Change adds support for splitlink and disables
dsc merge or 3dmerge which is not needed for splitlink.
Change-Id: I77a794d3ea6f53988f493a7af792add81abb22f0
Signed-off-by: Vara Reddy <varar@codeaurora.org>
On Waipio target, periph top0 block has been removed from mdp top
register block. This creates a hole in the accessible register space
and can lead to NOC errors. In addition, accessing register offset
for invalid dedicated concurrent write back can lead to NOC errors.
This change adds support for indicating if the periph block has been
removed and splitting the mdp top register block into two for reg dump.
In addition, it only registers valid dcwb to be reg dumped by
adding a dcwb count.
Change-Id: I23931cdf5ce4d858a3837f3946b54d9231e0db27
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Watchdog timer is moving from TOP to INTF. This change adds
support for movement and ensures backwards compatibility.
Vsync select only needs to specify whether or not to use
Timer 0 associated with the interface. It does not need to
select between Timer 0-4.
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Change-Id: I9d89a8cb1ea607e9fc0bdbffa0a6a9acceff7f13
This change replaces kzfree with kfree as kzfree has been
renamed.
While moving to the latest 5.10 tip, additional small changes
were required to resolve compilation issues:
set_dma_ops has moved from dma-mapping to dma-map-ops header.
This change includes the new header file required.
drm_panel_add returns void, this change removes the expected
return value check.
drm_prime_pages_to_sg takes an additional parameter. This change
passes in the drm_device pointer the function is looking for.
Remove an unused variable in sde_crtc vblank function.
Change-Id: I47c085c0cb64432873c2e750ae64cbdc2b5340da
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
This reverts commit e8309fcbf5. Removing
the scratch register logic to pass information between the VMs as the
design changed from kernel to user-mode for passing the mode information
through qrtr from primary-vm to trusted-vm.
Change-Id: Ibfa4b0004496f68b272da808e866f5226b02c013
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Use MDP scratch registers to pass drm mode index information
between the VMs. Expose the APIs which LA VM can use to set
the current mode for all active displays before handoff.
LE VM relies on this information to set the corresponding
display in correct mode during handoff.
Change-Id: I4569dd58e953e588bca816ac718335d3f3f7e29b
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
CWB may trigger frame missed message if interrupts
are disabled on specific CPU. WB2 will only find single
interrupt status for two posted start triggered frame.
SDE driver will start checking the xin client clock
status for wb2 timeout case to trigger the valid
frame done status.
Change-Id: I16a99667116732002e6dec8a18330f8b45199387
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Add SID setup function to help programming
the SIDs for all the pipes and lutdma xin clients
based on the VM.
Change-Id: Iea598303b480b33de8750e0988129dd5cdfe7572
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Autorefresh might be still in enabled state after
write_ptr reached to display height. This patch
checks the autorefresh status bit and keeps polling
the bit till autorefresh sequence is in enabled
state. It times out after 1 second if autorefresh
is still in enabled state.
Change-Id: I5d4f4cb35e5cc8c680c1878f52cee385f709d764
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Register the MDSS_HW block (at base offset 0) for access via the
sde_reg node in SDE's debugfs directory. This is needed for
validating correct UBWC register programming.
Change-Id: I2494e066a7603747f2ec12546e58a17f2120a521
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Add support for HDR memory pool blocks aligned to a 4k page
address. This feature must be enabled by setting the
corresponding feature bit for supported targets.
Change-Id: I696ffb6ce3b607741f26496d40e2296c4c5bdb4b
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Reverting the change to check for LTM SW fuse to install LTM properties
during probe since LTM SW fuse is enabled later.
This reverts commit 652b195ba4.
Change-Id: I19b3e04ff7caaad5de896fbcf433c3b1863ac4f9
Signed-off-by: Ramkumar Radhakrishnan <ramkumar@codeaurora.org>
Add checks for LTM sw fuse value to only install the LTM properties
when the LTM sw fuse is set to enable.
Change-Id: I6876bfcf12ddb912e7b7a80e07c33108fd4b85b9
Signed-off-by: Ping Li <pingli@codeaurora.org>
This change ports the missing changes from 4.14 to 4.19
that were missed. It includes changes up until
commit 0f8fb25421ff ("cnss2: Add device version to
SOC info structure").
Change-Id: Idfdfe891f146e389e3c65cc3fc4c98d93220e789
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
This snapshot ports changes from 4.14 to 4.19 into
the msm and sde layer. Snapshot was taken as of
commit 0f8fb25421ff ("cnss2: Add device version to
SOC info structure").
Change-Id: I59b799a78319c2db6930a2a10bc38976f8c09898
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
This change brings msm display driver including sde,
dp, dsi, rotator, dsi pll and dp pll from base 4.19 kernel
project. It is first source code snapshot from base kernel project.
Change-Id: Iec864c064ce5ea04e170f24414c728684002f284
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
