Both registers allow to bind a new context, but NXTCTX will work on all
falcons, while legacy NEW_INSTBLK is reserved to PMU.
After setting NXTCTX we trigger a context switch by writing 0x090 and
0x0a4.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Enable the PMU firmware in gm20b, managed by secure boot.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
gm20b PMU firmware is driven by a msgqueue, so connect relevant PMU
hooks to their msgqueue counterparts.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The ACR firmware may return no error but fail nonetheless. Such cases
can be detected by verifying that the WPR region has been properly set
in FB. If this is not the case, this is an error, but the unload
firmware should still not be run.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
PMU support has been enabled for r352 ACR, but it must remain optional
if we want to preserve existing user-space that do not include it. Allow
ACR to be instanciated with a list of optional LS falcons, that will not
produce a fatal error if their firmware is not loaded. Also change the
secure boot bootstrap logic to be able to fall back to legacy behavior
if it turns out the boot falcon's LS firmware cannot be loaded.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Add the PMU bootloader generator and PMU LS ops that will enable proper
PMU operation if the PMU falcon is designated as managed.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Adapt secboot's behavior if a PMU firmware is present, in particular
the way LS falcons are reset. Without PMU firmware, secboot needs to be
performed again from scratch so all LS falcons are reset. With PMU
firmware, we can ask the PMU's ACR unit to reset a specific falcon
through a PMU message.
As we must preserve the old behavior to avoid breaking user-space, add a
few conditionals to the way falcons are reset.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Allow secboot to load a LS PMU firmware. LS PMU is one instance of
firmwares based on the message queue mechanism, which is also used for
other firmwares like SEC, so name its source file accordingly.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
NVIDIA-provided PMU firmware is controlled by a msgqueue. Add a member
to the PMU structure as well as the required cleanup code if this
feature is used.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Add support for the msgqueue firmware used to process PMU commands for
gm20b.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
A message queue firmware implements a specific protocol allowing the
host to send "commands" to a falcon, and the falcon to reply using
"messages". This patch implements the common part of this protocol and
defines the interface that the host can use.
Due to the way the firmware is developped internally at NVIDIA (where
kernel driver and firmware evolve in lockstep), firmwares taken at
different points in time can have frustratingly subtle differences that
must be taken into account. This code is architectured to make
implementing such differences as easy as possible.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Add the ability for LS firmwares to declare a post-run hook that is
invoked right after the HS firmware is executed. This allows them to
e.g. write some initialization data into the falcon's DMEM.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
As different firmare versions use different HS descriptor formats, we
need to abstract this part as well.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This structure does not need to be shared anymore.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This allows the bootloader descriptor generation code to not rely on
specialized ls_ucode_img structures, making it reusable in other
instances.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Offsets were not properly computed. This went unnoticed because we are
only using one app for now.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Using 32-bit integers would trim the WPR address if it is allocated above 4GB.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
A WPR region smaller than 256K will result in secure boot failure.
Adjust the minimal size.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The WPR address parameter of the ls_write_wpr hook was defined as a u32,
which will very likely overflow on boards with more than 4GB VRAM.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Check at contruction time that we have support for all the LS firmwares
asked by the caller.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Remove a leftover that became obsolete with the falcon interface.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
DMEM registers are replicated with a stride of 8 bytes.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The falcon library may be used concurrently, especially after the
introduction of the msgqueue interface. Make it safe to use it that way.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is not used currently, but is added for the sake of completeness.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Some PMU implementations (in particular the ones managed by secure
boot) may not have a reset() hook. Make sure we don't crash in that
case.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Make nvkm_secboot_falcon_name publicly visible as other subdevs will
need to use it for debug messages.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ideally we'd be able to keep these at a more obvious error level, as
they're a good indication of us doing something wrong.
However, NVIDIA's FECS/GPCCS firmware touches registers that trigger
priv ring faults, and we can't do anything to fix that ourselves due
to the need for them to be signed by NVIDIA.
This issue was reported a while back, but hasn't been fixed, so, for
now we will hide the messages to prevent spamming Optimus users with
messages whenever the NVIDIA GPU is powered off and on again.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Call qxl_add_monitors_config_modes() unconditionally. Do all sanity
checks in that function.
Fix sanity checks. monitors_config is the current monitor
configuration, whereas client_monitors_config is the configuration
requested by the spice client. So when filling the mode list, based on
the spice client request, we need to look at
client_monitors_config->count not monitors_config->count.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488363154-6889-5-git-send-email-kraxel@redhat.com
Try to read the client monitors config at driver load time, even without
explicit notification. So in case that info was filled before the driver
loaded and we've missed the notifications because of that the settings
will still be used.
With that place we now have to take care to properly handle a empty client
monitors config, so we don't trip over an uninitialized client monitors
config.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488363154-6889-4-git-send-email-kraxel@redhat.com
very old qxl hardware revisions (predating qxl ksm support by a few
years) supported a fixed list of video modes only. The list is still
provided by the virtual hardware, for backward compatibility reasons.
The qxl kms driver never ever looks at it, except for dumping it to
the kernel log at load time in case debug logging is enabled. Drop
that pointless code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488363154-6889-2-git-send-email-kraxel@redhat.com
First slice of drm-misc-next for 4.12:
Core/subsystem-wide:
- link status core patch from Manasi, for signalling link train fail
to userspace. I also had the i915 patch in here, but that had a
small buglet in our CI, so reverted.
