NDP_GTK_REQUIRED to support GTKSA, IGTKSA,
and BIGTKSA for NDP setup.
Change-Id: Iddd9d0f88d1d5d66fd72dc158801ad16c14f39e2
CRs-Fixed: 3583158
Extend QCA_WLAN_VENDOR_ATTR_CONFIG_OPTIMIZED_POWER_MANAGEMENT
attribute to support enum qca_wlan_vendor_opm_mode.
Add QCA vendor attribute QCA_WLAN_VENDOR_ATTR_CONFIG_OPM_ITO and
QCA_WLAN_VENDOR_ATTR_CONFIG_OPM_SPEC_WAKE to configure inactivity
timeout and speculative wake interval in User defined optimized
power save mode.
Change-Id: I726ca91638e07fd1efae4921519bb6affc8b9c21
CRs-Fixed: 3567041
Currently, We are using GET_STATION_INFO_REMOTE_CH_WIDTH
attribute for remote channel width which is using u8 for
storing the channel width info. However, for 320 MHz there
is a need to use u16 attribute to store the channel width
info.
This change is to preserve old interface and use new
interface to store u16 attribute for remote channel width.
Change-Id: I01eb246c380a6155d0d96032549eee53a877cb2a
CRs-Fixed: 3567663
Extend bitwise mask in enum qca_wlan_tdls_caps_features_supported to get
the TDLS wider bandwidth capability from the driver.
Change-Id: I7e7209f72c7d8db3ac06ecafdfe91deb7438e1b2
CRs-Fixed: 3552602
Define a new QCA vendor attribute to enable/disable trigger
based UL MU transmission.
Change-Id: Ide36ec4869dc462879a57ff9a1e06f9f48e5c8d0
CRs-Fixed: 3538865
Add support for per-MLO link configurations in
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION commands.
Additionally, add documentation for
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION commands.
Change-Id: Id83912079b3a4876891ac48beb069b17d4b8ebbf
CRs-Fixed: 3540412
Add support to control maximum allowed bandwidth update type for
the current connection.
Change-Id: I27880a5a969adf46861a58907d1e9e8ec35f9053
CRs-Fixed: 3540098
Currently there is no feature capability support for ll_lt_sap
and host driver and user space assumes that support for ll_lt_sap
is always present which not always true.
This may result in unexpected behavior if firmware does not
support ll_lt_sap.
To address this issue, add a feature capability to indicate
to userspace if host driver and firmware supports ll_lt_sap.
Change-Id: I4a2cc4fdb3d48469a5b1a4be32a4e760543b16cb
CRs-Fixed: 3520969
Define a QCA vendor command to configure MLO link id to the driver on
which the TDLS discovery response frame needs to be transmitted when the
local station is connected in MLO mode. This command is configured to
the driver the prior to every TDLS discover frame transmission when the
station is connected in MLO mode. If the station is connected in non-MLO
mode this command is not configured to the driver for TDLS discovery
frame transmission.
Change-Id: I5815a604d44549cd650744e3fd8c8ca79a076dbc
CRs-Fixed: 3523774
Add a new vendor command and attributes to notify TID-to-link
mapping changes to the userspace.
Change-Id: I9210103807f89f31ddf99965098a78bb4a798665
CRs-Fixed: 3516368
Add a new vendor command and attributes to indicate STA MLD setup links
removal.
Change-Id: If5dca34fa533fa76a8a1e8af456e3c893affbba0
CRs-Fixed: 3510765
Add vendor attributes for EHT testbed STA configuration.
This includes enabling STR MLMR mode and forcing power save
on active MLO links for a defined number of beacon periods.
Change-Id: Ie1808319c9e05901a996d122cc5afeb45bc07ce5
CRs-Fixed: 3497681
Add vendor attributes related to MLO and EMLSR mode
capability configuration for EHT testbed STA. It includes
EHT OM control support and EMLSR padding delay configuration.
Also, generalise the naming of HE OMI control enumeration to
OMI control as it now consists of both HE and EHT OMI control
fields.
Change-Id: I31f4935d59356f67a8ca0f065001325bafb3474a
CRs-Fixed: 3497673
Add vendor attributes related to MLO and EMLSR mode capability
configuration for EHT DUT. This includes forcing active MLO links
and invoking EMLSR mode entry or exit.
Change-Id: Icaf4dda1a614be5fe56966b0f2f2862ac6d62fb4
CRs-Fixed: 3497684
IEEE 802.11be enables multiple links between STA and AP. Each of the
link has its own set of statistics. Add additional attributes required
to fetch link layer statistics per MLO link.
