Merge "Samsung DeviceTree update for v4.9" from Krzysztof Kozlowski:
1. Set chosen serial bitrate which allows proper serial output when
bootloader does pass all the data in command line.
2. Cleanup.
* tag 'samsung-dt-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Use 'hpd-gpios' instead of 'hpd-gpio'
ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4
Merge "Device Tree additions for LPC18xx platform" from Joachim Eastwood:
Small fix for the compatible string for the NXP SE97 I2C chip on the
Hitex Eval board from Guenter and a couple of additional DT properties
for the DWMAC that is need for correct operation.
* tag 'lpc18xx_dts_for_4.9' of https://github.com/manabian/linux-lpc:
ARM: dts: lpc18xx: configure dwmac properly
ARM: dts: lpc4350-hitex-eval: fix binding for SE97 i2c device
Use the cache settings that were determined to give best performance
on artpec-6 typical workloads.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In particular:
arch/x86/ras/mce_amd_inj.c: In function ‘prepare_msrs’:
arch/x86/ras/mce_amd_inj.c:249:13: warning: declaration of ‘i_mce’ shadows a global declaration [-Wshadow]
struct mce i_mce = *(struct mce *)info;
^~~~~
arch/x86/ras/mce_amd_inj.c: In function ‘init_mce_inject’:
arch/x86/ras/mce_amd_inj.c:453:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (i = 0; i < ARRAY_SIZE(dfs_fls); i++) {
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20160912075941.24699-16-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The MCA_SYND and MCA_IPID registers contain valuable information and
should be included in MCE output. The MCA_SYND register contains
syndrome and other error information, and the MCA_IPID register will
uniquely identify the MCA bank's type without having to rely on system
software.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1472680624-34221-2-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The MCA_IPID register uniquely identifies a bank's type and instance
on Scalable MCA systems. We should save the value of this register
in struct mce along with the other relevant error information. This
ensures that we can decode errors without relying on system software to
correlate the bank to the type.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1472680624-34221-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Scalable MCA defines a number of IP types. An MCA bank on an SMCA
system is defined as one of these IP types. A bank's type is uniquely
identified by the combination of the HWID and MCATYPE values read from
its MCA_IPID register.
Add the required tables in order to be able to lookup error descriptions
based on a bank's type and the error's extended error code.
[ bp: Align comments, simplify a bit. ]
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1472741832-1690-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Scalable MCA systems allow non-core MCA banks to only be accessible by
certain CPUs. The MSRs for these banks are Read-as-Zero on other CPUs.
During allocate_threshold_blocks(), get_block_address() can be scheduled
on CPUs other than the one allocating the block. This causes the MSRs to
be read on the wrong CPU and results in incorrect behavior.
Add a @cpu parameter to get_block_address() and pass this in to ensure
that the MSRs are only read on the CPU that is allocating the block.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1472673994-12235-2-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Syndrome information is no longer contained in MCA_STATUS for SMCA
systems but in a new register - MCA_SYND.
Add a synd field to struct mce to hold MCA_SYND register value. Add it
to the end of struct mce to maintain compatibility with old versions of
mcelog. Also, add it to the respective tracepoint.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1467633035-32080-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Paul Mackerras writes:
The highlights are:
* Reduced latency for interrupts from PCI pass-through devices, from
Suresh Warrier and me.
* Halt-polling implementation from Suraj Jitindar Singh.
* 64-bit VCPU statistics, also from Suraj.
* Various other minor fixes and improvements.
Commit c1a0e9bc88 ("MIPS: Allow compact branch policy to be changed")
added Kconfig entries allowing for the compact branch policy used by the
compiler for MIPSr6 kernels to be specified. This can be useful for
debugging, particularly in systems where compact branches have recently
been introduced.
Unfortunately mainline gcc 5.x supports MIPSr6 but not the
-mcompact-branches compiler flag, leading to MIPSr6 kernels failing to
build with gcc 5.x with errors such as:
mipsel-linux-gnu-gcc: error: unrecognized command line option '-mcompact-branches=optimal'
make[2]: *** [kernel/bounds.s] Error 1
Fixing this by hiding the Kconfig entry behind another seems to be more
hassle than it's worth, as MIPSr6 & compact branches have been around
for a while now and if policy does need to be set for debug it can be
done easily enough with KCFLAGS. Therefore remove the compact branch
policy Kconfig entries & their handling in the Makefile.
This reverts commit c1a0e9bc88 ("MIPS: Allow compact branch policy to
be changed").
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: c1a0e9bc88 ("MIPS: Allow compact branch policy to be changed")
Cc: stable <stable@vger.kernel.org> # v4.4+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14241/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The alignment of MIPS MAAR region addresses isn't quite right.
