After reworking U-boot args handling code and adding paranoid
arguments check we can eliminate CONFIG_ARC_UBOOT_SUPPORT and
enable uboot support unconditionally.
For JTAG case we can assume that core registers will come up
reset value of 0 or in worst case we rely on user passing
'-on=clear_regs' to Metaware debugger.
Cc: stable@vger.kernel.org
Tested-by: Corentin LABBE <clabbe@baylibre.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Handle U-boot arguments paranoidly:
* don't allow to pass unknown tag.
* try to use external device tree blob only if corresponding tag
(TAG_DTB) is set.
* don't check uboot_tag if kernel build with no ARC_UBOOT_SUPPORT.
NOTE:
If U-boot args are invalid we skip them and try to use embedded device
tree blob. We can't panic on invalid U-boot args as we really pass
invalid args due to bug in U-boot code.
This happens if we don't provide external DTB to U-boot and
don't set 'bootargs' U-boot environment variable (which is default
case at least for HSDK board) In that case we will pass
{r0 = 1 (bootargs in r2); r1 = 0; r2 = 0;} to linux which is invalid.
While I'm at it refactor U-boot arguments handling code.
Cc: stable@vger.kernel.org
Tested-by: Corentin LABBE <clabbe@baylibre.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
There's a hardware bug which affects the HSDK platform, triggered by
micro-ops for auto-saving regfile on taken interrupt. The workaround is
to inhibit autosave.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
ARCv2 optimized memcpy uses PREFETCHW instruction for prefetching the
next cache line but doesn't ensure that the line is not past the end of
the buffer. PRETECHW changes the line ownership and marks it dirty,
which can cause data corruption if this area is used for DMA IO.
Fix the issue by avoiding the PREFETCHW. This leads to performance
degradation but it is OK as we'll introduce new memcpy implementation
optimized for unaligned memory access using.
We also cut off all PREFETCH instructions at they are quite useless
here:
* we call PREFETCH right before LOAD instruction call.
* we copy 16 or 32 bytes of data (depending on CONFIG_ARC_HAS_LL64)
in a main logical loop. so we call PREFETCH 4 times (or 2 times)
for each L1 cache line (in case of 64B L1 cache Line which is
default case). Obviously this is not optimal.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
It is currently done in arc_init_IRQ() which might be too late
considering gcc 7.3.1 onwards (GNU 2018.03) generates unaligned
memory accesses by default
Cc: stable@vger.kernel.org #4.4+
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: rewrote changelog]
When the RX rings are created they are also populated with buffers so
that packets can be received. Usually these are kernel buffers, but
for AF_XDP in zero-copy mode, these are user-space buffers and in this
case the application might not have sent down any buffers to the
driver at this point. And if no buffers are allocated at ring creation
time, no packets can be received and no interrupts will be generated so
the NAPI poll function that allocates buffers to the rings will never
get executed.
To rectify this, we kick the NAPI context of any queue with an
attached AF_XDP zero-copy socket in two places in the code. Once after
an XDP program has loaded and once after the umem is registered. This
take care of both cases: XDP program gets loaded first then AF_XDP
socket is created, and the reverse, AF_XDP socket is created first,
then XDP program is loaded.
Fixes: d0bcacd0a1 ("ixgbe: add AF_XDP zero-copy Rx support")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When the RX rings are created they are also populated with buffers
so that packets can be received. Usually these are kernel buffers,
but for AF_XDP in zero-copy mode, these are user-space buffers and
in this case the application might not have sent down any buffers
to the driver at this point. And if no buffers are allocated at ring
creation time, no packets can be received and no interrupts will be
generated so the NAPI poll function that allocates buffers to the
rings will never get executed.
To rectify this, we kick the NAPI context of any queue with an
attached AF_XDP zero-copy socket in two places in the code. Once
after an XDP program has loaded and once after the umem is registered.
This take care of both cases: XDP program gets loaded first then AF_XDP
socket is created, and the reverse, AF_XDP socket is created first,
then XDP program is loaded.
Fixes: 0a714186d3 ("i40e: add AF_XDP zero-copy Rx support")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When REGULATOR_CHANGE_DRMS is not set, drms_uA_update is a no-op.
