In preparation of introducing a set of crypto library interfaces, tidy
up the Makefile and split off the Kconfig symbols into a separate file.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If aead is built as a module along with cryptomgr, it creates a
dependency loop due to the dependency chain aead => crypto_null =>
cryptomgr => aead.
This is due to the presence of the AEAD geniv code. This code is
not really part of the AEAD API but simply support code for IV
generators such as seqiv. This patch moves the geniv code into
its own module thus breaking the dependency loop.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API requires cryptomgr to be present for probing to work
so we need a softdep to ensure that cryptomgr is added to the
initramfs.
This was usually not a problem because until very recently it was
not practical to build crypto API as module but with the recent
work to eliminate direct AES users this is now possible.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixed 2 copy-paste mistakes in the commit mentioned below that caused
authenc w/ (3)DES to consistently fail on Macchiatobin (but strangely
work fine on x86+FPGA??).
Now fully tested on both platforms.
Fixes: 13a1bb93f7 ("crypto: inside-secure - Fixed warnings...")
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reverts commit 03a3bb7ae6 ("hwrng: core - Freeze khwrng
thread during suspend"), ff296293b3 ("random: Support freezable
kthreads in add_hwgenerator_randomness()") and 59b569480d ("random:
Use wait_event_freezable() in add_hwgenerator_randomness()").
These patches introduced regressions and we need more time to
get them ready for mainline.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently the VF can be enabled only through sysfs interface
after module loaded, but this also needs to be done when the
module loaded in some scenarios.
This patch adds module param vfs_num, adds hisi_zip_sriov_enable()
in probe, and also adjusts the position of probe.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixed mask used for CFSIZE and RFSIZE fields of HIA_OPTIONS register,
these were all 1 bit too wide. Which caused the probing of a standard
EIP97 to actually hang due to assume way too large descriptor FIFO's.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull x86 fixes from Ingo Molnar:
"Two fixes: disable unreliable HPET on Intel Coffe Lake platforms, and
fix a lockdep splat in the resctrl code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Fix potential lockdep warning
x86/quirks: Disable HPET on Intel Coffe Lake platforms
Pull perf fixes from Ingo Molnar:
"Misc fixes: a handful of AUX event handling related fixes, a Sparse
fix and two ABI fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix missing static inline on perf_cgroup_switch()
perf/core: Consistently fail fork on allocation failures
perf/aux: Disallow aux_output for kernel events
perf/core: Reattach a misplaced comment
perf/aux: Fix the aux_output group inheritance fix
perf/core: Disallow uncore-cgroup events
Pull networking fixes from David Miller:
1) Fix memory leak in xfrm_state code, from Steffen Klassert.
2) Fix races between devlink reload operations and device
setup/cleanup, from Jiri Pirko.
3) Null deref in NFC code, from Stephan Gerhold.
4) Refcount fixes in SMC, from Ursula Braun.
5) Memory leak in slcan open error paths, from Jouni Hogander.
6) Fix ETS bandwidth validation in hns3, from Yonglong Liu.
7) Info leak on short USB request answers in ax88172a driver, from
Oliver Neukum.
8) Release mem region properly in ep93xx_eth, from Chuhong Yuan.
9) PTP config timestamp flags validation, from Richard Cochran.
10) Dangling pointers after SKB data realloc in seg6, from Andrea Mayer.
11) Missing free_netdev() in gemini driver, from Chuhong Yuan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
ipmr: Fix skb headroom in ipmr_get_route().
net: hns3: cleanup of stray struct hns3_link_mode_mapping
net/smc: fix fastopen for non-blocking connect()
rds: ib: update WR sizes when bringing up connection
net: gemini: add missed free_netdev
net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid
seg6: fix skb transport_header after decap_and_validate()
seg6: fix srh pointer in get_srh()
net: stmmac: Use the correct style for SPDX License Identifier
octeontx2-af: Use the correct style for SPDX License Identifier
ptp: Extend the test program to check the external time stamp flags.
mlx5: Reject requests to enable time stamping on both edges.
igb: Reject requests that fail to enable time stamping on both edges.
dp83640: Reject requests to enable time stamping on both edges.
mv88e6xxx: Reject requests to enable time stamping on both edges.
ptp: Introduce strict checking of external time stamp options.
renesas: reject unsupported external timestamp flags
mlx5: reject unsupported external timestamp flags
igb: reject unsupported external timestamp flags
dp83640: reject unsupported external timestamp flags
...
