This change updates plane's dirty flag with QoS
value to ensure QoS gets reprogrammed with new FPS
settings. This is required as QoS values will change
with FPS.
Change-Id: I377b99da2a640d375bd48477f149197b332e7f7b
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Restart the timeline for the idle power collapse delayed work
timer for every resource control kickoff instead of only during
a power state change. This will prevent entering mode2 at
unexpected times during active scanouts.
Change-Id: I001157ff7e6b6246e26d537e30d8617cab9cb463
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Current computation of line time does not include compression ratio
from either DSC or VDC. This change stores source bpp and target bpp in
sde_crtc during sde encoder mode set to be used while calculating line
time.
Change-Id: Ib1e045dce17fcf006447d4562b402cc3f214ed8c
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
From Lahaina onwards, widebus is enabled for compressed DSI stream.
This change adjusts interface timing parameters to account for widebus.
Change-Id: Ie6b739ed2cdb515064e3a94404b3e0fe07755d7e
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
Current wakeup time is surpassing next vsync and not being used.
This change will use mdp transfer time calculated by dsi to compute
line time in command mode. In video mode, fps will be used to compute
the line time. This line time will be used with current interface
line count to calculate time until the next vsync.
Change-Id: I0b6fc396711ade95ecf95755a907280309af223e
Signed-off-by: Thomas Dedinsky <tdedinsk@codeaurora.org>
This change adds helper to retrieve the kms from
the drm_enc structure and provides additional error
checking which can be avoided in the callers.
Change-Id: Id8ba07a2d48a605dd4ce846e5d61f302e5861b4d
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Some of the features in the DPU hardware needs planes to be staged but
it should not be blended in the layer mixer. Change adds support for drm
driver client to set the blend type on the plane and updates driver code
to skip staging the plane.
Change-Id: I1e8c7f6ce5617820ea8b24419e0d4d27b481819b
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
In dual display with continuous splash, when autorefresh gets
disabled in primary on first commit, solver mode gets enabled
and mdp_clock is gated whenever primary enters idle. The
secondary data path will get gated during that time and not advance
anymore. Asynchronous gating of the mdp_clock during operation
can also hang the secondary path. This change avoids entering
the solver mode which fixes the timeout in the autorefresh
disable sequence in the secondary.
Change-Id: I7562ce2ad72d3bb8e8b6b8f356fab6def0caaf92
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
After coming out of idle state, bus vote is governed only
if there any change in perf compared to before entering idle
state. If the perf is same before and after the idle state,
bus update request is not considered and min bus votes are
voted. This change resets crtc core perf while entering
idle state always in command mode.
Change-Id: If172207422adc25fcee497aebe23aad1ac6ce7cc
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
Input event handler can be unregistered without being
registered in the case where DMS or DYN_CLK flags
are enabled on first commit, add changes to handle
this sequence.
Change-Id: Idf4f9f310b5d56df396bfa5c6477e94d4fae7a9f
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
Add a null check for encoder before accessing ops.
Change-Id: I7b80f4aded89d6c6fe68a0d016f64e14f04f2e58
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Reset MDP ctl path and DSI ctl on autorefresh
disable failure. This will enable the hardware
to recover from the hang.
Change-Id: Ia9acc8573c22e0713179ef4f6ef604caacabfadb
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
This change adds logic to align timing engine vsync with panel
tear check if it is supported.
Change-Id: I3f881f392929589848c893f567822b21c0650000
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Add underrun line count information for each underrun.
Change-Id: I34a740c33240fa8d444f4bbc3b8b014b0282fca1
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Using individual flush functions for each active hw blk
is not scable-able for future use. Clean up the ops to merge
all flush functions into one and manage HW block id
with same API.
Change-Id: I62afbc51fa7d345b3a1f5721e5e09661a4215f7a
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Add changes to commit and decrement only those
hardware resources which are required for the modeset.
Timeline of Commit C1 with CWB modeset:
---> Atomic_check
Primary encoder has allocated required HW resources.
CWB encoder has allocated required HW resources.
---> Atomic_commit
On primary encoder, connector is seamless hence
there is no virt_modeset call.
On CWB encoder, there is virt_mode_set call
and during commit HW blocks there is unconditional
decrement for all the HW blocks with rsvp_nxt.
This change ensures hardware blocks are available during
dp display mode validations.
Change-Id: Ifd9439cfc96e727c3093af5f47802c8367775cd7
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
This change programs dither based on user mode input data and
reprograms the dither when device comes out of power collapse.
Change-Id: I83be20c8eb2dc2221cc57cd2395f6512338ff6ef
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
In the current kernel version calling kthread_mod_delayed_work
in irq context is not allowed. Due to this resource control state
change to idle on frame done is handled in display thread context.