It used to print a debug message, which was dropped in commit
8a34e979f6 ("regulator: refactor valid_ops_mask checking code")
Let's bring the debug message back, because it helps find missing
regulator-allow-set-load properties.
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
The lp873x_buck_ramp_delay should never change, make it const.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Read port count from the shared memory instead of driver deriving this
value. This change simplifies the driver implementation and also avoids
any dependencies for finding the port-count.
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The enabling L3/L4 filtering for transmit switched packets for all
devices caused unforeseen issue on older devices when trying to send UDP
traffic in an ordered sequence. This bit was originally intended for X550
devices, which supported this feature, so limit the scope of this bit to
only X550 devices.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Eran Ben Elisha says:
====================
Devlink health fixes series
This series includes two small fixes from Aya for the devlink health
infrastructure introduced earlier in this window.
First patch rename some UAPI attributes to better reflect their use.
Second patch reduces the amount of data passed from the devlink to the
netlink layer upon get reporter command, in case of no-recovery reporter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid sending attributes related to recovery:
DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD and
DEVLINK_ATTR_HEALTH_REPORTER_AUTO_RECOVER in reply to
DEVLINK_CMD_HEALTH_REPORTER_GET for a reporter which didn't register a
recover operation.
These parameters can't be configured on a reporter that did not provide
a recover operation, thus not needed to return them.
Fixes: 7afe335a8b ("devlink: Add health get command")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename devlink health attributes for better reflect the attributes use.
Add COUNT prefix on error counter attribute and recovery counter
attribute.
Fixes: 7afe335a8b ("devlink: Add health get command")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun says:
====================
net/smc: patches 2019-02-21
here are patches for SMC:
* patch 1 is a cleanup without functional change
* patches 2-6 enhance SMC pnetid support
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
SMC-D devices are identified by their PCI IDs in the pnet table. In
order to make usage of the pnet table more consistent for users, this
patch adds this form of identification for ib devices as well.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds namespace support to the pnet table code. Each network
namespace gets its own pnet table. Infiniband and smcd device pnetids
can only be modified in the initial namespace. In other namespaces they
can still be used as if they were set by the underlying hardware.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, users can only set pnetids for netdevs and ib devices in the
pnet table. This patch adds support for smcd devices to the pnet table.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a device does not have a pnetid, users can set a temporary pnetid for
said device in the pnet table. This patch reworks the pnet table to make
it more flexible. Multiple entries with the same pnetid but differing
devices are now allowed. Additionally, the netlink interface now sends
each mapping from pnetid to device separately to the user while
maintaining the message format existing applications might expect. Also,
the SMC data structure for ib devices already has a pnetid attribute.
So, it is used to store the user defined pnetids. As a result, the pnet
table entries are only used for netdevs.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pnetids are retrieved from the underlying hardware as EBCDIC. This patch
converts pnetids to ASCII.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use local variable pflags from the beginning of function
smcr_tx_sndbuf_nonempty
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The check if (bh) in udf_sync_fs() is pointless as we cannot have
sbi->s_lvid_dirty and !sbi->s_lvid_bh (as already asserted by
udf_updated_lvid()). So just drop the pointless check.
Reviewed-by: Steven J. Magnani <steve@digidescorp.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>
A 'false retry' in NFSv4.1 occurs when the client attempts to transmit a
new RPC call using a slot+sequence number combination that references an
already cached one. Currently, the Linux NFS client will do this if a
user process interrupts an RPC call that is in progress.
The problem with doing so is that we defeat the main mechanism used by
the server to differentiate between a new call and a replayed one. Even
if the server is able to perfectly cache the arguments of the old call,
it cannot know if the client intended to replay or send a new call.
The obvious fix is to bump the sequence number pre-emptively if an
RPC call is interrupted, but in order to deal with the corner cases
where the interrupted call is not actually received and processed by
the server, we need to interpret the error NFS4ERR_SEQ_MISORDERED
as a sign that we need to either wait or locate a correct sequence
number that lies between the value we sent, and the last value that
was acked by a SEQUENCE call on that slot.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Jason Tibbitts <tibbs@math.uh.edu>
smc_poll() returns with mask bit EPOLLPRI if the connection urg_state
is SMC_URG_VALID. Since SMC_URG_VALID is zero, smc_poll signals
EPOLLPRI errorneously if called in state SMC_INIT before the connection
is created, for instance in a non-blocking connect scenario.
