The LS1028A SoC features a PCI Integrated Endpoint Root Complex
(IERC) defining several integrated PCI devices, including the ENETC
ethernet controller integrated endpoints (IEPs). The IERC implements
ECAM (Enhanced Configuration Access Mechanism) to provide access
to the PCIe config space of the IEPs. This means the the IEPs
(including ENETC) do not support the standard PCIe BARs, instead
the Enhanced Allocation (EA) capability structures in the ECAM space
are used to fix the base addresses in the system, and the PCI
subsystem uses these structures for device enumeration and discovery.
The "ranges" entries contain basic information from these EA capabily
structures required by the kernel for device enumeration.
The current patch also enables the first 2 ENETC PFs (Physiscal
Functions) and the associated VFs (Virtual Functions), 2 VFs for
each PF. Each of these ENETC PFs has an external ethernet port
on the LS1028A SoC.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The comments could not reflect the code, and it is easy to get
what this function does from a straight-line reading of the code.
So let's drop the comments
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Debug exception handlers may be called for exceptions generated both by
user and kernel code. In many cases, this is checked explicitly, but
in other cases things either happen to work by happy accident or they
go slightly wrong. For example, executing 'brk #4' from userspace will
enter the kprobes code and be ignored, but the instruction will be
retried forever in userspace instead of delivering a SIGTRAP.
Fix this issue in the most stable-friendly fashion by simply adding
explicit checks of the triggering exception level to all of our debug
exception handlers.
Cc: <stable@vger.kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
FAR_EL1 is UNKNOWN for all debug exceptions other than those caused by
taking a hardware watchpoint. Unfortunately, if a debug handler returns
a non-zero value, then we will propagate the UNKNOWN FAR value to
userspace via the si_addr field of the SIGTRAP siginfo_t.
Instead, let's set si_addr to take on the PC of the faulting instruction,
which we have available in the current pt_regs.
Cc: <stable@vger.kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The reset of the prefix to zero in swsusp_arch_resume uses a 4 byte stack
slot. With CONFIG_VMAP_STACK=y this is now in the vmalloc area, this works
only with DAT enabled. Move the DAT disable in swsusp_arch_resume after
the prefix reset.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sugaya Taichi <sugaya.taichi@socionext.com> explains:
Here is the series of patches the initial support for SC2000(M10V) of
Milbeaut SoCs. "M10V" is the internal name of SC2000, so commonly used in
source code.
SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for
computer vision. It also features advanced functionalities such as 360-degree,
real-time spherical stitching with multi cameras, image stabilization for
without mechanical gimbals, and rolling shutter correction. More detail is
below:
https://www.socionext.com/en/products/assp/milbeaut/SC2000.html
Specifications for developers are below:
- Quad-core 32bit Cortex-A7 on ARMv7-A architecture
- NEON support
- DSP
- GPU
- MAX 3GB DDR3
- Cortex-M0 for power control
- NAND Flash Interface
- SD UHS-I
- SD UHS-II
- SDIO
- USB2.0 HOST / Device
- USB3.0 HOST / Device
- PCI express Gen2
- Ethernet Engine
- I2C
- UART
- SPI
- PWM
Support is quite minimal for now, since it only includes timer, clock,
pictrl and serial controller drivers, so we can only boot to userspace
through initramfs. Support for the other peripherals will come eventually.
* milbeaut/newsoc:
ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V
ARM: configs: Add Milbeaut M10V defconfig
ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board
clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs
dt-bindings: timer: Add Milbeaut M10V timer description
ARM: milbeaut: Add basic support for Milbeaut m10v SoC
dt-bindings: Add documentation for Milbeaut SoCs
dt-bindings: arm: Add SMP enable-method for Milbeaut
dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram
Link: https://lore.kernel.org/linux-arm-kernel/1551243056-10521-1-git-send-email-sugaya.taichi@socionext.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts commit 0bd3ef34d2.
There is ongoing work on objtool to identify incorrect uses of
user_access_{begin,end}. Until this is sorted, do not enable the
functionality on arm64. Also, on ARMv8.2 CPUs with hardware PAN and UAO
support, there is no obvious performance benefit to the unsafe user
accessors.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add and enable the Milbeaut M10V architecture. These configs select those
of the clock, timer and serial driver for M10V.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds the minimal defconfig for the Milbeaut M10V.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds the basic M10V SoC support under arch/arm.