For MLO connection, per MLO link statistics will be sent with the new
attribute QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK. Also, cumulative
statistics of all the MLO links will be sent outside
QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK to be compatible with legacy user
space.
For non-MLO connection, the statistics will be sent without being nested
inside QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK attribute.
Change-Id: I2abe31ad754e59c101ff79dd3ae956bc93880a33
CRs-Fixed: 3488156
Define bitmap values used by LL_STATS vendor command
and update the corresponding kernel documentation.
Change-Id: I70c86926a19907a2a1053bccbd7b316b198e1fb8
CRs-Fixed: 3488125
Currently the vendor attributes qca_wlan_vendor_attr_ll_stats_set,
qca_wlan_vendor_attr_ll_stats_clr, qca_wlan_vendor_attr_ll_stats_get and
qca_wlan_vendor_attr_ll_stats_results for LL_STATS vendor command
are not in sync with the upstream code.
So, fix the differences and match downstream code for LL_STATS vendor
command with upstream code.
Change-Id: I373470e1217f7da82bb25b40e07ed96d1b1a1d6c
CRs-Fixed: 3489509
When user space triggers a scan, the firmware aborts background scan,
and uses the roam status QCA_ROAM_FAIL_REASON_CURR_AP_STILL_OK instead
of "Invalid roam failures reason".
Change-Id: I8a6ed222342398d21d87e7d31956426f3c99cba0
CRs-Fixed: 3481633
Define a new attribute QCA_WLAN_VENDOR_ATTR_CONFIG_AP_ALLOWED_FREQ_LIST
to configure the full list of allowed frequencies for the AP operation.
The configuration is valid only from the next BSS start until the BSS is
stopped. The drivers shall filter out channels on top of this list of
channels based on regulatory or other constraints. This can be used to
specify user's choice of frequencies, allowed list of channels with
static puncturing feature, etc.
Change-Id: Ib74acf2df17d8eb0fb65febc3b3cf54c39de6fc4
CRs-Fixed: 3453682
Add a vendor feature flag for the driver to indicate support
for allowed frequency configuration in AP mode.
Change-Id: I5c4483b229fa68c89a80272ec1ae3f5a95452f6d
CRs-Fixed: 3454926
When user space triggers a scan, the firmware aborts background scan,
and uses the roam status QCA_ROAM_FAIL_REASON_CURR_AP_STILL_OK instead
of "Invalid roam failures reason".
Change-Id: If25d725f610125039a3218ec741cff233c3cb8ef
CRs-Fixed: 3473404
Add a new vendor command to trigger computation of connected channel
statistics such as channel utilization in STA mode.
Change-Id: I868a85bbbee9f9b050636789c3d7217b71164852
CRs-Fixed: 3460890
Add a new vendor command QCA_NL80211_VENDOR_SUBCMD_GET_MONITOR_MODE to
get the local packet capture status in the monitor mode. Add required
attributes to respond with status of the monitor mode. The monitor mode
can be started/configured by using the
QCA_NL80211_VENDOR_SUBCMD_SET_MONITOR_MODE subcommand.
Change-Id: I72edd46f85b545d7aecb3c704441e810db9ca711
CRs-Fixed: 3415711
Add a new vendor command and attributes to control and fetch the state
information of the MLO links affiliated with a specific interface.
This will enable user space to dynamically control the MLO links states
based on the latency, throughput and power save requirements.
Change-Id: I1ef710a6f3a1f8723bb3d1c564c0c803bfa0b587
CRs-Fixed: 3416250
Add QCA_WLAN_VENDOR_MCC_QUOTA_TYPE_LOW_LATENCY attribute
to enable/disable Multi-Channel concurrency low latency mode.
The firmware will do optimization of channel time quota for
low latency in Multi-Channel concurrency state if enabled.
Change-Id: Ibcf1ac82b2650899043ea9b61be5e1501e2d85a1
CRs-Fixed: 3409648
Add new QCA vendor attributes to configure the driver for EHT
capabilities and multi-link configuration.
Change-Id: I322a6fe112b83b3636c9383db152bfaa5dd34c14
CRs-Fixed: 3395113
Add new QCA vendor attributes to configure the driver for EHT
capabilities. These attributes are used for testing purposes.
Change-Id: Ic4ea6f5be212da423181d108c8dcae559a08a47e
CRs-Fixed: 3271502
During implementation of commit 257b119c2d87 ("QCA vendor attribute of
update roaming cached statistics info") some deficiencies were noted as
listed below, so fix them. Since these are pre-implementation changes,
no ABI breakage is introduced.
1) Change all RSSI values to be signed values.