Two OP-TE driver fixes:
- Add proper cleanup on optee_enumerate_devices() failure
- Make sure to register kernel allocations of dynamic shared memory
* tag 'tee-fixes-for-v5.4' of git://git.linaro.org/people/jens.wiklander/linux-tee: (591 commits)
tee: optee: fix device enumeration error handling
tee: optee: Fix dynamic shm pool allocations
Linux 5.4-rc3
tracing: Initialize iter->seq after zeroing in tracing_read_pipe()
tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency
tracing/hwlat: Report total time spent in all NMIs during the sample
recordmcount: Fix nop_mcount() function
tracing: Do not create tracefs files if tracefs lockdown is in effect
tracing: Add locked_down checks to the open calls of files created for tracefs
tracing: Add tracing_check_open_get_tr()
tracing: Have trace events system open call tracing_open_generic_tr()
tracing: Get trace_array reference for available_tracers files
ftrace: Get a reference counter for the trace_array on filter files
tracefs: Revert ccbd54ff54 ("tracefs: Restrict tracefs when the kernel is locked down")
perf/x86/cstate: Add Tiger Lake CPU support
perf/x86/msr: Add Tiger Lake CPU support
perf/x86/intel: Add Tiger Lake CPU support
perf/x86/cstate: Update C-state counters for Ice Lake
perf/x86/msr: Add new CPU model numbers for Ice Lake
perf/x86/cstate: Add Comet Lake CPU support
...
Link: https://lore.kernel.org/r/20191115105353.GA26176@jax
Signed-off-by: Olof Johansson <olof@lixom.net>
ASPEED device tree updates for 5.5
This adds recently merged drivers to the aspeed g4 and g5 defconfigs,
and to the multi v5 and v7 shared defconfigs.
* tag 'aspeed-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: config: multi_v5: ASPEED SDHCI, SGPIO
ARM: configs: multi_v7: ASPEED network, gpio, FSI
ARM: config: aspeed-g4: Add MMC, and cleanup
ARM: config: aspeed-g5: Add SGPIO and FSI drivers
ARM: config: aspeed-g5: Enable 8250_DW quirks
Link: https://lore.kernel.org/r/CACPK8Xc3a=6irkTSfwyPrr=nWv_fa9nMxthtC2AyqFJEWvuMwg@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
ARM SCMI fix for v5.5
Just a single fix to correct the SCMI fast channel doorbell ring logic
when CONFIG_64BIT is not set.
* tag 'scmi-fix-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
Link: https://lore.kernel.org/r/20191114164555.GA19398@bogus
Signed-off-by: Olof Johansson <olof@lixom.net>
tcp_mmap is used as a reference program for TCP rx zerocopy,
so it is important to point out some potential issues.
If multiple threads are concurrently using getsockopt(...
TCP_ZEROCOPY_RECEIVE), there is a chance the low-level mm
functions compete on shared ptl lock, if vma are arbitrary placed.
Instead of letting the mm layer place the chunks back to back,
this patch enforces an alignment so that each thread uses
a different ptl lock.
Performance measured on a 100 Gbit NIC, with 8 tcp_mmap clients
launched at the same time :
$ for f in {1..8}; do ./tcp_mmap -H 2002:a05:6608:290:: & done
In the following run, we reproduce the old behavior by requesting no alignment :
$ tcp_mmap -sz -C $((128*1024)) -a 4096
received 32768 MB (100 % mmap'ed) in 9.69532 s, 28.3516 Gbit
cpu usage user:0.08634 sys:3.86258, 120.511 usec per MB, 171839 c-switches
received 32768 MB (100 % mmap'ed) in 25.4719 s, 10.7914 Gbit
cpu usage user:0.055268 sys:21.5633, 659.745 usec per MB, 9065 c-switches
received 32768 MB (100 % mmap'ed) in 28.5419 s, 9.63069 Gbit
cpu usage user:0.057401 sys:23.8761, 730.392 usec per MB, 14987 c-switches
received 32768 MB (100 % mmap'ed) in 28.655 s, 9.59268 Gbit
cpu usage user:0.059689 sys:23.8087, 728.406 usec per MB, 18509 c-switches
received 32768 MB (100 % mmap'ed) in 28.7808 s, 9.55074 Gbit
cpu usage user:0.066042 sys:23.4632, 718.056 usec per MB, 24702 c-switches
received 32768 MB (100 % mmap'ed) in 28.8259 s, 9.5358 Gbit
cpu usage user:0.056547 sys:23.6628, 723.858 usec per MB, 23518 c-switches
received 32768 MB (100 % mmap'ed) in 28.8808 s, 9.51767 Gbit
cpu usage user:0.059357 sys:23.8515, 729.703 usec per MB, 14691 c-switches
received 32768 MB (100 % mmap'ed) in 28.8879 s, 9.51534 Gbit
cpu usage user:0.047115 sys:23.7349, 725.769 usec per MB, 21773 c-switches
New behavior (automatic alignment based on Hugepagesize),
we can see the system overhead being dramatically reduced.