Since all cores are activated in the custom bootloader before booting
linux, it is necessary to wait for the secondary-cores using cpu-enable-
method and special sram.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The maximum voltage value for buck8 regulator on Odroid XU3/XU4 boards is
set too low. Increase it to the 2000mV as specified on the board schematic.
So far the board worked fine, because of the bug in the PMIC driver, which
used incorrect step value for that regulator. It interpreted the voltage
value set by the bootloader as 1225mV and kept it unchanged. The regulator
driver has been however fixed recently in the commit 56b5d4ea77
("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35"), what results
in reading the proper buck8 value and forcing it to 1500mV on boot. This
is not enough for proper board operation and results in eMMC errors during
heavy IO traffic. Increasing maximum voltage value for buck8 restores
original driver behavior and fixes eMMC issues.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 86a2d2ac5e ("ARM: dts: Add dts file for Odroid XU3 board")
Fixes: 56b5d4ea77 ("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This disables the old FBDEV driver and enables the PL111
DRM driver on the SPEAr3xx.
There are some device trees in the kernel that switches
the DT node for the PL110 to "okay" but none of these
have any display defined, so we can safely switch to this
driver before we get any users starting to define
displays. Let them do it on top of the new driver
infrastructure instead.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM64 Fixes for 5.0-rc8
* Fix TZ memory area size to avoid crashes during boot
* tag 'qcom-fixes-for-5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: qcom: msm8998: Extend TZ reserved memory area
This updates the NHK8815 defconfig to reflect the recent
structural changes in Kconfigs all over the kernel:
- PREEMPT option was moved around
- MODULES options were moved around
- MTD_NAND options were moved around
- INPUT_MOUSEDEV doesn't have to be explicitly unselected
anymore (not on by default)
- DEBUG_GPIO should really not be in any default config
- MMC_BLOCK_BOUNCE is gone from Kconfig
- CRYPTO options were moved around
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The CONFIG_SND_PXA2XX_AC97 driver is for the old AC97 bus implementation,
and conflicts with all the new-style AC97 drivers after the conversion,
so the drivers we want all get turned off.
Not disabling the symbol however does the right thing, and we get
the drivers that are selectively enabled here.
Fixes: 25540f68c8 ("ASoC: pxa: change ac97 dependencies")
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The recent commit got this test wrong, it declared the assembler
symbols the wrong way, and also used the wrong symbol name
(xxx_start rather than start_xxx, see asm/head-64.h).
Fixes: ccd477028a ("powerpc/64s: Fix HV NMI vs HV interrupt recoverability test")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a warning about removing required architecture level set facilities
via "facilities=" command line option.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add "facilities=" command line option which allows to override
facility bits returned by stfle. The main purpose of that is debugging
aids which allows to test specific kernel behaviour depending on
specific facilities presence. It also affects CPU alternatives.
"facilities=" command line option format is comma separated list of
integer values to be additionally set or cleared (if value is starting
with "!"). Values ranges are also supported. e.g.:
facilities=!130-160,159,167-169
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Facilities list in the lowcore is initially set up by verify_facilities
from als.c and later initializations are redundant, so cleaning them up.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reuse __stfle call instead of in-place implementation. __stfle is using
memcpy and memset functions but they are safe to use, since mem.S is
built with -march=z900.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add KVM_PPC_CPU_CHAR_BCCTR_FLUSH_ASSIST &
KVM_PPC_CPU_BEHAV_FLUSH_COUNT_CACHE to the characteristics returned
from the H_GET_CPU_CHARACTERISTICS H-CALL, as queried from either the
hypervisor or the device tree.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Pull MIPS fixes from Paul Burton:
"A few more MIPS fixes:
- Fix 16b cmpxchg() operations which could erroneously fail if bits
15:8 of the old value are non-zero. In practice I'm not aware of
any actual users of 16b cmpxchg() on MIPS, but this fixes the
support for it was was introduced in v4.13.