This patch switches to non-zero values for the urg states.
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Fixes: de8474eb9d ("net/smc: urgent data support")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Block bounce needs to allocate new page for doing IO, and the
new page has to be updated to bvec table.
Commit 6dc4f100c switches __blk_queue_bounce() to use the new
bio_for_each_segment_all() interface. Unfortunately the new
bio_for_each_segment_all() can't be used to update bvec table.
This patch fixes this issue by retrieving bvec from the table
directly, then the new allocated page can be updated to the bio.
This way is safe because the cloned bio is single page bvec.
Fixes: 6dc4f100c ("block: allow bio_for_each_segment_all() to iterate over multi-page bvec")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Paolo Abeni says:
====================
ipv6: route: enforce RCU protection for fib6_info->from
This series addresses a couple of RCU left-over dating back to rt6_info->from
conversion to RCU
v1 -> v2:
- fix a possible race in patch 1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We need a RCU critical section around rt6_info->from deference, and
proper annotation.
Fixes: 4ed591c8ab ("net/ipv6: Allow onlink routes to have a device mismatch if it is the default route")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We must access rt6_info->from under RCU read lock: move the
dereference under such lock, with proper annotation.
v1 -> v2:
- avoid using multiple, racy, fetch operations for rt->from
Fixes: a68886a691 ("net/ipv6: Make from in rt6_info rcu protected")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull ceph fixes from Ilya Dryomov:
"Two bug fixes for old issues, both marked for stable"
* tag 'ceph-for-5.0-rc8' of git://github.com/ceph/ceph-client:
ceph: avoid repeatedly adding inode to mdsc->snap_flush_list
libceph: handle an empty authorize reply
Pull NVMe changes for 5.1 from Christoph
* 'nvme-5.1' of git://git.infradead.org/nvme: (22 commits)
nvme-rdma: use nr_phys_segments when map rq to sgl
nvmet: convert to SPDX identifiers
nvmet-rdma: convert to SPDX identifiers
nvme-loop: convert to SPDX identifiers
nvmet-fcloop: convert to SPDX identifiers
nvmet-fc: convert to SPDX identifiers
nvme: convert to SPDX identifiers
nvme-pci: convert to SPDX identifiers
nvme-lightnvm: convert to SPDX identifiers
nvme-rdma: convert to SPDX identifiers
nvme-fc: convert to SPDX identifiers
nvme-fabrics: convert to SPDX identifiers
nvme-tcp.h: fix SPDX header
nvme_ioctl.h: remove duplicate GPL boilerplate
nvme: return error from nvme_alloc_ns()
nvme: avoid that deleting a controller triggers a circular locking complaint
nvme: introduce a helper function for controller deletion
nvme: unexport nvme_delete_ctrl_sync()
nvme-pci: check kstrtoint() return value in queue_count_set()
nvme-fabrics: document the poll function argument
...
Johan writes:
GNSS updates for 5.1-rc1
Here are the GNSS updates for 5.1-rc1, including:
- a new driver for Mediatek-based receivers
- support for SiRF receivers without a wakeup signal
- support for a separate LNA supply for SiRF receivers
Included are also various clean ups and minor fixes.
All have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
* tag 'gnss-5.1-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss:
gnss: add driver for mediatek receivers
gnss: add mtk receiver type support
dt-bindings: gnss: add mediatek binding
dt-bindings: Add vendor prefix for "GlobalTop Technology, Inc."
dt-bindings: gnss: add lna-supply property
gnss: sirf: add a separate supply for a lna
dt-bindings: gnss: add w2sg0004 compatible string
gnss: sirf: add support for configurations without wakeup signal
gnss: sirf: write data to gnss only when the gnss device is open
gnss: sirf: drop redundant double negation
gnss: sirf: force hibernate mode on probe
gnss: sirf: fix premature wakeup interrupt enable
Pull late arm64 fixes from Will Deacon:
"Three small arm64 fixes for 5.0.