$ tcp_mmap -sz -C $((128*1024))
received 32768 MB (100 % mmap'ed) in 13.5339 s, 20.3103 Gbit
cpu usage user:0.122644 sys:3.4125, 107.884 usec per MB, 168567 c-switches
received 32768 MB (100 % mmap'ed) in 16.0335 s, 17.1439 Gbit
cpu usage user:0.132428 sys:3.55752, 112.608 usec per MB, 188557 c-switches
received 32768 MB (100 % mmap'ed) in 17.5506 s, 15.6621 Gbit
cpu usage user:0.155405 sys:3.24889, 103.891 usec per MB, 226652 c-switches
received 32768 MB (100 % mmap'ed) in 19.1924 s, 14.3222 Gbit
cpu usage user:0.135352 sys:3.35583, 106.542 usec per MB, 207404 c-switches
received 32768 MB (100 % mmap'ed) in 22.3649 s, 12.2906 Gbit
cpu usage user:0.142429 sys:3.53187, 112.131 usec per MB, 250225 c-switches
received 32768 MB (100 % mmap'ed) in 22.5336 s, 12.1986 Gbit
cpu usage user:0.140654 sys:3.61971, 114.757 usec per MB, 253754 c-switches
received 32768 MB (100 % mmap'ed) in 22.5483 s, 12.1906 Gbit
cpu usage user:0.134035 sys:3.55952, 112.718 usec per MB, 252997 c-switches
received 32768 MB (100 % mmap'ed) in 22.6442 s, 12.139 Gbit
cpu usage user:0.126173 sys:3.71251, 117.147 usec per MB, 253728 c-switches
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Load Realtek-provided firmware for RTL8168fp/RTL8117. Unlike the
firmware for other chip versions which is for the PHY, firmware for
RTL8168fp/RTL8117 is for the MAC.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using constant MII_EXPANSION is misleading here because register 0x06
has a different meaning on page 0x0005. Here a proprietary PHY
parameter is read by writing the parameter id to register 0x05 on page
0x0005, followed by reading the parameter value from register 0x06.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In route.c, inet_rtm_getroute_build_skb() creates an skb with no
headroom. This skb is then used by inet_rtm_getroute() which may pass
it to rt_fill_info() and, from there, to ipmr_get_route(). The later
might try to reuse this skb by cloning it and prepending an IPv4
header. But since the original skb has no headroom, skb_push() triggers
skb_under_panic():
skbuff: skb_under_panic: text:00000000ca46ad8a len:80 put:20 head:00000000cd28494e data:000000009366fd6b tail:0x3c end:0xec0 dev:veth0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:108!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 6 PID: 587 Comm: ip Not tainted 5.4.0-rc6+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
RIP: 0010:skb_panic+0xbf/0xd0
Code: 41 a2 ff 8b 4b 70 4c 8b 4d d0 48 c7 c7 20 76 f5 8b 44 8b 45 bc 48 8b 55 c0 48 8b 75 c8 41 54 41 57 41 56 41 55 e8 75 dc 7a ff <0f> 0b 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00
RSP: 0018:ffff888059ddf0b0 EFLAGS: 00010286
RAX: 0000000000000086 RBX: ffff888060a315c0 RCX: ffffffff8abe4822
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88806c9a79cc
RBP: ffff888059ddf118 R08: ffffed100d9361b1 R09: ffffed100d9361b0
R10: ffff88805c68aee3 R11: ffffed100d9361b1 R12: ffff88805d218000
R13: ffff88805c689fec R14: 000000000000003c R15: 0000000000000ec0
FS: 00007f6af184b700(0000) GS:ffff88806c980000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc8204a000 CR3: 0000000057b40006 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
skb_push+0x7e/0x80
ipmr_get_route+0x459/0x6fa
rt_fill_info+0x692/0x9f0
inet_rtm_getroute+0xd26/0xf20
rtnetlink_rcv_msg+0x45d/0x630
netlink_rcv_skb+0x1a5/0x220
rtnetlink_rcv+0x15/0x20
netlink_unicast+0x305/0x3a0
netlink_sendmsg+0x575/0x730
sock_sendmsg+0xb5/0xc0
___sys_sendmsg+0x497/0x4f0
__sys_sendmsg+0xcb/0x150
__x64_sys_sendmsg+0x48/0x50
do_syscall_64+0xd2/0xac0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Actually the original skb used to have enough headroom, but the
reserve_skb() call was lost with the introduction of
inet_rtm_getroute_build_skb() by commit 404eb77ea7 ("ipv4: support
sport, dport and ip_proto in RTM_GETROUTE").
