Redo the fb rotation handling in order to:
- eliminate the NV12 special casing
- handle fb->offsets[] properly
- make the rotation handling easier for the plane code
To achieve these goals we reduce intel_rotation_info to only contain
(for each plane) the rotated view width,height,stride in tile units,
and the page offset into the object where the plane starts. Each plane
is handled exactly the same way, no special casing for NV12 or other
formats. We then store the computed rotation_info under
intel_framebuffer so that we don't have to recompute it again.
To handle fb->offsets[] we treat them as a linear offsets and convert
them to x/y offsets from the start of the relevant GTT mapping (either
normal or rotated). We store the x/y offsets under intel_framebuffer,
and for some extra convenience we also store the rotated pitch (ie.
tile aligned plane height). So for each plane we have the normal
x/y offsets, rotated x/y offsets, and the rotated pitch. The normal
pitch is available already in fb->pitches[].
While we're gathering up all that extra information, we can also easily
compute the storage requirements for the framebuffer, so that we can
check that the object is big enough to hold it.
When it comes time to deal with the plane source coordinates, we first
rotate the clipped src coordinates to match the relevant GTT view
orientation, then add to them the fb x/y offsets. Next we compute
the aligned surface page offset, and as a result we're left with some
residual x/y offsets. Finally, if required by the hardware, we convert
the remaining x/y offsets into a linear offset.
For gen2/3 we simply skip computing the final page offset, and just
convert the src+fb x/y offsets directly into a linear offset since
that's what the hardware wants.
After this all platforms, incluing SKL+, compute these things in exactly
the same way (excluding alignemnt differences).
v2: Use BIT(DRM_ROTATE_270) instead of ROTATE_270 when rotating
plane src coordinates
Drop some spurious changes that got left behind during
development
v3: Split out more changes to prep patches (Daniel)
s/intel_fb->plane[].foo.bar/intel_fb->foo[].bar/ for brevity
Rename intel_surf_gtt_offset to intel_fb_gtt_offset
Kill the pointless 'plane' parameter from intel_fb_gtt_offset()
v4: Fix alignment vs. alignment-1 when calling
_intel_compute_tile_offset() from intel_fill_fb_info()
Pass the pitch in tiles in
stad of pixels to intel_adjust_tile_offset() from intel_fill_fb_info()
Pass the full width/height of the rotated area to
drm_rect_rotate() for clarity
Use u32 for more offsets
v5: Preserve the upper_32_bits()/lower_32_bits() handling for the
fb ggtt offset (Sivakumar)
v6: Rebase due to drm_plane_state src/dst rects
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-2-git-send-email-ville.syrjala@linux.intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Some panels only accept bpc (bit per color) 6-bit.
But, the default bpc in mt8173 display data path is 8-bit.
If we didn't enable dithering function to convert bpc,
display cannot show the smooth grayscale image.
In mt8173, the dithering function in OD (OverDrive) and
GAMMA module, we have to config them with
connector->display_mode.bpc when CRTC initial.
1. Clear the default value at *_DITHER_5 and *_DITHER_7 register.
2. Calculate the LSB_ERR_SHIFT bits and ADD_LSHIFT bits two values.
i.e. Input bpc of OD is 10 bits, we assume the bpc of panel is 6-bit,
so, we need to set 4-bit to LSB_ERR_SHIFT and ADD_LSHIFT bits respectively.
3. Then, set the OD or GAMMA to dithering mode depends on path-1 or path-2.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add gamma set function to correct brightness values.
It applies arbitrary mapping curve to compensate the
incorrect transfer function of the panel.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
ARM SMCCC is only set for ARMv7 and ARMv8 CPUs, but we currently
allow the driver to be build for older architecture levels as
well, which results in a link failure:
drivers/gpu/built-in.o: In function `mtk_hdmi_hw_make_reg_writable':
:(.text+0x1e737c): undefined reference to `arm_smccc_smc'
This adds a Kconfig dependency. The patch applies on my two
previous fixes that are not yet applied, so please apply all
three to get randconfig builds to work correctly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 8f83f26891 ("drm/mediatek: Add HDMI support")
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The mediatek DRM driver can be configured for compile testing with
CONFIG_OF disabled, but then fails to link:
drivers/gpu/built-in.o: In function `mtk_drm_bind':
analogix_dp_reg.c:(.text+0x52888): undefined reference to `of_find_device_by_node'
analogix_dp_reg.c:(.text+0x52930): undefined reference to `of_find_device_by_node'
This adds an explicit Kconfig dependency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.kernel.org/patch/9120871/
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
On kernel builds without COMMON_CLK, the newly added mediatek drm
driver fails to build:
drivers/gpu/drm/mediatek/mtk_mipi_tx.c:130:16: error: field 'pll_hw' has incomplete type
struct clk_hw pll_hw;
^~~~~~
In file included from ../include/linux/clk.h:16:0,
from ../drivers/gpu/drm/mediatek/mtk_mipi_tx.c:14:
drivers/gpu/drm/mediatek/mtk_mipi_tx.c: In function 'mtk_mipi_tx_from_clk_hw':
include/linux/kernel.h:831:48: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
const typeof( ((type *)0)->member ) *__mptr = (ptr); \
^
/drivers/gpu/drm/mediatek/mtk_mipi_tx.c:136:9: note: in expansion of macro 'container_of'
return container_of(hw, struct mtk_mipi_tx, pll_hw);
^~~~~~~~~~~~
drivers/gpu/drm/mediatek/mtk_mipi_tx.c: At top level:
drivers/gpu/drm/mediatek/mtk_mipi_tx.c:302:21: error: variable 'mtk_mipi_tx_pll_ops' has initializer but incomplete type
static const struct clk_ops mtk_mipi_tx_pll_ops = {
This adds the required Kconfig dependency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.kernel.org/patch/9069061/
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
In order to correct brightness values, we have
to support gamma funciton on MT8173. In MT8173,
we have two engines for supporting gamma function:
AAL and GAMMA. This patch add some GAMMA engine
basic function, include config, start and stop
function.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
In order to correct brightness values, we have
to support gamma funciton on MT8173. In MT8173,
we have two engines for supporting gamma function:
AAL and GAMMA. This patch add some AAL engine
basic function, include config, start and stop
function.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This function would call drm_modeset_lock_all, while the suspend/resume
functions already have their own locking. Fix this by factoring out
__intel_display_resume, and calling the atomic helpers for duplicating
atomic state and disabling all crtc's during suspend.
