Apstats display last tx rate for unicast as well as for multicast
hence we are adding support for last tx rate for multicast
Change-Id: I94cdcbb9c156ecaa4b7a5407a0f0c00dfa9786e9
Provide support for following channel utilization stats:
self_bss_util,obss_util,ap_rx_util,free_medium,
ap_tx_util,obss_rx_util,non_wifi_util
Change-Id: Ib1358988ae0b5794e70ba4348a78646e9d2a6cba
CRs-Fixed: 2298865
Using common function to replace the duplicated rate info code in
statistics of data path for TX, RX and peer info printing.
Change-Id: I80d296001b95d7a5ff11d7ce538e16f86e7e67e8
CRs-Fixed: 2291395
To consolidate the stats spread over across UMAC, OL_IF
layer and process at respective datapaths depending
on platforms.
Change-Id: I87d02c767a309e7aeef88a124567259debc1bba5
CRs-Fixed: 2283286
This change Adds a per-radio command to calculate and fetch
radio activity factor from the driver.
Change-Id: I209a4d93889925b63969d36877127e2a72de25fe
CRs-Fixed: 2266783
Existing antenna gain command does not take odd antenna gain value that is
gains are not supported in steps of 0.5db. antenna_gain_half_db pdev
param provides this support. Added WMI and CDP changes to configure/read
this data.
CRs-Fixed: 2024854
Change-Id: I47da9eed74a1a0180cefb4c3f47bc4340da1bdfd
OL_ATH_PARAM_CBS - Command to enable/disable CBS
OL_ATH_PARAM_DCS_SIM - Command to simulate DCS interferences
OL_ATH_PARAM_CBS_DWELL_SPLIT_TIME - Command to configure
Dwell Split time
OL_ATH_PARAM_CBS_DWELL_REST_TIME - Command to configure
Dwell Rest time
OL_ATH_PARAM_CBS_WAIT_TIME - Command to configure CBS wait time.
OL_ATH_PARAM_CBS_CSA - Command to enable channel switch with CBS.
Change-Id: If1c45c7caa53da7f05e56f23c74cf1b982ea8f48
CRs-Fixed: 2134748
Direct Buffer Rx module has an API to print the status of the rings
per module per pdev. Introduce OL param to support this through
CLI.
Change-Id: Iebbd2c314e72dc0753cdcb581f17d93d3c71a5db
CR-Fixed: 2263968
API for dumping the CE descriptors copies all descriptors for
the given Copy engine id and also copies the SKB packet pointed
by the descriptors till smart_log_skb_sz bytes.
Change-Id: I511bda77319944c1ec2377f716087956ce0637ac
CRs-Fixed: 2008290
Remove NAWDS Rx Drop Count as it is not required,
drop packets in rx where length is not
available.
Change-Id: Ib4b41eefe88410137c3845090783ee43adb9147c
CRs-Fixed: 2191474
There are instances of use of older A_UINT/A_INT.
Replace all such instances with the qdf u_int*_t/int*_t.
Change-Id: I7ce29b03f29a0d1a0cf87cfd3c846f4694da4c2a
CR's-Fixed: 2210869
Donot perform mcast echo check in case of qwrap isolation mode.
In qwrap isolation mode, packets from wired station reaches the wireless
station via the rootap. Thus we need to allow loopback packets in qwrap
isolation mode.
Also add a configuration to set isolation mode.
Change-Id: If4a63abd477596f6b48c6cf9b6e7e5bd84ec95c0
CRs-fixed: 2204033
1) for raw mode, drop frames with invalid size
2) for non-raw mode, fixed issue that
frag list data_len's not properly calculated
The length issues will introduce kernel issues
during skb_linearize() at upper OS network stack layer.
Symptoms:
1)
WARNING: at net/core/skbuff.c:1782
PC is at skb_copy_bits+0x1b8/0x230
2)
kernel BU at net/core/skbuff.c:1615!
