Unmult feature is currently using offsets from previous targets.
This leads to unexpected alpha transparency errors on screen.
This change updates the new offsets based on hw version and
retains the original offsets for backward compatibility.
Change-Id: Icdba050371a583f1a20b91a451be3324de12c2cf
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
TUI clients are the display sub-drivers that participate
during the TUI transition. They register with the display
TUI notification framework with a list of callbacks functions
that will be invoked during pre/post transitions and for quering
I/O memory that need to be access controlled. This change
adds RSC to the TUI client list.
In Trusted VM, all the sub-drivers are not enabled to avoid
any re-configuration of respective module registers. But the
TUI framework need to know the sub-driver I/O memory ranges
in order to accept the I/O memory list lent by the HLOS VM.
So, SDE provides them ranges by reading from a custom
devicetree property.
Change-Id: I2c4b254d539d04771339ae4a7bf4d296b7a7f91a
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
This change adds allowed_dsc_reservation_switch to determine if
dsc seamless switch is supported for DP. Also, based on the
flag, it determines and populates the required number of
available resources for DP.
Change-Id: I9cd7219a50d352369c5bc8386ce7dc25c30b80b6
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
This change sets a flag to true if a mixer is a virtual mixer.
Virtual mixers will skip setting up mixer ops and debug register
dumps as their range is not valid. Since mixer ops are no longer
guaranteed to be set, add null checks before using these ops.
Change-Id: Idfe7e1e2b893dadbbe6756d69d0c4ca4fa6ae4ce
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Add support to send a data packet of info, written to
predefined buffers, providing information about each submitted frame.
Add required UAPI definitions for frame data buffers and event
notification.
Add support to read ubwc statistics from hw, based on defined rois.
Change-Id: I51f279de98ae4e2a02b0df6943d334764011d5db
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Add AVR step support so SW can trigger a late frame and instead
of immediately triggering, HW will perform the update at the
start of the next step interval. This allows for a fixed SW
vsync timeline to be maintained in userland, eliminating the
usual drift from the actual HW vsync caused by a late frame.
This change adds AVR_STEP support via a DRM property.
Change-Id: I4cf8a296989805f134c2165a3bed0b050bb09c96
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
This change exposes whether or not inline rotation threshold
should be taken into consideration or skipped based on
skip_inline_rot_threshold property.
Change-Id: I4108f6ae86039815d28836bfa0e184737aaddd8a
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Report the AVR_STATUS which indicates if there's a pending
trigger when Adaptive Variable Refresh feature is enabled.
This allows SW to detect whether the old frame is repeated
or if the new frame was taken when the trigger is very
close to Vsync.
Change-Id: I6b04482e5c4c3bb92bad426c529c1fd3612d41c3
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Add cwb dither support.
Catalog: Read dtsi value of cwb dither in pp parse part.
Wb: Install blob property for cwb dither.
Wb hw: Adds a new wb ops function to program cwb dither hardware.
CRTC: To ensure that userspace can check whether cwb dither is supported,
added "has_cwb_dither" to sde kms info.
PingPong: In order to reuse dither's map array, move dither_depth_map array
to pp header file.
Change-Id: I77e6a052a00b7c649452103145e5d7b4c8deb3a2
Signed-off-by: Yuchao Ma <yuchaom@codeaurora.org>
This change provides support to have per target configuration
of the maximum value for fal1 threshold & updates value for waipio
as per qos recommendation.
Change-Id: I48df0d1c58a8de80f40200b35e406d07621a3f68
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
This change updates inline rotation version and handles listing
of color formats supported by inline rotation in waipio target.
Change-Id: Ibefc4fdfcf65c7a42642c15af5cf5e873a5b67de
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Add support for the option to enable microidle FAL1 only setting.
Previously microidle enabled would automatically have both
FAL1 and FAL10. Now in cases of higher FPS or DFPS we can
choose to enable FAL1. This change also adds qos recommended
waipio target specific fps limits for fal1 and fal10.
Change-Id: I7aa7d003afc3ac77c671b2467b0e6dedaae772aa
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Rotator llcc is no longer supported. This change removes the
unused code.
Change-Id: Ia1d95e3f4386d25e0d2e06a87802b3f5b694998d
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Add precise vblank timestamp support through the DRM framework.
Implement the vblank related hooks to get the vblank count and
timestamp. Use MDSS 8.x, hardware feature that supports logging
of the vsync timestamp counter which can be used to derive the
accurate kernel timestamp. The current ktime would be returned
for older targets to support backward compatibility.
Change-Id: I2d35ed4a643a519e602278b6d16e67ccee16a60b
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
From MDSS 8.x, vsync timestamp counter register is added in all the
interfaces. Add interface to get the vsync counter and use the global
qtmr reference counter to get the counter delta. This can be used
with reference to the curret ktime to deduce the accurate vsync
timestamp. This utility is intended to be used for setting the vblank
and retire fence timestamps which would be notified to user-mode.