They fix a build breakage with clang introduced in 4.20, an oversight
in our sigframe restoration relating to the SSBS bit and a boot fix
for systems with newer revisions of our interrupt controller.
Summary:
- Fix handling of PSTATE.SSBS bit in sigreturn()
- Fix version checking of the GIC during early boot
- Fix clang builds failing due to use of NEON in the crypto code"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Relax GIC version check during early boot
arm64/neon: Disable -Wincompatible-pointer-types when building with Clang
arm64: fix SSBS sanitization
Merge misc fixes from Andrew Morton:
"23 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (23 commits)
mm, memory_hotplug: fix off-by-one in is_pageblock_removable
mm: don't let userspace spam allocations warnings
slub: fix a crash with SLUB_DEBUG + KASAN_SW_TAGS
kasan, slab: remove redundant kasan_slab_alloc hooks
kasan, slab: make freelist stored without tags
kasan, slab: fix conflicts with CONFIG_HARDENED_USERCOPY
kasan: prevent tracing of tags.c
kasan: fix random seed generation for tag-based mode
tmpfs: fix link accounting when a tmpfile is linked in
psi: avoid divide-by-zero crash inside virtual machines
mm: handle lru_add_drain_all for UP properly
mm, page_alloc: fix a division by zero error when boosting watermarks v2
mm/debug.c: fix __dump_page() for poisoned pages
proc, oom: do not report alien mms when setting oom_score_adj
slub: fix SLAB_CONSISTENCY_CHECKS + KASAN_SW_TAGS
kasan, slub: fix more conflicts with CONFIG_SLAB_FREELIST_HARDENED
kasan, slub: fix conflicts with CONFIG_SLAB_FREELIST_HARDENED
kasan, slub: move kasan_poison_slab hook before page_address
kmemleak: account for tagged pointers when calculating pointer range
kasan, kmemleak: pass tagged pointers to kmemleak
...
Rong Chen has reported the following boot crash:
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 239 Comm: udevd Not tainted 5.0.0-rc4-00149-gefad4e4 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
RIP: 0010:page_mapping+0x12/0x80
Code: 5d c3 48 89 df e8 0e ad 02 00 85 c0 75 da 89 e8 5b 5d c3 0f 1f 44 00 00 53 48 89 fb 48 8b 43 08 48 8d 50 ff a8 01 48 0f 45 da <48> 8b 53 08 48 8d 42 ff 83 e2 01 48 0f 44 c3 48 83 38 ff 74 2f 48
RSP: 0018:ffff88801fa87cd8 EFLAGS: 00010202
RAX: ffffffffffffffff RBX: fffffffffffffffe RCX: 000000000000000a
RDX: fffffffffffffffe RSI: ffffffff820b9a20 RDI: ffff88801e5c0000
RBP: 6db6db6db6db6db7 R08: ffff88801e8bb000 R09: 0000000001b64d13
R10: ffff88801fa87cf8 R11: 0000000000000001 R12: ffff88801e640000
R13: ffffffff820b9a20 R14: ffff88801f145258 R15: 0000000000000001
FS: 00007fb2079817c0(0000) GS:ffff88801dd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000006 CR3: 000000001fa82000 CR4: 00000000000006a0
Call Trace:
__dump_page+0x14/0x2c0
is_mem_section_removable+0x24c/0x2c0
removable_show+0x87/0xa0
dev_attr_show+0x25/0x60
sysfs_kf_seq_show+0xba/0x110
seq_read+0x196/0x3f0
__vfs_read+0x34/0x180
vfs_read+0xa0/0x150
ksys_read+0x44/0xb0
do_syscall_64+0x5e/0x4a0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
and bisected it down to commit efad4e475c ("mm, memory_hotplug:
is_mem_section_removable do not pass the end of a zone").
The reason for the crash is that the mapping is garbage for poisoned
(uninitialized) page. This shouldn't happen as all pages in the zone's
boundary should be initialized.
Later debugging revealed that the actual problem is an off-by-one when
evaluating the end_page. 'start_pfn + nr_pages' resp 'zone_end_pfn'
refers to a pfn after the range and as such it might belong to a
differen memory section.
This along with CONFIG_SPARSEMEM then makes the loop condition
completely bogus because a pointer arithmetic doesn't work for pages
from two different sections in that memory model.