- It rounds an already 64 KiB aligned start address up to the next
64 KiB boundary, e.g. 0x80000000 is rounded up to 0x80010000.
- It assumes the end address is already on a 64 KiB boundary and doesn't
round it down. Should that not be the case it will hit the second
BUG_ON() in write_maar_pair().
Both cases are addressed by rounding up and down to 64 KiB boundaries in
the more traditional way of adding 0xffff (for rounding up) and masking
off the low 16 bits.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13858/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Memory regions added with add_memory_region() at the top of the physical
address space will have their end address overflow to 0. This causes
them to be rejected as invalid, and would cause various other issues
later on.
This causes issues on Malta and Boston platforms when wanting to use all
2GB of RAM on a 32-bit kernel, either via highmem (using physical
addresses 0x90000000..0xFFFFFFFF), or with the Malta Enhanced Virtual
Addressing (EVA) layout which exposes the whole 0x80000000..0xFFFFFFFF
physical address range to kernel mode at 0x00000000..0x7FFFFFFF.
Due to the abundance of these non-overflow assumptions and the fact that
memblock already avoids the arithmetic overflow by limiting the size of
new memory regions without the arch code knowing it (in particular
mem_init_free_highmem() will trigger a page dump due to nonzero mapcount
on the last page), it is simpler and safer to just limit the size of the
region in a similar way to memblock but at the arch level to allow most
of the RAM to be used without arithmetic overflows.
Therefore we detect this case specifically and reduce the size of the
region slightly to avoid the arithmetic overflows and cause the last
page to be ignored.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13857/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When a uprobe-replacement breakpoint instruction is handled, a notifier
is called with DIE_UPROBE argument, but a corresponding exception notify
handler for MIPS attempts to handle DIE_BREAK instead. As a result
the breakpoint instruction isn't handled by the uprobe code and the probed
application terminates with SIGTRAP.
Fix this by changing arch_uprobe_exception_notify code to handle
DIE_UPROBE as a pre-singlestep condition instead of DIE_BREAK.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13884/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The AES-CTR glue code avoids calling into the blkcipher API for the
tail portion of the walk, by comparing the remainder of walk.nbytes
modulo AES_BLOCK_SIZE with the residual nbytes, and jumping straight
into the tail processing block if they are equal. This tail processing
block checks whether nbytes != 0, and does nothing otherwise.
However, in case of an allocation failure in the blkcipher layer, we
may enter this code with walk.nbytes == 0, while nbytes > 0. In this
case, we should not dereference the source and destination pointers,
since they may be NULL. So instead of checking for nbytes != 0, check
for (walk.nbytes % AES_BLOCK_SIZE) != 0, which implies the former in
non-error conditions.
Fixes: 49788fe2a1 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions")
Cc: stable@vger.kernel.org
Reported-by: xiakaixu <xiakaixu@huawei.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The AES-CTR glue code avoids calling into the blkcipher API for the
tail portion of the walk, by comparing the remainder of walk.nbytes
modulo AES_BLOCK_SIZE with the residual nbytes, and jumping straight
into the tail processing block if they are equal. This tail processing
block checks whether nbytes != 0, and does nothing otherwise.
However, in case of an allocation failure in the blkcipher layer, we
may enter this code with walk.nbytes == 0, while nbytes > 0. In this
case, we should not dereference the source and destination pointers,
since they may be NULL. So instead of checking for nbytes != 0, check
for (walk.nbytes % AES_BLOCK_SIZE) != 0, which implies the former in
non-error conditions.
Fixes: 86464859cc ("crypto: arm - AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions")
Cc: stable@vger.kernel.org
Reported-by: xiakaixu <xiakaixu@huawei.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Normally, when MSR[VSX/VR/SPE] bits == 1, the used_vsr/used_vr/used_spe
bit have already been set. However when loading a signal frame from user
space we need to explicitly set used_vsr/used_vr/used_spe to make them
consistent with the MSR bits from the signal frame.
For example, CRIU application, who utilizes sigreturn to restore
checkpointed process, will lead to the case where MSR[VSX] bit is active
in signal frame, but used_vsr bit is not set in the kernel. (the same
applies to VR/SPE).
This patch fixes this by always setting used_* bit when MSR related bits
are active in signal frame and we are doing sigreturn.
Based on a proposal by Benh.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
[mpe: Massage change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The ckpt_regs usage in gpr32_set_common/gpr32_get_common() will lead to
following cppcheck error at ifndef CONFIG_PPC_TRANSACTIONAL_MEM case:
[arch/powerpc/kernel/ptrace.c:2062]:
(error) Uninitialized variable: ckpt_regs
[arch/powerpc/kernel/ptrace.c:2130]:
(error) Uninitialized variable: ckpt_regs
The problem is due to gpr32_set_common() used ckpt_regs variable which
only makes sense at #ifdef CONFIG_PPC_TRANSACTIONAL_MEM.
