Drivers must fill out the handle_to_fd and fd_to_handle hooks to
enable export/import prime functionality already. The additional
DRIVER_PRIME flag doesn't serve any real purpose, since the overall
flag doesn't even tell you whether import or export or maybe even both
is supported.
Ditch it.
This patch just makes it defunct, subsequent patches will remove it
from all the drivers.
Note this changes the userspace visible errno in some situations from
EOPNOTSUPP to ENOSYS. Userspace already needs to treat both as "no
prime support", so this should break anything.
v2: Improve commit message as suggested by Emil
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-6-daniel.vetter@ffwll.ch
Yes this is a bit a big patch, but since it's essentially a complete
rewrite of all the prime docs I didn't see how to better split it up.
Changes:
- Consistently point to drm_gem_object_funcs as the preferred hooks,
where applicable.
- Document all the hooks in &drm_driver that lacked kerneldoc.
- Completely new overview section, which now also includes the cleaned
up lifetime/reference counting subchapter. I also mentioned the weak
references in there due to the lookup caches.
- Completely rewritten helper intro section, highlight the
import/export related functionality.
- Polish for all the functions and more cross references.
I also sprinkled a bunch of todos all over.
Most important: 0 code changes in here. The cleanup motivated by
reading and improving all this will follow later on.
v2: Actually update the prime helper docs. Plus add a few FIXMEs that
I won't address right away in subsequent cleanup patches.
v3:
- Split out the function moving. This patch is now exclusively
documentation changes.
- Typos and nits (Sam).
v4: Polish suggestions from Noralf.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620124615.24434-1-daniel.vetter@ffwll.ch
Komeda interrupts may be shared with other hardware blocks.
One needs to use devm_request_irq() with IRQF_SHARED to create a shared
interrupt handler.
As a result of not using drm_irq_install() api, one needs to set
"(struct drm_device *)->irq_enabled = true/false" to enable/disable
vblank interrupts.
Changes from v1:-
1. Squashed the following two patches into one (as the second patch is a
consequence of the first one):-
drm/komeda: Avoid using DRIVER_IRQ_SHARED
drm/komeda: Enable/Disable vblank interrupts
2. Fixed the commit message (as pointed by Daniel Vetter)
3. Removed calls to 'drm_irq_uninstall()' as we are no longer using
drm_irq_install()
4. Removed the struct member 'komeda_kms_driver.irq_handler' as it is not
used anywhere.
Signed-off-by: Ayan Halder <ayan.halder@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
clang points out a bug in the clock calculation on 32-bit, that leads
to the clock_ratio always being zero:
drivers/gpu/drm/arm/display/komeda/komeda_crtc.c:31:36: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
aclk = komeda_calc_aclk(kcrtc_st) << 32;
Move the shift into the division to make it apply on a 64-bit
variable. Also use the more expensive div64_u64() instead of div_u64()
to account for pxlclk being a 64-bit integer.
Fixes: 1f7f9ab790 ("drm/komeda: Add engine clock requirement check for the downscaling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Features:
- HDR support (Uma, Ville)
- Add I2C symlink under HDMI connector similar to DP (Oleg)
- Add ICL multi-segmented gamma support (Shashank, Uma)
- Update register whitelist support for new hardware (Robert, John)
- GuC firmware update with updated ABI interface (Michal, Oscar)
- Add support for new DMC header versions (Lucas)
- In-kernel blitter client for selftest use (Matthew)
- Add Mule Creec Canyon (MCC) PCH support to go with EHL (Matt)
- EHL platform feature updates (Matt)
- Use Command Transport Buffers with GuC on all gens (Daniele)
- New i915.force_probe module parameter to replace i915.alpha_support (Jani)
Refactoring:
- Better runtime PM code abstraction/encapsulation (Daniele)
- VBT parsing cleanup and improvements (Jani)
- Move display code to its own subdirectory (Jani)
- Header cleanup (Jani, Daniele)
- Prep work for subsclice mask expansion (Stuart)
- Use uncore mmio register accessors more, remove unused macro wrappers (Tvrtko)
