For creation, as soon as the umem_odp is created the notifier can be
called, however the underlying MR may not have been setup yet. This would
cause problems if mlx5_ib_invalidate_range() runs. There is some
confusing/ulocked/racy code that might by trying to solve this, but
without locks it isn't going to work right.
Instead trivially solve the problem by short-circuiting the invalidation
if there are not yet any DMA mapped pages. By definition there is nothing
to invalidate in this case.
The create code will have the umem fully setup before anything is DMA
mapped, and npages is fully locked by the umem_mutex.
For destroy, invalidate the entire MR at the HW to stop DMA then DMA unmap
the pages before destroying the MR. This drives npages to zero and
prevents similar racing with invalidate while the MR is undergoing
destruction.
Arguably it would be better if the umem was created after the MR and
destroyed before, but that would require a big rework of the MR code.
Fixes: 6aec21f6a8 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191009160934.3143-15-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These mkeys are entirely internal and are never used by the HW for
page fault. They should also never be used by userspace for prefetch.
Simplify & optimize things by not including them in the xarray.
Since the prefetch path can now never see a child mkey there is no need
for the second synchronize_srcu() during imr destroy.
Link: https://lore.kernel.org/r/20191009160934.3143-14-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use SRCU in a sensible way by removing all MRs in the implicit tree from
the two xarrays (the update operation), then a synchronize, followed by a
normal single threaded teardown.
This is only a little unusual from the normal pattern as there can still
be some work pending in the unbound wq that may also require a workqueue
flush. This is tracked with a single atomic, consolidating the redundant
existing atomics and wait queue.
For understand-ability the entire ODP implicit create/destroy flow now
largely exists in a single pair of functions within odp.c, with a few
support functions for tearing down an unused child.
Link: https://lore.kernel.org/r/20191009160934.3143-13-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that the locking is simplified combine pagefault_implicit_mr() with
implicit_mr_get_data() so that we sweep over the idx range only once,
and do the single xlt update at the end, after the child umems are
setup.
This avoids double iteration/xa_loads plus the sketchy failure path if the
xa_load() fails.
Link: https://lore.kernel.org/r/20191009160934.3143-12-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that the child MRs are stored in an xarray we can rely on the SRCU
lock to protect the xa_load and use xa_cmpxchg on the slow allocation path
to resolve races with concurrent page fault.
This reduces the scope of the critical section of umem_mutex for implicit
MRs to only cover mlx5_ib_update_xlt, and avoids taking a lock at all if
the child MR is already in the xarray. This makes it consistent with the
normal ODP MR critical section for umem_lock, and the locking approach
used for destroying an unusued implicit child MR.
The MLX5_IB_UPD_XLT_ATOMIC is no longer needed in implicit_get_child_mr()
since it is no longer called with any locks.
Link: https://lore.kernel.org/r/20191009160934.3143-11-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently the child leaves are stored in the shared interval tree and
every lookup for a child must be done under the interval tree rwsem.
This is further complicated by dropping the rwsem during iteration (ie the
odp_lookup(), odp_next() pattern), which requires a very tricky an
difficult to understand locking scheme with SRCU.
Instead reserve the interval tree for the exclusive use of the mmu
notifier related code in umem_odp.c and give each implicit MR a xarray
containing all the child MRs.
Since the size of each child is 1GB of VA, a 1 level xarray will index 64G
of VA, and a 2 level will index 2TB, making xarray a much better
data structure choice than an interval tree.
The locking properties of xarray will be used in the next patches to
rework the implicit ODP locking scheme into something simpler.
At this point, the xarray is locked by the implicit MR's umem_mutex, and
read can also be locked by the odp_srcu.
Link: https://lore.kernel.org/r/20191009160934.3143-10-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The single routine has a very confusing scheme to advance to the next
child MR when working on an implicit parent. This scheme can only be used
when working with an implicit parent and must not be triggered when
working on a normal MR.
Re-arrange things by directly putting all the single-MR stuff into one
function and calling it in a loop for the implicit case. Simplify some of
the error handling in the new pagefault_real_mr() to remove unneeded gotos.
Link: https://lore.kernel.org/r/20191009160934.3143-9-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This makes the routines easier to understand, particularly with respect
the locking requirements of the entire sequence. The implicit_mr_alloc()
had a lot of ifs specializing it to each of the callers, and only a very
small amount of code was actually shared.