Change-Id: I608a284c035cda50053eedbb311f1f54b3d3d557
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
From MDSS 8.x INTF line/frame counters can be reset through
a register. Reset these counters during timing engine enable /
tear-check enable to keep track of meaningful counters, which
would be useful during debugging. Additionally, reset the
counters during cont-splash modeset to track the number of
auto-refresh frames while disabling it during the first frame.
Change-Id: I66b45f5b29793df1fb4635972b1c614ad8c3b5b3
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
On Waipio target, periph top0 block has been removed from mdp top
register block. This creates a hole in the accessible register space
and can lead to NOC errors. In addition, accessing register offset
for invalid dedicated concurrent write back can lead to NOC errors.
This change adds support for indicating if the periph block has been
removed and splitting the mdp top register block into two for reg dump.
In addition, it only registers valid dcwb to be reg dumped by
adding a dcwb count.
Change-Id: I23931cdf5ce4d858a3837f3946b54d9231e0db27
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
This change exposes capabilities for CWB ROI to userspace
as well as implements the cropping feature which is now supported.
Change-Id: Idf76727175bf7c183367be715eaa45f3a432640c
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Noise layer feature is supported on certain version of dpu. Change adds
parsing support for the feature into the sde hw catalog.
Change-Id: I8037cab1d7bba1ea74c13c917ee5a36c50dc50cf
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Add dummy layer mixer blocks to be used for dedicated
CWB.
Change-Id: Ie1fe4fa7502cf5cf4dba3f2c129257887a20b7ad
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Add new capture/tap point as CRTC property for
D-CWB feature. Update the hardware blocks and
corresponding APIs to configure D-CWB data path.
Add new hardware pingpong blocks that
are dedicated for CWB.
Change-Id: I22576df1768b50f9f47d8527f62913b01ff4d9a7
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Watchdog timer is moving from TOP to INTF. This change adds
support for movement and ensures backwards compatibility.
Vsync select only needs to specify whether or not to use
Timer 0 associated with the interface. It does not need to
select between Timer 0-4.
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Change-Id: I9d89a8cb1ea607e9fc0bdbffa0a6a9acceff7f13
REG DMA programming occurs with respect to the sub-block top,
but all registers catalogued are with respect to sspp top.
This change adds support for handling the updated
sspp sub-block top and retains a default value for backward
compatibility.
Change-Id: I5a6364b17e817e38cd5afbcc67ed9df98c024008
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Introduce support for the FP16 format and FP16 color processing
blocks. This includes support for FP16, FP16 UBWC, and inline
rotation on tiled FP16 pixel data.
Change-Id: I06a70cab5447140598682f687129d4f8662524b2
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
This change adds support for error checking ubwc and meta error status
based off whether REC0 or RECT1 is used.
Change-Id: I7c39755da99a9d6c0d02b4ef16fa93b8ec7458a9
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Add version checks for Waipio (MDSS v8.1.0) and enable
all lahaina features.
Change-Id: I9b19af98878cf3c6abbe06a74f88f4fd99ff4959
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Allow for overriding color processing features that normally uses
DSPP flush to use LM flush instead. This is required on targets
where some of the DSPP features have been tied to LM flush bits.
This changes adds a field in color processing node to track if the
override is needed and enables LM flush override for rounded corner
on target requiring it.
Change-Id: I584bd7b20dfc9fc7795b1b3b10e2f17a82945ce4
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
A new status register was added in DPU 5.x to INTFs to allow for
confirmation when the timing engine is disabled. This
functionality was controlled via an overloaded feature flag
which is used to enable INTF tear-check ops (also added in DPU
5.x). External displays support INTF_STATUS but have no use for
any tear-check functions. Separate these features so they can be
enabled individually on the interfaces which support them.
Change-Id: Ib8548619cb58bf19b7c02211ead7f33f52ffeae4
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Display input touch event is replaced with IOCTL in performance HAL
to early wake up DSI clock.
Add a property to enable/disable display input touch event for backward
compatibility.
Change-Id: Ib6b9123d726e79a2927b05d1ef77c343f01d0c5e
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
Cache controller is not a sde property, add
proper parsing logic to get the compatible version
of llcc cache.
Featurise system cache support with a catalog entry as it
provides a finer control to enable/disable llcc
for display.
Change-Id: I07fa8e144d0a4fa32ab16e46142c7b68f771d9c7
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Add support in hw catalog to parse the maximum number of concurrent
TUI displays supported in SDE.
Change-Id: Ic1f4d93afc472c2fa073e1d292ebd1d27e40f4ec
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
