Pull x86 CPU feature updates from Thomas Gleixner:
"Updates for x86 CPU features:
- Support for UMWAIT/UMONITOR, which allows to use MWAIT and MONITOR
instructions in user space to save power e.g. in HPC workloads
which spin wait on synchronization points.
The maximum time a MWAIT can halt in userspace is controlled by the
kernel and can be adjusted by the sysadmin.
- Speed up the MTRR handling code on CPUs which support cache
self-snooping correctly.
On those CPUs the wbinvd() invocations can be omitted which speeds
up the MTRR setup by a factor of 50.
- Support for the new x86 vendor Zhaoxin who develops processors
based on the VIA Centaur technology.
- Prevent 'cat /proc/cpuinfo' from affecting isolated NOHZ_FULL CPUs
by sending IPIs to retrieve the CPU frequency and use the cached
values instead.
- The addition and late revert of the FSGSBASE support. The revert
was required as it turned out that the code still has hard to
diagnose issues. Yet another engineering trainwreck...
- Small fixes, cleanups, improvements and the usual new Intel CPU
family/model addons"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
x86/fsgsbase: Revert FSGSBASE support
selftests/x86/fsgsbase: Fix some test case bugs
x86/entry/64: Fix and clean up paranoid_exit
x86/entry/64: Don't compile ignore_sysret if 32-bit emulation is enabled
selftests/x86: Test SYSCALL and SYSENTER manually with TF set
x86/mtrr: Skip cache flushes on CPUs with cache self-snooping
x86/cpu/intel: Clear cache self-snoop capability in CPUs with known errata
Documentation/ABI: Document umwait control sysfs interfaces
x86/umwait: Add sysfs interface to control umwait maximum time
x86/umwait: Add sysfs interface to control umwait C0.2 state
x86/umwait: Initialize umwait control values
x86/cpufeatures: Enumerate user wait instructions
x86/cpu: Disable frequency requests via aperfmperf IPI for nohz_full CPUs
x86/acpi/cstate: Add Zhaoxin processors support for cache flush policy in C3
ACPI, x86: Add Zhaoxin processors support for NONSTOP TSC
x86/cpu: Create Zhaoxin processors architecture support file
x86/cpu: Split Tremont based Atoms from the rest
Documentation/x86/64: Add documentation for GS/FS addressing mode
x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2
x86/cpu: Enable FSGSBASE on 64bit by default and add a chicken bit
...
The command line option `no387' is designed to disable the FPU
entirely. This only 'works' with CONFIG_MATH_EMULATION enabled.
But on 64bit this cannot work because user space expects SSE to work which
required basic FPU support. MATH_EMULATION does not help because SSE is not
emulated.
The command line option `nofxsr' should also be limited to 32bit because
FXSR is part of the required flags on 64bit so turning it off is not
possible.
Clearing X86_FEATURE_FPU without emulation enabled will not work anyway and
hang in fpu__init_system_early_generic() before the console is enabled.
Setting additioal dependencies, ensures that the CPU still boots on a
modern CPU. Otherwise, dropping FPU will leave FXSR enabled causing the
kernel to crash early in fpu__init_system_mxcsr().
With XSAVE support it will crash in fpu__init_cpu_xstate(). The problem is
that xsetbv() with XMM set and SSE cleared is not allowed. That means
XSAVE has to be disabled. The XSAVE support is disabled in
fpu__init_system_xstate_size_legacy() but it is too late. It can be
removed, it has been added in commit
1f999ab5a1 ("x86, xsave: Disable xsave in i387 emulation mode")
to use `no387' on a CPU with XSAVE support.
All this happens before console output.
After hat, the next possible crash is in RAID6 detect code because MMX
remained enabled. With a 3DNOW enabled config it will explode in memcpy()
for instance due to kernel_fpu_begin() but this is unconditionally enabled.
This is enough to boot a Debian Wheezy on a 32bit qemu "host" CPU which
supports everything up to XSAVES, AVX2 without 3DNOW. Later, Debian
increased the minimum requirements to i686 which means it does not boot
userland atleast due to CMOV.
After masking the additional features it still keeps SSE4A and 3DNOW*
enabled (if present on the host) but those are unused in the kernel.
Restrict `no387' and `nofxsr' otions to 32bit only. Add dependencies for
FPU, FXSR to additionaly mask CMOV, MMX, XSAVE if FXSR or FPU is cleared.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190703083247.57kjrmlxkai3vpw3@linutronix.de
Peter pointed out that the set/clear_bit32() variants are broken in various
aspects.
Replace them with open coded set/clear_bit() and type cast
cpu_info::x86_capability as it's done in all other places throughout x86.
Fixes: 0b00de857a ("x86/cpuid: Add generic table for CPUID dependencies")
Reported-by: Peter Ziljstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@linux.intel.com>
do_clear_cpu_cap() allocates a bitmap to keep track of disabled feature
dependencies. That bitmap is sized NCAPINTS * BITS_PER_INIT. The possible
'features' which can be handed in are larger than this, because after the
capabilities the bug 'feature' bits occupy another 32bit. Not really
obvious...
So clearing any of the misfeature bits, as 32bit does for the F00F bug,
accesses that bitmap out of bounds thereby corrupting the stack.
Size the bitmap proper and add a sanity check to catch accidental out of
bound access.
Fixes: 0b00de857a ("x86/cpuid: Add generic table for CPUID dependencies")
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20171018022023.GA12058@yexl-desktop
Some CPUID features depend on other features. Currently it's
possible to to clear dependent features, but not clear the base features,
which can cause various interesting problems.
This patch implements a generic table to describe dependencies
between CPUID features, to be used by all code that clears
CPUID.
Some subsystems (like XSAVE) had an own implementation of this,
but it's better to do it all in a single place for everyone.
Then clear_cpu_cap and setup_clear_cpu_cap always look up
this table and clear all dependencies too.
This is intended to be a practical table: only for features
that make sense to clear. If someone for example clears FPU,
or other features that are essentially part of the required
base feature set, not much is going to work. Handling
that is right now out of scope. We're only handling
features which can be usefully cleared.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jonathan McDowell <noodles@earth.li>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171013215645.23166-3-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
