Currently the opal log is globally readable. It is kernel policy to
limit the visibility of physical addresses / kernel pointers to root.
Given this and the fact the opal log may contain this information it
would be better to limit the readability to root.
Fixes: bfc36894a4 ("powerpc/powernv: Add OPAL message log interface")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Stewart Smith <stewart@linux.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, we don't coordinate BT USB activity with our handling of the
BT out-of-band wake pin, and instead just use gpio-keys. That causes
problems because we have no way of distinguishing wake activity due to a
BT device (e.g., mouse) vs. the BT controller (e.g., re-configuring wake
mask before suspend). This can cause spurious wake events just because
we, for instance, try to reconfigure the host controller's event mask
before suspending.
We can avoid these synchronization problems by handling the BT wake pin
directly in the btusb driver -- for all activity up until BT controller
suspend(), we simply listen to normal USB activity (e.g., to know the
difference between device and host activity); once we're really ready to
suspend the host controller, there should be no more host activity, and
only *then* do we unmask the GPIO interrupt.
This is already supported by btusb; we just need to describe the wake
pin in the right node.
We list 2 compatible properties, since both PID/VID pairs show up on
Scarlet devices, and they're both essentially identical QCA6174A-based
modules.
Also note that the polarity was wrong before: Qualcomm implemented WAKE
as active high, not active low. We only got away with this because
gpio-keys always reconfigured us as bi-directional edge-triggered.
Finally, we have an external pull-up and a level-shifter on this line
(we didn't notice Qualcomm's polarity in the initial design), so we
can't do pull-down. Switch to pull-none.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
My console locks up as soon as Linux writes to [88800000,88f00000[
AFAIU, that memory area is reserved for trustzone.
Extend TZ reserved memory range, to prevent Linux from stepping on
trustzone's toes.
Cc: stable@vger.kernel.org # 4.20+
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Fixes: c783394956 ("arm64: dts: qcom: msm8998: Add smem related nodes")
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Compiling with CONFIG_PPC_POWERNV=y and KVM disabled currently gives
an error like this:
CC arch/powerpc/kernel/dbell.o
In file included from arch/powerpc/kernel/dbell.c:20:0:
arch/powerpc/include/asm/kvm_ppc.h: In function ‘xics_on_xive’:
arch/powerpc/include/asm/kvm_ppc.h:625:9: error: implicit declaration of function ‘xive_enabled’ [-Werror=implicit-function-declaration]
return xive_enabled() && cpu_has_feature(CPU_FTR_HVMODE);
^
cc1: all warnings being treated as errors
scripts/Makefile.build:276: recipe for target 'arch/powerpc/kernel/dbell.o' failed
make[3]: *** [arch/powerpc/kernel/dbell.o] Error 1
Fix this by making the xics_on_xive() definition conditional on the
same symbol (CONFIG_KVM_BOOK3S_64_HANDLER) that determines whether we
include <asm/xive.h> or not, since that's the header that defines
xive_enabled().
Fixes: 03f953329b ("KVM: PPC: Book3S: Allow XICS emulation to work in nested hosts using XIVE")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The assembly macro get_thread_info() actually returns a task_struct and is
analogous to the current/get_current macro/function.
While it could be argued that thread_info sits at the start of
task_struct and the intention could have been to return a thread_info,
instances of loads from/stores to the address obtained from
get_thread_info() use offsets that are generated with
offsetof(struct task_struct, [...]).
Rename get_thread_info() to state it returns a task_struct.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When building with -Wsometimes-uninitialized, Clang warns:
arch/powerpc/xmon/ppc-dis.c:157:7: warning: variable 'opcode' is used
uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
if (cpu_has_feature(CPU_FTRS_POWER9))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/xmon/ppc-dis.c:167:7: note: uninitialized use occurs here
if (opcode == NULL)
^~~~~~
arch/powerpc/xmon/ppc-dis.c:157:3: note: remove the 'if' if its
condition is always true
if (cpu_has_feature(CPU_FTRS_POWER9))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/xmon/ppc-dis.c:132:38: note: initialize the variable
'opcode' to silence this warning
const struct powerpc_opcode *opcode;
^
= NULL
1 warning generated.
