Analogix_dp driver acquires all its resources in the ->bind() callback,
what is a bit against the component driver based approach, where the
driver initialization is split into a probe(), where all resources are
gathered, and a bind(), where all objects are created and a compound
driver is initialized.
Extract all the resource related operations to analogix_dp_probe() and
analogix_dp_remove(), then call them before/after registration of the
device components from the main Exynos DP and Rockchip DP drivers. Also
move the plat_data initialization to the probe() to make it available for
the analogix_dp_probe() function.
This fixes the multiple calls to the bind() of the DRM compound driver
when the DP PHY driver is not yet loaded/probed:
[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops [exynosdrm])
exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops [exynosdrm])
exynos-dp 145b0000.dp-controller: no DP phy configured
exynos-drm exynos-drm: failed to bind 145b0000.dp-controller (ops exynos_dp_ops [exynosdrm]): -517
exynos-drm exynos-drm: master bind failed: -517
...
[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 145b0000.dp-controller (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm])
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Console: switching to colour frame buffer device 170x48
exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device
[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1
...
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310103427.26048-1-m.szyprowski@samsung.com
(cherry picked from commit 83a196773b)
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
drm_fb_helper_{add,remove}_one_connector() and
drm_fb_helper_single_add_all_connectors() are dummy functions now
and serve no purpose. Hence remove their calls.
This is the preparatory step for removing the
drm_fb_helper_{add,remove}_one_connector() functions from
drm_fb_helper.h
This removal is done using below sementic patch and unused variable
compilation warnings are fixed manually.
@@
@@
- drm_fb_helper_single_add_all_connectors(...);
@@
expression e1;
statement S;
@@
- e1 = drm_fb_helper_single_add_all_connectors(...);
- S
@@
@@
- drm_fb_helper_add_one_connector(...);
@@
@@
- drm_fb_helper_remove_one_connector(...);
Changes since v1:
* Squashed warning fixes into the patch that introduced the
warnings (into 5/7) (Laurent, Emil, Lyude)
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-6-pankaj.laxminarayan.bharadiya@intel.com
Current code tries to store the link rate (in bps, which is a big
number) in a u8, which surely overflow. Then it's converted back to
bandwidth code (which is thus 0) and written to the chip.
The code sometimes works because the chip will automatically fallback to
the lowest possible DP link rate (1.62Gbps) when get the invalid value.
However, on the eDP panel of Olimex TERES-I, which wants 2.7Gbps link,
it failed.
As we had already read the link bandwidth as bandwidth code in earlier
code (to check whether it is supported), use it when setting bandwidth,
instead of converting it to link rate and then converting back.
Fixes: e1cff82c10 ("drm/bridge: fix anx6345 compilation for v5.5")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Torsten Duwe <duwe@suse.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Torsten Duwe <duwe@lst.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221165127.813325-1-icenowy@aosc.io
Most bridge drivers create a DRM connector to model the connector at the
output of the bridge. This model is historical and has worked pretty
well so far, but causes several issues:
- It prevents supporting more complex display pipelines where DRM
connector operations are split over multiple components. For instance a
pipeline with a bridge connected to the DDC signals to read EDID data,
and another one connected to the HPD signal to detect connection and
disconnection, will not be possible to support through this model.
- It requires every bridge driver to implement similar connector
handling code, resulting in code duplication.
- It assumes that a bridge will either be wired to a connector or to
another bridge, but doesn't support bridges that can be used in both
positions very well (although there is some ad-hoc support for this in
the analogix_dp bridge driver).
In order to solve these issues, ownership of the connector should be
moved to the display controller driver (where it can be implemented
using helpers provided by the core).
Extend the bridge API to allow disabling connector creation in bridge
drivers as a first step towards the new model. The new flags argument to
the bridge .attach() operation allows instructing the bridge driver to
skip creating a connector. Unconditionally set the new flags argument to
0 for now to keep the existing behaviour, and modify all existing bridge
drivers to return an error when connector creation is not requested as
they don't support this feature yet.
The change is based on the following semantic patch, with manual review
and edits.
@ rule1 @
identifier funcs;
identifier fn;
@@
struct drm_bridge_funcs funcs = {
...,
.attach = fn
};
@ depends on rule1 @
identifier rule1.fn;
identifier bridge;
statement S, S1;
@@
int fn(
struct drm_bridge *bridge
+ , enum drm_bridge_attach_flags flags
)
{
... when != S
+ if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
+ DRM_ERROR("Fix bridge driver to make connector optional!");
+ return -EINVAL;
+ }
+
S1
...