- Provide a struct device to dma_alloc_coherent for Lantiq XWAY
systems with a "Voice MIPS Macro Core" (VMMC) device.
- Provide DMA masks for BCM63xx ethernet devices, fixing a regression
introduced in v4.19.
- Fix memblock reservation for the kernel when the system has a
non-zero PHYS_OFFSET, correcting the memblock conversion performed
in v4.20"
* tag 'mips_fixes_5.0_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: fix memory setup for platforms with PHYS_OFFSET != 0
MIPS: BCM63XX: provide DMA masks for ethernet devices
MIPS: lantiq: pass struct device to DMA API functions
MIPS: fix truncation in __cmpxchg_small for short values
Building a preprocessed source file for arm64 now always produces
a warning with clang because of the page_to_virt() macro assigning
a variable to itself.
Adding a new temporary variable avoids this issue.
Fixes: 2813b9c029 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When ARCH_MXC get enabled, ARM64_ERRATUM_845719 will be selected and
this warning will happen when COMPAT isn't set.
WARNING: unmet direct dependencies detected for ARM64_ERRATUM_845719
Depends on [n]: COMPAT [=n]
Selected by [y]:
- ARCH_MXC [=y]
Rework to add 'if COMPAT' before ARM64_ERRATUM_845719 gets selected,
since ARM64_ERRATUM_845719 depends on COMPAT.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Ensure that inX() provides the same ordering guarantees as readX()
by hooking up __io_par() so that it maps directly to __iormb().
Reported-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The definitions of the __io_[p]ar() macros in asm-generic/io.h take the
value returned by the preceding I/O read as an argument so that
architectures can use this to create order with a subsequent delayX()
routine using a dependency.
Update the riscv barrier definitions to match, although the argument
is currently unused.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull crypto fixes from Herbert Xu:
"This fixes a compiler warning introduced by a previous fix, as well as
two crash bugs on ARM"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: sha512/arm - fix crash bug in Thumb2 build
crypto: sha256/arm - fix crash bug in Thumb2 build
crypto: ccree - add missing inline qualifier
On the Fujitsu-A64FX cores ver(1.0, 1.1), memory access may cause
an undefined fault (Data abort, DFSC=0b111111). This fault occurs under
a specific hardware condition when a load/store instruction performs an
address translation. Any load/store instruction, except non-fault access
including Armv8 and SVE might cause this undefined fault.
The TCR_ELx.NFD1 bit is used by the kernel when CONFIG_RANDOMIZE_BASE
is enabled to mitigate timing attacks against KASLR where the kernel
address space could be probed using the FFR and suppressed fault on
SVE loads.
Since this erratum causes spurious exceptions, which may corrupt
the exception registers, we clear the TCR_ELx.NFDx=1 bits when
booting on an affected CPU.
Signed-off-by: Zhang Lei <zhang.lei@jp.fujitsu.com>
[Generated MIDR value/mask for __cpu_setup(), removed spurious-fault handler
and always disabled the NFDx bits on affected CPUs]
Signed-off-by: James Morse <james.morse@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
If we have fixed user buffers, we can map them into the kernel when we
setup the io_uring. That avoids the need to do get_user_pages() for
each and every IO.
To utilize this feature, the application must call io_uring_register()
after having setup an io_uring instance, passing in
IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to
an iovec array, and the nr_args should contain how many iovecs the
application wishes to map.
If successful, these buffers are now mapped into the kernel, eligible
for IO. To use these fixed buffers, the application must use the
IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then
set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len
must point to somewhere inside the indexed buffer.
The application may register buffers throughout the lifetime of the
io_uring instance. It can call io_uring_register() with
IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of
buffers, and then register a new set. The application need not
unregister buffers explicitly before shutting down the io_uring
instance.
It's perfectly valid to setup a larger buffer, and then sometimes only
use parts of it for an IO. As long as the range is within the originally
mapped region, it will work just fine.
For now, buffers must not be file backed. If file backed buffers are
passed in, the registration will fail with -1/EOPNOTSUPP. This
restriction may be relaxed in the future.
RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat
arbitrary 1G per buffer size is also imposed.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.
IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.