This warning seems to make no sense on the surface because opcode is set
to NULL right below this statement. However, there is a comma instead of
semicolon to end the dialect assignment, meaning that the opcode
assignment only happens in the if statement. Properly terminate that
line so that Clang no longer warns.
Fixes: 5b102782c7 ("powerpc/xmon: Enable disassembly files (compilation changes)")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The OPAL call wrapper gets interrupt disabling wrong. It disables
interrupts just by clearing MSR[EE], which has two problems:
- It doesn't call into the IRQ tracing subsystem, which means tracing
across OPAL calls does not always notice IRQs have been disabled.
- It doesn't go through the IRQ soft-mask code, which causes a minor
bug. MSR[EE] can not be restored by saving the MSR then clearing
MSR[EE], because a racing interrupt while soft-masked could clear
MSR[EE] between the two steps. This can cause MSR[EE] to be
incorrectly enabled when the OPAL call returns. Fortunately that
should only result in another masked interrupt being taken to
disable MSR[EE] again, but it's a bit sloppy.
The existing code also saves MSR to PACA, which is not re-entrant if
there is a nested OPAL call from different MSR contexts, which can
happen these days with SRESET interrupts on bare metal.
To fix these issues, move the tracing and IRQ handling code to C, and
call into asm just for the low level call when everything is ready to
go. Save the MSR on stack rather than PACA.
Performance cost is kept to a minimum with a few optimisations:
- The endian switch upon return is combined with the MSR restore,
which avoids an expensive context synchronizing operation for LE
kernels. This makes up for the additional mtmsrd to enable
interrupts with local_irq_enable().
- blr is now used to return from the opal_* functions that are called
as C functions, to avoid link stack corruption. This requires a
skiboot fix as well to keep the call stack balanced.
A NULL call is more costly after this, (410ns->430ns on POWER9), but
OPAL calls are generally not performance critical at this scale.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Handlers for interrupts that set DAR / DSISR, set MSR[RI] before those
SPRs are read. If a d-side machine check hits in this window, DAR /
DSISR will be clobbered silently, leading to random corruption.
Fix this by having handlers save those registers before setting MSR[RI].
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A subsequent fix for data interrupts (those that set DAR / DSISR)
requires some interrupt macros to be open-coded, and also requires
the 0x300 interrupt handler to be moved out-of-line.
This patch does that without changing behaviour, which makes the later
fix a smaller change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Code that uses HSRR registers is not required to clear MSR[RI] by
convention, however the system reset NMI itself may use HSRR
registers (e.g., to call OPAL) and clobber them.
Rather than introduce the requirement to clear RI in order to use
HSRRs, have system reset interrupt save and restore HSRRs.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
HV interrupts that use HSRR registers do not enter with MSR[RI] clear,
but their entry code is not recoverable vs NMI, due to shared use of
HSPRG1 as a scratch register to save r13.
This means that a system reset or machine check that hits in HSRR
interrupt entry can cause r13 to be silently corrupted.
Fix this by marking NMIs non-recoverable if they land in HV interrupt
ranges.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
To access PRBARn, where n is referenced as a binary number:
MRC p15, 0, <Rt>, c6, c8+n[3:1], 4*n[0] ; Read PRBARn into Rt
MCR p15, 0, <Rt>, c6, c8+n[3:1], 4*n[0] ; Write Rt into PRBARn
To access PRLARn, where n is referenced as a binary number:
MRC p15, 0, <Rt>, c6, c8+n[3:1], 4*n[0]+1 ; Read PRLARn into Rt
MCR p15, 0, <Rt>, c6, c8+n[3:1], 4*n[0]+1 ; Write Rt into PRLARn
For PR{B,L}AR4, n is 4, n[0] is 0, n[3:1] is 2, while current encoding
done with n[0] set to 1 which is wrong. Use proper encoding instead.
Fixes: 046835b4aa ("ARM: 8757/1: NOMMU: Support PMSAv8 MPU")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
arm64 has got relaxation on GIC version check at early boot stage due
to update of the GIC architecture let's align ARM with that.