Changes since v1:
- Deal with -EDEADLK right after lock_all and clean up calls
to hw readout.
- Always take all modeset locks so updates during gpu reset are blocked.
Changes since v2:
- Fix deadlock in intel_update_primary_planes.
- Move WARN_ON(EDEADLK) to __intel_display_resume.
- pctx -> ctx
- only call __intel_display_resume on success in intel_display_resume.
Changes since v3:
- Rebase on top of dev_priv -> dev change.
- Use drm_modeset_lock_all_ctx instead of drm_modeset_lock_all.
Changes since v4 [by vsyrjala]:
- Deal with skip_intermediate_wm
- Update comment w.r.t. mode_config.mutex vs. ->detect()
- Rebase due to INTEL_GEN() etc.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: e2c8b8701e ("drm/i915: Use atomic helpers for suspend, v2.")
Cc: stable@vger.kernel.org
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470428910-12125-2-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit 7397489399)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Erratum SKL075: Display Flicker May Occur When Both VT-d And FBC Are Enabled
"Display flickering may occur when both FBC (Frame Buffer Compression)
and VT - d (Intel® Virtualization Technology for Directed I/O) are enabled
and in use by the display controller."
Ville found the w/a name in the database:
WaFbcTurnOffFbcWhenHyperVisorIsUsed:skl,bxt and also dug out that it
affects Broxton.
v2: Log when the quirk is applied.
v3: Ensure i915.enable_fbc is false when !HAS_FBC()
v4: Fix function name after rebase
v5: Add Broxton to the workaround
Note for backporting to stable, we need to add
#define mkwrite_device_info(ptr) \
((struct intel_device_info *)INTEL_INFO(ptr))
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/1470296633-20388-1-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit 36dbc4d769)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
These flags allow userspace to explicitly specify the target vertical
blank period when a flip should take effect.
v2:
* Add new struct drm_mode_crtc_page_flip_target instead of modifying
struct drm_mode_crtc_page_flip, to make sure all existing userspace
code keeps compiling (Daniel Vetter)
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the previous change, it's safe to let page flips take effect
anytime during a vertical blank period.
This can avoid delaying a flip by a frame in some cases where we get to
radeon_flip_work_func -> adev->mode_info.funcs->page_flip during a
vertical blank period.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now we can program a flip during a vertical blank period, if it's the
one targeted by the flip (or a later one). This allows simplifying
radeon_flip_work_func considerably.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the previous change, it's safe to let page flips take effect
anytime during a vertical blank period.
This can avoid delaying a flip by a frame in some cases where we get to
amdgpu_flip_work_func -> adev->mode_info.funcs->page_flip during a
vertical blank period.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now we can program a flip during a vertical blank period, if it's the
one targeted by the flip (or a later one). This allows simplifying
amdgpu_flip_work_func considerably.
agd: update dce_virtual.c as well.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mostly the same as the existing page_flip hook, but takes an additional
parameter specifying the target vertical blank period when the flip
should take effect.
v2:
* Add curly braces around else statement corresponding to an if block
with curly braces (Alex Deucher)
* Call drm_crtc_vblank_put in the error case (Daniel Vetter)
* Clarify entry point documentation comment (Daniel Vetter)
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can add the fragment params before we split the update for the page tables.
That should save a few CPU cycles for larger updates.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces a new macro WREG32_FIELD which is used
to write to a register with a new value in a field. It's designed
to replace the pattern:
tmp = RREG32(mmFoo);
tmp &= ~REG__FIELD_MASK;
tmp |= new_value << REG__FIELD__SHIFT;
WREG32(mmFoo, tmp)
with:
WREG32_FIELD(Foo, FIELD, new_value);
Unlike WREG32_P() it understands offsets/masks and doesn't
require the caller to shift the value (or mask properly).
It's applied where suitable in the gfx_v8_0.c driver to start
with.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display feature, as there may be multiple GPUs,
for user could choose whiche GPU need to enable this feature, change
the type of virtual_display from int to char*. The variable will be set
like this virtual_display="xxxx:xx:xx.x;xxxx:xx:xx.x;".
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Atm, we apply this workaround somewhat inconsistently at the following
points: driver loading, LVDS init, eDP PPS init, system resume. As this
workaround also affects registers other than PPS (timing, PLL) a more
consistent way is to apply it early after the PPS HW context is known to
be lost: driver loading, system resume and on VLV/CHV/BXT when turning
on power domains.
This is needed by the next patch that removes saving/restoring of the
PP_CONTROL register.
This also removes the incorrect programming of the workaround on HSW+
PCH platforms which don't have the register locking mechanism.
v2: (Ville)
- Don't apply the workaround on BXT.
- Simplify platform checks using HAS_DDI().
v3:
- Move the call of intel_pps_unlock_regs_wa() to the more
logical vlv_display_power_well_init() (also fixing CHV) (Ville).
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470827254-21954-5-git-send-email-imre.deak@intel.com