Two new system calls are added for this:
io_uring_setup(entries, params)
Sets up an io_uring instance for doing async IO. On success,
returns a file descriptor that the application can mmap to
gain access to the SQ ring, CQ ring, and io_uring_sqes.
io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
Initiates IO against the rings mapped to this fd, or waits for
them to complete, or both. The behavior is controlled by the
parameters passed in. If 'to_submit' is non-zero, then we'll
try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
kernel will wait for 'min_complete' events, if they aren't
already available. It's valid to set IORING_ENTER_GETEVENTS
and 'min_complete' == 0 at the same time, this allows the
kernel to return already completed events without waiting
for them. This is useful only for polling, as for IRQ
driven IO, the application can just check the CQ ring
without entering the kernel.
With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.
For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.
Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.
Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ASoC: More changes for v5.1
Another batch of changes for ASoC, no big core changes - it's mainly
small fixes and improvements for individual drivers.
- A big refresh and cleanup of the Samsung drivers, fixing a number of
issues which allow the driver to be used with a wider range of
userspaces.
- Fixes for the Intel drivers to make them more standard so less likely
to get bitten by core issues.
- New driver for Cirrus Logic CS35L26.
From networking side, there are numerous attempts to get rid of indirect
calls in fast-path wherever feasible in order to avoid the cost of
retpolines, for example, just to name a few:
* 283c16a2df ("indirect call wrappers: helpers to speed-up indirect calls of builtin")
* aaa5d90b39 ("net: use indirect call wrappers at GRO network layer")
* 028e0a4766 ("net: use indirect call wrappers at GRO transport layer")
* 356da6d0cd ("dma-mapping: bypass indirect calls for dma-direct")
* 09772d92cd ("bpf: avoid retpoline for lookup/update/delete calls on maps")
* 10870dd89e ("netfilter: nf_tables: add direct calls for all builtin expressions")
[...]
Recent work on XDP from Björn and Magnus additionally found that manually
transforming the XDP return code switch statement with more than 5 cases
into if-else combination would result in a considerable speedup in XDP
layer due to avoidance of indirect calls in CONFIG_RETPOLINE enabled
builds. On i40e driver with XDP prog attached, a 20-26% speedup has been
observed [0]. Aside from XDP, there are many other places later in the
networking stack's critical path with similar switch-case
processing. Rather than fixing every XDP-enabled driver and locations in
stack by hand, it would be good to instead raise the limit where gcc would
emit expensive indirect calls from the switch under retpolines and stick
with the default as-is in case of !retpoline configured kernels. This would
also have the advantage that for archs where this is not necessary, we let
compiler select the underlying target optimization for these constructs and
avoid potential slow-downs by if-else hand-rewrite.
In case of gcc, this setting is controlled by case-values-threshold which
has an architecture global default that selects 4 or 5 (latter if target
does not have a case insn that compares the bounds) where some arch back
ends like arm64 or s390 override it with their own target hooks, for
example, in gcc commit db7a90aa0de5 ("S/390: Disable prediction of indirect
branches") the threshold pretty much disables jump tables by limit of 20
under retpoline builds. Comparing gcc's and clang's default code
generation on x86-64 under O2 level with retpoline build results in the
following outcome for 5 switch cases:
* gcc with -mindirect-branch=thunk-inline -mindirect-branch-register:
# gdb -batch -ex 'disassemble dispatch' ./c-switch
Dump of assembler code for function dispatch:
0x0000000000400be0 <+0>: cmp $0x4,%edi
0x0000000000400be3 <+3>: ja 0x400c35 <dispatch+85>
0x0000000000400be5 <+5>: lea 0x915f8(%rip),%rdx # 0x4921e4
0x0000000000400bec <+12>: mov %edi,%edi
0x0000000000400bee <+14>: movslq (%rdx,%rdi,4),%rax
0x0000000000400bf2 <+18>: add %rdx,%rax
0x0000000000400bf5 <+21>: callq 0x400c01 <dispatch+33>
0x0000000000400bfa <+26>: pause
0x0000000000400bfc <+28>: lfence
0x0000000000400bff <+31>: jmp 0x400bfa <dispatch+26>
0x0000000000400c01 <+33>: mov %rax,(%rsp)
0x0000000000400c05 <+37>: retq
0x0000000000400c06 <+38>: nopw %cs:0x0(%rax,%rax,1)
0x0000000000400c10 <+48>: jmpq 0x400c90 <fn_3>
0x0000000000400c15 <+53>: nopl (%rax)
0x0000000000400c18 <+56>: jmpq 0x400c70 <fn_2>
0x0000000000400c1d <+61>: nopl (%rax)
0x0000000000400c20 <+64>: jmpq 0x400c50 <fn_1>
0x0000000000400c25 <+69>: nopl (%rax)
0x0000000000400c28 <+72>: jmpq 0x400c40 <fn_0>
0x0000000000400c2d <+77>: nopl (%rax)
0x0000000000400c30 <+80>: jmpq 0x400cb0 <fn_4>
0x0000000000400c35 <+85>: push %rax
0x0000000000400c36 <+86>: callq 0x40dd80 <abort>
End of assembler dump.