To help backports (even though the code was correct at the time of writing)
Fixes: e59941b9b3 ("ARM: 8527/1: virt: enable GICv3 system registers")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
MCPM does a soft reset of the CPUs and uses common cpu_resume() routine to
perform low-level platform initialization. This results in a try to install
HYP stubs for the second time for each CPU and results in false HYP/SVC
mode mismatch detection. The HYP stubs are already installed at the
beginning of the kernel initialization on the boot CPU (head.S) or in the
secondary_startup() for other CPUs. To fix this issue MCPM code should use
a cpu_resume() routine without HYP stubs installation.
This change fixes HYP/SVC mode mismatch on Samsung Exynos5422-based Odroid
XU3/XU4/HC1 boards.
Fixes: 3721924c81 ("ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use unified assembler syntax (UAL) in inline assembler. Divided
syntax is considered deprecated. This will also allow to build
the kernel using LLVM's integrated assembler.
When compiling non-Thumb2 GCC always emits a ".syntax divided"
at the beginning of the inline assembly which makes the
assembler fail. Since GCC 5 there is the -masm-syntax-unified
GCC option which make GCC assume unified syntax asm and hence
emits ".syntax unified" even in ARM mode. However, the option
is broken since GCC version 6 (see GCC PR88648 [1]). Work
around by adding ".syntax unified" as part of the inline
assembly.
[0] https://gcc.gnu.org/onlinedocs/gcc/ARM-Options.html#index-masm-syntax-unified
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88648
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use unified assembler syntax (UAL) in assembly files. Divided
syntax is considered deprecated. This will also allow to build
the kernel using LLVM's integrated assembler.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use unified assembler syntax (UAL) in headers. Divided syntax is
considered deprecated. This will also allow to build the kernel
using LLVM's integrated assembler.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use unified assembler syntax (UAL) in macros. Divided syntax is
considered deprecated. This will also allow to build the kernel
using LLVM's integrated assembler.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Mostly unwind is done with irqs enabled however SLUB may call it with
irqs disabled while creating a new SLUB cache.
I had system freeze while loading a module which called
kmem_cache_create() on init. That means SLUB's __slab_alloc() disabled
interrupts and then
->new_slab_objects()
->new_slab()
->setup_object()
->setup_object_debug()
->init_tracking()
->set_track()
->save_stack_trace()
->save_stack_trace_tsk()
->walk_stackframe()
->unwind_frame()
->unwind_find_idx()
=>spin_lock_irqsave(&unwind_lock);
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
When running kprobe on -rt kernel, the below bug is caught:
|BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:931
|in_atomic(): 1, irqs_disabled(): 128, pid: 14, name: migration/0
|Preemption disabled at:[<802f2b98>] cpu_stopper_thread+0xc0/0x140
|CPU: 0 PID: 14 Comm: migration/0 Tainted: G O 4.8.3-rt2 #1
|Hardware name: Freescale LS1021A
|[<8025a43c>] (___might_sleep)
|[<80b5b324>] (rt_spin_lock)
|[<80b5c31c>] (__patch_text_real)
|[<80b5c3ac>] (patch_text_stop_machine)
|[<802f2920>] (multi_cpu_stop)
Since patch_text_stop_machine() is called in stop_machine() which
disables IRQ, sleepable lock should be not used in this atomic context,
so replace patch_lock to raw lock.
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
When doing top-down search the low_limit is not PAGE_SIZE but rather
max(PAGE_SIZE, mmap_min_addr). This handle cases in which mmap_min_addr >
PAGE_SIZE.
Fixes: fba2369e6c ("mm: use vm_unmapped_area() on powerpc architecture")
Reviewed-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
After we ALIGN up the address we need to make sure we didn't overflow
and resulted in zero address. In that case, we need to make sure that
the returned address is greater than mmap_min_addr.
This fixes selftest va_128TBswitch --run-hugetlb reporting failures when
run as non root user for
mmap(-1, MAP_HUGETLB)
The bug is that a non-root user requesting address -1 will be given address 0
which will then fail, whereas they should have been given something else that
would have succeeded.
We also avoid the first mmap(-1, MAP_HUGETLB) returning NULL address as mmap address
with this change. So we think this is not a security issue, because it only affects
whether we choose an address below mmap_min_addr, not whether we
actually allow that address to be mapped. ie. there are existing capability
checks to prevent a user mapping below mmap_min_addr and those will still be
honoured even without this fix.