- Remove unused atomic property get/set stubs (Maarten)
- GTT cleanups and improvements (Mika)
- Pass intel_ types instead of drm_ types in plenty of display code (Ville)
- Engine reset, hangcheck, fault code cleanups and improvements (Tvrtko)
- Consider AML variants simply as either KBL or CFL ULX (Ville)
- State checker cleanups and improvements (Ville)
- GEM code reorganization to more files under gem subdirectory (Chris)
- Reducing dependency on a coarse struct_mutex (Chris)
Fixes:
- Fix use of uninitialized/incorrect error pointers (Colin, Dan)
- Fix DSI fastboot on some VLV/CHV platforms (Hans)
- Fix DSI error path (Hans)
- Add ICL port A combo PHY HW state check (Imre)
- Fix ICL AUX-B HW not done issue (Imre)
- Fix perf whitelist on gen10+ (Lionel)
- Fix PSR exit by forcing manual exit on older gens (José)
- Match voltage ranges instead of exact values (Lucas)
- Fix SDVO HDMI audio, with cleanups (Ville)
- Fix plane state dumps (Ville)
- Fix driver cleanup code to support driver hot unbind (Janusz)
- Add checks for ICL memory bandwidth requirements (Ville)
- Fix toggling between no C8 planes vs. at least one C8 plane (Ville)
- Improved checks on PLL usage conditions, refactoring (Ville)
- Avoid clobbering M/N values in fastset fuzzy checks (Ville)
- Take a runtime pm wakeref for atomic commits (Chris)
- Do not allow runtime pm autosuspend to remove userspace GGTT mmaps too quickly (Chris)
- Avoid refcount_inc on known zero count to avoid debug flagging (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v9x1lpdh.fsf@intel.com
drm-misc-next for v5.3:
UAPI Changes:
- Give each dma-buf their own inode, add DMA_BUF_SET_NAME ioctl and a show_fdinfo handler.
Cross-subsystem Changes:
- Pull in the topic/remove-fbcon-notifiers branch:
* remove fbdev notifier usage for fbcon, as prep work to clean up the fbcon locking
* assorted locking checks in vt/console code
* assorted notifier and cleanups in fbdev and backlight code
Core Changes:
- Make drm_debugfs_create_files() never fail.
- add debug print to update_vblank_count.
- Add DP_DPCD_QUIRK_NO_SINK_COUNT quirk.
- Add todo item for drm_gem_objects.
- Unexport drm_gem_(un)pin/v(un)map.
- Document struct drm_cmdline_mode.
- Rewrite the command handler for mode names, and add support to specify
rotation, reflection and overscan. With a new selftest! :)
- Fixes to drm/client for improving rotation support, and fixing variable scope.
- Small fixes to self refresh helper.
Driver Changes:
- Add rockchip RK3328 support.
- Assorted driver fixes to rockchip, vc4, rcar-du, vkms.
- Expose panfrost performance counters through unstable ioctl's, hidden
behind a module parameter.
- Enumerate CRC sources list in vkms.
- Add a basic kms driver for the Ingenic JZ47xx SoC, which will be expanded
soon with more advanced features.
- Suspend/resume fix for stm.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/18e22ec1-adf3-3a75-34a3-9fe09a91eef5@linux.intel.com
Since from navi10, the tmr_size should be decided by psp sos according to
toc header. Driver should issue LOAD_TOC to psp sos to get the tmr_size needed.
The allocation of tmr_size then should be done only when sos/sysdrv loading
completed
Accordingly, asd_init also move to psp_hw_start after sos fw loading to make
calling sequence consistent.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Navi10 will have toc built-in sos binary so that using header.ucode_size_bytes
minus sos_size_bytes actually is not sys_bin_size.
Using sos_offset_bytes works for both vega20 (psp_firmware_header_v1_0) and
navi10 (psp_firmware_header_v1_1)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the psp interface for the new commands.
v2: rebase (Alex)
FIXME:
GFX_CMD_ID_PROG_REG = 0x0000000B, /* program regs */
GFX_CMD_ID_LOAD_TOC = 0x0000000B, /* Load TOC and obtain TMR size */
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of putting toc into driver source code, the toc will
be part of psp_sos fw. Driver need to get and parse it from
psp fw
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Table Of Content (TOC) is used by RLC to auto load gc firmwares.
PSP need to parse the toc to calculate the tmr size needed and
load gc firmwares to tmr for RLC to auto load them finally
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