* clang with -mretpoline emitting search tree:
# gdb -batch -ex 'disassemble dispatch' ./c-switch
Dump of assembler code for function dispatch:
0x0000000000400b30 <+0>: cmp $0x1,%edi
0x0000000000400b33 <+3>: jle 0x400b44 <dispatch+20>
0x0000000000400b35 <+5>: cmp $0x2,%edi
0x0000000000400b38 <+8>: je 0x400b4d <dispatch+29>
0x0000000000400b3a <+10>: cmp $0x3,%edi
0x0000000000400b3d <+13>: jne 0x400b52 <dispatch+34>
0x0000000000400b3f <+15>: jmpq 0x400c50 <fn_3>
0x0000000000400b44 <+20>: test %edi,%edi
0x0000000000400b46 <+22>: jne 0x400b5c <dispatch+44>
0x0000000000400b48 <+24>: jmpq 0x400c20 <fn_0>
0x0000000000400b4d <+29>: jmpq 0x400c40 <fn_2>
0x0000000000400b52 <+34>: cmp $0x4,%edi
0x0000000000400b55 <+37>: jne 0x400b66 <dispatch+54>
0x0000000000400b57 <+39>: jmpq 0x400c60 <fn_4>
0x0000000000400b5c <+44>: cmp $0x1,%edi
0x0000000000400b5f <+47>: jne 0x400b66 <dispatch+54>
0x0000000000400b61 <+49>: jmpq 0x400c30 <fn_1>
0x0000000000400b66 <+54>: push %rax
0x0000000000400b67 <+55>: callq 0x40dd20 <abort>
End of assembler dump.
For sake of comparison, clang without -mretpoline:
# gdb -batch -ex 'disassemble dispatch' ./c-switch
Dump of assembler code for function dispatch:
0x0000000000400b30 <+0>: cmp $0x4,%edi
0x0000000000400b33 <+3>: ja 0x400b57 <dispatch+39>
0x0000000000400b35 <+5>: mov %edi,%eax
0x0000000000400b37 <+7>: jmpq *0x492148(,%rax,8)
0x0000000000400b3e <+14>: jmpq 0x400bf0 <fn_0>
0x0000000000400b43 <+19>: jmpq 0x400c30 <fn_4>
0x0000000000400b48 <+24>: jmpq 0x400c10 <fn_2>
0x0000000000400b4d <+29>: jmpq 0x400c20 <fn_3>
0x0000000000400b52 <+34>: jmpq 0x400c00 <fn_1>
0x0000000000400b57 <+39>: push %rax
0x0000000000400b58 <+40>: callq 0x40dcf0 <abort>
End of assembler dump.
Raising the cases to a high number (e.g. 100) will still result in similar
code generation pattern with clang and gcc as above, in other words clang
generally turns off jump table emission by having an extra expansion pass
under retpoline build to turn indirectbr instructions from their IR into
switch instructions as a built-in -mno-jump-table lowering of a switch (in
this case, even if IR input already contained an indirect branch).