Following patches will cause the flow in the two functions to diverge
further.
Link: https://lore.kernel.org/r/20191009160934.3143-7-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This function is intended to loop across each MTT chunk in the implicit
parent that intersects the range [io_virt, io_virt+bnct). But it is has a
confusing construction, so:
- Consistently use imr and odp_imr to refer to the implicit parent
to avoid confusion with the normal mr and odp of the child
- Directly compute the inclusive start/end indexes by shifting. This is
clearer to understand the intent and avoids any errors from unaligned
values of addr
- Iterate directly over the range of MTT indexes, do not make a loop
out of goto
- Follow 'success oriented flow', with goto error unwind
- Directly calculate the range of idx's that need update_xlt
- Ensure that any leaf MR added to the interval tree always results in an
update to the XLT
Link: https://lore.kernel.org/r/20191009160934.3143-6-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a per device xarray storing mkeys that is used to store every
mkey in the system. However, this xarray is now only read by ODP for
certain ODP designated MRs (ODP, implicit ODP, MW, DEVX_INDIRECT).
Create an xarray only for use by ODP, that only contains ODP related
MKeys. This xarray is protected by SRCU and all erases are protected by a
synchronize.
This improves performance:
- All MRs in the odp_mkeys xarray are ODP MRs, so some tests for is_odp()
can be deleted. The xarray will also consume fewer nodes.
- normal MR's are never mixed with ODP MRs in a SRCU data structure so
performance sucking synchronize_srcu() on every MR destruction is not
needed.
- No smp_load_acquire(live) and xa_load() double barrier on read
Due to the SRCU locking scheme care must be taken with the placement of
the xa_store(). Once it completes the MR is immediately visible to other
threads and only through a xa_erase() & synchronize_srcu() cycle could it
be destroyed.
Link: https://lore.kernel.org/r/20191009160934.3143-4-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The locking model for signature is completely different than ODP, do not
share the same xarray that relies on SRCU locking to support ODP.
Simply store the active mlx5_core_sig_ctx's in an xarray when signature
MRs are created and rely on trivial xarray locking to serialize
everything.
The overhead of storing only a handful of SIG related MRs is going to be
much less than an xarray full of every mkey.
Link: https://lore.kernel.org/r/20191009160934.3143-3-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When working with SRCU protected xarrays the xarray itself should be the
SRCU 'update' point. Instead prefetch is using live as the SRCU update
point and this prevents switching the locking design to use the xarray
instead.
To solve this the prefetch must only read from the xarray once, and hold
on to the actual MR pointer for the duration of the async
operation. Incrementing num_pending_prefetch delays destruction of the MR,
so it is suitable.
Prefetch calls directly to the pagefault_mr using the MR pointer and only
does a single xarray lookup.
All the testing if a MR is prefetchable or not is now done only in the
prefetch code and removed from the pagefault critical path.
Link: https://lore.kernel.org/r/20191009160934.3143-2-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Linux 5.4-rc5
For dependencies in the next patches
Conflict resolved by keeping the delete of the unlock.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Provide an ODP explicit/implicit type as part of 'rdma -dd resource show
mr' dump.
For example:
$ rdma -dd resource show mr
dev mlx5_0 mrn 1 rkey 0xa99a lkey 0xa99a mrlen 50000000
pdn 9 pid 7372 comm ibv_rc_pingpong drv_odp explicit
For non-ODP MRs, we won't print "drv_odp ..." at all.
Link: https://lore.kernel.org/r/20191016062308.11886-4-leon@kernel.org
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce ODP diagnostic counters and count the following
per MR within IB/mlx5 driver:
1) Page faults:
Total number of faulted pages.
2) Page invalidations:
Total number of pages invalidated by the OS during all
invalidation events. The translations can be no longer
valid due to either non-present pages or mapping changes.
Link: https://lore.kernel.org/r/20191016062308.11886-2-leon@kernel.org
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From Yamin Friedman:
====================
This series from Yamin implements long standing "TODO" existed in rw.c. It
allows the driver to specify a cut-over point where it is faster to build
a lkey MR rather than do a large SGL for RDMA READ operations.
mlx5 HW gets a notable performane boost by switching to MRs.