- more debugfs_remove removal from Noralf, almost there now (Noralf
said he'll try to follow up with the stragglers).
- drm todo moved into kerneldoc, for better visibility (see
Documentation/gpu/todo.rst), lots of starter tasks in there.
- devm_ of helpers + use it in sti (from Ben Gaignard, acked by Rob
Herring)
- extended framebuffer fbdev support (for fbdev flipping), and vblank
wait ioctl fbdev support (Maxime Ripard)
- misc small things all over, as usual
- add vblank callbacks to drm_crtc_funcs, plus make lots of good use
of this to simplify drivers (Shawn Guo)
- new atomic iterator macros to unconfuse old vs. new state
Small drivers:
- vc4 improvements from Eric
- vc4 kerneldocs (Eric)!
- tons of improvements for dw-mipi-dsi in rockchip from John Keeping
and Chris Zhong.
- MAINTAINERS entries for drivers managed in drm-misc. It's not yet
official, still an experiment, but definitely not complete fail and
better to avoid confusion. We kinda screwed that up with drm-misc a
bit when we started committers last year.
- qxl atomic conversion (Gabriel Krisman)
- bunch of virtual driver polish (qxl, virgl, ...)
- misc tiny patches all over
This is the first time we've done the same merge-window blackout for
drm-misc as we've done for drm-intel for ages, hence why we have a
_lot_ of stuff queued already. But it's still only half of drm-intel
(room to grow!), and the drivers in drm-misc experiment seems to work
at least insofar as that you also get lots of driver updates here
alredy.
* tag 'drm-misc-next-2017-03-06' of git://anongit.freedesktop.org/git/drm-misc: (141 commits)
drm/vc4: Fix OOPSes from trying to cache a partially constructed BO.
drm/vc4: Fulfill user BO creation requests from the kernel BO cache.
Revert "drm/i915: Implement Link Rate fallback on Link training failure"
drm/fb-helper: implement ioctl FBIO_WAITFORVSYNC
drm: Update drm_fbdev_cma_init documentation
drm/rockchip/dsi: add dw-mipi power domain support
drm/rockchip/dsi: fix insufficient bandwidth of some panel
dt-bindings: add power domain node for dw-mipi-rockchip
drm/rockchip/dsi: remove mode_valid function
drm/rockchip/dsi: dw-mipi: correct the coding style
drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi
dt-bindings: add rk3399 support for dw-mipi-rockchip
drm/rockchip: dw-mipi-dsi: add reset control
drm/rockchip: dw-mipi-dsi: support non-burst modes
drm/rockchip: dw-mipi-dsi: defer probe if panel is not loaded
drm/rockchip: vop: test for P{H,V}SYNC
drm/rockchip: dw-mipi-dsi: use positive check for N{H, V}SYNC
drm/rockchip: dw-mipi-dsi: use specific poll helper
drm/rockchip: dw-mipi-dsi: improve PLL configuration
drm/rockchip: dw-mipi-dsi: properly configure PHY timing
...
Adds helpers for starting and stopping capture of frame CRCs through the
DPCD. When capture is on, a worker waits for vblanks and retrieves the
frame CRC to put it in the queue on the CRTC that is using the
eDP connector, so it's passed to userspace.
v2: Reuse drm_crtc_wait_one_vblank
Update locking, as drm_crtc_add_crc_entry now takes the lock
v3: Don't call wake_up_interruptible directly, that's now done in
drm_crtc_add_crc_entry.
v4: Style fixes (Sean Paul)
Reworked retry of CRC reads (Sean Paul)
Flush worker after stopping CRC generationa (Sean Paul)
v5: Move back to make the retry explicitly once
v6: Set and use the drm_crtc backpointer (Sean Paul)
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303133936.14964-3-tomeu.vizoso@collabora.com
Per PCI specification, Configuration Register has different types (RO,
RW, RW1C, Rsvd). For RO Register bits are read-only and cannot be
altered by software. For RW1C Register bits indicate status when read.
A Set bit indicates a status event which is Cleared by writing a 1b.
Writing a 0b to RW1C bits has no effect. Reserved Register is for future
implementations, and they are read-only and must return zero when read.
Current vGPU configuration write emulation just copy the value as it is.
So we haven't emulated RO, RW1C and Rsvd Registers correctly. This patch
is following the Spec to correct emulation logic. We add a function
vgpu_cfg_mem_write to wrap the access to vGPU configuration memory.
The write function uses a RW Register bitmap to avoid RO bits be
overwritten, and emulate RW1C behavior for the particular status Register.
v2:
new = src[i] --> new = src[i] & mask (zhenyu)
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Xiaoguang Chen <xiaoguang.chen@intel.com>
Cc: Zhiyuan Lv <zhiyuan.lv@intel.com>
Cc: Min He <min.he@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Currently i915 has a request replay mechanism which can make sure
the request can be replayed after a GPU reset. With this mechanism,
gvt should wait until the GVT request seqno passed before complete
the current workload. So that there should be a context switch interrupt
come before gvt free the workload. In this way, workload lifecylce
matches with the i915 request lifecycle. The workload can only be freed
after the request is completed.
v2: use gvt_dbg_sched instead of gvt_err to print when wait again
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
