The three paths to build the umem_odps are kind of muddled, they are:
- As a normal ib_mr umem
- As a child in an implicit ODP umem tree
- As the root of an implicit ODP umem tree
Only the first two are actually umem's, the last is an abuse.
The implicit case can only be triggered by explicit driver request, it
should never be co-mingled with the normal case. While we are here, make
sensible function names and add some comments to make this clearer.
Link: https://lore.kernel.org/r/20190819111710.18440-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Implicit ODP umems are special, they don't have any page lists, they don't
exist in the interval tree and they are never DMA mapped.
Instead of trying to guess this based on a zero length use an explicit
flag.
Further, do not allow non-implicit umems to be 0 size.
Link: https://lore.kernel.org/r/20190819111710.18440-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ODP depends on the several device capabilities, among them is the ability
to send UMR WQEs with that modify atomic and entity size of the MR.
Therefore, only if all conditions to send such a UMR WQE are met then
driver can report that ODP is supported. Use this check of conditions
in all places where driver needs to know about ODP support.
Also, implicit ODP support depends on ability of driver to send UMR WQEs
for an indirect mkey. Therefore, verify that all conditions to do so are
met when reporting support.
Fixes: c8d75a980f ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-7-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Merging tip of mlx5-next in order to get changes related to adding
XRQ support to the DEVX interface needed prior to the following two
patches.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Once implicit MR is being called to be released by
ib_umem_notifier_release() its leaves were marked as "dying".
However, when dereg_mr()->mlx5_ib_free_implicit_mr()->mr_leaf_free() is
called, it skips running the mr_leaf_free_action (i.e. umem_odp->work)
when those leaves were marked as "dying".
As such ib_umem_release() for the leaves won't be called and their MRs
will be leaked as well.
When an application exits/killed without calling dereg_mr we might hit the
above flow.
This fatal scenario is reported by WARN_ON() upon
mlx5_ib_dealloc_ucontext() as ibcontext->per_mm_list is not empty, the
call trace can be seen below.
Originally the "dying" mark as part of ib_umem_notifier_release() was
introduced to prevent pagefault_mr() from returning a success response
once this happened. However, we already have today the completion
mechanism so no need for that in those flows any more. Even in case a
success response will be returned the firmware will not find the pages and
an error will be returned in the following call as a released mm will
cause ib_umem_odp_map_dma_pages() to permanently fail mmget_not_zero().
Fix the above issue by dropping the "dying" from the above flows. The
other flows that are using "dying" are still needed it for their
synchronization purposes.
WARNING: CPU: 1 PID: 7218 at
drivers/infiniband/hw/mlx5/main.c:2004
mlx5_ib_dealloc_ucontext+0x84/0x90 [mlx5_ib]
CPU: 1 PID: 7218 Comm: ibv_rc_pingpong Tainted: G E
5.2.0-rc6+ #13
Call Trace:
uverbs_destroy_ufile_hw+0xb5/0x120 [ib_uverbs]
ib_uverbs_close+0x1f/0x80 [ib_uverbs]
__fput+0xbe/0x250
task_work_run+0x88/0xa0
do_exit+0x2cb/0xc30
? __fput+0x14b/0x250
do_group_exit+0x39/0xb0
get_signal+0x191/0x920
? _raw_spin_unlock_bh+0xa/0x20
? inet_csk_accept+0x229/0x2f0
do_signal+0x36/0x5e0
? put_unused_fd+0x5b/0x70
? __sys_accept4+0x1a6/0x1e0
? inet_hash+0x35/0x40
? release_sock+0x43/0x90
? _raw_spin_unlock_bh+0xa/0x20
? inet_listen+0x9f/0x120
exit_to_usermode_loop+0x5c/0xc6
do_syscall_64+0x182/0x1b0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 81713d3788 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20190805083010.21777-1-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reference counters are preferred to use refcount_t instead of
atomic_t.
This is because the implementation of refcount_t can prevent
overflows and detect possible use-after-free.
So convert atomic_t ref counters to refcount_t.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The "MLX5_CMD_OP_QUERY_LAG" is one of the DEVX general commands, add it.
Fixes: 8aa8c95ce4 ("IB/mlx5: Add support for DEVX general command")
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The fix for IB port statistics initialization ("IB/core: Fix querying
total rdma stats") is needed before we take a follow-on patch to
for-next.
Signed-off-by: Doug Ledford <dledford@redhat.com>
When parent mlx5_core_dev is in switchdev mode, q_counters are not
applicable to multiple non uplink vports.
Hence, have make them limited to device level.
While at it, correct __mlx5_ib_qp_set_counter() and
__mlx5_ib_modify_qp() to use u16 set_id as defined by the device.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190723073117.7175-3-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Limit the number of PSV's created through devx to 1, to create a symmetry
between create/destroy cmds. In the kernel, one can create up to 4 PSV's
using CREATE_PSV cmd but the destruction is one by one. Add a protection
for this a-symmetric definition for devx.
