When a new fastmap is about to be written UBI must make sure it has a
free block for a fastmap anchor available. For this ubi_update_fastmap()
calls ubi_ensure_anchor_pebs(). This stopped working with 2e8f08deab
("ubi: Fix races around ubi_refill_pools()"), with this commit the wear
leveling code is blocked and can no longer produce free PEBs. UBI then
more often than not falls back to write the new fastmap anchor to the
same block it was already on which means the same erase block gets
erased during each fastmap write and wears out quite fast.
As the locking prevents us from producing the anchor PEB when we
actually need it, this patch changes the strategy for creating the
anchor PEB. We no longer create it on demand right before we want to
write a fastmap, but instead we create an anchor PEB right after we have
written a fastmap. This gives us enough time to produce a new anchor PEB
before it is needed. To make sure we have an anchor PEB for the very
first fastmap write we call ubi_ensure_anchor_pebs() during
initialisation as well.
Fixes: 2e8f08deab ("ubi: Fix races around ubi_refill_pools()")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Running stress-test test_2 in mtd-utils on ubi device, sometimes we can
get following oops message:
BUG: unable to handle page fault for address: ffffffff00000140
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 280a067 P4D 280a067 PUD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 60 Comm: kworker/u16:1 Kdump: loaded Not tainted 5.2.0 #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0
-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
Workqueue: writeback wb_workfn (flush-ubifs_0_0)
RIP: 0010:rb_next_postorder+0x2e/0xb0
Code: 80 db 03 01 48 85 ff 0f 84 97 00 00 00 48 8b 17 48 83 05 bc 80 db
03 01 48 83 e2 fc 0f 84 82 00 00 00 48 83 05 b2 80 db 03 01 <48> 3b 7a
10 48 89 d0 74 02 f3 c3 48 8b 52 08 48 83 05 a3 80 db 03
RSP: 0018:ffffc90000887758 EFLAGS: 00010202
RAX: ffff888129ae4700 RBX: ffff888138b08400 RCX: 0000000080800001
RDX: ffffffff00000130 RSI: 0000000080800024 RDI: ffff888138b08400
RBP: ffff888138b08400 R08: ffffea0004a6b920 R09: 0000000000000000
R10: ffffc90000887740 R11: 0000000000000001 R12: ffff888128d48000
R13: 0000000000000800 R14: 000000000000011e R15: 00000000000007c8
FS: 0000000000000000(0000) GS:ffff88813ba00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffff00000140 CR3: 000000013789d000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
destroy_old_idx+0x5d/0xa0 [ubifs]
ubifs_tnc_start_commit+0x4fe/0x1380 [ubifs]
do_commit+0x3eb/0x830 [ubifs]
ubifs_run_commit+0xdc/0x1c0 [ubifs]
Above Oops are due to the slab-out-of-bounds happened in do-while of
function layout_in_gaps indirectly called by ubifs_tnc_start_commit. In
function layout_in_gaps, there is a do-while loop placing index nodes
into the gaps created by obsolete index nodes in non-empty index LEBs
until rest index nodes can totally be placed into pre-allocated empty
LEBs. @c->gap_lebs points to a memory area(integer array) which records
LEB numbers used by 'in-the-gaps' method. Whenever a fitable index LEB
is found, corresponding lnum will be incrementally written into the
memory area pointed by @c->gap_lebs. The size
((@c->lst.idx_lebs + 1) * sizeof(int)) of memory area is allocated before
do-while loop and can not be changed in the loop. But @c->lst.idx_lebs
could be increased by function ubifs_change_lp (called by
layout_leb_in_gaps->ubifs_find_dirty_idx_leb->get_idx_gc_leb) during the
loop. So, sometimes oob happens when number of cycles in do-while loop
exceeds the original value of @c->lst.idx_lebs. See detail in
https://bugzilla.kernel.org/show_bug.cgi?id=204229.
This patch fixes oob in layout_in_gaps.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
If there are more than one valid snod on the sleb->nodes list,
do_kill_orphans will malloc ino more than once without releasing
previous ino's memory. Finally, it will trigger memory leak.
Fixes: ee1438ce5d ("ubifs: Check link count of inodes when...")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The sup->hash_algo is a __le16, and whilst 0xffff is
the same in __le16 and u16, it would be better to use
cpu_to_le16() anyway (which should deal with constants)
and silence the following sparse warning:
fs/ubifs/sb.c:187:32: warning: incorrect type in assignment (different base types)
fs/ubifs/sb.c:187:32: expected restricted __le16 [usertype] hash_algo
fs/ubifs/sb.c:187:32: got int
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
In the ubifs_jnl_write_inode() functon, it calls ubifs_iget()
with xent->inum. The xent->inum is __le64, but the ubifs_iget()
takes native cpu endian.
