dc28abd85186f16dafa247ef87c1958e23b7f59c
131 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
ab4d1ca6f4 |
Merge android-5.4.7 (861433ef ) into msm-5.4
* refs/heads/tmp-861433ef: ANDROID: Kconfig.gki: Remove most of the built in qcom clks ANDROID: serdev: Fix platform device support Revert "rpmsg: glink: Set tail pointer to 0 at end of FIFO" Revert "PM / QoS: Redefine FREQ_QOS_MAX_DEFAULT_VALUE to S32_MAX" Revert "UPSTREAM: firmware/qcom_scm: Add scm call to handle smmu errata" Revert "UPSTREAM: firmware: qcom_scm-64: Add atomic version of qcom_scm_call" Revert "UPSTREAM: cpufreq: qcom-hw: Move driver initialization earlier" Linux 5.4.7 iwlwifi: pcie: move power gating workaround earlier in the flow nbd: fix shutdown and recv work deadlock v2 mmc: sdhci: Add a quirk for broken command queuing mmc: sdhci: Workaround broken command queuing on Intel GLK mmc: sdhci-of-esdhc: fix P2020 errata handling mmc: sdhci: Update the tuning failed messages to pr_debug level mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add erratum A-009204 support" mmc: sdhci-msm: Correct the offset and value for DDR_CONFIG register ocxl: Fix concurrent AFU open and device removal powerpc/irq: fix stack overflow verification powerpc/vcpu: Assume dedicated processors as non-preempt x86/mce: Fix possibly incorrect severity calculation on AMD x86/MCE/AMD: Allow Reserved types to be overwritten in smca_banks[] x86/MCE/AMD: Do not use rdmsr_safe_on_cpu() in smca_configure() x86/intel: Disable HPET on Intel Coffee Lake H platforms KVM: arm64: Ensure 'params' is initialised when looking up sys register KVM: arm/arm64: Properly handle faulting of device mappings kvm: x86: Host feature SSBD doesn't imply guest feature AMD_SSBD kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD KVM: PPC: Book3S HV: Fix regression on big endian hosts iocost: over-budget forced IOs should schedule async delay ext4: validate the debug_want_extra_isize mount option at parse time ext4: unlock on error in ext4_expand_extra_isize() ext4: check for directory entries too close to block end ext4: fix ext4_empty_dir() for directories with holes clk: imx: pll14xx: fix clk_pll14xx_wait_lock clk: imx: clk-composite-8m: add lock to gate/mux clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_table pinctrl: baytrail: Really serialize all register accesses serial: sprd: Add clearing break interrupt operation tty/serial: atmel: fix out of range clock divider handling staging: comedi: gsc_hpdi: check dma_alloc_coherent() return value platform/x86: hp-wmi: Make buffer for HPWMI_FEATURE2_QUERY 128 bytes intel_th: msu: Fix window switching without windows intel_th: Fix freeing IRQs intel_th: pci: Add Elkhart Lake SOC support intel_th: pci: Add Comet Lake PCH-V support USB: EHCI: Do not return -EPIPE when hub is disconnected mm: vmscan: protect shrinker idr replace with CONFIG_MEMCG KEYS: asymmetric: return ENOMEM if akcipher_request_alloc() fails cpufreq: Avoid leaving stale IRQ work items during CPU offline efi/memreserve: Register reservations as 'reserved' in /proc/iomem spi: fsl: use platform_get_irq() instead of of_irq_to_resource() spi: fsl: don't map irq during probe usbip: Fix error path of vhci_recv_ret_submit() usbip: Fix receive error in vhci-hcd when using scatter-gather can: flexcan: add low power enter/exit acknowledgment helper ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangs s390/ftrace: fix endless recursion in function_graph tracer md: avoid invalid memory access for array sb->dev_roles RDMA/siw: Fix post_recv QP state locking ath10k: Revert "ath10k: add cleanup in ath10k_sta_state()" drm/amdgpu: fix uninitialized variable pasid_mapping_needed usb: xhci: Fix build warning seen with CONFIG_PM=n spi: cadence: Correct handling of native chipselect spi: dw: Correct handling of native chipselect selftests: net: tls: remove recv_rcvbuf test can: kvaser_usb: kvaser_usb_leaf: Fix some info-leaks to USB devices can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment can: flexcan: fix possible deadlock and out-of-order reception after wakeup can: j1939: j1939_sk_bind(): take priv after lock is held can: m_can: tcan4x5x: add required delay after reset can: xilinx_can: Fix missing Rx can packets on CANFD2.0 iommu/vt-d: Allocate reserved region for ISA with correct permission iommu/vt-d: Set ISA bridge reserved region as relaxable iommu/vt-d: Fix dmar pte read access not set error iommu: set group default domain before creating direct mappings iommu: fix KASAN use-after-free in iommu_insert_resv_region tpm: fix invalid locking in NONBLOCKING mode tpm_tis: reserve chip for duration of tpm_tis_core_init mmc: mediatek: fix CMD_TA to 2 for MT8173 HS200/HS400 mode Revert "mmc: sdhci: Fix incorrect switch to HS mode" btrfs: don't prematurely free work in scrub_missing_raid56_worker() btrfs: don't prematurely free work in reada_start_machine_worker() MIPS: futex: Restore \n after sync instructions net: wireless: intel: iwlwifi: fix GRO_NORMAL packet stalling ibmvnic: Fix completion structure initialization RDMA/bnxt_re: Fix chip number validation Broadcom's Gen P5 series bpf: Provide better register bounds after jmp32 instructions RDMA/bnxt_re: Fix stat push into dma buffer on gen p5 devices RDMA/bnxt_re: Fix missing le16_to_cpu tools, bpf: Fix build for 'make -s tools/bpf O=<dir>' net: phy: initialise phydev speed and duplex sanely ice: Fix setting coalesce to handle DCB configuration ice: Only disable VF state when freeing each VF resources drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2 mips: fix build when "48 bits virtual memory" is enabled libtraceevent: Fix memory leakage in copy_filter_type crypto: vmx - Avoid weird build failures mac80211: consider QoS Null frames for STA_NULLFUNC_ACKED crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c crypto: sun4i-ss - Fix 64-bit size_t warnings s390/cpumf: Adjust registration of s390 PMU device drivers mt76: fix possible out-of-bound access in mt7615_fill_txs/mt7603_fill_txs net: ethernet: ti: ale: clean ale tbl on init and intf restart ASoC: soc-pcm: check symmetry before hw_params fbtft: Make sure string is NULL terminated iwlwifi: check kasprintf() return value bnxt_en: Improve RX buffer error handling. s390/kasan: support memcpy_real with TRACE_IRQFLAGS s390/crypto: Fix unsigned variable compared with zero perf probe: Fix to show function entry line as probe-able perf session: Fix decompression of PERF_RECORD_COMPRESSED records brcmfmac: remove monitor interface when detaching net-af_xdp: Use correct number of channels from ethtool x86/insn: Add some Intel instructions to the opcode map ASoC: Intel: bytcr_rt5640: Update quirk for Acer Switch 10 SW5-012 2-in-1 firmware_loader: Fix labels with comma for builtin firmware net: phy: avoid matching all-ones clause 45 PHY IDs bnxt_en: Return proper error code for non-existent NVM variable selftests, bpf: Workaround an alu32 sub-register spilling issue selftests, bpf: Fix test_tc_tunnel hanging perf/core: Fix the mlock accounting, again ASoC: wm5100: add missed pm_runtime_disable spi: st-ssc4: add missed pm_runtime_disable ASoC: wm2200: add missed operations in remove and probe failure sched/uclamp: Fix overzealous type replacement btrfs: don't prematurely free work in run_ordered_work() btrfs: don't prematurely free work in end_workqueue_fn() mmc: tmio: Add MMC_CAP_ERASE to allow erase/discard/trim requests crypto: virtio - deal with unsupported input sizes xhci-pci: Allow host runtime PM as default also for Intel Ice Lake xHCI tun: fix data-race in gro_normal_list() spi: tegra20-slink: add missed clk_unprepare regulator: core: Let boot-on regulators be powered off ASoC: wm8904: fix regcache handling iwlwifi: mvm: fix unaligned read of rx_pkt_status bcache: fix deadlock in bcache_allocator tracing/kprobe: Check whether the non-suffixed symbol is notrace MIPS: ralink: enable PCI support only if driver for mt7621 SoC is selected tracing: use kvcalloc for tgid_map array allocation RDMA/efa: Clear the admin command buffer prior to its submission qtnfmac: fix using skb after free x86/crash: Add a forward declaration of struct kimage qtnfmac: fix invalid channel information output qtnfmac: fix debugfs support for multiple cards cpufreq: Register drivers only after CPU devices have been registered bcache: fix static checker warning in bcache_device_free() parport: load lowlevel driver if ports not found nvme: Discard workaround for non-conformant devices net: ethernet: ti: Add dependency for TI_DAVINCI_EMAC s390/disassembler: don't hide instruction addresses r8169: respect EEE user setting when restarting network net: dsa: sja1105: Disallow management xmit during switch reset ASoC: Intel: kbl_rt5663_rt5514_max98927: Add dmic format constraint bpf, testing: Workaround a verifier failure for test_progs iio: dac: ad5446: Add support for new AD5600 DAC ASoC: rt5677: Mark reg RT5677_PWR_ANLG2 as volatile spi: pxa2xx: Add missed security checks media: vim2m: media_device_cleanup was called too early media: vicodec: media_device_cleanup was called too early EDAC/ghes: Fix grain calculation iio: cros_ec_baro: set info_mask_shared_by_all_available field media: v4l2-ctrl: Lock main_hdl on operations of requests_queued. media: cedrus: Use helpers to access capture queue media: si470x-i2c: add missed operations in remove ice: delay less crypto: atmel - Fix authenc support when it is set to m soundwire: intel: fix PDI/stream mapping for Bulk media: pvrusb2: Fix oops on tear-down when radio support is not present selftests: net: Fix printf format warnings on arm fsi: core: Fix small accesses and unaligned offsets via sysfs ath10k: fix get invalid tx rate for Mesh metric media: exynos4-is: fix wrong mdev and v4l2 dev order in error path drm/amdgpu: Avoid accidental thread reactivation. selftests: proc: Make va_max 1MB cgroup: freezer: don't change task and cgroups status unnecessarily s390/bpf: Use kvcalloc for addrs array libbpf: Fix negative FD close() in xsk_setup_xdp_prog() perf probe: Filter out instances except for inlined subroutine and subprogram perf probe: Skip end-of-sequence and non statement lines perf probe: Fix to show calling lines of inlined functions perf probe: Return a better scope DIE if there is no best scope net: avoid potential false sharing in neighbor related code perf probe: Skip overlapped location on searching variables perf parse: If pmu configuration fails free terms xen/gntdev: Use select for DMA_SHARED_BUFFER ice: Check for null pointer dereference when setting rings drm/amdgpu: fix potential double drop fence reference drm/amd/powerplay: fix struct init in renoir_print_clk_levels drm/amdgpu: disallow direct upload save restore list from gfx driver perf tools: Splice events onto evlist even on error perf tools: Fix cross compile for ARM64 perf probe: Fix to probe a function which has no entry pc libsubcmd: Use -O0 with DEBUG=1 perf probe: Fix to show inlined function callsite without entry_pc perf probe: Fix to show ranges of variables in functions without entry_pc perf probe: Fix to probe an inline function which has no entry pc perf probe: Walk function lines in lexical blocks perf jevents: Fix resource leak in process_mapfile() and main() perf probe: Fix to list probe event with correct line number perf cs-etm: Fix definition of macro TO_CS_QUEUE_NR perf probe: Fix to find range-only function instance rtlwifi: fix memory leak in rtl92c_set_fw_rsvdpagepkt() drm: msm: a6xx: fix debug bus register configuration RDMA/core: Fix return code when modify_port isn't supported ALSA: timer: Limit max amount of slave instances spi: img-spfi: fix potential double release bnx2x: Fix PF-VF communication over multi-cos queues. spi: dw: Fix Designware SPI loopback media: vivid: media_device_cleanup was called too early ASoC: SOF: topology: set trigger order for FE