}
@ depends on rule1 @
identifier rule1.fn;
identifier bridge, flags;
expression E1, E2, E3;
@@
int fn(
struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags
) {
<...
drm_bridge_attach(E1, E2, E3
+ , flags
)
...>
}
@@
expression E1, E2, E3;
@@
drm_bridge_attach(E1, E2, E3
+ , 0
)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
Propagate bus format/flags so that the previous bridge element in the
chain knows which input format the panel bridge expects.
v11:
* Fix a typo in the subject
* Update the commit message so it's readable by itself
v10:
* Add changelog to the commit message
v8 -> v9:
* No changes
v7:
* Set atomic state hooks explicitly
v4 -> v6:
* Not part of the series
v3:
* Adjust things to match the new bus-format negotiation approach
* Use drm_atomic_helper_bridge_propagate_bus_fmt
* Don't implement ->atomic_check() (the core now takes care of bus
flags propagation)
v2:
* Adjust things to match the new bus-format negotiation approach
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-11-boris.brezillon@collabora.com
If we fail training at a lower DP link rate let's now keep trying
until we run out of rates to try. Basically the algorithm here is to
start at the link rate that is the theoretical minimum and then slowly
bump up until we run out of rates or hit the max rate of the sink. We
query the sink using a DPCD read.
This is, in fact, important in practice. Specifically at least one
panel hooked up to the bridge (AUO B116XAK01) had a theoretical min
rate more than 1.62 GHz (if run at 24 bpp) and fails to train at the
next rate (2.16 GHz). It would train at 2.7 GHz, though.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218143416.v3.8.I251add713bc5c97225200894ab110ea9183434fd@changeid
The current bridge driver always forced us to use 24 bits per pixel
over the DP link. This is a waste if you are hooked up to a panel
that only supports 6 bits per color or fewer, since in that case you
can run at 18 bits per pixel and thus end up at a lower DP clock rate.
Let's support this.
While at it, let's clean up the math in the function to avoid rounding
errors (and round in the correct direction when we have to round).
Numbers are sufficiently small (because mode->clock is in kHz) that we
don't need to worry about integer overflow.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[narmstrong: s/ran/can/]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218143416.v3.6.Iaf8d698f4e5253d658ae283d2fd07268076a7c27@changeid
The ti-sn65dsi86 is a bridge from MIPI to DP and thus has two links:
the MIPI link and the DP link. The two links do not need to have the
same format or number of lanes. Stop using MIPI variables when
talking about the DP link.
This has zero functional change because:
* currently we are hardcoding the MIPI link as unpacked RGB888 which
requires 24 bits and currently we are not changing the DP link rate
from the bridge's default of 8 bits per pixel.
* currently we are hardcoding both the MIPI and DP as being 4 lanes.
This is all in prep for fixing some of the above.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218143416.v3.3.Ia6e05f4961adb0d4a0d32ba769dd7781ee8db431@changeid
Link training fails with:
Link training timeout waiting for LT_LOOPDONE!
main link enable error: -110
This is caused by too tight timeouts, which were changed recently in
aa92213f38 ("drm/bridge: tc358767: Simplify polling in tc_link_training()").
With a quick glance, the commit does not change the timeouts. However,
the method of delaying/sleeping is different, and as the timeout in the
previous implementation was not explicit, the new version in practice
has much tighter timeout.
The same change was made to other parts in the driver, but the link
training timeout is the only one I have seen causing issues.
Nevertheless, 1 us sleep is not very sane, and the timeouts look pretty
tight, so lets fix all the timeouts.
One exception was the aux busy poll, where the poll sleep was much
longer than necessary (or optimal).
I measured the times on my setup, and now the sleep times are set to
such values that they result in multiple loops, but not too many (say,
5-10 loops). The timeouts were all increased to 100ms, which should be
more than enough for all of these, but in case of bad errors, shouldn't
stop the driver as multi-second timeouts could do.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fixes: aa92213f38 ("drm/bridge: tc358767: Simplify polling in tc_link_training()")
Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191209082707.24531-1-tomi.valkeinen@ti.com