For gcc, adding --param=case-values-threshold=20 as in similar fashion as
s390 in order to raise the limit for x86 retpoline enabled builds results
in a small vmlinux size increase of only 0.13% (before=18,027,528
after=18,051,192). For clang this option is ignored due to i) not being
needed as mentioned and ii) not having above cmdline
parameter. Non-retpoline-enabled builds with gcc continue to use the
default case-values-threshold setting, so nothing changes here.
[0] https://lore.kernel.org/netdev/20190129095754.9390-1-bjorn.topel@gmail.com/
and "The Path to DPDK Speeds for AF_XDP", LPC 2018, networking track:
- http://vger.kernel.org/lpc_net2018_talks/lpc18_pres_af_xdp_perf-v3.pdf
- http://vger.kernel.org/lpc_net2018_talks/lpc18_paper_af_xdp_perf-v2.pdf
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: netdev@vger.kernel.org
Cc: David S. Miller <davem@davemloft.net>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20190221221941.29358-1-daniel@iogearbox.net
Hyper-V doesn't provide irq remapping for IO-APIC. To enable x2apic,
set x2apic destination mode to physcial mode when x2apic is available
and Hyper-V IOMMU driver makes sure cpus assigned with IO-APIC irqs have
8-bit APIC id.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make kernfs support superblock creation/mount/remount with fs_context.
This requires that sysfs, cgroup and intel_rdt, which are built on kernfs,
be made to support fs_context also.
Notes:
(1) A kernfs_fs_context struct is created to wrap fs_context and the
kernfs mount parameters are moved in here (or are in fs_context).
(2) kernfs_mount{,_ns}() are made into kernfs_get_tree(). The extra
namespace tag parameter is passed in the context if desired
(3) kernfs_free_fs_context() is provided as a destructor for the
kernfs_fs_context struct, but for the moment it does nothing except
get called in the right places.
(4) sysfs doesn't wrap kernfs_fs_context since it has no parameters to
pass, but possibly this should be done anyway in case someone wants to
add a parameter in future.
(5) A cgroup_fs_context struct is created to wrap kernfs_fs_context and
the cgroup v1 and v2 mount parameters are all moved there.
(6) cgroup1 parameter parsing error messages are now handled by invalf(),
which allows userspace to collect them directly.
(7) cgroup1 parameter cleanup is now done in the context destructor rather
than in the mount/get_tree and remount functions.
Weirdies:
(*) cgroup_do_get_tree() calls cset_cgroup_from_root() with locks held,
but then uses the resulting pointer after dropping the locks. I'm
told this is okay and needs commenting.
(*) The cgroup refcount web. This really needs documenting.
(*) cgroup2 only has one root?
Add a suggestion from Thomas Gleixner in which the RDT enablement code is
placed into its own function.
[folded a leak fix from Andrey Vagin]
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Tejun Heo <tj@kernel.org>
cc: Li Zefan <lizefan@huawei.com>
cc: Johannes Weiner <hannes@cmpxchg.org>
cc: cgroups@vger.kernel.org
cc: fenghua.yu@intel.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf annotate:
Wei Li:
- Fix getting source line failure
perf script:
Andi Kleen:
- Handle missing fields with -F +...
perf data:
Jiri Olsa:
- Prep work to support per-cpu files in a directory.
Intel PT:
Adrian Hunter:
- Improve thread_stack__no_call_return()
- Hide x86 retpolines in thread stacks.
- exported SQL viewer refactorings, new 'top calls' report..
Alexander Shishkin:
- Copy parent's address filter offsets on clone
- Fix address filters for vmas with non-zero offset. Applies to
ARM's CoreSight as well.
python scripts:
Tony Jones:
- Python3 support for several 'perf script' python scripts.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On big endian arm64 kernels, the xchacha20-neon and xchacha12-neon
self-tests fail because hchacha_block_neon() outputs little endian words
but the C code expects native endianness. Fix it to output the words in
native endianness (which also makes it match the arm32 version).
Fixes: cc7cf991e9 ("crypto: arm64/chacha20 - add XChaCha20 support")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The change to encrypt a fifth ChaCha block using scalar instructions
caused the chacha20-neon, xchacha20-neon, and xchacha12-neon self-tests
to start failing on big endian arm64 kernels. The bug is that the
keystream block produced in 32-bit scalar registers is directly XOR'd
with the data words, which are loaded and stored in native endianness.