DAI link nvmem: core: fix nvmem_cell_write inline function nvmem: imx-ocotp: reset error status on probe media: staging/imx: Use a shorter name for driver nvme: introduce "Command Aborted By host" status code media: v4l2-core: fix touch support in v4l_g_fmt media: rcar_drif: fix a memory disclosure cpufreq: sun50i: Fix CPU speed bin detection ixgbe: protect TX timestamping from API misuse pinctrl: amd: fix __iomem annotation in amd_gpio_irq_handler() pinctrl: qcom: sc7180: Add missing tile info in SDC_QDSD_PINGROUP/UFS_RESET ASoC: SOF: imx: fix reverse CONFIG_SND_SOC_SOF_OF dependency spi: sifive: disable clk when probe fails and remove ALSA: pcm: Fix missing check of the new non-cached buffer type Bluetooth: Fix advertising duplicated flags libbpf: Fix error handling in bpf_map__reuse_fd() iio: dln2-adc: fix iio_triggered_buffer_postenable() position ALSA: bebob: expand sleep just after breaking connections for protocol version 1 pinctrl: sh-pfc: sh7734: Fix duplicate TCLK1_B net/mlx5e: Verify that rule has at least one fwd/drop action loop: fix no-unmap write-zeroes request behavior libata: Ensure ata_port probe has completed before detach net: hns3: add struct netdev_queue debug info for TX timeout s390/mm: add mm_pxd_folded() checks to pxd_free() s390: add error handling to perf_callchain_kernel s390/time: ensure get_clock_monotonic() returns monotonic values phy: qcom-usb-hs: Fix extcon double register after power cycle phy: renesas: phy-rcar-gen2: Fix the array off by one warning net: dsa: LAN9303: select REGMAP when LAN9303 enable gpu: host1x: Allocate gather copy for host1x staging: wilc1000: check if device is initialzied before changing vif RDMA/core: Set DMA parameters correctly RDMA/qedr: Fix srqs xarray initialization RDMA/hns: Fix memory leak on 'context' on error return path RDMA/qedr: Fix memory leak in user qp and mr ACPI: button: Add DMI quirk for Medion Akoya E2215T spi: sprd: adi: Add missing lock protection when rebooting ubsan, x86: Annotate and allow __ubsan_handle_shift_out_of_bounds() in uaccess regions regulator: core: Release coupled_rdevs on regulator_init_coupling() error drm/tegra: sor: Use correct SOR index on Tegra210 net: phy: dp83867: enable robust auto-mdix i40e: Wrong 'Advertised FEC modes' after set FEC to AUTO drm/amd/display: correctly populate dpp refclk in fpga i40e: initialize ITRN registers with correct values drm/amd/display: setting the DIG_MODE to the correct value. arm64: psci: Reduce the waiting time for cpu_psci_cpu_kill() EDAC/amd64: Set grain per DIMM drm: Don't free jobs in wait_event_interruptible() md/bitmap: avoid race window between md_bitmap_resize and bitmap_file_clear_bit staging: wilc1000: potential corruption in wilc_parse_join_bss_param() md: no longer compare spare disk superblock events in super_load media: smiapp: Register sensor after enabling runtime PM on the device media: aspeed: clear garbage interrupts media: imx7-mipi-csis: Add a check for devm_regulator_get media: st-mipid02: add a check for devm_gpiod_get_optional media: ov5640: Make 2592x1944 mode only available at 15 fps media: ad5820: Define entity function media: ov6650: Fix stored frame interval not in sync with hardware drm/nouveau: Don't grab runtime PM refs for HPD IRQs media: aspeed: set hsync and vsync polarities to normal before starting mode detection media: cedrus: Fix undefined shift with a SHIFT_AND_MASK_BITS macro x86/ioapic: Prevent inconsistent state when moving an interrupt ipmi: Don't allow device module unload when in use RDMA/siw: Fix SQ/RQ drain logic rtl8xxxu: fix RTL8723BU connection failure issue after warm reboot ASoC: soc-pcm: fixup dpcm_prune_paths() loop continue drm/gma500: fix memory disclosures due to uninitialized bytes RDMA/hns: Fix wrong parameters when initial mtt of srq->idx_que net: hns3: log and clear hardware error after reset complete selftests/bpf: Make a copy of subtest name perf tests: Disable bp_signal testing for arm64 power: supply: cpcap-battery: Check voltage before orderly_poweroff staging: iio: ad9834: add a check for devm_clk_get drm/amdgpu: fix amdgpu trace event print string format error drm/amd/display: fix header for RN clk mgr drm/amd/display: enable hostvm based on roimmu active for dcn2.1 x86/mce: Lower throttling MCE messages' priority to warning bpf/stackmap: Fix deadlock with rq_lock in bpf_get_stack() Bluetooth: hci_core: fix init for HCI_USER_CHANNEL Bluetooth: Workaround directed advertising bug in Broadcom controllers Bluetooth: missed cpu_to_le16 conversion in hci_init4_req Bluetooth: btusb: avoid unused function warning iio: adc: max1027: Reset the device at probe time drm/amd/powerplay: avoid disabling ECC if RAS is enabled for VEGA20 usb: usbfs: Suppress problematic bind and unbind uevents. perf vendor events arm64: Fix Hisi hip08 DDRC PMU eventname perf test: Avoid infinite loop for task exit case perf report: Add warning when libunwind not compiled in perf test: Report failure for mmap events drm/bridge: dw-hdmi: Restore audio when setting a mode rtw88: coex: Set 4 slot mode for A2DP ath10k: Correct error handling of dma_map_single() x86/mm: Use the correct function type for native_set_fixmap() drm/amd/display: Program DWB watermarks from correct state extcon: sm5502: Reset registers during initialization drm/amd/display: Fix dongle_caps containing stale information. syscalls/x86: Use the correct function type in SYSCALL_DEFINE0 drm/amd/display: add new active dongle to existent w/a media: ti-vpe: vpe: fix a v4l2-compliance failure about invalid sizeimage drm/amd/display: wait for set pipe mcp command completion drm/amd/display: Properly round nominal frequency for SPD media: ti-vpe: vpe: ensure buffers are cleaned up properly in abort cases media: ti-vpe: vpe: fix a v4l2-compliance failure causing a kernel panic media: ti-vpe: vpe: Make sure YUYV is set as default format media: ti-vpe: vpe: fix a v4l2-compliance failure about frame sequence number media: ti-vpe: vpe: fix a v4l2-compliance warning about invalid pixel format media: ti-vpe: vpe: Fix Motion Vector vpdma stride ASoC: SOF: enable sync_write in hdac_bus misc: fastrpc: fix memory leak from miscdev->name crypto: aegis128/simd - build 32-bit ARM for v8 architecture explicitly crypto: inside-secure - Fix a maybe-uninitialized warning media: cx88: Fix some error handling path in 'cx8800_initdev()' team: call RCU read lock when walking the port_list net/smc: increase device refcount for added link group libbpf: Fix passing uninitialized bytes to setsockopt libbpf: Fix struct end padding in btf_dump selftests/bpf: Fix btf_dump padding test case drm/drm_vblank: Change EINVAL by the correct errno mwifiex: pcie: Fix memory leak in mwifiex_pcie_init_evt_ring MIPS: futex: Emit Loongson3 sync workarounds within asm drm/amdkfd: Fix MQD size calculation block: Fix writeback throttling W=1 compiler warnings samples: pktgen: fix proc_cmd command result check logic drm/bridge: dw-hdmi: Refuse DDC/CI transfers on the internal I2C controller media: meson/ao-cec: move cec_notifier_cec_adap_register after hw setup media: cec-funcs.h: add status_req checks media: flexcop-usb: fix NULL-ptr deref in flexcop_usb_transfer_init() tools/memory-model: Fix data race detection for unordered store and load regulator: max8907: Fix the usage of uninitialized variable in max8907_regulator_probe() hwrng: omap3-rom - Call clk_disable_unprepare() on exit only if not idled crypto: aegis128-neon - use Clang compatible cflags for ARM usb: renesas_usbhs: add suspend event support in gadget mode drm/amd/display: fix struct init in update_bounding_box rtw88: fix NSS of hw_cap media: venus: Fix occasionally failures to suspend drm/amd/display: set minimum abm backlight level selftests/bpf: Correct path to include msg + path drm/amd/powerplay: A workaround to GPU RESET on APU x86/math-emu: Check __copy_from_user() result drm/amdkfd: fix a potential NULL pointer dereference (v2) drm/sun4i: dsi: Fix TCON DRQ set bits pinctrl: devicetree: Avoid taking direct reference to device name string drm/amd/display: Set number of pipes to 1 if the second pipe was disabled media: vimc: Fix gpf in rmmod path when stream is active ath10k: fix offchannel tx failure when no ath10k_mac_tx_frm_has_freq media: venus: core: Fix msm8996 frequency table tools/power/cpupower: Fix initializer override in hsw_ext_cstates media: ov6650: Fix stored crop rectangle not in sync with hardware media: ov6650: Fix stored frame format not in sync with hardware media: i2c: ov2659: Fix missing 720p register config media: ov6650: Fix crop rectangle alignment not passed back media: i2c: ov2659: fix s_stream return value media: ov6650: Fix control handler not freed on init error media: max2175: Fix build error without CONFIG_REGMAP_I2C media: vim2m: Fix BUG_ON in vim2m_device_release() media: vim2m: Fix abort issue media: seco-cec: Add a missing 'release_region()' in an error handling path media: cedrus: fill in bus_info for media device media: am437x-vpfe: Setting STD to current value is not an error spi: gpio: prevent memory leak in spi_gpio_probe drm/komeda: Workaround for broken FLIP_COMPLETE timestamps IB/iser: bound protection_sg size by data_sg size ath10k: fix backtrace on coredump Revert "pinctrl: sh-pfc: r8a77990: Fix MOD_SEL1 bit31 when using SIM0_D" Revert "pinctrl: sh-pfc: r8a77990: Fix MOD_SEL1 bit30 when using SSI_SCK2 and SSI_WS2" libertas: fix a potential NULL pointer dereference rtlwifi: prevent memory leak in rtl_usb_probe staging: rtl8188eu: fix possible null dereference staging: rtl8192u: fix multiple memory leaks on error path drm/meson: vclk: use the correct G12A frac max value spi: Add call to spi_slave_abort() function when spidev driver is released ath10k: Check if station exists before forwarding tx airtime report drm/amd/display: Handle virtual signal type in disable_link() ath10k: add cleanup in ath10k_sta_state() drm/amd/display: Rebuild mapped resources after pipe split drm/ttm: return -EBUSY on pipelining with no_gpu_wait (v2) drm/amdgpu: grab the id mgr lock while accessing passid_mapping drm/amdgpu/sriov: add ring_stop before ring_create in psp v11 code iio: light: bh1750: Resolve compiler warning and make code more readable iio: max31856: add missing of_node and parent references to iio_dev drm/amd/display: OTC underflow fix drm/bridge: analogix-anx78xx: silence -EPROBE_DEFER warnings drm/amd/display: verify stream link before link test drm: Use EOPNOTSUPP, not ENOTSUPP drm: exynos: exynos_hdmi: use cec_notifier_conn_(un)register drm/panel: Add missing drm_panel_init() in panel drivers drm/mipi-dbi: fix a loop in debugfs code drm: mst: Fix query_payload ack reply struct drm/virtio: switch virtio_gpu_wait_ioctl() to gem helper. drm/vc4/vc4_hdmi: fill in connector info ALSA: hda/ca0132 - Fix work handling in delayed HP detection ALSA: hda/ca0132 - Avoid endless loop ALSA: hda/ca0132 - Keep power on during processing DSP response ALSA: pcm: Avoid possible info leaks from PCM stream buffers Btrfs: fix removal logic of the tree mod log that leads to use-after-free issues btrfs: handle ENOENT in btrfs_uuid_tree_iterate btrfs: do not leak reloc root if we fail to read the fs root btrfs: skip log replay on orphaned roots btrfs: abort transaction after failed inode updates in create_subvol btrfs: send: remove WARN_ON for readonly mount Btrfs: fix missing data checksums after replaying a log tree btrfs: return error pointer from alloc_test_extent_buffer Btrfs: make tree checker detect checksum items with overlapping ranges btrfs: do not call synchronize_srcu() in inode_tree_del btrfs: don't double lock the subvol_sem for rename exchange NFC: nxp-nci: Fix probing without ACPI net: dsa: b53: Fix egress flooding settings net: stmmac: platform: Fix MDIO init for platforms without PHY net: ethernet: ti: davinci_cpdma: fix warning "device