We could reserve some headroom again in inet_rtm_getroute_build_skb(),
but this function shouldn't be responsible for handling the special
case of ipmr_get_route(). Let's handle that directly in
ipmr_get_route() by calling skb_realloc_headroom() instead of
skb_clone().
Fixes: 404eb77ea7 ("ipv4: support sport, dport and ip_proto in RTM_GETROUTE")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kalle Valo says:
====================
wireless-drivers-next patches for v5.5
Second set of patches for v5.5. Nothing special this time, smaller
features to various drivers and of course fixes all over.
Major changes:
iwlwifi
* update scan FW API
* bump the supported FW API version
* add debug dump collection on assert in WoWLAN
* enable adaptive dwell on P2P interfaces
ath10k
* request for PM_QOS_CPU_DMA_LATENCY to improve firmware initialisation time
qtnfmac
* add support for getting/setting transmit power
* handle MIC failure event from firmware
rtl8xxxu
* add support for Edimax EW-7611ULB
wil6210
* add SPDX license identifiers
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch cleans-up the stray left over code. It has no
functionality impact.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
FASTOPEN does not work with SMC-sockets. Since SMC allows fallback to
TCP native during connection start, the FASTOPEN setsockopts trigger
this fallback, if the SMC-socket is still in state SMC_INIT.
But if a FASTOPEN setsockopt is called after a non-blocking connect(),
this is broken, and fallback does not make sense.
This change complements
commit cd2063604e ("net/smc: avoid fallback in case of non-blocking connect")
and fixes the syzbot reported problem "WARNING in smc_unhash_sk".
Reported-by: syzbot+8488cc4cf1c9e09b8b86@syzkaller.appspotmail.com
Fixes: e1bbdd5704 ("net/smc: reduce sock_put() for fallback sockets")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A bonding with layer2+3 or layer3+4 hashing uses the IP addresses and the ports
to balance packets between slaves. With some network errors, we receive an ICMP
error packet by the remote host or a router. If sent by a router, the source IP
can differ from the remote host one. Additionally the ICMP protocol has no port
numbers, so a layer3+4 bonding will get a different hash than the previous one.
These two conditions could let the packet go through a different interface than
the other packets of the same flow:
# tcpdump -qltnni veth0 |sed 's/^/0: /' &
# tcpdump -qltnni veth1 |sed 's/^/1: /' &
# hping3 -2 192.168.0.2 -p 9
0: IP 192.168.0.1.2251 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
1: IP 192.168.0.1.2252 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
1: IP 192.168.0.1.2253 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
0: IP 192.168.0.1.2254 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
An ICMP error packet contains the header of the packet which caused the network
error, so inspect it and match the flow against it, so we can send the ICMP via
the same interface of the previous packet in the flow.
Move the IP and port dissect code into a generic function bond_flow_ip() and if
we are dissecting an ICMP error packet, call it again with the adjusted offset.
# hping3 -2 192.168.0.2 -p 9
1: IP 192.168.0.1.1224 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
1: IP 192.168.0.1.1225 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
0: IP 192.168.0.1.1226 > 192.168.0.2.9: UDP, length 0
0: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
0: IP 192.168.0.1.1227 > 192.168.0.2.9: UDP, length 0
0: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit 0c65b2b90d ("net: of_get_phy_mode: Change API to solve
int/unit warnings") updated the function of_get_phy_mode declaration.