I think that this should be changed to passing le64_to_cpu(xent->inum)
to fix the following sparse warning:
fs/ubifs/journal.c:902:58: warning: incorrect type in argument 2 (different base types)
fs/ubifs/journal.c:902:58: expected unsigned long inum
fs/ubifs/journal.c:902:58: got restricted __le64 [usertype] inum
Fixes: 7959cf3a75 ("ubifs: journal: Handle xattrs like files")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
In set_dent_cookie() the result of prandom_u32() is
assinged to an __le32 type. Make this a forced conversion
to remove the following sparse warning:
fs/ubifs/journal.c:506:30: warning: incorrect type in assignment (different base types)
fs/ubifs/journal.c:506:30: expected restricted __le32 [usertype] cookie
fs/ubifs/journal.c:506:30: got unsigned int
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
AFAICT this kind of problems are no longer possible since
debugfs gained file removal protection via
e9117a5a4b ("debugfs: implement per-file removal protection").
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Compiler generates following warning when kernel is built with W=1:
drivers/mtd/ubi/ubi.h:971:1: warning: ‘static’ is not at beginning
of declaration [-Wold-style-declaration]
This commit fixes this by correctly ordering keywords.
Signed-off-by: Rishi Gupta <gupt21@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
It might be interesting, if "skip_check" is set or not, so lets print
this flag in ubi_dump_vol_info() as well.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Richard Weinberger <richard@nod.at>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Pull iommu fixes from Joerg Roedel:
- Fix for Intel IOMMU to correct invalidation commands when in SVA
mode.
- Update MAINTAINERS entry for Intel IOMMU
* tag 'iommu-fixes-v5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix QI_DEV_IOTLB_PFSID and QI_DEV_EIOTLB_PFSID macros
MAINTAINERS: Update for INTEL IOMMU (VT-d) entry
ethtool expects ETHTOOL_GRXCLSRLALL to set ethtool_rxnfc->data with the
total number of entries in the rx classifier table. Surprisingly, mlx4
is missing this part (in principle ethtool could still move forward and
try the insert).
Tested: compiled and run command:
phh13:~# ethtool -N eth1 flow-type udp4 queue 4
Added rule with ID 255
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Daniel Borkmann says:
====================
pull-request: bpf 2019-11-15
The following pull-request contains BPF updates for your *net* tree.
We've added 1 non-merge commits during the last 9 day(s) which contain
a total of 1 file changed, 3 insertions(+), 1 deletion(-).
The main changes are:
1) Fix a missing unlock of bpf_devs_lock in bpf_offload_dev_create()'s
error path, from Dan.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Raw NAND core
* Useless extra checks dropped.
* Updated the detection of the bad block markers position
Raw NAND controller drivers:
* Cadence : New driver
* Brcmnand: Support for flash-dma v0 + fixes
* Denali : Support for the legacy controller/chip DT representation
dropped
* Superfluous dev_err() calls removed
SPI NOR core changes:
- introduce 'struct spi_nor_controller_ops',
- clean the Register Operations methods,
- use dev_dbg insted of dev_err for low level info,
- fix retlen handling in sst_write(),
- fix silent truncations in spi_nor_read and spi_nor_read_raw(),
- fix the clearing of QE bit on lock()/unlock(),
- rework the disabling of the block write protection,
- rework the Quad Enable methods,
- make sure nor->spimem and nor->controller_ops are mutually exclusive,
- set default Quad Enable method for ISSI flashes,
- add support for few flashes.
SPI NOR controller drivers changes:
- intel-spi:
- support chips without software sequencer,
- add support for Intel Cannon Lake and Intel Comet Lake-H flashes.
CFI core changes:
* Code cleanups related useless initializers and coding style issues
* Fix for a possible double free problem in cfi_cmdset_0002
* Improved error reporting and handling in cfi_cmdset_0002 core for HyperFlash
The entire point of nd-core.h is to hide functionality that no leaf
driver should touch. In fact, the commit that added it had no need to
include it.
Fixes: 06e8ccdab1 ("acpi: nfit: Add support for detect platform...")
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull i2c fixes from Wolfram Sang:
"An I2C core fix to prevent a use-after-free in a rare error path,
and an I2C ACPI addition to work around broken HW/firmware related
to touchscreens"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: fix use after free in of_i2c_notify
i2c: acpi: Force bus speed to 400KHz if a Silead touchscreen is present
The cma is currently using a hard-coded value, CMA_IBOE_PACKET_LIFETIME,
for the PacketLifeTime, as it can not be determined from the network.