Change-Id: I709f7e04ac23d7dde72cea1c19d3767b6abc147e
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Add support to configure the DPU pipeline to support VDC-m
topologies.
Change-Id: Ib8ce9a0eaeaa838759fb09cb2ee164d4765e4989
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Certain DSC hw blocks only support 444 mode, while others
support both 444 and 422 modes. This change adds support in
resource manager to check the hw resource requirement with
the capability of the block and then reserve the correct
hw resource.
Change-Id: If85beb2f2f25e9eb7f8a8321c94b57878d048369
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
This change checks the capabilities of pingpong block to
check if it needs to call the pingpong api to enable or
disable the dsc. Certain hw versions do not have support
in pingpong block to enable/disable the dsc instead the
dsc block itself have the hooks to control the DSC.
Change-Id: I17dd45479cc33ff2e81f6a6e5a5a8704562dfd24
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
This change enforces dp, dsi and the sde drivers to use the
drm framework defined dsc_config data structure. As a part of this,
it introduces the sde_dsc_helper API to configure the dsc params
and creating a PPS command. Earlier each driver implemented it's
private versions leading to duplication of code. Additionaly the
helper api supports DSC spec 1.2 422 and 420 mode.
Change-Id: I25933fab08cdabbc6787079926885d1a78945e97
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
This change introduces dce api to the encoder component to
configure supported compression hw. This allows encoder to
remain independent of the compression type and specification
supported by the hw.
Change-Id: I6bc35289495b05f57a83323cbab1ea14e9e15db0
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
This change moves the DSC implementation into a separate file.
This is required to add support for new compression algorithms.
This cleanup change also, moves struct sde_encoder_virt
declaration to the encoder header file.
Change-Id: Idc3b96e65fcce2a7ee6e17af604cec0cb574f6f7
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Use the DRM APIs for walking the list of connectors. This ensures
the proper locks are taken to prevent possible corruption by other
threads.
Change-Id: Iacdd1c6ad8eab224ceac550e0229489851a09706
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Migrate to icb framework API in drm and sde driver. And
also removes old msm_bus custom APIs from the driver.
Change-Id: Ifcf6d6f157594638075742fe328b29a9be065bca
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
This snapshot change adds downstream support
for drm 5.x+(msm_lahaina branch) linux kernel.
Change-Id: Ia691c95da155a00e449c91a2f1a5b20a8e71aed4
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
The RSCC static wakeup and the bandwidth trigger for
the downvotes are based on the prefill lines. Reduce
the prefill lines based on the panel vertical front
porch to avoid issuing bw downvotes during active
region of the previous frame.
Change-Id: I408209ba308c32e71d9f70c5ed7e60c134877c84
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
The encoder idle work is scheduled during the frame-done event
to be executed after a timeout. During the execution, the check
for any on-going/pending frames is invalid as it checks for > 1.
Fix it to check for any non-zero frame-pending and avoid
power-collapse.
Change-Id: If7715ee56cc9bfa63787811458f4fc91de540013
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add changes to support avr mode config update during
prepare commit which happens before gpu fence wait
for the input buffers.
Change-Id: Ib2cb5b7e1f10501914c003f6cf066b85048f79d4
Signed-off-by: Kalyan Thota <kalyant@codeaurora.org>
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
Switch to watchdog vsync whenever panel jitter is
identified during frame-transfer on command mode display.
This would allow the HW to finish processing the frame
with watchdog vsync source. Switch back to default vsync
source after the frame-transfer is complete. This would
help in the MDP hang issues in panels that generate TEs
with thresholds greater than the projected jitter.
Change-Id: Ic3fa78d90e7f44cb0186857716ac27e72505fd32
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add null check before accessing pingpong hw block
allocated during mode set to physical encoder.
Change-Id: Ic464e7c7087f280b1198f6b7485bc0763322c532
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
During SUI validations and transitions, the encoders
are iterated to find the panel-mode. If concurrent
writeback is enabled, it is assumed as video mode.
Add check to consider only the built-in display
panel mode during sui to avoid wrong interpretation.
Change-Id: I2901eb29a0799571a95f6ab6f9f3f2c6154424c5
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Input handler is only registered in command mode, so add this change
to ensure that the input handler will be only unregistered in command
mode.
Change-Id: I15f652439339eee45b0ed3c011aa2922151f68ba
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
2 Frames transfer pending is possible with posted start.
One ongoing frame and another triggered frame. Current SW
waits for pp_done interrupt if pending frame count is greater
than 1. It is possible that interrupt may be missed for ongoing
frame. In that case, SW should run pp_done wait for one by one
frame instead of two frames together. It allows encoder to
check the ctl scheduler status and trigger the frame done
event on time.
Change-Id: I4817842292d96747890ee70da8a5bdf9b56816ed
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