driver frees DMA memory with different size" mlxsw: spectrum_router: Remove unlikely user-triggerable warning dpaa2-ptp: fix double free of the ptp_qoriq IRQ net: ena: fix issues in setting interrupt moderation params in ethtool net: ena: fix default tx interrupt moderation interval bonding: fix bond_neigh_init() neighbour: remove neigh_cleanup() method selftests: forwarding: Delete IPv6 address at the end sctp: fully initialize v4 addr in some functions sctp: fix memleak on err handling of stream initialization qede: Fix multicast mac configuration qede: Disable hardware gro when xdp prog is installed nfp: flower: fix stats id allocation net: usb: lan78xx: Fix suspend/resume PHY register access error net-sysfs: Call dev_hold always in rx_queue_add_kobject net: qlogic: Fix error paths in ql_alloc_large_buffers() net: phy: ensure that phy IDs are correctly typed net: nfc: nci: fix a possible sleep-in-atomic-context bug in nci_uart_tty_receive() net: hisilicon: Fix a BUG trigered by wrong bytes_compl net: gemini: Fix memory leak in gmac_setup_txqs net: dst: Force 4-byte alignment of dst_metrics mod_devicetable: fix PHY module format fjes: fix missed check in fjes_acpi_add af_packet: set defaule value for tmo ANDROID: Kconfig.gki: Add Hidden SPRD DRM configs ANDROID: Add a tracepoint for mapping inode to full path Revert "drm/virtio: fix DRM_FORMAT_* handling" ANDROID: gki_defconfig: Disable TRANSPARENT_HUGEPAGE staging: android: ion: Remove unused rbtree for ion_buffer Linux 5.4.6 ALSA: hda: Fix regression by strip mask fix drm/amdgpu: add invalidate semaphore limit for SRIOV and picasso in gmc9 drm/amdgpu: avoid using invalidate semaphore for picasso drm/i915/gvt: Fix cmd length check for MI_ATOMIC drm/amdgpu/gfx10: re-init clear state buffer after gpu reset drm/amdgpu/gfx10: explicitly wait for cp idle after halt/unhalt drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10 drm/amdgpu: initialize vm_inv_eng0_sem for gfxhub and mmhub drm/amd/display: add default clocks if not able to fetch them drm/amd/display: re-enable wait in pipelock, but add timeout drm/dp_mst: Correct the bug in drm_dp_update_payload_part1() drm/radeon: fix r1xx/r2xx register checker for POT textures drm/i915/fbc: Disable fbc by default on all glk+ drm/nouveau/kms/nv50-: Limit MST BPC to 8 drm/nouveau/kms/nv50-: Store the bpc we're using in nv50_head_atom drm/nouveau/kms/nv50-: Call outp_atomic_check_view() before handling PBN scsi: qla2xxx: Fix incorrect SFUB length used for Secure Flash Update MB Cmd scsi: qla2xxx: Correctly retrieve and interpret active flash region scsi: qla2xxx: Change discovery state before PLOGI scsi: qla2xxx: Added support for MPI and PEP regions for ISP28XX scsi: qla2xxx: Initialize free_work before flushing it scsi: qla2xxx: Ignore NULL pointer in tcm_qla2xxx_free_mcmd scsi: iscsi: Fix a potential deadlock in the timeout handler scsi: ufs: Disable autohibern8 feature in Cadence UFS dm thin: Flush data device before committing metadata dm thin metadata: Add support for a pre-commit callback dm clone: Flush destination device before committing metadata dm clone metadata: Use a two phase commit dm clone metadata: Track exact changes per transaction dm btree: increase rebalance threshold in __rebalance2() dm mpath: remove harmful bio-based optimization drm: meson: venc: cvbs: fix CVBS mode matching drm/mgag200: Flag all G200 SE A machines as broken wrt <startadd> drm/mgag200: Add workaround for HW that does not support 'startadd' drm/mgag200: Store flags from PCI driver data in device structure drm/mgag200: Extract device type from flags drm/panfrost: Fix a race in panfrost_gem_free_object() drm/panfrost: Fix a BO leak in panfrost_ioctl_mmap_bo() drm/panfrost: Fix a race in panfrost_ioctl_madvise() dma-buf: Fix memory leak in sync_file_merge() vfio/pci: call irq_bypass_unregister_producer() before freeing irq ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume() ARM: dts: s3c64xx: Fix init order of clock providers cifs: Fix retrieval of DFS referrals in cifs_mount() CIFS: Fix NULL pointer dereference in mid callback CIFS: Do not miss cancelled OPEN responses CIFS: Close open handle after interrupted close CIFS: Respect O_SYNC and O_DIRECT flags during reconnect cifs: Don't display RDMA transport on reconnect cifs: smbd: Return -ECONNABORTED when trasnport is not in connected state cifs: smbd: Return -EINVAL when the number of iovs exceeds SMBDIRECT_MAX_SGE cifs: smbd: Add messages on RDMA session destroy and reconnection cifs: smbd: Only queue work for error recovery on memory registration cifs: smbd: Return -EAGAIN when transport is reconnecting rpmsg: glink: Free pending deferred work on remove rpmsg: glink: Don't send pending rx_done during remove rpmsg: glink: Fix rpmsg_register_device err handling rpmsg: glink: Put an extra reference during cleanup rpmsg: glink: Fix use after free in open_ack TIMEOUT case rpmsg: glink: Fix reuse intents memory leak issue rpmsg: glink: Set tail pointer to 0 at end of FIFO xtensa: fix syscall_set_return_value xtensa: fix TLB sanity checker gfs2: fix glock reference problem in gfs2_trans_remove_revoke gfs2: Multi-block allocations in gfs2_page_mkwrite xtensa: use MEMBLOCK_ALLOC_ANYWHERE for KASAN shadow map block: fix "check bi_size overflow before merge" PM / QoS: Redefine FREQ_QOS_MAX_DEFAULT_VALUE to S32_MAX PCI: Apply Cavium ACS quirk to ThunderX2 and ThunderX3 PCI: rcar: Fix missing MACCTLR register setting in initialization sequence PCI: Do not use bus number zero from EA capability PCI/MSI: Fix incorrect MSI-X masking on resume PCI: Fix Intel ACS quirk UPDCR register address PCI: pciehp: Avoid returning prematurely from sysfs requests PCI/PM: Always return devices to D0 when thawing PCI/switchtec: Read all 64 bits of part_event_bitmap mmc: core: Re-work HW reset for SDIO cards mmc: core: Drop check for mmc_card_is_removable() in mmc_rescan() mmc: block: Add CMD13 polling for MMC IOCTLS with R1B response mmc: block: Make card_busy_detect() a bit more generic USB: Fix incorrect DMA allocations for local memory pool drivers ANDROID: update ABI for db845c changes BACKPORT: iommu: arm-smmu-impl: Add sdm845 implementation hook UPSTREAM: firmware/qcom_scm: Add scm call to handle smmu errata UPSTREAM: firmware: qcom_scm-64: Add atomic version of qcom_scm_call UPSTREAM: cpufreq: qcom-hw: Move driver initialization earlier UPSTREAM: cpufreq: Initialize cpufreq-dt driver earlier UPSTREAM: cpufreq: Initialize the governors in core_initcall ANDROID: tty: serial_core: Export uart_console_device so it can be used by modules ANDROID: gki_defconfig: Add qcom pcie options to gki_defconfig ANDROID: Kconfig.gki: Add entries for qcom clk drivers ANDROID: Kconfig.gki: Add PINCTRL_MSM to QCOM Hidden configs ANDROID: Kconfig.gki: Add hidden CONFIG_WANT_DEV_COREDUMP for DRM_MSM driver ANDROID: PCI: qcom: Add support for SDM845 PCIe controller ANDROID: PCI: qcom: Fix the fixup of PCI_VENDOR_ID_QCOM ANDROID: phy: qcom: qmp: Add SDM845 QHP PCIe PHY ANDROID: phy: qcom: qmp: Add SDM845 PCIe QMP PHY support ANDROID: phy: qcom: qmp: Use power_on/off ops for PCIe ANDROID: phy: qcom-qmp: Increase PHY ready timeout ANDROID: gki_defconfig: Enable CONFIG_GNSS_CMDLINE_SERIAL ANDROID: gnss: Add command line test driver ANDROID: serdev: add platform device support ANDROID: usb: gadget: Add configfs attribuite for controling match_existing_only ANDROID: gki_defconfig: enable ARM64_SW_TTBR0_PAN ANDROID: gki_defconfig: Set BINFMT_MISC as =m FROMLIST: ARM: Remove arm_pm_restart() FROMLIST: ARM64: Remove arm_pm_restart() FROMLIST: ARM: Register with kernel restart handler FROMLIST: drivers: firmware: psci: Register with kernel restart handler FROMLIST: ARM: xen: Register with kernel restart handler FROMLIST: ARM: prima2: Register with kernel restart handler ANDROID: ASoC: add hikey960-i2s DT bindings ANDROID: sound: Add hikey960 i2s audio driver ANDROID: HACK: adv7511: Add poweron delay to allow for EDID probing to work ANDROID: drm: kirin: Fix Makefile to correct for module builds ANDROID: drm: kirin960: Remove one mode-line that seems to be causing trouble ANDROID: drm: kirin: remove wait for VACTIVE IRQ ANDROID: drm: kirin: Add kirin960 dpe driver support ANDROID: drm: kirin: Introduce kirin960 ANDROID: arm64: dts: hi3660: Add support for usb on Hikey960 ANDROID: arm64: dts: hikey960: Fix bootwarning on mapping reboot reason syscon ANDROID: arm64: dts: hi3660: adb reboot node ANDROID: arm64: dts: hi3660: enable gpu ANDROID: arm64: dts: hi3660-hikey960: Add i2s & sound device ANDROID: arm64: dts: hi3660: add display driver dts ANDROID: arm64: dts: hikey960: Add CMA entry for ION/framebuffers ANDROID: mm/memory.c: export mm_trace_rss_stat ANDROID: update ABI for 5.4.5 Conflicts: Documentation/devicetree/bindings drivers/iommu/Makefile drivers/rpmsg/qcom_glink_native.c drivers/usb/gadget/configfs.c kernel/sched/cpufreq_schedutil.c Change-Id: I70a4b65be7a0c8be589f13d1fd2ce05207a972f0 Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org> |
||
![]() |
861433ef01 |
Merge 5.4.7 into android-5.4
Changes in 5.4.7 af_packet: set defaule value for tmo fjes: fix missed check in fjes_acpi_add mod_devicetable: fix PHY module format net: dst: Force 4-byte alignment of dst_metrics net: gemini: Fix memory leak in gmac_setup_txqs net: hisilicon: Fix a BUG trigered by wrong bytes_compl net: nfc: nci: fix a possible sleep-in-atomic-context bug in nci_uart_tty_receive() net: phy: ensure that phy IDs are correctly typed net: qlogic: Fix error paths in ql_alloc_large_buffers() net-sysfs: Call dev_hold always in rx_queue_add_kobject net: usb: lan78xx: Fix suspend/resume PHY register access error nfp: flower: fix stats id allocation qede: Disable hardware gro when xdp prog is installed qede: Fix multicast mac configuration sctp: fix memleak on err handling of stream initialization sctp: fully initialize v4 addr in some functions selftests: forwarding: Delete IPv6 address at the end neighbour: remove neigh_cleanup() method bonding: fix bond_neigh_init() net: ena: fix default tx interrupt moderation interval net: ena: fix issues in setting interrupt moderation params in ethtool dpaa2-ptp: fix double free of the ptp_qoriq IRQ mlxsw: spectrum_router: Remove unlikely user-triggerable warning net: ethernet: ti: davinci_cpdma: fix warning "device driver frees DMA memory with different size" net: stmmac: platform: Fix MDIO init for platforms without PHY net: dsa: b53: Fix egress flooding settings NFC: nxp-nci: Fix probing without ACPI btrfs: don't double lock the subvol_sem for rename exchange btrfs: do not call synchronize_srcu() in inode_tree_del Btrfs: make tree checker detect checksum items with overlapping ranges btrfs: return error pointer from alloc_test_extent_buffer Btrfs: fix missing data checksums after replaying a log tree btrfs: send: remove WARN_ON for readonly mount btrfs: abort transaction after failed inode updates in create_subvol btrfs: skip log replay on orphaned roots btrfs: do not leak reloc root if we fail to read the fs root btrfs: handle ENOENT in btrfs_uuid_tree_iterate Btrfs: fix removal logic of the tree mod log that leads to use-after-free issues ALSA: pcm: Avoid possible info leaks from PCM stream buffers ALSA: hda/ca0132 - Keep power on during processing DSP response ALSA: hda/ca0132 - Avoid endless loop ALSA: hda/ca0132 - Fix work handling in delayed HP detection drm/vc4/vc4_hdmi: fill in connector info drm/virtio: switch virtio_gpu_wait_ioctl() to gem helper. drm: mst: Fix query_payload ack reply struct drm/mipi-dbi: fix a loop in debugfs code drm/panel: Add missing drm_panel_init() in panel drivers drm: exynos: exynos_hdmi: use cec_notifier_conn_(un)register drm: Use EOPNOTSUPP, not ENOTSUPP drm/amd/display: verify stream link before link test drm/bridge: analogix-anx78xx: silence -EPROBE_DEFER warnings drm/amd/display: OTC underflow fix iio: max31856: add missing of_node and parent references to iio_dev iio: light: bh1750: Resolve compiler warning and make code more readable drm/amdgpu/sriov: add ring_stop before ring_create in psp v11 code drm/amdgpu: grab the id mgr lock while accessing passid_mapping drm/ttm: return -EBUSY on pipelining with no_gpu_wait (v2) drm/amd/display: Rebuild mapped resources after pipe split ath10k: add cleanup in ath10k_sta_state() drm/amd/display: Handle virtual signal type in disable_link() ath10k: Check if station exists before forwarding tx airtime report spi: Add call to spi_slave_abort() function when spidev driver is released drm/meson: vclk: use the correct G12A frac max value staging: rtl8192u: fix multiple memory leaks on error path staging: rtl8188eu: fix possible null dereference rtlwifi: prevent memory leak in rtl_usb_probe libertas: fix a potential NULL pointer dereference Revert "pinctrl: sh-pfc: r8a77990: Fix MOD_SEL1 bit30 when using SSI_SCK2 and SSI_WS2" Revert "pinctrl: sh-pfc: r8a77990: Fix MOD_SEL1 bit31 when using SIM0_D" ath10k: fix backtrace on coredump IB/iser: bound protection_sg size by data_sg size drm/komeda: Workaround for broken FLIP_COMPLETE timestamps spi: gpio: prevent memory leak in spi_gpio_probe media: am437x-vpfe: Setting STD to current value is not an error media: cedrus: fill in bus_info for media device media: seco-cec: Add a missing 'release_region()' in an error handling path media: vim2m: Fix abort issue media: vim2m: Fix BUG_ON in vim2m_device_release() media: max2175: Fix build error without CONFIG_REGMAP_I2C media: ov6650: Fix control handler not freed on init error media: i2c: ov2659: fix s_stream return value media: ov6650: Fix crop rectangle alignment not passed back media: i2c: ov2659: Fix missing 720p register config media: ov6650: Fix stored frame format not in sync with hardware media: ov6650: Fix stored crop rectangle not in sync with hardware tools/power/cpupower: Fix initializer override in hsw_ext_cstates media: venus: core: Fix msm8996 frequency table ath10k: fix offchannel tx failure when no ath10k_mac_tx_frm_has_freq media: vimc: Fix gpf in rmmod path when stream is active drm/amd/display: Set number of pipes to 1 if the second pipe was disabled pinctrl: devicetree: Avoid taking direct reference to device name string drm/sun4i: dsi: Fix TCON DRQ set bits drm/amdkfd: fix a potential NULL pointer dereference (v2) x86/math-emu: Check __copy_from_user() result drm/amd/powerplay: A workaround to GPU RESET on APU selftests/bpf: Correct path to include msg + path drm/amd/display: set minimum abm backlight level media: venus: Fix occasionally failures to suspend rtw88: fix NSS of hw_cap drm/amd/display: fix struct init in update_bounding_box usb: renesas_usbhs: add suspend event support in gadget mode crypto: aegis128-neon - use Clang compatible cflags for ARM hwrng: omap3-rom - Call clk_disable_unprepare() on exit only if not idled regulator: max8907: Fix the usage of uninitialized variable in max8907_regulator_probe() tools/memory-model: Fix data race detection for unordered store and load media: flexcop-usb: fix NULL-ptr deref in flexcop_usb_transfer_init() media: cec-funcs.h: add status_req checks media: meson/ao-cec: move cec_notifier_cec_adap_register after hw setup drm/bridge: dw-hdmi: Refuse DDC/CI transfers on the internal I2C controller samples: pktgen: fix proc_cmd command result check logic block: Fix writeback throttling W=1 compiler warnings drm/amdkfd: Fix MQD size calculation MIPS: futex: Emit Loongson3 sync workarounds within asm mwifiex: pcie: Fix memory leak in mwifiex_pcie_init_evt_ring drm/drm_vblank: Change EINVAL by the correct errno selftests/bpf: Fix btf_dump padding test case libbpf: Fix struct end padding in btf_dump libbpf: Fix passing uninitialized bytes to setsockopt net/smc: increase device refcount for added link group team: call RCU read lock when walking the port_list media: cx88: Fix some error handling path in 'cx8800_initdev()' crypto: inside-secure - Fix a maybe-uninitialized warning crypto: aegis128/simd - build 32-bit ARM for v8 architecture explicitly misc: fastrpc: fix memory leak from miscdev->name ASoC: SOF: enable sync_write in hdac_bus media: ti-vpe: vpe: Fix Motion Vector vpdma stride media: ti-vpe: vpe: fix a v4l2-compliance warning about invalid pixel format media: ti-vpe: vpe: fix a v4l2-compliance failure about frame sequence number media: ti-vpe: vpe: Make sure YUYV is set as default format media: ti-vpe: vpe: fix a v4l2-compliance failure causing a kernel panic media: ti-vpe: vpe: ensure buffers are cleaned up properly in abort cases drm/amd/display: Properly round nominal frequency for SPD drm/amd/display: wait for set pipe mcp command completion media: ti-vpe: vpe: fix a v4l2-compliance failure about invalid sizeimage drm/amd/display: add new active dongle to existent w/a syscalls/x86: Use the correct function type in SYSCALL_DEFINE0 drm/amd/display: Fix dongle_caps containing stale information. extcon: sm5502: Reset registers during initialization drm/amd/display: Program DWB watermarks from correct state x86/mm: Use the correct function type for native_set_fixmap() ath10k: Correct error handling of dma_map_single() rtw88: coex: Set 4 slot mode for A2DP drm/bridge: dw-hdmi: Restore audio when setting a mode perf test: Report failure for mmap events perf report: Add warning when libunwind not compiled in perf test: Avoid infinite loop for task exit case perf vendor events arm64: Fix Hisi hip08 DDRC PMU eventname usb: usbfs: Suppress problematic bind and unbind uevents. drm/amd/powerplay: avoid disabling ECC if RAS is enabled for VEGA20 iio: adc: max1027: Reset the device at probe time Bluetooth: btusb: avoid unused function warning Bluetooth: missed cpu_to_le16 conversion in hci_init4_req Bluetooth: Workaround directed advertising bug in Broadcom controllers Bluetooth: hci_core: fix init for HCI_USER_CHANNEL bpf/stackmap: Fix deadlock with rq_lock in bpf_get_stack() x86/mce: Lower throttling MCE messages' priority to warning drm/amd/display: enable hostvm based on roimmu active for dcn2.1 drm/amd/display: fix header for RN clk mgr drm/amdgpu: fix amdgpu trace event print string format error staging: iio: ad9834: add a check for devm_clk_get power: supply: cpcap-battery: Check voltage before orderly_poweroff perf tests: Disable bp_signal testing for arm64 selftests/bpf: Make a copy of subtest name net: hns3: log and clear hardware error after reset complete RDMA/hns: Fix wrong parameters when initial mtt of srq->idx_que drm/gma500: fix memory disclosures due to uninitialized bytes ASoC: soc-pcm: fixup dpcm_prune_paths() loop continue rtl8xxxu: fix RTL8723BU connection failure issue after warm reboot RDMA/siw: Fix SQ/RQ drain logic ipmi: Don't allow device module unload when in use x86/ioapic: Prevent inconsistent state when moving an interrupt media: cedrus: Fix undefined shift with a SHIFT_AND_MASK_BITS macro media: aspeed: set hsync and vsync polarities to normal before starting mode detection drm/nouveau: Don't grab runtime PM refs for HPD IRQs media: ov6650: Fix stored frame interval not in sync with hardware media: ad5820: Define entity function media: ov5640: Make 2592x1944 mode only available at 15 fps media: st-mipid02: add a check for devm_gpiod_get_optional media: imx7-mipi-csis: Add a check for devm_regulator_get media: aspeed: clear garbage interrupts media: smiapp: Register sensor after enabling runtime PM on the device md: no longer compare spare disk superblock events in super_load staging: wilc1000: potential corruption in wilc_parse_join_bss_param() md/bitmap: avoid race window between md_bitmap_resize and bitmap_file_clear_bit drm: Don't free jobs in wait_event_interruptible() EDAC/amd64: Set grain per DIMM arm64: psci: Reduce the waiting time for cpu_psci_cpu_kill() drm/amd/display: setting the DIG_MODE to the correct value. i40e: initialize ITRN registers with correct values drm/amd/display: correctly populate dpp refclk in fpga i40e: Wrong 'Advertised FEC modes' after set FEC to AUTO net: phy: dp83867: enable robust auto-mdix drm/tegra: sor: Use correct SOR index on Tegra210 regulator: core: Release coupled_rdevs on regulator_init_coupling() error ubsan, x86: Annotate and allow __ubsan_handle_shift_out_of_bounds() in uaccess regions spi: sprd: adi: Add missing lock protection when rebooting ACPI: button: Add DMI quirk for Medion Akoya E2215T RDMA/qedr: Fix memory leak in user qp and mr RDMA/hns: Fix memory leak on 'context' on error return path RDMA/qedr: Fix srqs xarray initialization RDMA/core: Set DMA parameters correctly staging: wilc1000: check if device is initialzied before changing vif gpu: host1x: Allocate gather copy for host1x net: dsa: LAN9303: select REGMAP when LAN9303 enable phy: renesas: phy-rcar-gen2: Fix the array off by one warning phy: qcom-usb-hs: Fix extcon double register after power cycle s390/time: ensure get_clock_monotonic() returns monotonic values s390: add error handling to perf_callchain_kernel s390/mm: add mm_pxd_folded() checks to pxd_free() net: hns3: add struct netdev_queue debug info for TX timeout libata: Ensure ata_port probe has completed before detach loop: fix no-unmap write-zeroes request behavior net/mlx5e: Verify that rule has at least one fwd/drop action pinctrl: sh-pfc: sh7734: Fix duplicate TCLK1_B ALSA: bebob: expand sleep just after breaking connections for protocol version 1 iio: dln2-adc: fix iio_triggered_buffer_postenable() position libbpf: Fix error handling in bpf_map__reuse_fd() Bluetooth: Fix advertising duplicated flags ALSA: pcm: Fix missing check of the new non-cached buffer type spi: sifive: disable clk when probe fails and remove ASoC: SOF: imx: fix reverse CONFIG_SND_SOC_SOF_OF dependency pinctrl: qcom: sc7180: Add missing tile info in SDC_QDSD_PINGROUP/UFS_RESET pinctrl: amd: fix __iomem annotation in amd_gpio_irq_handler() ixgbe: protect TX timestamping from API misuse cpufreq: sun50i: Fix CPU speed bin detection media: rcar_drif: fix a memory disclosure media: v4l2-core: fix touch support in v4l_g_fmt nvme: introduce "Command Aborted By host" status code media: staging/imx: Use a shorter name for driver nvmem: imx-ocotp: reset error status on probe nvmem: core: fix nvmem_cell_write inline function ASoC: SOF: topology: set trigger order for FE DAI link media: vivid: media_device_cleanup was called too early spi: dw: Fix Designware SPI loopback bnx2x: Fix PF-VF communication over multi-cos queues. spi: img-spfi: fix potential double release ALSA: timer: Limit max amount of slave instances RDMA/core: Fix return code when modify_port isn't supported drm: msm: a6xx: fix debug bus register configuration rtlwifi: fix memory leak in rtl92c_set_fw_rsvdpagepkt() perf probe: Fix to find range-only function instance perf cs-etm: Fix definition of macro TO_CS_QUEUE_NR perf probe: Fix to list probe event with correct line number perf jevents: Fix resource leak in process_mapfile() and main() perf probe: Walk function lines in lexical blocks perf probe: Fix to probe an inline function which has no entry pc perf probe: Fix to show ranges of variables in functions without entry_pc perf probe: Fix to show inlined function callsite without entry_pc libsubcmd: Use -O0 with DEBUG=1 perf probe: Fix to probe a function which has no entry pc perf tools: Fix cross compile for ARM64 perf tools: Splice events onto evlist even on error drm/amdgpu: disallow direct upload save restore list from gfx driver drm/amd/powerplay: fix struct init in renoir_print_clk_levels drm/amdgpu: fix potential double drop fence reference ice: Check for null pointer dereference when setting rings xen/gntdev: Use select for DMA_SHARED_BUFFER perf parse: If pmu configuration fails free terms perf probe: Skip overlapped location on searching variables net: avoid potential