Now it returns an error code and in case the node doesn't contain the
property 'phy-mode' or 'phy-connection-type' it returns -EINVAL and would
set the phy_interface_t to PHY_INTERFACE_MODE_NA.
Ocelot VSC7514 has 4 internal phys which have the phy interface
PHY_INTERFACE_MODE_NA. So because of_get_phy_mode would assign
PHY_INTERFACE_MODE_NA to phy_mode when there is an error, there is no need
to add the error check.
Updates for v2:
- drop error check because of_get_phy_mode already assigns phy_interface
to PHY_INTERFACE_MODE in case of error.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 78d3fd0b7d ("gro: Only use skb_gro_header for completely
non-linear packets") back in May'09 (v2.6.31-rc1) has changed the
original condition '!skb_headlen(skb)' to
'skb->mac_header == skb->tail' in gro_reset_offset() saying: "Since
the drivers that need this optimisation all provide completely
non-linear packets" (note that this condition has become the current
'skb_mac_header(skb) == skb_tail_pointer(skb)' later with commmit
ced14f6804 ("net: Correct comparisons and calculations using
skb->tail and skb-transport_header") without any functional changes).
For now, we have the following rough statistics for v5.4-rc7:
1) napi_gro_frags: 14
2) napi_gro_receive with skb->head containing (most of) payload: 83
3) napi_gro_receive with skb->head containing all the headers: 20
4) napi_gro_receive with skb->head containing only Ethernet header: 2
With the current condition, fast GRO with the usage of
NAPI_GRO_CB(skb)->frag0 is available only in the [1] case.
Packets pushed by [2] and [3] go through the 'slow' path, but
it's not a problem for them as they already contain all the needed
headers in skb->head, so pskb_may_pull() only moves skb->data.
The layout of skbs in the fourth [4] case at the moment of
dev_gro_receive() is identical to skbs that have come through [1],
as napi_frags_skb() pulls Ethernet header to skb->head. The only
difference is that the mentioned condition is always false for them,
because skb_put() and friends irreversibly alter the tail pointer.
They also go through the 'slow' path, but now every single
pskb_may_pull() in every single .gro_receive() will call the *really*
slow __pskb_pull_tail() to pull headers to head. This significantly
decreases the overall performance for no visible reasons.
The only two users of method [4] is:
* drivers/staging/qlge
* drivers/net/wireless/iwlwifi (all three variants: dvm, mvm, mvm-mq)
Note that in case with wireless drivers we can't use [1]
(napi_gro_frags()) at least for now and mac80211 stack always
performs pushes and pulls anyways, so performance hit is inavoidable.
At the moment of v2.6.31 the mentioned change was necessary (that's
why I don't add the "Fixes:" tag), but it became obsolete since
skb_gro_mac_header() has gone in commit a50e233c50 ("net-gro:
restore frag0 optimization"), so we can simply revert the condition
in gro_reset_offset() to allow skbs from [4] go through the 'fast'
path just like in case [1].
This was tested on a 600 MHz MIPS CPU and a custom driver and this
patch gave boosts up to 40 Mbps to method [4] in both directions
comparing to net-next, which made overall performance relatively
close to [1] (without it, [4] is the slowest).
v2:
- Add more references and explanations to commit message
- Fix some typos ibid
- No functional changes
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently WR sizes are updated from rds_ib_sysctl_max_send_wr and
rds_ib_sysctl_max_recv_wr when a connection is shut down. As a result,
a connection being down while rds_ib_sysctl_max_send_wr or
rds_ib_sysctl_max_recv_wr are updated, will not update the sizes when
it comes back up.
Move resizing of WRs to rds_ib_setup_qp so that connections will be setup
with the most current WR sizes.
Signed-off-by: Dag Moxnes <dag.moxnes@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver forgets to free allocated netdev in remove like
what is done in probe failure.