Link: https://lore.kernel.org/r/20190723070412.6385-1-leon@kernel.org
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The device requires that memory registration work requests that update the
address translation table of a MR will be fenced if posted together. This
scenario can happen when address ranges are invalidated by the mmu in
separate concurrent calls to the invalidation callback.
We prefer to block concurrent address updates for a single MR over fencing
since making the decision if a WQE needs fencing will be more expensive
and fencing all WQEs is a too radical choice.
Further, it isn't clear that this code can even run safely concurrently,
so a lock is a safer choice.
Fixes: b4cfe447d4 ("IB/mlx5: Implement on demand paging by adding support for MMU notifiers")
Link: https://lore.kernel.org/r/20190723065733.4899-8-leon@kernel.org
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix unreg_umr to move the MR to a kernel owned PD (i.e. the UMR PD) which
can't be accessed by userspace.
This ensures that nothing can continue to access the MR once it has been
placed in the kernels cache for reuse.
MRs in the cache continue to have their HW state, including DMA tables,
present. Even though the MR has been invalidated, changing the PD provides
an additional layer of protection against use of the MR.
Link: https://lore.kernel.org/r/20190723065733.4899-5-leon@kernel.org
Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use a direct firmware command to destroy the mkey in case the unreg UMR
operation has failed.
This prevents a case that a mkey will leak out from the cache post a
failure to be destroyed by a UMR WR.
In case the MR cache limit didn't reach a call to add another entry to the
cache instead of the destroyed one is issued.
In addition, replaced a warn message to WARN_ON() as this flow is fatal
and can't happen unless some bug around.
Link: https://lore.kernel.org/r/20190723065733.4899-4-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.10
Fixes: 49780d42df ("IB/mlx5: Expose MR cache for mlx5_ib")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Enable RDMA DIM by default for better user experience.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Userspace expects the IB_TM_CAP_RC bit to indicate that the device
supports RC transport tag matching with rendezvous offload. However the
firmware splits this into two capabilities for eager and rendezvous tag
matching.
Only if the FW supports both modes should userspace be told the tag
matching capability is available.
Cc: <stable@vger.kernel.org> # 4.13
Fixes: eb76189435 ("IB/mlx5: Fill XRQ capabilities")
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Max Gurtovoy says:
====================
Those two patches introduce VHCA tunnel mechanism to DEVX interface
needed for Bluefield SOC. See extensive commit messages for more
information.
====================
Based on the mlx5-next branch from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for
dependencies
* branch 'vcha-tunnel':
IB/mlx5: Implement VHCA tunnel mechanism in DEVX
net/mlx5: Introduce VHCA tunnel device capability
This mechanism will allow function-A to perform operations "on behalf" of
function-B via tunnel object. Function-A will have privileges for creating
and using this tunnel object.
For example, in the device emulation feature presented in Bluefield-1 SoC,
using device emulation capability, one can present NVMe function to the
host OS.
Since the NVMe function doesn't have a normal command interface to the HCA
HW, here is a need to create a channel that will be able to issue commands
"on behalf" of this function.
This channel is the VHCA_TUNNEL general object. The emulation software
will create this tunnel for every managed function and issue commands via
devx general cmd interface using the appropriate tunnel ID. When devX
context will receive a command with non-zero vhca_tunnel_id, it will pass
the command as-is down to the HCA.
All the validation, security and resource tracking of the commands and the
created tunneled objects is in the responsibility of the HCA FW. When a
VHCA_TUNNEL object destroyed, the device will issue an internal
FLR (function level reset) to the emulated function associated with this
tunnel. This will destroy all the created resources using the tunnel
mechanism.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add support for ib callbacks counter_bind_qp(), counter_unbind_qp() and
counter_dealloc().
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add counter set id as a parameter so that this API can be used for
querying any q counter.
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Support bind a qp with counter. If counter is null then bind the qp to the
default counter. Different QP state has different operation:
- RESET: Set the counter field so that it will take effective during
RST2INIT change;
- RTS: Issue an RTS2RTS change to update the QP counter;
- Other: Set the counter field and mark the counter_pending flag, when QP
is moved to RTS state and this flag is set, then issue an RTS2RTS
modification to update the counter.
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Required for dependencies in the next patches.
* mlx5-next:
net/mlx5: Add rts2rts_qp_counters_set_id field in hca cap
net/mlx5: Properly name the generic WQE control field
net/mlx5: Introduce TLS TX offload hardware bits and structures
net/mlx5: Refactor mlx5_esw_query_functions for modularity
net/mlx5: E-Switch prepare functions change handler to be modular
net/mlx5: Introduce and use mlx5_eswitch_get_total_vports()
There is no need in custom memory zeroing, because it can be done
by using kzalloc from the beginning.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
No need any more to hold mlx5_core_dev on the devx_object, it can be
accessed from ib_dev.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add DEVX support for CQ events by creating and destroying the CQ via
mlx5_core and set an handler to manage its completions.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Implement DEVX dispatching event by looking up for the applicable
subscriptions for the reported event and using their target fd to
signal/set the event.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