Fix the issue by reworking is_pageblock_removable to be pfn based and
only use struct page where necessary. This makes the code slightly
easier to follow and we will remove the problematic pointer arithmetic
completely.
Link: http://lkml.kernel.org/r/20190218181544.14616-1-mhocko@kernel.org
Fixes: efad4e475c ("mm, memory_hotplug: is_mem_section_removable do not pass the end of a zone")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: <rong.a.chen@intel.com>
Tested-by: <rong.a.chen@intel.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are two issues with assigning random percpu seeds right now:
1. We use for_each_possible_cpu() to iterate over cpus, but cpumask is
not set up yet at the moment of kasan_init(), and thus we only set
the seed for cpu #0.
2. A call to get_random_u32() always returns the same number and produces
a message in dmesg, since the random subsystem is not yet initialized.
Fix 1 by calling kasan_init_tags() after cpumask is set up.
Fix 2 by using get_cycles() instead of get_random_u32(). This gives us
lower quality random numbers, but it's good enough, as KASAN is meant to
be used as a debugging tool and not a mitigation.
Link: http://lkml.kernel.org/r/1f815cc914b61f3516ed4cc9bfd9eeca9bd5d9de.1550677973.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
tmpfs has a peculiarity of accounting hard links as if they were
separate inodes: so that when the number of inodes is limited, as it is
by default, a user cannot soak up an unlimited amount of unreclaimable
dcache memory just by repeatedly linking a file.
But when v3.11 added O_TMPFILE, and the ability to use linkat() on the
fd, we missed accommodating this new case in tmpfs: "df -i" shows that
an extra "inode" remains accounted after the file is unlinked and the fd
closed and the actual inode evicted. If a user repeatedly links
tmpfiles into a tmpfs, the limit will be hit (ENOSPC) even after they
are deleted.
Just skip the extra reservation from shmem_link() in this case: there's
a sense in which this first link of a tmpfile is then cheaper than a
hard link of another file, but the accounting works out, and there's
still good limiting, so no need to do anything more complicated.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1902182134370.7035@eggly.anvils
Fixes: f4e0c30c19 ("allow the temp files created by open() to be linked to")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Matej Kupljen <matej.kupljen@gmail.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We've been seeing hard-to-trigger psi crashes when running inside VM
instances:
divide error: 0000 [#1] SMP PTI
Modules linked in: [...]
CPU: 0 PID: 212 Comm: kworker/0:2 Not tainted 4.16.18-119_fbk9_3817_gfe944c98d695 #119
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
Workqueue: events psi_clock
RIP: 0010:psi_update_stats+0x270/0x490
RSP: 0018:ffffc90001117e10 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8800a35a13f8
RDX: 0000000000000000 RSI: ffff8800a35a1340 RDI: 0000000000000000
RBP: 0000000000000658 R08: ffff8800a35a1470 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 00000000000f8502
FS: 0000000000000000(0000) GS:ffff88023fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fbe370fa000 CR3: 00000000b1e3a000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
psi_clock+0x12/0x50
process_one_work+0x1e0/0x390
worker_thread+0x2b/0x3c0
? rescuer_thread+0x330/0x330
kthread+0x113/0x130
? kthread_create_worker_on_cpu+0x40/0x40
? SyS_exit_group+0x10/0x10
ret_from_fork+0x35/0x40
Code: 48 0f 47 c7 48 01 c2 45 85 e4 48 89 16 0f 85 e6 00 00 00 4c 8b 49 10 4c 8b 51 08 49 69 d9 f2 07 00 00 48 6b c0 64 4c 8b 29 31 d2 <48> f7 f7 49 69 d5 8d 06 00 00 48 89 c5 4c 69 f0 00 98 0b 00 48
The Code-line points to `period` being 0 inside update_stats(), and we
divide by that when calculating that period's pressure percentage.
The elapsed period should never be 0. The reason this can happen is due
to an off-by-one in the idle time / missing period calculation combined
with a coarse sched_clock() in the virtual machine.
The target time for aggregation is advanced into the future on a fixed
grid to prevent clock drift. So when an aggregation runs after some idle
period, we can not just set it to "now + psi_period", but have to
calculate the downtime and advance the target time relative to itself.