Fixes: 484837601d ("powerpc/mm: Add radix support for hugetlb")
Reviewed-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The syscall ABI has long been fixed, so no need to call that out now.
Also, there's no need to print really fine details such as norm,
barrel-shifter etc. Those are given in a Linux enabled hardware config.
So now we print just 1 line for all optional "instruction" related
hardware features
|
| ISA Extn : atomic ll64 unalign mpy[opt 9] div_rem
vs. 2 before
|
|ISA Extn : atomic ll64 unalign
| : mpy[opt 9] div_rem norm barrel-shift swap minmax swape
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
HS core names and releases have so far been identified based solely on
IDENTIFY.ARCVER field. With the future HS releases this will not
be sufficient as same ARCVER 0x54 could be an HS38 or HS48.
So rewrite the code to use a new BCR to identify the cores properly.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
In
c7d606f560 ("x86/mce: Improve error message when kernel cannot recover")
a case was added for a machine check caused by a DATA access to poison
memory from the kernel. A case should have been added also for an
uncorrectable error during an instruction fetch in the kernel.
Add that extra case so the error message now reads:
mce: [Hardware Error]: Machine check: Instruction fetch error in kernel
Fixes: c7d606f560 ("x86/mce: Improve error message when kernel cannot recover")
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Pu Wen <puwen@hygon.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190225205940.15226-1-tony.luck@intel.com
The separate GPHY Firmware loader driver is not used any more, the GPHY
firmware is now loaded by the GSWIP switch driver which also makes use
of the GPHY.
Remove the old unused GPHY firmware loader driver.
The GPHY firmware is useless without an Ethernet and switch driver, it
should not harm if loading this does not work for system using an old
device tree.
I am not aware of any vendor separating the device tree from the kernel
binary, it should be ok to remove this.
The code and the functionality form this separate GPHY firmware loader
was added to the gswip driver in commit 14fceff477 ("net: dsa: Add
Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: john@phrozen.org
Cc: netdev@vger.kernel.org
We have now a HSDK device in our kernelci lab, but kernel builded via
the hsdk_defconfig lacks ramfs supports, so it cannot boot kernelci jobs
yet.
So this patch enable CONFIG_BLK_DEV_RAM in hsdk_defconfig.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
In case of devboards we really often disable bootloader and load
Linux image in memory via JTAG. Even if kernel tries to verify
uboot_tag and uboot_arg there is sill a chance that we treat some
garbage in registers as valid u-boot arguments in JTAG case.
E.g. it is enough to have '1' in r0 to treat any value in r2 as
a boot command line.
So check that magic number passed from u-boot is correct and drop
u-boot arguments otherwise. That helps to reduce the possibility
of using garbage as u-boot arguments in JTAG case.
We can safely check U-boot magic value (0x0) in linux passed via
r1 register as U-boot pass it from the beginning. So there is no
backward-compatibility issues.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
As of today we enable unaligned access unconditionally on ARCv2.
Do this under a Kconfig option to allow disable it for test, benchmarking
etc. Also while at it
- Select HAVE_EFFICIENT_UNALIGNED_ACCESS
- Although gcc defaults to unaligned access (since GNU 2018.03), add the
right toggles for enabling or disabling as appropriate
- update bootlog to prints both HW feature status (exists, enabled/disabled)
and SW status (used / not used).
- wire up the relaxed memcpy for unaligned access
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: squashed patches, handle gcc -mno-unaligned-access quick]
We don't yet have an upstream glibc port for riscv, so there is no user
space for the existing ABI, and we can remove the definitions for 32-bit
time_t, off_t and struct resource and system calls based on them,
including the vdso.
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When calling __put_user(foo(), ptr), the __put_user() macro would call
foo() in between __uaccess_begin() and __uaccess_end(). If that code
were buggy, then those bugs would be run without SMAP protection.
Fortunately, there seem to be few instances of the problem in the
kernel. Nevertheless, __put_user() should be fixed to avoid doing this.
Therefore, evaluate __put_user()'s argument before setting AC.
This issue was noticed when an objtool hack by Peter Zijlstra complained
about genregs_get() and I compared the assembly output to the C source.