Add the free to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook says:
====================
bnx2x: Remove function casts
In order to make the entire kernel usable under Clang's Control Flow
Integrity protections, function prototype casts need to be avoided
because this will trip CFI checks at runtime (i.e. a mismatch between
the caller's expected function prototype and the destination function's
prototype). Many of these cases can be found with -Wcast-function-type,
which found that bnx2x had a bunch of needless (or at least confusing)
function casts. This series removes them all.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
All .rw_reset callbacks except bnx2x_84833_hw_reset_phy() use a
void return type. No callers of .hw_reset check a return value and
bnx2x_84833_hw_reset_phy() unconditionally returns 0. Remove all
hw_reset_t casts and fix the return type to void.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The return values for format_fw_ver_t callbacks are supposed to be
"int", not "u8". Ultimately, the top-level caller doesn't actually check
the return value at all, but just clean this all up anyway and fix the
prototypes so that casts are no longer needed.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
No callers of .config_init check return values. Remove the casting and
change all callbacks to have the correct function prototype.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function casts for .read_status callbacks end up casting some int
return values to u8. This seems to be bug-prone (-EINVAL being returned
into something that appears to be true/false), but fixing the function
prototypes doesn't change the existing behavior. Fix the return values
to remove the casts.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
NULL is already "void *" so it will auto-cast in assignments and
initializers. Additionally, all the callbacks for .link_reset,
.config_loopback, .set_link_led, and .phy_specific_func are already
correct. No casting is needed for these, so remove them.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
ENETC has a register PSPEED to indicate the link speed of hardware.
It is need to update accordingly. PSPEED field needs to be updated
with the port speed for QBV scheduling purposes. Or else there is
chance for gate slot not free by frame taking the MAC if PSPEED and
phy speed not match. So update PSPEED when link adjust. This is
implement by the adjust_link.
Signed-off-by: Po Liu <Po.Liu@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ENETC supports in hardware for time-based egress shaping according
to IEEE 802.1Qbv. This patch implement the Qbv enablement by the
hardware offload method qdisc tc-taprio method.
Also update cbdr writeback to up level since control bd ring may
writeback data to control bd ring.
Signed-off-by: Po Liu <Po.Liu@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The page pool keeps track of the number of pages in flight, and
it isn't safe to remove the pool until all pages are returned.
Disallow removing the pool until all pages are back, so the pool
is always available for page producers.
Make the page pool responsible for its own delayed destruction
instead of relying on XDP, so the page pool can be used without
the xdp memory model.
When all pages are returned, free the pool and notify xdp if the
pool is registered with the xdp memory system. Have the callback
perform a table walk since some drivers (cpsw) may share the pool
among multiple xdp_rxq_info.
Note that the increment of pages_state_release_cnt may result in
inflight == 0, resulting in the pool being released.
Fixes: d956a048cd ("xdp: force mem allocator removal and periodic warning")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Karsten Graul says:
====================
last part of termination improvements
Patches 1 and 2 finish the set of termination patches, introducing
a reboot handler that terminates all link groups. Patch 3 adds an
rcu_barrier before the module is unloaded, and patch 4 is cleanup.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Constant SMC_CLOSE_WAIT_LISTEN_CLCSOCK_TIME is defined, but since
commit 3d50206759 ("net/smc: simplify wait when closing listen socket")
no longer used. Remove it.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add rcu_barrier() to make sure no RCU readers or callbacks are
pending when the module is unloaded.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When rebooting it should be guaranteed all link groups are cleaned
up and freed.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the smc module is unloaded return control from exit routine only,
if all link groups are freed.
If an IB device is thrown away return control from device removal only,
if all link groups belonging to this device are freed.
Counters for the total number of SMCR link groups and for the total
number of SMCR links per IB device are introduced. smc module unloading
continues only if the total number of SMCR link groups is zero. IB device
removal continues only it the total number of SMCR links per IB device
has decreased to zero.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This sequence of operations:
ip link set dev br0 type bridge vlan_filtering 1
bridge vlan del dev swp2 vid 1
ip link set dev br0 type bridge vlan_filtering 1
ip link set dev br0 type bridge vlan_filtering 0
apparently fails with the message:
[ 31.305716] sja1105 spi0.1: Reset switch and programmed static config. Reason: VLAN filtering
[ 31.322161] sja1105 spi0.1: Couldn't determine PVID attributes (pvid 0)
[ 31.328939] sja1105 spi0.1: Failed to setup VLAN tagging for port 1: -2
[ 31.335599] ------------[ cut here ]------------
[ 31.340215] WARNING: CPU: 1 PID: 194 at net/switchdev/switchdev.c:157 switchdev_port_attr_set_now+0x9c/0xa4
[ 31.349981] br0: Commit of attribute (id=6) failed.