However, if the aggregator was disabled exactly one psi_period (ns), we
drop one idle period in the calculation due to a > when we should do >=.
In that case, next_update will be advanced from 'now - psi_period' to
'now' when it should be moved to 'now + psi_period'. The run finishes
with last_update == next_update == sched_clock().
With hardware clocks, this exact nanosecond match isn't likely in the
first place; but if it does happen, the clock will still have moved on and
the period non-zero by the time the worker runs. A pointlessly short
period, but besides the extra work, no harm no foul. However, a slow
sched_clock() like we have on VMs might not have advanced either by the
time the worker runs again. And when we calculate the elapsed period, the
result, our pressure divisor, will be 0. Ouch.
Fix this by correctly handling the situation when the elapsed time between
aggregation runs is precisely two periods, and advance the expiration
timestamp correctly to period into the future.
Link: http://lkml.kernel.org/r/20190214193157.15788-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Łukasz Siudut <lsiudut@fb.com
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since for_each_cpu(cpu, mask) added by commit 2d3854a37e
("cpumask: introduce new API, without changing anything") did not
evaluate the mask argument if NR_CPUS == 1 due to CONFIG_SMP=n,
lru_add_drain_all() is hitting WARN_ON() at __flush_work() added by
commit 4d43d395fe ("workqueue: Try to catch flush_work() without
INIT_WORK().") by unconditionally calling flush_work() [1].
Workaround this issue by using CONFIG_SMP=n specific lru_add_drain_all
implementation. There is no real need to defer the implementation to
the workqueue as the draining is going to happen on the local cpu. So
alias lru_add_drain_all to lru_add_drain which does all the necessary
work.
[akpm@linux-foundation.org: fix various build warnings]
[1] https://lkml.kernel.org/r/18a30387-6aa5-6123-e67c-57579ecc3f38@roeck-us.net
Link: http://lkml.kernel.org/r/20190213124334.GH4525@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Debugged-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Evaluating page_mapping() on a poisoned page ends up dereferencing junk
and making PF_POISONED_CHECK() considerably crashier than intended:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000006
Mem abort info:
ESR = 0x96000005
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000005
CM = 0, WnR = 0
user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c2f6ac38
[0000000000000006] pgd=0000000000000000, pud=0000000000000000
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 491 Comm: bash Not tainted 5.0.0-rc1+ #1
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Dec 17 2018
pstate: 00000005 (nzcv daif -PAN -UAO)
pc : page_mapping+0x18/0x118
lr : __dump_page+0x1c/0x398
Process bash (pid: 491, stack limit = 0x000000004ebd4ecd)
Call trace:
page_mapping+0x18/0x118
__dump_page+0x1c/0x398
dump_page+0xc/0x18
remove_store+0xbc/0x120
dev_attr_store+0x18/0x28
sysfs_kf_write+0x40/0x50
kernfs_fop_write+0x130/0x1d8
__vfs_write+0x30/0x180
vfs_write+0xb4/0x1a0
ksys_write+0x60/0xd0
__arm64_sys_write+0x18/0x20
el0_svc_common+0x94/0xf8
el0_svc_handler+0x68/0x70
el0_svc+0x8/0xc
Code: f9400401 d1000422 f240003f 9a801040 (f9400402)
---[ end trace cdb5eb5bf435cecb ]---
Fix that by not inspecting the mapping until we've determined that it's
likely to be valid. Now the above condition still ends up stopping the
kernel, but in the correct manner:
page:ffffffbf20000000 is uninitialized and poisoned
raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
------------[ cut here ]------------
kernel BUG at ./include/linux/mm.h:1006!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 483 Comm: bash Not tainted 5.0.0-rc1+ #3
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Dec 17 2018
pstate: 40000005 (nZcv daif -PAN -UAO)
pc : remove_store+0xbc/0x120
lr : remove_store+0xbc/0x120
...
Link: http://lkml.kernel.org/r/03b53ee9d7e76cda4b9b5e1e31eea080db033396.1550071778.git.robin.murphy@arm.com
Fixes: 1c6fb1d89e ("mm: print more information about mapping in __dump_page")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