[ bp: Massage commit message and fixed up whitespace. ]
Fixes: 11f1a4b975 ("x86: reorganize SMAP handling in user space accesses")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20190225125231.845656645@infradead.org
This reverts commit 9da3f2b740.
It was well-intentioned, but wrong. Overriding the exception tables for
instructions for random reasons is just wrong, and that is what the new
code did.
It caused problems for tracing, and it caused problems for strncpy_from_user(),
because the new checks made perfectly valid use cases break, rather than
catch things that did bad things.
Unchecked user space accesses are a problem, but that's not a reason to
add invalid checks that then people have to work around with silly flags
(in this case, that 'kernel_uaccess_faults_ok' flag, which is just an
odd way to say "this commit was wrong" and was sprinked into random
places to hide the wrongness).
The real fix to unchecked user space accesses is to get rid of the
special "let's not check __get_user() and __put_user() at all" logic.
Make __{get|put}_user() be just aliases to the regular {get|put}_user()
functions, and make it impossible to access user space without having
the proper checks in places.
The raison d'être of the special double-underscore versions used to be
that the range check was expensive, and if you did multiple user
accesses, you'd do the range check up front (like the signal frame
handling code, for example). But SMAP (on x86) and PAN (on ARM) have
made that optimization pointless, because the _real_ expense is the "set
CPU flag to allow user space access".
Do let's not break the valid cases to catch invalid cases that shouldn't
even exist.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tobin C. Harding <tobin@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Optimise code to use efficient unaligned memory access which is
available on ARCv2. This allows us to really simplify memcpy code
and speed up the code one and a half times (in case of unaligned
source or destination).
Don't wire it up yet !
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
DW USB controller on HSDK hangs sometimes after SW reset, so
add reset handle to make possible to reset DW USB controller HW.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
1. Remove "0x" prefix from unit-address of node names
----------------------->8------------------------
sed -i 's/@0x/@/g' arch/arc/boot/dts/*.dts*
----------------------->8------------------------
2. Make all hex addresses lowercase:
----------------------->8------------------------
sed -i 's/@\([0-9A-Za-z]*\)/@\L\1/g' arch/arc/boot/dts/*.dts*
sed -i 's/0x\([0-9A-Za-z]*\)/0x\L\1/g' arch/arc/boot/dts/*.dts*
----------------------->8------------------------
Inspired by [1] and the like.
[1] http://kisskb.ellerman.id.au/kisskb/buildresult/13612017/
Reviewed-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
This adds emulation support for the following integer instructions:
* Modulo Signed Doubleword (modsd)
* Modulo Unsigned Doubleword (modud)
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds emulation support for the following integer instructions:
* Modulo Signed Word (modsw)
* Modulo Unsigned Word (moduw)
Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds emulation support for the following integer instructions:
* Extend-Sign Word and Shift Left Immediate (extswsli[.])
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds emulation support for the following integer instructions:
* Count Trailing Zeros Word (cnttzw[.])
* Count Trailing Zeros Doubleword (cnttzd[.])
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds emulation support for the following integer instructions:
* Deliver A Random Number (darn)
As suggested by Michael, this uses a raw .long for specifying the
instruction word when using inline assembly to retain compatibility
with older binutils.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds emulation support for the following integer instructions:
* Multiply-Add High Doubleword (maddhd)
* Multiply-Add High Doubleword Unsigned (maddhdu)
* Multiply-Add Low Doubleword (maddld)
As suggested by Michael, this uses a raw .long for specifying the
instruction word when using inline assembly to retain compatibility
with older binutils.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
commit 137cd7100e
"ARM: dts: Enable Gemini flash access" contained a bug
by disabling the display controller, while the whole
idea with the patch was to enable flash access AND
the display controller, simultaneously. Fix it up.
Fixes: 137cd7100e ("ARM: dts: Enable Gemini flash access")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
According to the R-Car Gen3 Hardware Manual Errata for Rev 1.50 of Feb
12, 2019, the DMA channels for SCIF5 are corrected from 16..47 to 0..15
on R-Car E3.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Fixes: a5ebe5e49a ("arm64: dts: renesas: r8a77990: Add SCIF-{0,1,3,4,5} device nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