This patch fix this issue by passing in "regs" parameter instead.
Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The message is missing a \n, add it. Switch to pr_warn(), it's shorter
and less ugly.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 DD1 requires pte to be marked invalid (V=0) before updating
it with the new value. This makes this distinction for the different
revisions.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 DD1 uses RTS - 28 for the RTS value but other revisions use
RTS - 31. This makes this distinction for the different revisions
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The of_node for the SB600 (io-bridge) has its device_type set to
'io-bridge' Set it to 'isa' so that it can be found by
isa_bridge_find_early() instead of using patches in the kernel.
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The device tree on the Nemo passes all of the i8259 interrupts with
numbers between 212 and 222, and points their interrupt-parent property
to the pasemi-opic, requiring custom patches to the kernel. Fix the
values so that they can be controlled by the generic ppc i8259 code.
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
[mpe: Rework deeply nested if and boundary checks]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add config option for the Nemo motherboard used in the Amigaone X1000.
This is a custom PASemi board with an AMD SB600 southbridge, and needs
some patches to it device tree. This option will be used to build these
into the kernel
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Trivial fix to spelling mistake in dev_warn message and remove
extraneous trailing whitespace at end of the message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 2578bfae84 ("[POWERPC] Create and use CONFIG_WORD_SIZE") added
CONFIG_WORD_SIZE, and suggests that other arches were going to do
likewise.
But that never happened, powerpc is the only architecture which uses it.
So switch to using a simple make variable, BITS, like x86, sh, sparc and
tile. It is also easier to spell and simpler, avoiding any confusion
about whether it's defined due to ordering of make vs kconfig.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some of the rules in the boot Makefile use @ to hide the command, this
means "make V=1" doesn't show them, which is confusing.
So use the Kbuild standard $(Q) which means KBUILD_VERBOSE=1 or V=1 will
work as expected.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In fact it makes no sense at all to have this defined on little endian
builds. Since we disabled the 32-bit VDSO on little endian, we don't
build any 32-bit code when building a little endian kernel.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The LOAD_HANDLER macro requires that you have previously loaded "reg"
with PACAKBASE. Although that gives callers flexibility to get PACAKBASE
in some interesting way, none of the callers actually do that. So fold
the load of PACAKBASE into the macro, making it simpler for callers to
use correctly.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The comment for LOAD_HANDLER() was wrong. The part about kdump has not
been true since 1f6a93e4c3 ("powerpc: Make it possible to move the
interrupt handlers away from the kernel").
Describe how it currently works, and combine the two separate comments
into one.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, if userspace or the kernel accesses a completely bogus address,
for example with any of bits 46-59 set, we first take an SLB miss interrupt,
install a corresponding SLB entry with VSID 0, retry the instruction, then
take a DSI/ISI interrupt because there is no HPT entry mapping the address.
However, by the time of the second interrupt, the Come-From Address Register
(CFAR) has been overwritten by the rfid instruction at the end of the SLB
miss interrupt handler. Since bogus accesses can often be caused by a
function return after the stack has been overwritten, the CFAR value would
be very useful as it could indicate which function it was whose return had
led to the bogus address.
This patch adds code to create a full exception frame in the SLB miss handler
in the case of a bogus address, rather than inserting an SLB entry with a
zero VSID field. Then we call a new slb_miss_bad_addr() function in C code,
which delivers a signal for a user access or creates an oops for a kernel
access. In the latter case the oops message will show the CFAR value at the
time of the access.
In the case of the radix MMU, a segment miss interrupt indicates an access
outside the ranges mapped by the page tables. Previously this was handled
by the code for an unrecoverable SLB miss (one with MSR[RI] = 0), which is
not really correct. With this patch, we now handle these interrupts with
slb_miss_bad_addr(), which is much more consistent.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In commit 31cdd0c39c ("powerpc/xmon: Fix SPR read/write commands and
add command to dump SPRs") I added two uses of the "ld" instruction in
spr_access.S. "ld" is a 64-bit instruction, so shouldn't be used on
32-bit CPUs.
Replace it with PPC_LL which is a macro that gives us either "ld" or
"lwz" depending on whether we're 64 or 32-bit.
Fixes: 31cdd0c39c ("powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs")
Cc: stable@vger.kernel.org # v4.7+
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Another set of things that are only called from assembler and so need
prototypes to keep sparse happy.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Firmware Assisted Dump is a facility to dump kernel core with assistance
from firmware. As part of this process the kernel ELF ABI version is
stored in the core file.
Currently fadump.h defines this to 0 if it is not already defined. This
clashes with a define in elf.h which sets it based on the current task -
not based on the kernel's ELF ABI version.
Use the compiler-provided #define _CALL_ELF which tells us the ELF ABI
version of the kernel to set e_flags, this matches what binutils does.
Remove the definition in fadump.h, which becomes unused.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