false sharing in neighbor related code perf probe: Return a better scope DIE if there is no best scope perf probe: Fix to show calling lines of inlined functions perf probe: Skip end-of-sequence and non statement lines perf probe: Filter out instances except for inlined subroutine and subprogram libbpf: Fix negative FD close() in xsk_setup_xdp_prog() s390/bpf: Use kvcalloc for addrs array cgroup: freezer: don't change task and cgroups status unnecessarily selftests: proc: Make va_max 1MB drm/amdgpu: Avoid accidental thread reactivation. media: exynos4-is: fix wrong mdev and v4l2 dev order in error path ath10k: fix get invalid tx rate for Mesh metric fsi: core: Fix small accesses and unaligned offsets via sysfs selftests: net: Fix printf format warnings on arm media: pvrusb2: Fix oops on tear-down when radio support is not present soundwire: intel: fix PDI/stream mapping for Bulk crypto: atmel - Fix authenc support when it is set to m ice: delay less media: si470x-i2c: add missed operations in remove media: cedrus: Use helpers to access capture queue media: v4l2-ctrl: Lock main_hdl on operations of requests_queued. iio: cros_ec_baro: set info_mask_shared_by_all_available field EDAC/ghes: Fix grain calculation media: vicodec: media_device_cleanup was called too early media: vim2m: media_device_cleanup was called too early spi: pxa2xx: Add missed security checks ASoC: rt5677: Mark reg RT5677_PWR_ANLG2 as volatile iio: dac: ad5446: Add support for new AD5600 DAC bpf, testing: Workaround a verifier failure for test_progs ASoC: Intel: kbl_rt5663_rt5514_max98927: Add dmic format constraint net: dsa: sja1105: Disallow management xmit during switch reset r8169: respect EEE user setting when restarting network s390/disassembler: don't hide instruction addresses net: ethernet: ti: Add dependency for TI_DAVINCI_EMAC nvme: Discard workaround for non-conformant devices parport: load lowlevel driver if ports not found bcache: fix static checker warning in bcache_device_free() cpufreq: Register drivers only after CPU devices have been registered qtnfmac: fix debugfs support for multiple cards qtnfmac: fix invalid channel information output x86/crash: Add a forward declaration of struct kimage qtnfmac: fix using skb after free RDMA/efa: Clear the admin command buffer prior to its submission tracing: use kvcalloc for tgid_map array allocation MIPS: ralink: enable PCI support only if driver for mt7621 SoC is selected tracing/kprobe: Check whether the non-suffixed symbol is notrace bcache: fix deadlock in bcache_allocator iwlwifi: mvm: fix unaligned read of rx_pkt_status ASoC: wm8904: fix regcache handling regulator: core: Let boot-on regulators be powered off spi: tegra20-slink: add missed clk_unprepare tun: fix data-race in gro_normal_list() xhci-pci: Allow host runtime PM as default also for Intel Ice Lake xHCI crypto: virtio - deal with unsupported input sizes mmc: tmio: Add MMC_CAP_ERASE to allow erase/discard/trim requests btrfs: don't prematurely free work in end_workqueue_fn() btrfs: don't prematurely free work in run_ordered_work() sched/uclamp: Fix overzealous type replacement ASoC: wm2200: add missed operations in remove and probe failure spi: st-ssc4: add missed pm_runtime_disable ASoC: wm5100: add missed pm_runtime_disable perf/core: Fix the mlock accounting, again selftests, bpf: Fix test_tc_tunnel hanging selftests, bpf: Workaround an alu32 sub-register spilling issue bnxt_en: Return proper error code for non-existent NVM variable net: phy: avoid matching all-ones clause 45 PHY IDs firmware_loader: Fix labels with comma for builtin firmware ASoC: Intel: bytcr_rt5640: Update quirk for Acer Switch 10 SW5-012 2-in-1 x86/insn: Add some Intel instructions to the opcode map net-af_xdp: Use correct number of channels from ethtool brcmfmac: remove monitor interface when detaching perf session: Fix decompression of PERF_RECORD_COMPRESSED records perf probe: Fix to show function entry line as probe-able s390/crypto: Fix unsigned variable compared with zero s390/kasan: support memcpy_real with TRACE_IRQFLAGS bnxt_en: Improve RX buffer error handling. iwlwifi: check kasprintf() return value fbtft: Make sure string is NULL terminated ASoC: soc-pcm: check symmetry before hw_params net: ethernet: ti: ale: clean ale tbl on init and intf restart mt76: fix possible out-of-bound access in mt7615_fill_txs/mt7603_fill_txs s390/cpumf: Adjust registration of s390 PMU device drivers crypto: sun4i-ss - Fix 64-bit size_t warnings crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c mac80211: consider QoS Null frames for STA_NULLFUNC_ACKED crypto: vmx - Avoid weird build failures libtraceevent: Fix memory leakage in copy_filter_type mips: fix build when "48 bits virtual memory" is enabled drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2 ice: Only disable VF state when freeing each VF resources ice: Fix setting coalesce to handle DCB configuration net: phy: initialise phydev speed and duplex sanely tools, bpf: Fix build for 'make -s tools/bpf O=<dir>' RDMA/bnxt_re: Fix missing le16_to_cpu RDMA/bnxt_re: Fix stat push into dma buffer on gen p5 devices bpf: Provide better register bounds after jmp32 instructions RDMA/bnxt_re: Fix chip number validation Broadcom's Gen P5 series ibmvnic: Fix completion structure initialization net: wireless: intel: iwlwifi: fix GRO_NORMAL packet stalling MIPS: futex: Restore \n after sync instructions btrfs: don't prematurely free work in reada_start_machine_worker() btrfs: don't prematurely free work in scrub_missing_raid56_worker() Revert "mmc: sdhci: Fix incorrect switch to HS mode" mmc: mediatek: fix CMD_TA to 2 for MT8173 HS200/HS400 mode tpm_tis: reserve chip for duration of tpm_tis_core_init tpm: fix invalid locking in NONBLOCKING mode iommu: fix KASAN use-after-free in iommu_insert_resv_region iommu: set group default domain before creating direct mappings iommu/vt-d: Fix dmar pte read access not set error iommu/vt-d: Set ISA bridge reserved region as relaxable iommu/vt-d: Allocate reserved region for ISA with correct permission can: xilinx_can: Fix missing Rx can packets on CANFD2.0 can: m_can: tcan4x5x: add required delay after reset can: j1939: j1939_sk_bind(): take priv after lock is held can: flexcan: fix possible deadlock and out-of-order reception after wakeup can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment can: kvaser_usb: kvaser_usb_leaf: Fix some info-leaks to USB devices selftests: net: tls: remove recv_rcvbuf test spi: dw: Correct handling of native chipselect spi: cadence: Correct handling of native chipselect usb: xhci: Fix build warning seen with CONFIG_PM=n drm/amdgpu: fix uninitialized variable pasid_mapping_needed ath10k: Revert "ath10k: add cleanup in ath10k_sta_state()" RDMA/siw: Fix post_recv QP state locking md: avoid invalid memory access for array sb->dev_roles s390/ftrace: fix endless recursion in function_graph tracer ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangs can: flexcan: add low power enter/exit acknowledgment helper usbip: Fix receive error in vhci-hcd when using scatter-gather usbip: Fix error path of vhci_recv_ret_submit() spi: fsl: don't map irq during probe spi: fsl: use platform_get_irq() instead of of_irq_to_resource() efi/memreserve: Register reservations as 'reserved' in /proc/iomem cpufreq: Avoid leaving stale IRQ work items during CPU offline KEYS: asymmetric: return ENOMEM if akcipher_request_alloc() fails mm: vmscan: protect shrinker idr replace with CONFIG_MEMCG USB: EHCI: Do not return -EPIPE when hub is disconnected intel_th: pci: Add Comet Lake PCH-V support intel_th: pci: Add Elkhart Lake SOC support intel_th: Fix freeing IRQs intel_th: msu: Fix window switching without windows platform/x86: hp-wmi: Make buffer for HPWMI_FEATURE2_QUERY 128 bytes staging: comedi: gsc_hpdi: check dma_alloc_coherent() return value tty/serial: atmel: fix out of range clock divider handling serial: sprd: Add clearing break interrupt operation pinctrl: baytrail: Really serialize all register accesses clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_table clk: imx: clk-composite-8m: add lock to gate/mux clk: imx: pll14xx: fix clk_pll14xx_wait_lock ext4: fix ext4_empty_dir() for directories with holes ext4: check for directory entries too close to block end ext4: unlock on error in ext4_expand_extra_isize() ext4: validate the debug_want_extra_isize mount option at parse time iocost: over-budget forced IOs should schedule async delay KVM: PPC: Book3S HV: Fix regression on big endian hosts kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD kvm: x86: Host feature SSBD doesn't imply guest feature AMD_SSBD KVM: arm/arm64: Properly handle faulting of device mappings KVM: arm64: Ensure 'params' is initialised when looking up sys register x86/intel: Disable HPET on Intel Coffee Lake H platforms x86/MCE/AMD: Do not use rdmsr_safe_on_cpu() in smca_configure() x86/MCE/AMD: Allow Reserved types to be overwritten in smca_banks[] x86/mce: Fix possibly incorrect severity calculation on AMD powerpc/vcpu: Assume dedicated processors as non-preempt powerpc/irq: fix stack overflow verification ocxl: Fix concurrent AFU open and device removal mmc: sdhci-msm: Correct the offset and value for DDR_CONFIG register mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add erratum A-009204 support" mmc: sdhci: Update the tuning failed messages to pr_debug level mmc: sdhci-of-esdhc: fix P2020 errata handling mmc: sdhci: Workaround broken command queuing on Intel GLK mmc: sdhci: Add a quirk for broken command queuing nbd: fix shutdown and recv work deadlock v2 iwlwifi: pcie: move power gating workaround earlier in the flow Linux 5.4.7 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I3585238149235bf73bb453e25861d9a6b9193dfa |
||
![]() |
1868166948 |
mod_devicetable: fix PHY module format
[ Upstream commit |
||
![]() |
e689af8a2e |
mhi: add snapshot for MHI driver stack
Add snapshot for MHI driver stack from msm-4.19 commit 6cc10bff8d4a ("Bluetooth: Re-initialize regulator to NULL on error"). Additional changes are made to pass check_patch errors. Change-Id: I4dbe727e25d01967dd9cbe60125af47d3bab3f20 Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> |
||
![]() |
375c1eca79 |
slimbus: Add snapshot of slimbus driver
This snapshot is taken as of msm-4.19 'commit <f08e34e48e72> (Merge "defconfig: enable dcvs configs for bengal target")'. Change-Id: I2f187a74814b1b04fa447a5664c5b170d075ffa4 Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org> |
||
![]() |
3cf5c71422 |
ANDROID: ALSA: jack: Update supported jack switch types
Change adds support for jack switch types supported by platform. This change also squashes the below changes- include: increase allowed SW INPUT device ID from 15 to 32 Increase the Input device SW ID from 15 to 32. This is needed to accommodate more input devices. Bug: 142489397 Change-Id: If77f8b37b4db72ada2b5d8a3095265eef90ab62b Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org> Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org> Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org> Signed-off-by: Meng Wang <mwang@codeaurora.org> |
||
![]() |
8732d85a69 |
platform/x86: wmi: add missing struct parameter description
Add a description for the context parameter in the struct wmi_device_id.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes:
|
||
![]() |
fb4da215ed |