This value might not be optimal for all networks.
The cma module supports the function rdma_set_ack_timeout to set the ACK
timeout for a QP associated with a connection. As per IBTA 12.7.34 local
ACK timeout = (2 * PacketLifeTime + Local CA’s ACK delay). Assuming a
negligible local ACK delay, we can use PacketLifeTime = local ACK
timeout/2 as a reasonable approximation for RoCE networks.
Link: https://lore.kernel.org/r/1572439440-17416-1-git-send-email-dag.moxnes@oracle.com
Signed-off-by: Dag Moxnes <dag.moxnes@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Enable handling of i2c repeated start. The current code
handles a multi msg i2c transfer as separate i2c bus
transactions. This change will now handle this case
using the i2c repeated start protocol. The number of msgs
in a transfer is limited to two, and must be a write
followed by a read.
Signed-off-by: Lori Hikichi <lori.hikichi@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Icarus Chau <icarus.chau@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Shivaraj Shetty <sshetty1@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This removes the warnings about the fact that the 4 pci bridges (i.e.
the 4 pci hosts) don't have any ranges.
Signed-off-by: Valentin Longchamp <valentin@longchamp.me>
Signed-off-by: Scott Wood <oss@buserror.net>
Caching dates is never a good idea ;-)
Fixes: e7affb1dba ("powerpc/cache: add cache flush operation for various e500")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Scott Wood <oss@buserror.net>
Since commit 302c059f2e (QE: use subsys_initcall to init qe),
mpc85xx_qe_init() has done nothing apart from possibly emitting a
pr_err(). As part of reducing the amount of QE-related code in
arch/powerpc/ (and eventually support QE on other architectures),
remove this low-hanging fruit.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Scott Wood <oss@buserror.net>
Change all phy-connection-type properties to phy-mode that are better
supported by the fman driver.
Use the more readable fixed-link node for the 2 sgmii links.
Change the RGMII link to rgmii-id as the clock delays are added by the
phy.
Signed-off-by: Valentin Longchamp <valentin@longchamp.me>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
This is a revert of commit
a4244454df ("percpu-refcount: use RCU-sched insted of normal RCU")
which claims the only reason for using RCU-sched is
"rcu_read_[un]lock() … are slightly more expensive than preempt_disable/enable()"
and
"As the RCU critical sections are extremely short, using sched-RCU
shouldn't have any latency implications."
The problem with using RCU-sched here is that it disables preemption and
the release callback (called from percpu_ref_put_many()) must not
acquire any sleeping locks like spinlock_t. This breaks PREEMPT_RT
because some of the users acquire spinlock_t locks in their callbacks.
Using rcu_read_lock() on PREEMPTION=n kernels is not any different
compared to rcu_read_lock_sched(). On PREEMPTION=y kernels there are
already performance issues due to additional preemption points.
Looking at the code, the rcu_read_lock() is just an increment and unlock
is almost just a decrement unless there is something special to do. Both
are functions while disabling preemption is inlined.
Doing a small benchmark, the minimal amount of time required was mostly
the same. The average time required was higher due to the higher MAX
value (which could be preemption). With DEBUG_PREEMPT=y it is
rcu_read_lock_sched() that takes a little longer due to the additional
debug code.
Convert back to normal RCU.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Pull crypto fix from Herbert Xu:
"This reverts a number of changes to the khwrng thread which feeds the
kernel random number pool from hwrng drivers. They were trying to fix
issues with suspend-and-resume but ended up causing regressions"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
Revert "hwrng: core - Freeze khwrng thread during suspend"
The ccree driver does not use the ablkcipher interface but contains
a rudimentary reference to it in the naming of an unrelated macro.
Let's rename it to avoid confusion.
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all users of the deprecated ablkcipher interface have been
moved to the skcipher interface, ablkcipher is no longer used and
can be removed.
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These drivers do not use either the deprecated blkcipher or the current
skcipher walk API, so this comment must refer to a previous state of the
driver that no longer exists. So drop the comments.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The driver specific types contain some rudimentary references to the
blkcipher API, which is deprecated and will be removed. To avoid confusion,
rename these to skcipher. This is a cosmetic change only, as the code does
not actually use the blkcipher API.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 7a7ffe65c8 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 7a7ffe65c8 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 7a7ffe65c8 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 7a7ffe65c8 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 7a7ffe65c8 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 7a7ffe65c8 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 7a7ffe65c8 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Cc: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 7a7ffe65c8 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 7a7ffe65c8 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