====================
Based on the mlx5-next branch from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for
dependencies
* branch 'mlx5-rd-sgl': (3 commits)
RDMA/mlx5: Add capability for max sge to get optimized performance
RDMA/rw: Support threshold for registration vs scattering to local pages
net/mlx5: Expose optimal performance scatter entries capability
Allows the IB device to provide a value of maximum scatter gather entries
per RDMA READ.
In certain cases it may be preferable for a device to perform UMR memory
registration rather than have many scatter entries in a single RDMA READ.
This provides a significant performance increase in devices capable of
using different memory registration schemes based on the number of scatter
gather entries. This general capability allows each device vendor to fine
tune when it is better to use memory registration.
Link: https://lore.kernel.org/r/20191007135933.12483-4-leon@kernel.org
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
While MR uses live as the SRCU 'update', the MW case uses the xarray
directly, xa_erase() causes the MW to become inaccessible to the pagefault
thread.
Thus whenever a MW is removed from the xarray we must synchronize_srcu()
before freeing it.
This must be done before freeing the mkey as re-use of the mkey while the
pagefault thread is using the stale mkey is undesirable.
Add the missing synchronizes to MW and DEVX indirect mkey and delete the
bogus protection against double destroy in mlx5_core_destroy_mkey()
Fixes: 534fd7aac5 ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP")
Fixes: 6aec21f6a8 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191001153821.23621-7-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
live is used to signal to the pagefault thread that the MR is initialized
and ready for use. It should be after the umem is assigned and all other
setup is completed. This prevents races (at least) of the form:
CPU0 CPU1
mlx5_ib_alloc_implicit_mr()
implicit_mr_alloc()
live = 1
imr->umem = umem
num_pending_prefetch_inc()
if (live)
atomic_inc(num_pending_prefetch)
atomic_set(num_pending_prefetch,0) // Overwrites other thread's store
Further, live is being used with SRCU as the 'update' in an
acquire/release fashion, so it can not be read and written raw.
Move all live = 1's to after MR initialization is completed and use
smp_store_release/smp_load_acquire() for manipulating it.
Add a missing live = 0 when an implicit MR child is deleted, before
queuing work to do synchronize_srcu().
The barriers in update_odp_mr() were some broken attempt to create a
acquire/release, but were not even applied consistently and missed the
point, delete it as well.
Fixes: 6aec21f6a8 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191001153821.23621-6-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
During destroy setting live = 0 and then synchronize_srcu() prevents
num_pending_prefetch from incrementing, and also, ensures that all work
holding that count is queued on the WQ. Testing before causes races of the
form:
CPU0 CPU1
dereg_mr()
mlx5_ib_advise_mr_prefetch()
srcu_read_lock()
num_pending_prefetch_inc()
if (!live)
live = 0
atomic_read() == 0
// skip flush_workqueue()
atomic_inc()
queue_work();
srcu_read_unlock()
WARN_ON(atomic_read()) // Fails
Swap the order so that the synchronize_srcu() prevents this.
Fixes: a6bc3875f1 ("IB/mlx5: Protect against prefetch of invalid MR")
Link: https://lore.kernel.org/r/20191001153821.23621-5-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This fixes a race of the form:
CPU0 CPU1
mlx5_ib_invalidate_range() mlx5_ib_invalidate_range()
// This one actually makes npages == 0
ib_umem_odp_unmap_dma_pages()
if (npages == 0 && !dying)
// This one does nothing
ib_umem_odp_unmap_dma_pages()
if (npages == 0 && !dying)
dying = 1;
dying = 1;
schedule_work(&umem_odp->work);
// Double schedule of the same work
schedule_work(&umem_odp->work); // BOOM
npages and dying must be read and written under the umem_mutex lock.
Since whenever ib_umem_odp_unmap_dma_pages() is called mlx5 must also call
mlx5_ib_update_xlt, and both need to be done in the same locking region,
hoist the lock out of unmap.
This avoids an expensive double critical section in
mlx5_ib_invalidate_range().