Merge tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Evaluate PCI Boot Configuration _DSM to learn if firmware wants us to preserve its resource assignments (Benjamin Herrenschmidt) - Simplify resource distribution (Nicholas Johnson) - Decode 32 GT/s link speed (Gustavo Pimentel) Virtualization: - Fix incorrect caching of VF config space size (Alex Williamson) - Fix VF driver probing sysfs knobs (Alex Williamson) Peer-to-peer DMA: - Fix dma_virt_ops check (Logan Gunthorpe) Altera host bridge driver: - Allow building as module (Ley Foon Tan) Armada 8K host bridge driver: - add PHYs support (Miquel Raynal) DesignWare host bridge driver: - Export APIs to support removable loadable module (Vidya Sagar) - Enable Relaxed Ordering erratum workaround only on Tegra20 & Tegra30 (Vidya Sagar) Hyper-V host bridge driver: - Fix use-after-free in eject (Dexuan Cui) Mobiveil host bridge driver: - Clean up and fix many issues, including non-identify mapped windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou Zhiqiang) Qualcomm host bridge driver: - Use clk bulk API for 2.4.0 controllers (Bjorn Andersson) - Add QCS404 support (Bjorn Andersson) - Assert PERST for at least 100ms (Niklas Cassel) R-Car host bridge driver: - Add r8a774a1 DT support (Biju Das) Tegra host bridge driver: - Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol details) AER, GPIO-based PERST# (Manikanta Maddireddy) - Fix many issues, including power-on failure cases, interrupt masking in suspend, UPHY settings, AFI dynamic clock gating, pending DLL transactions (Manikanta Maddireddy) Xilinx host bridge driver: - Fix NWL Multi-MSI programming (Bharat Kumar Gogada) Endpoint support: - Fix 64bit BAR support (Alan Mikhak) - Fix pcitest build issues (Alan Mikhak, Andy Shevchenko) Bug fixes: - Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu) - Fix NVIDIA GPU HDA enablement issue (Lukas Wunner) - Ignore lockdep for sysfs "remove" (Marek Vasut) Misc: - Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)" * tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits) PCI: Enable NVIDIA HDA controllers tools: PCI: Fix installation when `make tools/pci_install` PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB PCI: Fix typos and whitespace errors PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr() PCI: mobiveil: Fix infinite-loop in the INTx handling function PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup PCI: mobiveil: Clear the control fields before updating it PCI: mobiveil: Add configured inbound windows counter PCI: mobiveil: Fix the valid check for inbound and outbound windows PCI: mobiveil: Clean-up program_{ib/ob}_windows() PCI: mobiveil: Remove an unnecessary return value check PCI: mobiveil: Fix error return values PCI: mobiveil: Refactor the MEM/IO outbound window initialization PCI: mobiveil: Make some register updates more readable PCI: mobiveil: Reformat the code for readability dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional ... |
||
![]() |
a48e23385f |
platform/x86: wmi: add context pointer field to struct wmi_device_id
When using wmi_install_notify_handler() to initialize a WMI handler a data pointer can be supplied which will be passed on to the notification handler. No similar feature exist when handling WMI events via struct wmi_driver. Add a context field pointer to struct wmi_device_id and add a function find_guid_context() to retrieve that context pointer. Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
||
![]() |
229b4e0728 |
Documentation: PCI: convert pci.txt to reST
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Move the description of struct pci_driver and struct pci_device_id into in-source comments. Signed-off-by: Changbin Du <changbin.du@gmail.com> [bhelgaas: fix kernel-doc warnings related to moving descriptions to linux/pci.h, fix "space tab" whitespace errors in mod_devicetable.h] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> |
||
![]() |
dbbdf54c72 |
Merge tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart: - use MODULE_DEVICE_TABLE across several wmi drivers, keeping wmi_device_id and MODULE_ALIAS() declarations in sync - add several Ideapad models to the no_hw_rfkill list - add support for new Mellanox platforms, including new fan and LED functionality - address Dell keyboard backlight change event and power button release issues - update dell_rbu to use appropriate memory allocation mechanisms - several small fixes and Ice Lake support for intel_pmc_core - fix a suspend regression for Cherry Trail based devices in intel_int0002_vgpio - a few other routine fixes * tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86: (50 commits) MAINTAINERS: Include mlxreg.h in Mellanox Platform Driver files platform/x86: ideapad-laptop: Add S130-14IGM to no_hw_rfkill list platform/x86: mlx-platform: Fix access mode for fan_dir attribute platform/x86: mlx-platform: Add UID LED for the next generation systems platform/x86: mlx-platform: Add extra CPLD for next generation systems platform/x86: wmi-bmof: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: intel-wmi-thunderbolt: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: huawei-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: dell-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: dell-wmi-descriptor: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: dell-smbios-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: wmi: add WMI support to MODULE_DEVICE_TABLE() platform/x86: wmi: move struct wmi_device_id to mod_devicetable.h modpost: file2alias: define size of alias platform/x86: touchscreen_dmi: Add info for the CHUWI Hi10 Air tablet platform/x86: ideapad-laptop: Add Ideapad 530S-14ARR to no_hw_rfkill list platform/x86: ideapad-laptop: Add Yoga C930 to no_hw_rfkill_list platform/x86: intel_pmc_core: Quirk to ignore XTAL shutdown platform/x86: intel_pmc_core: Add Package cstates residency info platform/x86: intel_pmc_core: Add ICL platform support ... |
||
![]() |
eacc95eae6 |
platform/x86: wmi: move struct wmi_device_id to mod_devicetable.h
In preparation for adding WMI support to MODULE_DEVICE_TABLE() move the definition of struct wmi_device_id to mod_devicetable.h and inline guid_string in the struct. Changing guid_string to an inline char array changes the loop conditions when looping over an array of struct wmi_device_id. Therefore update wmi_dev_match()'s loop to check for an empty guid_string instead of a NULL pointer. Signed-off-by: Mattias Jacobsson <2pi@mok.nu> [dvhart: Move UUID_STRING_LEN define to this patch] Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
![]() |
0fc1db9d10 |
tee: add bus driver framework for TEE based devices
Introduce a generic TEE bus driver concept for TEE based kernel drivers which would like to communicate with TEE based devices/services. Also add support in module device table for these new TEE based devices. In this TEE bus concept, devices/services are identified via Universally Unique Identifier (UUID) and drivers register a table of device UUIDs which they can support. So this TEE bus framework registers following apis: - match(): Iterates over the driver UUID table to find a corresponding match for device UUID. If a match is found, then this particular device is probed via corresponding probe api registered by the driver. This process happens whenever a device or a driver is registered with TEE bus. - uevent(): Notifies user-space (udev) whenever a new device is registered on this bus for auto-loading of modularized drivers. Also this framework allows for device enumeration to be specific to corresponding TEE implementation like OP-TEE etc. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> |
||
![]() |
b3cc2bfe72 |
Merge tag 'i3c/for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull initial i3c support from Boris Brezillon: "Add initial support for I3C along with two I3C master controller drivers" * tag 'i3c/for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: master: cdns: fix I2C transfers in Cadence I3C master driver ic3: off by one in mode_show() i3c: fix an error code in i3c_master_add_i3c_dev_locked() i3c: master: dw: fix mask operation by using the correct operator MAINTAINERS: Add myself as the dw-i3c-master module maintainer dt-binding: i3c: Document Synopsys DesignWare I3C i3c: master: Add driver for Synopsys DesignWare IP i3c: master: Remove set but not used variable 'old_i3c_scl_lim' dt-bindings: i3c: Document Cadence I3C master bindings i3c: master: Add driver for Cadence IP MAINTAINERS: Add myself as the I3C subsystem maintainer dt-bindings: i3c: Document core bindings i3c: Add sysfs ABI spec docs: driver-api: Add I3C documentation i3c: Add core I3C infrastructure |
||
![]() |
15c6d8e565 |
mod_devicetable.h: correct kerneldoc typo, "PHYSID2" -> "MII_PHYSID2"
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
![]() |
3a379bbcea |
i3c: Add core I3C infrastructure
Add core infrastructure to support I3C in Linux and document it. This infrastructure adds basic I3C support. Advanced features will be added afterwards. There are a few design choices that are worth mentioning because they impact the way I3C device drivers can interact with their devices: - all functions used to send I3C/I2C frames must be called in non-atomic context. Mainly done this way to ease implementation, but this is not set in stone, and if anyone needs async support, new functions can be added later on. - the bus element is a separate object, but it's tightly coupled with the master object. We thus have a 1:1 relationship between i3c_bus and i3c_master_controller objects, and if 2 master controllers are connected to the same bus and both exposed to the same Linux instance they will appear as two distinct busses, and devices on this bus will be exposed twice. - I2C backward compatibility has been designed to be transparent to I2C drivers and the I2C subsystem. The I3C master just registers an I2C adapter which creates a new I2C bus. I'd say that, from a representation PoV it's not ideal because what should appear as a single I3C bus exposing I3C and I2C devices here appears as 2 different buses connected to each other through the parenting (the I3C master is the parent of the I2C and I3C busses). On the other hand, I don't see a better solution if we want something that is not invasive. Missing features: - I3C HDR modes are not supported - no support for multi-master and the associated concepts (mastership handover, support for secondary masters, ...) - I2C devices can only be described using DT because this is the only use case I have. However, the framework can easily be extended with ACPI and board info support - I3C slave framework. This has been completely omitted, but shouldn't have a huge impact on the I3C framework because I3C slaves don't see the whole bus, it's only about handling master requests and generating IBIs. Some of the struct, constant and enum definitions could be shared, but most of the I3C slave framework logic will be different Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
d23df2dc56 |
linux/mod_devicetable.h: fix kernel-doc missing notation for typec_device_id
Fix kernel-doc warning for missing struct member description:
../include/linux/mod_devicetable.h:763: warning: Function parameter or member 'driver_data' not described in 'typec_device_id'
Fixes:
|
||
![]() |
8a37d87d72 |
usb: typec: Bus type for alternate modes
Introducing a simple bus for the alternate modes. Bus allows binding drivers to the discovered alternate modes the partners support. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
a569631306 |
Merge branch 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull dmi update from Jean Delvare: "Expose SKU ID string as a DMI attribute" * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware: dmi: Add access to the SKU ID string |
||
![]() |
b23908d3c4 |
firmware: dmi: Add access to the SKU ID string
This is used in some systems from user space for determining the identity of the device. Expose this as a file so that that user-space tools don't need to read from /sys/firmware/dmi/tables/DMI Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jean Delvare <jdelvare@suse.de> |
||
![]() |
6adba21eb4 |
soc: qcom: Add APR bus driver