Thus in big endian mode the data bytes end up XOR'd with the wrong
bytes. Fix it by byte-swapping the keystream words in big endian mode.
Fixes: 2fe55987b2 ("crypto: arm64/chacha - use combined SIMD/ALU routine for more speed")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1-block SSE2 variant of poly1305 stores variables s1..s4 containing key
material on the stack. This commit adds missing zeroing of the stack
memory. Benchmarks show negligible performance hit (tested on i7-3770).
Signed-off-by: Tommi Hirvola <tommi@hirvola.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We store 2 multilevel tables in iommu_table - one for the hardware and
one with the corresponding userspace addresses. Before allocating
the tables, the iommu_table_group_ops::get_table_size() hook returns
the combined size of the two and VFIO SPAPR TCE IOMMU driver adjusts
the locked_vm counter correctly. When the table is actually allocated,
the amount of allocated memory is stored in iommu_table::it_allocated_size
and used to decrement the locked_vm counter when we release the memory
used by the table; .get_table_size() and .create_table() calculate it
independently but the result is expected to be the same.
However the allocator does not add the userspace table size to
.it_allocated_size so when we destroy the table because of VFIO PCI
unplug (i.e. VFIO container is gone but the userspace keeps running),
we decrement locked_vm by just a half of size of memory we are
releasing.
To make things worse, since we enabled on-demand allocation of
indirect levels, it_allocated_size contains only the amount of memory
actually allocated at the table creation time which can just be a
fraction. It is not a problem with incrementing locked_vm (as
get_table_size() value is used) but it is with decrementing.
As the result, we leak locked_vm and may not be able to allocate more
IOMMU tables after few iterations of hotplug/unplug.
This sets it_allocated_size in the pnv_pci_ioda2_ops::create_table()
hook to what pnv_pci_ioda2_get_table_size() returns so from now on we
have a single place which calculates the maximum memory a table can
occupy. The original meaning of it_allocated_size is somewhat lost now
though.
We do not ditch it_allocated_size whatsoever here and we do not call
get_table_size() from vfio_iommu_spapr_tce.c when decrementing
locked_vm as we may have multiple IOMMU groups per container and even
though they all are supposed to have the same get_table_size()
implementation, there is a small chance for failure or confusion.
Fixes: 090bad39b2 ("powerpc/powernv: Add indirect levels to it_userspace")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull additional syscall ABI cleanup for y2038 from Arnd Bergmann:
This is a follow-up to the y2038 syscall patches already merged in the tip
tree. As the final 32-bit RISC-V syscall ABI is still being decided on,
this is the last chance to make a few corrections to leave out interfaces
based on 32-bit time_t along with the old off_t and rlimit types.
The series achieves this in a few steps:
- A couple of bug fixes for minor regressions I introduced
in the original series
- A couple of older patches from Yury Norov that I had never
merged in the past, these fix up the openat/open_by_handle_at and
getrlimit/setrlimit syscalls to disallow the old versions of off_t
and rlimit.
- Hiding the deprecated system calls behind an #ifdef in
include/uapi/asm-generic/unistd.h
- Change arch/riscv to drop all these ABIs.
Originally, the plan was to also leave these out on C-Sky, but that now
has a glibc port that uses the older interfaces, so we need to leave
them in place.
The commit identified below adds MC_BTB_FLUSH macro only when
CONFIG_PPC_FSL_BOOK3E is defined. This results in the following error
on some configs (seen several times with kisskb randconfig_defconfig)
arch/powerpc/kernel/exceptions-64e.S:576: Error: Unrecognized opcode: `mc_btb_flush'
make[3]: *** [scripts/Makefile.build:367: arch/powerpc/kernel/exceptions-64e.o] Error 1
make[2]: *** [scripts/Makefile.build:492: arch/powerpc/kernel] Error 2
make[1]: *** [Makefile:1043: arch/powerpc] Error 2
make: *** [Makefile:152: sub-make] Error 2
This patch adds a blank definition of MC_BTB_FLUSH for other cases.
Fixes: 10c5e83afd ("powerpc/fsl: Flush the branch predictor at each kernel entry (64bit)")
Cc: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