Fixes: 81713d3788 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20191001153821.23621-4-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mlx5_ib_update_xlt() must be protected against parallel free of the MR it
is accessing, also it must be called single threaded while updating the
HW. Otherwise we can have races of the form:
CPU0 CPU1
mlx5_ib_update_xlt()
mlx5_odp_populate_klm()
odp_lookup() == NULL
pklm = ZAP
implicit_mr_get_data()
implicit_mr_alloc()
<update interval tree>
mlx5_ib_update_xlt
mlx5_odp_populate_klm()
odp_lookup() != NULL
pklm = VALID
mlx5_ib_post_send_wait()
mlx5_ib_post_send_wait() // Replaces VALID with ZAP
This can be solved by putting both the SRCU and the umem_mutex lock around
every call to mlx5_ib_update_xlt(). This ensures that the content of the
interval tree relavent to mlx5_odp_populate_klm() (ie mr->parent == mr)
will not change while it is running, and thus the posted WRs to update the
KLM will always reflect the correct information.
The race above will resolve by either having CPU1 wait till CPU0 completes
the ZAP or CPU0 will run after the add and instead store VALID.
The pagefault path adding children already holds the umem_mutex and SRCU,
so the only missed lock is during MR destruction.
Fixes: 81713d3788 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20191001153821.23621-3-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Pull RDMA subsystem updates from Jason Gunthorpe:
"This cycle mainly saw lots of bug fixes and clean up code across the
core code and several drivers, few new functional changes were made.
- Many cleanup and bug fixes for hns
- Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed,
bnxt_re, efa
- Share the query_port code between all the iWarp drivers
- General rework and cleanup of the ODP MR umem code to fit better
with the mmu notifier get/put scheme
- Support rdma netlink in non init_net name spaces
- mlx5 support for XRC devx and DC ODP"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA: Fix double-free in srq creation error flow
RDMA/efa: Fix incorrect error print
IB/mlx5: Free mpi in mp_slave mode
IB/mlx5: Use the original address for the page during free_pages
RDMA/bnxt_re: Fix spelling mistake "missin_resp" -> "missing_resp"
RDMA/hns: Package operations of rq inline buffer into separate functions
RDMA/hns: Optimize cmd init and mode selection for hip08
IB/hfi1: Define variables as unsigned long to fix KASAN warning
IB/{rdmavt, hfi1, qib}: Add a counter for credit waits
IB/hfi1: Add traces for TID RDMA READ
RDMA/siw: Relax from kmap_atomic() use in TX path
IB/iser: Support up to 16MB data transfer in a single command
RDMA/siw: Fix page address mapping in TX path
RDMA: Fix goto target to release the allocated memory
RDMA/usnic: Avoid overly large buffers on stack
RDMA/odp: Add missing cast for 32 bit
RDMA/hns: Use devm_platform_ioremap_resource() to simplify code
Documentation/infiniband: update name of some functions
RDMA/cma: Fix false error message
RDMA/hns: Fix wrong assignment of qp_access_flags
...
Pull hmm updates from Jason Gunthorpe:
"This is more cleanup and consolidation of the hmm APIs and the very
strongly related mmu_notifier interfaces. Many places across the tree
using these interfaces are touched in the process. Beyond that a
cleanup to the page walker API and a few memremap related changes
round out the series:
- General improvement of hmm_range_fault() and related APIs, more
documentation, bug fixes from testing, API simplification &
consolidation, and unused API removal
- Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE,
and make them internal kconfig selects
- Hoist a lot of code related to mmu notifier attachment out of
drivers by using a refcount get/put attachment idiom and remove the
convoluted mmu_notifier_unregister_no_release() and related APIs.
- General API improvement for the migrate_vma API and revision of its
only user in nouveau
- Annotate mmu_notifiers with lockdep and sleeping region debugging
Two series unrelated to HMM or mmu_notifiers came along due to
dependencies:
- Allow pagemap's memremap_pages family of APIs to work without
providing a struct device
- Make walk_page_range() and related use a constant structure for
function pointers"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (75 commits)
libnvdimm: Enable unit test infrastructure compile checks
mm, notifier: Catch sleeping/blocking for !blockable
kernel.h: Add non_block_start/end()
drm/radeon: guard against calling an unpaired radeon_mn_unregister()
csky: add missing brackets in a macro for tlb.h
pagewalk: use lockdep_assert_held for locking validation
pagewalk: separate function pointers from iterator data
mm: split out a new pagewalk.h header from mm.h
mm/mmu_notifiers: annotate with might_sleep()
mm/mmu_notifiers: prime lockdep
mm/mmu_notifiers: add a lockdep map for invalidate_range_start/end
mm/mmu_notifiers: remove the __mmu_notifier_invalidate_range_start/end exports
mm/hmm: hmm_range_fault() infinite loop
mm/hmm: hmm_range_fault() NULL pointer bug
mm/hmm: fix hmm_range_fault()'s handling of swapped out pages
mm/mmu_notifiers: remove unregister_no_release
RDMA/odp: remove ib_ucontext from ib_umem
RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'
RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
RDMA/mlx5: Use ib_umem_start instead of umem.address
...