This patch adds support to APR bus (Asynchronous Packet Router) driver. APR driver is made as a bus driver so that the apr devices can added removed more dynamically depending on the state of the services on the dsp. APR is used for communication between application processor and QDSP to use services on QDSP like Audio and others. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org> Acked-by: Andy Gross <andy.gross@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> |
||
![]() |
de40614de9 |
firmware: dmi_scan: Add DMI_OEM_STRING support to dmi_matches
OEM strings are defined by each OEM and they contain customized and useful OEM information. Supporting it provides more flexible uses of the dmi_matches function. Signed-off-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> |
||
![]() |
9251345dca |
soundwire: Add SoundWire bus type
This adds the base SoundWire bus type, bus and driver registration. along with changes to module device table for new SoundWire device type. Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Acked-By: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
3648e78ec7 |
slimbus: Add SLIMbus bus type
SLIMbus (Serial Low Power Interchip Media Bus) is a specification developed by MIPI (Mobile Industry Processor Interface) alliance. SLIMbus is a 2-wire implementation, which is used to communicate with peripheral components like audio-codec. SLIMbus uses Time-Division-Multiplexing to accommodate multiple data channels, and control channel. Control channel has messages to do device-enumeration, messages to send/receive control-data to/from SLIMbus devices, messages for port/channel management, and messages to do bandwidth allocation. The framework supports multiple instances of the bus (1 controller per bus), and multiple slave devices per controller. This patch adds support to basic silmbus core which includes support to SLIMbus type, slimbus device registeration and some basic data structures. Signed-off-by: Sagar Dharia <sdharia@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviwed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
2a171788ba |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net> |
||
![]() |
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
f8ddadc4db |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
There were quite a few overlapping sets of changes here. Daniel's bug fix for off-by-ones in the new BPF branch instructions, along with the added allowances for "data_end > ptr + x" forms collided with the metadata additions. Along with those three changes came veritifer test cases, which in their final form I tried to group together properly. If I had just trimmed GIT's conflict tags as-is, this would have split up the meta tests unnecessarily. In the socketmap code, a set of preemption disabling changes overlapped with the rename of bpf_compute_data_end() to bpf_compute_data_pointers(). Changes were made to the mv88e6060.c driver set addr method which got removed in net-next. The hyperv transport socket layer had a locking change in 'net' which overlapped with a change of socket state macro usage in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net> |
||
![]() |
e5f468b3f2 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov: - joydev now implements a blacklist to avoid creating joystick nodes for accelerometers found in composite devices such as PlaStation controllers - assorted driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ims-psu - check if CDC union descriptor is sane Input: joydev - blacklist ds3/ds4/udraw motion sensors Input: allow matching device IDs on property bits Input: factor out and export input_device_id matching code Input: goodix - poll the 'buffer status' bit before reading data Input: axp20x-pek - fix module not auto-loading for axp221 pek Input: tca8418 - enable interrupt after it has been requested Input: stmfts - fix setting ABS_MT_POSITION_* maximum size Input: ti_am335x_tsc - fix incorrect step config for 5 wire touchscreen Input: synaptics - disable kernel tracking on SMBus devices |
||
![]() |
8724ecb072 |
Input: allow matching device IDs on property bits
Let's allow matching input devices on their property bits, both in-kernel and when generating module aliases. Tested-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> |
||
![]() |
d1ff70241a |
thunderbolt: Add support for XDomain discovery protocol
When two hosts are connected over a Thunderbolt cable, there is a protocol they can use to communicate capabilities supported by the host. The discovery protocol uses automatically configured control channel (ring 0) and is build on top of request/response transactions using special XDomain primitives provided by the Thunderbolt base protocol. The capabilities consists of a root directory block of basic properties used for identification of the host, and then there can be zero or more directories each describing a Thunderbolt service and its capabilities. Once both sides have discovered what is supported the two hosts can setup high-speed DMA paths and transfer data to the other side using whatever protocol was agreed based on the properties. The software protocol used to communicate which DMA paths to enable is service specific. This patch adds support for the XDomain discovery protocol to the Thunderbolt bus. We model each remote host connection as a Linux XDomain device. For each Thunderbolt service found supported on the XDomain device, we create Linux Thunderbolt service device which Thunderbolt service drivers can then bind to based on the protocol identification information retrieved from the property directory describing the service. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
![]() |
00ee841590 |
mod_devicetable: Remove excess description from structured comment
Remove excess member description to fix following warnings in sphinx build: Excess struct/union/enum/typedef member 'ver_major' description in 'fsl_mc_device_id' Excess struct/union/enum/typedef member 'ver_minor' description in 'fsl_mc_device_id' Signed-off-by: sayli karnik <karniksayli1995@gmail.com> CC: Stuart Yoder <stuart.yoder@nxp.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
c61872c983 |
firmware: dmi: Add DMI_PRODUCT_FAMILY identification string
Sometimes it is more convenient to be able to match a whole family of products, like in case of bunch of Chromebooks based on Intel_Strago to apply a driver quirk instead of quirking each machine one-by-one. This adds support for DMI_PRODUCT_FAMILY identification string and also exports it to the userspace through sysfs attribute just like the existing ones. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
5e8cb40338 |
PCI: endpoint: Add EP core layer to enable EP controller and EP functions
Introduce a new EP core layer in order to support endpoint functions in linux kernel. This comprises the EPC library (Endpoint Controller Library) and EPF library (Endpoint Function Library). EPC library implements functions specific to an endpoint controller and EPF library implements functions specific to an endpoint function. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
![]() |
648ea01340 |
net: phy: Allow pre-declaration of MDIO devices
Allow board support code to collect pre-declarations for MDIO devices by registering them with mdiobus_register_board_info(). SPI and I2C buses have a similar feature, we were missing this for MDIO devices, but this is particularly useful for e.g: MDIO-connected switches which need to provide their port layout (often board-specific) to a MDIO Ethernet switch driver. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
![]() |
e28d2af436 |
s390/zcrypt: add multi domain support
Currently the ap infrastructure only supports one domain at a time. This feature extends the generic cryptographic device driver to support multiple cryptographic domains simultaneously. There are now card and queue devices on the AP bus with independent card and queue drivers. The new /sys layout is as follows: /sys/bus/ap devices <xx>.<yyyy> -> ../../../devices/ap/card<xx>/<xx>.<yyyy> ... card<xx> -> ../../../devices/ap/card<xx> ... drivers <drv>card card<xx> -> ../../../../devices/ap/card<xx> <drv>queue <xx>.<yyyy> -> ../../../../devices/ap/card<xx>/<xx>.<yyyy> ... /sys/devices/ap card<xx> <xx>.<yyyy> driver -> ../../../../bus/ap/drivers/<zzz>queue ... driver -> ../../../bus/ap/drivers/<drv>card ... The two digit <xx> field is the card number, the four digit <yyyy> field is the queue number and <drv> is the name of the device driver, e.g. "cex4". For compatability /sys/bus/ap/card<xx> for the old layout has to exist, including the attributes that used to reside there. With additional contributions from Harald Freudenberger and Martin Schwidefsky. Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> |
||
![]() |
0afef45654 |
staging: fsl-mc: add support for device table matching
Move the definition of fsl_mc_device_id to its proper location in mod_devicetable.h, and add fsl-mc bus support to devicetable-offsets.c and file2alias.c to enable device table matching. With this patch udev based module loading of fsl-mc drivers is supported. Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
af3ff643ea |
Drivers: hv: vmbus: Use uuid_le type consistently
Consistently use uuid_le type in the Hyper-V driver code. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
0280d1a099 |
Merge tag 'sound-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai: "Here is the first batch of updates for sound system on 4.4-rc1. Again at this time, the update looks fairly calm; no big changes in either ALSA core or ASoC infrastructures, rather all small cleanups, in addition to the new stuff as usual. The biggest changes are about Firewire sound devices. It gained lots of new device support, and MIDI functionality. Also there are updates for a few still working-in-progress stuff (topology API and ASoC skylake), too. But overall, this update should give no big surprise. Some highlights are below: Core: - A few more Kconfig items for tinification; it's marked as EXPERT, so normal user should't be bothered :) - Refactoring with a new PCM hw_constraint helper - Removal of unused transfer_ack_{begin,end} PCM callbacks Firewire: - Restructuring of code subtree, lots of refactoring - Support AMDTP variants - New driver for Digidesign 002/003 family - Adds support for TASCAM FireOne to ALSA OXFW driver - Add MIDI support to TASCAM and Digi00x devices HD-Audio: - Automated modalias generation for codec drivers, finally - Improvement on heuristics for setting mixer name - A few fixes for longstanding bugs on Creative CA0132 cards - Addition of audio rate callback with i915 communication - Fix suspend issue on recent Dell XPS - Intel Lewisburg controller support ASoC: - Updates to the topology userspace interface - Big updates to the Renesas support (rcar) - More updates for supporting Intel Sky Lake systems - New drivers for Asahi Kasei Microdevices AK4613, Allwinnner A10, Cirrus Logic WM8998, Dialog DA7219, Nuvoton NAU8825, Rockchip S/PDIF, and Atmel class D amplifier USB-Audio: - A fix for newer Roland MIDI devices - Quirks and workarounds for Zoom R16/24 device Misc: - A few fixes for some old Cirrus CS46xx PCI sound boards - Yet another fixes for some old ESS Maestro3 PCI sound boards" * tag 'sound-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (330 commits) ALSA: hda - Add Intel Lewisburg device IDs Audio ALSA: hda - Apply pin fixup for HP ProBook 6550b ALSA: hda - Fix lost 4k BDL boundary workaround ALSA: maestro3: Fix Allegro mute until master volume/mute is touched ALSA: maestro3: Enable docking support for Dell Latitude C810 ALSA: firewire-digi00x: add another rawmidi character device for MIDI control ports ALSA: firewire-digi00x: add MIDI operations for MIDI control port ALSA: firewire-digi00x: rename identifiers of MIDI operation for physical ports ALSA: cs46xx: Fix suspend for all channels ALSA: cs46xx: Fix Duplicate front for CS4294 and CS4298 codecs ALSA: DocBook: Add soc-ops.c and soc-compress.c ALSA: hda - Add / fix kernel doc comments ALSA: Constify ratden/ratnum constraints ALSA: hda - Disable 64bit address for Creative HDA controllers ALSA: hda/realtek - Dell XPS one ALC3260 speaker no sound after resume back ALSA: hda/ca0132 - Convert leftover pr_info() and pr_err() ASoC: fsl: Use #ifdef instead of #if for CONFIG_PM_SLEEP ASoC: rt5645: Sort the order for register bit defines ASoC: dwc: add check for master/slave format ASoC: rt5645: Add the HWEQ for the speaker output ... |