PC is at __pskb_pull_tail+0x70/0x2e4
CRs-fixed: 2188754
Change-Id: I848ec976cd922708ffd02d8272ea5a6f3bce2a00
Add htt tx and rx structs from HTT to cdp_pdev_stats.
These Fw tx and rx stats are obtained through HTT events.
athstats application uses cdp_pdev_stats that contains host stats
and fw stats.
Change-Id: Ia063f406bdc6d32a684c4026b8425ecc96faa3db
CRs-Fixed: 2190793
Tx completion success counters are not being updated correctly.
Accumulate successful completions in tx_success variable.
Change-Id: I290e581e93e03ad23e349c9df7834174d6d3a787
CRs-Fixed: 2191599
Firmware will use this configuration to enable/disable the
CCK transmission. By default, the CCK Tx is enabled.
CRs-Fixed: 2191524
Change-Id: I165c3ea10ea3734fc81e7d25fe8ad676afd1b2c1
1. Assert if length received from FW is not equal to
the expected length
2. Count the number of PPDU stats received by host and
print in "iwpriv athX txrx_stats 260"
3. Optimize the PPDU stats tag mask sent to FW for
enhanced stats enabling
Change-Id: I60019de93bb3914955a03546504efc820c960746
CRs-Fixed: 2170704
To expose cdp_pdev_stats to athstats, move cdp_stats from
cdp_txrx_cmn_struct.h to cdp_txrx_stats_struct.h and include
cdp_txrx_stats_struct.h wherever needed
Change-Id: I0e86527d47f5c6056a3bfbf5e8151594879427f3
CRs-Fixed: 2183725
command:-
1. "iwpriv athx s_txpow param1 param2"
2. "iwpriv athx g_txpow param1"
param1 = frame_type<<8+frame_subtype param2 is power_value
if subtype == 0xff means set all subtype of that frame type
Change-Id: I8c68e1ca6a5829a3f0cf01b2c32c3332e1010243
CRs-Fixed: 2175241
Support added for the following:
1. The counters for Rx offer, Tx Offer, MgmtTXFail.
2. Block mgmt frame from a particular mac address.
3. Display NSS for associated clients.
Change-Id: Ic0f6ea8f7b94f998f6a9d2d3e1adc3a71c79056b
Add new pdev param with which firmware can be set to use
a lower number of chains without doing a reset. In response
to this firmware's ratecontrol will select only rates
which can be sent using a lower number of chains, and set
the h/w tx descpriptor's chain select to whatever value
has been configured using this command.
CRs-Fixed: 2123206
Change-Id: Ice713393958c2c2acedba0fe2e9354f3fe3bee75
Private ioctls for external acs operation like
set icm active, get channel load info, clear chan load info,
get nominal noise floor were transported and
handled by spectral module. We seperate this ioctls
from spectral by adding new IWPRIVs(get_icm_active,
set_icm_active, get_nominal_nf, clear_chan_info)and
moving their handlers out of spectral.
CRs-Fixed: 2126313
Change-Id: I8c6b56b85d566f5bc7f6217f6fbc99fa23171cdd
Initialize pdev_id for PDEV stats request and response event.
Add param to set pdev stats request timer.
Change-Id: I11f648070cd39f026129d1cf3aa13bf296d25e6e
Add required WMI commands to communicate support of
EXT NSS Signaling between host and FW. Also, if
EXT NSS Signaling is supported the use new WMI to
communicate the required information between host and FW.
Change-Id: If3e1ef11a55f8fbdffddb3b10963878a6a2ca415
CRs-Fixed: 2089043
Management frames with RX RSSI lower than
user set value will be dropped.
CNSS-CODE-SCAN:: QUICLOST-196308:: Completed
Change-Id: I9af967703182513cb9a51ee96c0954b7d27eaacb
Add counter stats for number of management frames sent via
wmi and number of completions received.
Change-Id: Id5e72858b1e258b089b170a6d15ba395782645cc
CRs-Fixed: 2060117