The removal of 'buffer' in the patch below caused free_page() to use a
value that had been offset since the wqe pointer is adjusted while the
routine runs.
The current implementation of free_pages() rounds down to a pfn,
discarding the adjustment, but this is not the right way to use the
API. Preserve the initial value and use it for free_page().
Fixes: 0f51427bd0 ("RDMA/mlx5: Cleanup WQE page fault handler")
Link: https://lore.kernel.org/r/20190916064818.19823-2-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
To resolve dependencies in following patches
mlx5_ib.h conflict resolved by keeing both hunks
Linux 5.3-rc8
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add flow steering actions: modify header and packet reformat
to the fs_cmd shim layer. This allows each namespace to define
possibly different functionality for alloc/dealloc action commands.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Merge mlx5-next patches needed for upcoming mlx5 software steering.
1) Alex adds HW bits and definitions required for SW steering
2) Ariel moves device memory management to mlx5_core (From mlx5_ib)
3) Maor, Cleanups and fixups for eswitch mode and RoCE
4) Mark, Set only stag for match untagged packets
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Move the device memory allocation and deallocation commands
SW ICM memory to mlx5_core to expose this API for all
mlx5_core users.
This comes as preparation for supporting SW steering in kernel
where it will be required to allocate and register device
memory for direct rule insertion.
In addition, an API to register this device memory for future
remote access operations is introduced using the create_mkey
commands.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
mlx5 HW spec and bits updates:
1) Aya exposes IP-in-IP capability in mlx5_core.
2) Maxim exposes lag tx port affinity capabilities.
3) Moshe adds VNIC_ENV internal rq counter bits.
4) ODP capabilities for DC transport
Misc updates:
5) Saeed, two compiler warnings cleanups
6) Add XRQ legacy commands opcodes
7) Use refcount_t for refcount
8) fix a -Wstringop-truncation warning
Michael Guralnik says:
====================
The series adds support for on-demand paging for DC transport.
As DC is a mlx-only transport, the capabilities are exposed to the user
using DEVX objects and later on through mlx5dv_query_device.
====================
Based on the mlx5-next branch from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for
dependencies
* branch 'mlx5-odp-dc':
IB/mlx5: Add page fault handler for DC initiator WQE
IB/mlx5: Remove check of FW capabilities in ODP page fault handling
net/mlx5: Set ODP capabilities for DC transport to max
Currently user applications can only steer TCP/IP(NIC RX/RX) traffic.
This patch adds RDMA_RX as a new flow type to allow the user to insert
steering rules to control RDMA traffic.
Two destinations are supported(but not set at the same time): devx
flow table object and QP.
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190819113626.20284-4-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Jason Gunthorpe says:
====================
This is a collection of general cleanups for ODP to clarify some of the
flows around umem creation and use of the interval tree.
====================
The branch is based on v5.3-rc5 due to dependencies
* odp_fixes:
RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
RDMA/mlx5: Use ib_umem_start instead of umem.address
RDMA/core: Make invalidate_range a device operation
RDMA/odp: Use kvcalloc for the dma_list and page_list
RDMA/odp: Check for overflow when computing the umem_odp end
RDMA/odp: Provide ib_umem_odp_release() to undo the allocs
RDMA/odp: Split creating a umem_odp from ib_umem_get
RDMA/odp: Make the three ways to create a umem_odp clear
RMDA/odp: Consolidate umem_odp initialization
RDMA/odp: Make it clearer when a umem is an implicit ODP umem
RDMA/odp: Iterate over the whole rbtree directly
RDMA/odp: Use the common interval tree library instead of generic
RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