||
![]() |
da23ac1e40 |
ALSA: hda - Add hduadio support to DEVTABLE
For generating modalias entries automatically, move the definition of struct hda_device_id to linux/mod_devicetable.h and add the handling of this record in file2alias helper. The new modalias is represented with combination of vendor id, device id, and api version as "hdaudio:vNrNaN". This patch itself doesn't convert the existing modaliases. Since they were added manually, this patch won't give any regression by itself at this point. [Modified the modalias format to adapt the api_version field, and drop invalid ANY_ID definition by tiwai] Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Reviewed-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Subhransu S Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
![]() |
b26864cad1 |
mei: bus: add client protocol version to the device alias
The device alias now looks like mei:S:uuid:N:* In that way we can bind different drivers to clients with different protocol versions if required. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
59796edcf2 |
mei: make modules.alias UUID information easier to read
scripts/mod/file2alias.c:add_uuid() convert UUID into a single string which does not conform to the standard little endian UUID formatting. This patch changes add_uuid() to output same format as %pUL and modifies the mei driver to match the change. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
99d49e3af6 |
mod_devicetable: add space before */
Match the style of the other one-line comments. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
![]() |
26095a01d3 |
ACPI / scan: Add support for ACPI _CLS device matching
Device drivers typically use ACPI _HIDs/_CIDs listed in struct device_driver acpi_match_table to match devices. However, for generic drivers, we do not want to list _HID for all supported devices. Also, certain classes of devices do not have _CID (e.g. SATA, USB). Instead, we can leverage ACPI _CLS, which specifies PCI-defined class code (i.e. base-class, subclass and programming interface). This patch adds support for matching ACPI devices using the _CLS method. To support loadable module, current design uses _HID or _CID to match device's modalias. With the new way of matching with _CLS this would requires modification to the current ACPI modalias key to include _CLS. This patch appends PCI-defined class-code to the existing ACPI modalias as following. acpi:<HID>:<CID1>:<CID2>:..:<CIDn>:<bbsspp>: E.g: # cat /sys/devices/platform/AMDI0600:00/modalias acpi:AMDI0600:010601: where bb is th base-class code, ss is te sub-class code, and pp is the programming interface code Since there would not be _HID/_CID in the ACPI matching table of the driver, this patch adds a field to acpi_device_id to specify the matching _CLS. static const struct acpi_device_id ahci_acpi_match[] = { { ACPI_DEVICE_CLASS(PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff) }, {}, }; In this case, the corresponded entry in modules.alias file would be: alias acpi*:010601:* ahci_platform Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
2a298679b4 |
Merge tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH: "Here's the big USB patchset for 4.2-rc1. As is normal these days, the majority of changes are in the gadget drivers, with a bunch of other small driver changes. All of these have been in linux-next with no reported issues" * tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (175 commits) usb: dwc3: Use ASCII space in Kconfig usb: chipidea: add work-around for Marvell HSIC PHY startup usb: chipidea: allow multiple instances to use default ci_default_pdata dt-bindings: Consolidate ChipIdea USB ci13xxx bindings phy: add Marvell HSIC 28nm PHY phy: Add Marvell USB 2.0 OTG 28nm PHY dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings USB: ssb: use devm_kzalloc USB: ssb: fix error handling in ssb_hcd_create_pdev() usb: isp1760: check for null return from kzalloc cdc-acm: Add support of ATOL FPrint fiscal printers usb: chipidea: usbmisc_imx: Remove unneeded semicolon USB: usbtmc: add device quirk for Rigol DS6104 USB: serial: mos7840: Use setup_timer phy: twl4030-usb: add ABI documentation phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function. phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback. phy: twl4030-usb: make runtime pm more reliable. drivers:usb:fsl: Fix compilation error for fsl ehci drv usb: renesas_usbhs: Don't disable the pipe if Control write status stage ... |
||
![]() |
b144ce2d37 |
mei: fix up uuid matching
A previous commit, |
||
![]() |
c93b76b34b |
mei: bus: report also uuid in module alias
In order to automate modules matching add device uuid which is reported in client enumeration, keep also the name that is needed in for nfc distinguishing radio vendor Report mei:name:uuid Cc: linux-api@vger.kernel.org Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
289fcff4bc |
usb: add bus type for USB ULPI
UTMI+ Low Pin Interface (ULPI) is a commonly used PHY interface for USB 2.0. The ULPI specification describes a standard set of registers which the vendors can extend for their specific needs. ULPI PHYs provide often functions such as charger detection and ADP sensing and probing. There are two major issues that the bus type is meant to tackle: Firstly, ULPI registers are accessed from the controller. The bus provides convenient method for the controller drivers to share that access with the actual PHY drivers. Secondly, there are already platforms that assume ULPI PHYs are runtime detected, such as many Intel Baytrail based platforms. They do not provide any kind of hardware description for the ULPI PHYs like separate ACPI device object that could be used to enumerate a device from. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com> |
||
![]() |
8286ae0330 |
MIPS: Add CDMM bus support
Add MIPS Common Device Memory Map (CDMM) support in the form of a bus in the standard Linux device model. Each device attached via CDMM is discoverable via an 8-bit type identifier and may contain a number of blocks of memory mapped registers in the CDMM region. IRQs are expected to be handled separately. Due to the per-cpu (per-VPE for MT cores) nature of the CDMM devices, all the driver callbacks take place from workqueues which are run on the right CPU for the device in question, so that the driver doesn't need to be as concerned about which CPU it is running on. Callbacks also exist for when CPUs are taken offline, so that any per-CPU resources used by the driver can be disabled so they don't get forcefully migrated. CDMM devices are created as children of the CPU device they are attached to. Any existing CDMM configuration by the bootloader will be inherited, however platforms wishing to enable CDMM should implement the weak mips_cdmm_phys_base() function (see asm/cdmm.h) so that the bus driver knows where it should put the CDMM region in the physical address space if the bootloader hasn't already enabled it. A mips_cdmm_early_probe() function is also provided to allow early boot or particularly low level code to set up the CDMM region and probe for a specific device type, for example early console or KGDB IO drivers for the EJTAG Fast Debug Channel (FDC) CDMM device. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9599/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
||
![]() |
f5af19d10d |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking updates from David Miller: 1) Missing netlink attribute validation in nft_lookup, from Patrick McHardy. 2) Restrict ipv6 partial checksum handling to UDP, since that's the only case it works for. From Vlad Yasevich. 3) Clear out silly device table sentinal macros used by SSB and BCMA drivers. From Joe Perches. 4) Make sure the remote checksum code never creates a situation where the remote checksum is applied yet the tunneling metadata describing the remote checksum transformation is still present. Otherwise an external entity might see this and apply the checksum again. From Tom Herbert. 5) Use msecs_to_jiffies() where applicable, from Nicholas Mc Guire. 6) Don't explicitly initialize timer struct fields, use setup_timer() and mod_timer() instead. From Vaishali Thakkar. 7) Don't invoke tg3_halt() without the tp->lock held, from Jun'ichi Nomura. 8) Missing __percpu annotation in ipvlan driver, from Eric Dumazet. 9) Don't potentially perform skb_get() on shared skbs, also from Eric Dumazet. 10) Fix COW'ing of metrics for non-DST_HOST routes in ipv6, from Martin KaFai Lau. 11) Fix merge resolution error between the iov_iter changes in vhost and some bug fixes that occurred at the same time. From Jason Wang. 12) If rtnl_configure_link() fails we have to perform a call to ->dellink() before unregistering the device. From WANG Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (39 commits) net: dsa: Set valid phy interface type rtnetlink: call ->dellink on failure when ->newlink exists com20020-pci: add support for eae single card vhost_net: fix wrong iter offset when setting number of buffers net: spelling fixes net/core: Fix warning while make xmldocs caused by dev.c net: phy: micrel: disable NAND-tree for KSZ8021, KSZ8031, KSZ8051, KSZ8081 ipv6: fix ipv6_cow_metrics for non DST_HOST case openvswitch: Fix key serialization. r8152: restore hw settings hso: fix rx parsing logic when skb allocation fails tcp: make sure skb is not shared before using skb_get() bridge: netfilter: Move sysctl-specific error code inside #ifdef ipv6: fix possible deadlock in ip6_fl_purge / ip6_fl_gc ipvlan: add a missing __percpu pcpu_stats tg3: Hold tp->lock before calling tg3_halt() from tg3_init_one() bgmac: fix device initialization on Northstar SoCs (condition typo) qlcnic: Delete existing multicast MAC list before adding new net/mlx5_core: Fix configuration of log_uar_page_sz sunvnet: don't change gso data on clones ... |
||
![]() |
e29876723f |
Merge tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB patches from Greg KH: "Here's the big pull request for the USB driver tree for 3.20-rc1. Nothing major happening here, just lots of gadget driver updates, new device ids, and a bunch of cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (299 commits) usb: musb: fix device hotplug behind hub usb: dwc2: Fix a bug in reading the endpoint directions from reg. staging: emxx_udc: fix the build error usb: Retry port status check on resume to work around RH bugs Revert "usb: Reset USB-3 devices on USB-3 link bounce" uhci-hub: use HUB_CHAR_* usb: kconfig: replace PPC_OF with PPC ehci-pci: disable for Intel MID platforms (update) usb: gadget: Kconfig: use bool instead of boolean usb: musb: blackfin: remove incorrect __exit_p() USB: fix use-after-free bug in usb_hcd_unlink_urb() ehci-pci: disable for Intel MID platforms usb: host: pci_quirks: joing string literals USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd) USB: usbfs: allow URBs to be reaped after disconnection cdc-acm: kill unnecessary messages cdc-acm: add sanity checks usb: phy: phy-generic: Fix USB PHY gpio reset usb: dwc2: fix USB core dependencies usb: renesas_usbhs: fix NULL pointer dereference in dma_release_channel() ... |