[ 31.354890] Modules linked in:
[ 31.357942] CPU: 1 PID: 194 Comm: ip Not tainted 5.4.0-rc6-01792-gf4f632e07665-dirty #2062
[ 31.366167] Hardware name: Freescale LS1021A
[ 31.370437] [<c03144dc>] (unwind_backtrace) from [<c030e184>] (show_stack+0x10/0x14)
[ 31.378153] [<c030e184>] (show_stack) from [<c11d1c1c>] (dump_stack+0xe0/0x10c)
[ 31.385437] [<c11d1c1c>] (dump_stack) from [<c034c730>] (__warn+0xf4/0x10c)
[ 31.392373] [<c034c730>] (__warn) from [<c034c7bc>] (warn_slowpath_fmt+0x74/0xb8)
[ 31.399827] [<c034c7bc>] (warn_slowpath_fmt) from [<c11ca204>] (switchdev_port_attr_set_now+0x9c/0xa4)
[ 31.409097] [<c11ca204>] (switchdev_port_attr_set_now) from [<c117036c>] (__br_vlan_filter_toggle+0x6c/0x118)
[ 31.418971] [<c117036c>] (__br_vlan_filter_toggle) from [<c115d010>] (br_changelink+0xf8/0x518)
[ 31.427637] [<c115d010>] (br_changelink) from [<c0f8e9ec>] (__rtnl_newlink+0x3f4/0x76c)
[ 31.435613] [<c0f8e9ec>] (__rtnl_newlink) from [<c0f8eda8>] (rtnl_newlink+0x44/0x60)
[ 31.443329] [<c0f8eda8>] (rtnl_newlink) from [<c0f89f20>] (rtnetlink_rcv_msg+0x2cc/0x51c)
[ 31.451477] [<c0f89f20>] (rtnetlink_rcv_msg) from [<c1008df8>] (netlink_rcv_skb+0xb8/0x110)
[ 31.459796] [<c1008df8>] (netlink_rcv_skb) from [<c1008648>] (netlink_unicast+0x17c/0x1f8)
[ 31.468026] [<c1008648>] (netlink_unicast) from [<c1008980>] (netlink_sendmsg+0x2bc/0x3b4)
[ 31.476261] [<c1008980>] (netlink_sendmsg) from [<c0f43858>] (___sys_sendmsg+0x230/0x250)
[ 31.484408] [<c0f43858>] (___sys_sendmsg) from [<c0f44c84>] (__sys_sendmsg+0x50/0x8c)
[ 31.492209] [<c0f44c84>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x28)
[ 31.500090] Exception stack(0xedf47fa8 to 0xedf47ff0)
[ 31.505122] 7fa0: 00000002 b6f2e060 00000003 beabd6a4 00000000 00000000
[ 31.513265] 7fc0: 00000002 b6f2e060 5d6e3213 00000128 00000000 00000001 00000006 000619c4
[ 31.521405] 7fe0: 00086078 beabd658 0005edbc b6e7ce68
The reason is the implementation of br_get_pvid:
static inline u16 br_get_pvid(const struct net_bridge_vlan_group *vg)
{
if (!vg)
return 0;
smp_rmb();
return vg->pvid;
}
Since VID 0 is an invalid pvid from the bridge's point of view, let's
add this check in dsa_8021q_restore_pvid to avoid restoring a pvid that
doesn't really exist.
Fixes: 5f33183b7f ("net: dsa: tag_8021q: Restore bridge VLANs when enabling vlan_filtering")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrea Mayer says:
====================
seg6: fixes to Segment Routing in IPv6
This patchset is divided in 2 patches and it introduces some fixes
to Segment Routing in IPv6, which are:
- in function get_srh() fix the srh pointer after calling
pskb_may_pull();
- fix the skb->transport_header after calling decap_and_validate()
function;
Any comments on the patchset are welcome.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
in the receive path (more precisely in ip6_rcv_core()) the
skb->transport_header is set to skb->network_header + sizeof(*hdr). As a
consequence, after routing operations, destination input expects to find
skb->transport_header correctly set to the next protocol (or extension
header) that follows the network protocol. However, decap behaviors (DX*,
DT*) remove the outer IPv6 and SRH extension and do not set again the
skb->transport_header pointer correctly. For this reason, the patch sets
the skb->transport_header to the skb->network_header + sizeof(hdr) in each
DX* and DT* behavior.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
pskb_may_pull may change pointers in header. For this reason, it is
mandatory to reload any pointer that points into skb header.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
