This changes the fb name from "nouveaufb" to "nouveaudrmfb".
Aside: I wonder whether the in_interrupt() check is good enough for
the nouveau acceleration. Cargo-cult says drm_can_sleep() is needed,
which isn't actually working if you pick a .config without PREEMPT.
For the generic fbdev defio support we've gone with offloading
everything to a worker. For the non-accel callbacks (set_par, blank
and friends) checking for oops_in_progress is good enough to catch all
the evil calling contexts.
v2: Rebase
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-14-daniel.vetter@ffwll.ch
Looking at the oldest/most popular drivers ${driver}drmfb seems to be
the standard, except i915.ko went with "inteldrmfb". I guess renaming
that for consistency won't hurt, it definitely confused me when I
started with kms 10 years ago.
I hope this never became uapi ... worst case drivers can overwrite it
after having called fill_info().
Since subsequent patches change this for some drivers later on in the
series, here's the exhaustive list of where all fix.id is used:
- /proc/fb which prints the minor number and fix.id name.
- per-fb sysfs name file
- getfix ioctl, which is used by fbset only to print out the name when
dumping information
- lots and lots of places in dmesg, anytime anything happens with an
fbdev really
I think minimal to 0 chances that changing this will screw up a config
script or something, since outside of informational message it's not
used by anything to identify which fbdev maps to which minor. After
all the last fbset release is from 1999, and that predates even devfs
I think.
v2: Rebase and amend commit message, thanks to Ilia for pointing out
that this needs to be spelled out.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-2-daniel.vetter@ffwll.ch
The fbdev split between fix and var information is kinda
pointless for drm drivers since everything is fixed: The fbdev
emulation doesn't support changing modes at all.
Create a new simplified helper and use it in the generic fbdev
helper code. Follow-up patches will beef it up more and roll
it out to all drivers.
v2: We need to keep sizes, since they might not match the fb dimensions
(Noralf)
v3: Fix typo in commit message and remove extraneous line in kerneldoc (Noralf)
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-1-daniel.vetter@ffwll.ch
When the DRM driver for the meson platform was created, the bindings
required that the DMC register region was provided.
Through those DMC registers, the display driver could configure an IP
called "canvas", a video lookup table used by the display IP.
It was later discovered that "canvas" is actually an IP shared by other
components than display: video decoder, 2D engine.. and that it wasn't
possible to keep the canvas code in DRM.
Over the past few months, incremental efforts have been deployed to
create a standalone meson-canvas driver [1], and the DRM driver was
patched to optionally use it if present [2].
This is the final step of those efforts where we simply remove any
control over DMC that the meson DRM driver has.
Please note that this breaks compatibility with older DTs that only
provide the DMC register range but not the amlogic,canvas node.
[1] https://patchwork.kernel.org/cover/10573771/
[2] https://patchwork.freedesktop.org/series/52076/
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190311105144.7276-2-mjourdan@baylibre.com
This adds a library for shmem backed GEM objects.
v8:
- export drm_gem_shmem_create_with_handle
- call mapping_set_gfp_mask to set default zone to GFP_HIGHUSER
- Add helper drm_gem_shmem_get_pages_sgt()
v7:
- Use write-combine for mmap instead. This is the more common
case. (robher)
v6:
- Fix uninitialized variable issue in an error path (anholt).
- Add a drm_gem_shmem_vm_open() to the fops to get proper refcounting
of the pages (anholt).
v5:
- Drop drm_gem_shmem_prime_mmap() (Daniel Vetter)
- drm_gem_shmem_mmap(): Subtract drm_vma_node_start() to get the real
vma->vm_pgoff
- drm_gem_shmem_fault(): Use vmf->pgoff now that vma->vm_pgoff is correct
v4:
- Drop cache modes (Thomas Hellstrom)
- Add a GEM attached vtable
v3:
- Grammar (Sam Ravnborg)
- s/drm_gem_shmem_put_pages_unlocked/drm_gem_shmem_put_pages_locked/
(Sam Ravnborg)
- Add debug output in error path (Sam Ravnborg)
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313004344.24169-1-robh@kernel.org
Current driver sets the tile property only for DP MST connectors.
However there are some tiled displays where each SST connector
carries a single tile. So we need to attach this property object
for every connector and set it for every connector (DP SST and MST).
Plus since the tile information is obtained as a result of EDID
parsing, the best place to update tile property is where we update
edid property.
Also now we dont need to explicitly set this now for MST connectors.
This has been tested with xrandr --props and modetest and verified
that TILE property is exposed correctly.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313021722.10068-1-manasi.d.navare@intel.com
The list of modifiers to be supported for each plane has been dynamically generated
from 'malidp_format_modifiers[]' and 'malidp_hw_regmap->features'.
Changes from v1:-
1. Replaced DRM_ERROR() with DRM_DEBUG_KMS() in malidp_format_mod_supported()
to report unsupported modifiers.
Changes from v2:-
1. Removed malidp_format_mod_supported() from the current patch. This has been added
in "PATCH 7/12"
2. Dynamically generate the list of modifiers (to be supported for each plane) from
'malidp_format_modifiers' and features.
Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291767/?series=57895&rev=1
Considering the fact that some of the AFBC specific pixel formats are expressed
in bits per pixel (ie bpp which is not byte aligned), the pitch (ie width * bpp)
is not guaranteed to be aligned to burst size (ie 8 or 16 bytes).
For example, DRM_FORMAT_VUY101010 is 30 bits per pixel. For a framebuffer of
width 32 pixels, the pitch will be 120 bytes which is not aligned to burst size
(ie 16 bytes) for DP650.
Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291764/?series=57895&rev=1
Formats like DRM_FORMAT_VUY101010, DRM_FORMAT_YUV420_8BIT and
DRM_FORMAT_YUV420_10BIT are expressed in bits per pixel as they have a non
integer value of cpp (thus denoted as '0' in drm_format_info[]). Therefore,
the calculation of AFBC framebuffer size needs to use malidp_format_get_bpp().
Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291766/?series=57895&rev=1
In malidp, the writeback pipeline does not support writing crtc output
to a framebuffer with modifiers ie the memory writeback content is
devoid of any compression or tiling, etc.
So we have added a commit check in memory writeback encoder helper function
to validate if the framebuffer has any modifier and if so, return EINVAL.
Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291765/?series=57895&rev=1
The newly supported AFBC YUV formats have the following rotation memory
constraints (in DP550/DP650).
1. DRM_FORMAT_VUY888/DRM_FORMAT_VUY101010 :- It can rotate upto 8
horizontal lines in the AFBC output buffer.
2. DRM_FORMAT_YUV420_8BIT :- It can rotate upto 16 horizontal lines
in the AFBC output buffer.
Also some of the pixel formats are specified in bits per pixel (rather
than bytes per pixel), so the calculation needs to take note of this.
Besides there are some difference between DP550 and DP650 and these are
as follows:-
1. DRM_FORMAT_X0L2 (in uncompressed format) does not support rotation in
DP550. For DP650, it can rotate upto 16 horizontal lines in the AFBC
output buffer, whereas in DP550 (with AFBC), it can rotate upto 8
horizontal lines.
2. DRM_FORMAT_YUV420_10BIT :- It can rotate upto 8 horizontal lines in
dp550 and 16 horizontal lines in DP650.
Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291763/?series=57895&rev=1
We need to define a common list of format modifiers supported by each of
the Mali display processors.
The following are the constraints with AFBC:-
1. AFBC is not supported for the formats defined in
malidp_hw_format_is_linear_only()
2. Some of the formats are supported only with AFBC modifiers. Thus we have
introduced a new function 'malidp_hw_format_is_afbc_only()' which verifies
the same.
3. AFBC_FORMAT_MOD_YTR needs to be provided for any RGB format.
4. Formats <= 16bpp cannot support AFBC_FORMAT_MOD_SPLIT.
5. CBR should not be set for non-subsampled formats.
6. SMART layer does not support framebuffer with AFBC modifiers.
Return -EINVAL for such a scenario.
7. AFBC_FORMAT_MOD_YTR is not supported for any YUV formats.
8. Formats which are subsampled cannot support AFBC_FORMAT_MOD_SPLIT.
However in DP550, YUV_420_10BIT is supported with AFBC_FORMAT_MOD_SPLIT.
This feature has been identified with
MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT.
9. In DP550 and DP650, for YUYV, the hardware supports different
format-ids to be used with and without AFBC modifier. We have used the
feature 'MALIDP_DEVICE_AFBC_YUYV_USE_422_P2' to identify this
characteristic.
10. DP500 does not support split mode (ie AFBC_FORMAT_MOD_SPLIT). We have
used the feature 'MALIDP_DEVICE_AFBC_SUPPORT_SPLIT' to identify the DPs
which support SPLIT mode.
11. DP550 supports YUV420 with split mode. We have defined the feature
'AFBC_SUPPORT_SPLIT_WITH_YUV_420_10' to identify this characteristic.
Changes since v1:-
- Merged https://patchwork.freedesktop.org/patch/265215/ into this patch
- As Liviu pointed out in the last patch, we can pull the checks outside
of the 'while (*modifiers != DRM_FORMAT_MOD_INVALID)' loop
- Rebased
Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291762/?series=57895&rev=1
We have added support for some AFBC only pixel formats like :-
DRM_FORMAT_YUV420_8BIT (single plane YUV 420 8 bit format)
DRM_FORMAT_VUY888 (single plane YUV 444 8 bit format)
DRM_FORMAT_VUY101010 (single plane YUV 444 10 bit format)
DRM_FORMAT_YUV420_10BIT (single plane YUV 420 10 bit format)
Generally, these formats are supported by our hardware using the same
hw-ids as the equivalent multi plane pixel formats.
Also we have added support for XYUV 444 8 and 10 bit formats
Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291761/?series=57895&rev=1
Added the AFBC decoder registers for DP500 , DP550 and DP650.
These registers control the processing of AFBC buffers. It controls various
features like AFBC decoder enable, lossless transformation and block split
as well as setting of the left, right, top and bottom cropping of AFBC
buffers (in number of pixels).
All the layers (except DE_SMART) support framebuffers with AFBC modifiers.
One needs to set the pixel values of the top, left, bottom and right
cropping for the AFBC framebuffer.
Cropping an AFBC framebuffer is controlled by the AFBC crop registers.
In that case, the layer input size registers should be configured with
framebuffer's dimensions and not with drm_plane_state source width/height
values (which is used for non AFBC framebuffer to denote cropping).
Changes from v1:
- Removed the "if (fb->modifier)" check from malidp_de_plane_update()
and added it in malidp_de_set_plane_afbc(). This will consolidate all the
AFBC specific register configurations in a single function ie
malidp_de_set_plane_afbc().
Changes from v2:
- For AFBC framebuffer, layer input size register should be set to
framebuffer's width and height.
Changes from v3:
- Rebased on top of latest drm-misc-next
- Some cleanups/sanity changes based on Liviu's comments
Changes from v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