2) Add enums for scan type and dwell type instead of documenting
their values with comments
3) Add missing QCA_ROAM_REASON_STA_KICKOUT to enum qca_roam_reason
Change-Id: I270dc1a009e36e37c83cb6298a096ed91b511df1
CRs-Fixed: 3402978
Add new AP concurrency policy QCA_WLAN_CONCURRENT_AP_POLICY_XR to
configure interface for eXtended Reality (XR) requirements.
Change-Id: I514979a9d950de9e0181dbf6d285812ef8a05126
CRs-Fixed: 3401504
Add vendor subcmd QCA_NL80211_VENDOR_SUBCMD_ROAM_STATS and attribute id
in enum qca_wlan_vendor_attr_roam_cached_stats for collecting roaming
statistics information when diagnosing roaming behavior.
Change-Id: I38fa39c2524e453335cf8281afe403a7c64c8bb4
CRs-Fixed: 3381257
Add more hang reason codes for the hang reason in the
qca_wlan_vendor_hang_reason enum.
Change-Id: Ia7f21c45d58c980219690cda390127f5d4004391
CRs-Fixed: 3380849
Add new attributes for the destination MAC address and netdev index in
SCS rule config subcommand.
Change-Id: I8298d9e0080440fce7401fb931e1af42672711cf
CRs-Fixed: 3359591
Wi-Fi Alliance specification for Automated Frequency Coordination (AFC)
system ensures that the Standard Power Wi-Fi devices can operate in 6
GHz spectrum under favorable conditions, without any interference with
the incumbent devices.
Add support for vendor command/events and corresponding
attributes to define the interface for exchanging AFC requests and
responses between the driver and a userspace application.
Change-Id: I8c894236cdb3a33f6eae5dd43879fc84f29a80dd
CRs-Fixed: 3337619
Add a new subcommand QCA_NL80211_VENDOR_SUBCMD_DOZED_AP to configure
doze mode state on an AP interface. This is also used as an event to
indicate the updated configuration. In doze mode, AP transmits
beacons at higher beacon intervals and RX is disabled.
Uses attributes defined in enum qca_wlan_vendor_attr_dozed_ap.
Change-Id: I183140f0466eb7400cc161afb8c2e295ec587f93
CRs-Fixed: 3267855
During the roam scan, if there are no desired APs found in the partial
frequency list, an immediate full scan on all the supported frequencies
is initiated as a fallback. This would include the 6 GHz PSC
frequencies. Define an attribute to allow that behavior to be modified
to include PSCs only if 6 GHz use has been detected.
Change-Id: I81eb9b20c2953e6b0dbf4138b31547db82d7397f
CRs-Fixed: 3351706
Add QCA_WLAN_VENDOR_ATTR_CONFIG_WFC_STATE vendor attribute,
Userspace uses this attribute to configure wfc state to
Driver/Firmware. Driver/Firmware uses this information to
optimize power savings, rate adaption, roaming, etc.
Change-Id: If58bd1e64216de81af6cf82eaabd740b85729eac
CRs-Fixed: 3343034
During the roam scan, if there are no desired APs found in the partial
frequency list, an immediate full scan on all the supported frequencies
is initiated as a fallback. This flag controls the frequency list
creation for full scan on the following lines.
1 - Full scan to exclude the frequencies that were already scanned by
the previous partial scan.
0 - Full scan to include all the supported frequencies irrespective of
the ones already scanned by partial scan.
Change-Id: Id48ae28e6d0e719b9db9b2e73bd76f9be1ea0b3e
CRs-Fixed: 3343567
Introduce a new attribute to configure access category
override for UDP frames of BE/BK category. Unlike, the
earlier attribute QCA_WLAN_VENDOR_ATTR_CONFIG_UDP_QOS_UPGRADE
which will override for all UDP frames, this attribute is
for overriding only for BE/BK based UDP frames.
CRs-Fixed: 3332609
Change-Id: Ife6104b97bca83653fdcac31f2c91007d1aa6f2a
Introduce a run time roam configuration for "hand off delay for RX".
This value, in milliseconds, will delay the hand off for the specified
time to receive pending RX frames from the current BSS.
Change-Id: I961109a2f9287a611ae8f4b38e2ea824ecf9c559
CRs-Fixed: 3329952
Add a new vendor subcommand
QCA_NL80211_VENDOR_SUBCMD_MLO_PEER_PRIM_NETDEV_EVENT to send notification
to application layer about primary netdev of an MLO peer association.
Also define the attributes present in this subcommand.
Change-Id: I84ba177c5d7155f627d4d3fa86c64c4f9b24951c
CRs-Fixed: 3280634
