This reverts commit e9c15badbb ("fs: Do not check if there is a
fsnotify watcher on pseudo inodes"). The commit intended to eliminate
fsnotify-related overhead for pseudo inodes but it is broken in
concept. inotify can receive events of pipe files under /proc/X/fd and
chromium relies on close and open events for sandboxing. Maxim Levitsky
reported the following
Chromium starts as a white rectangle, shows few white rectangles that
resemble its notifications and then crashes.
The stdout output from chromium:
[mlevitsk@starship ~]$chromium-freeworld
mesa: for the --simplifycfg-sink-common option: may only occur zero or one times!
mesa: for the --global-isel-abort option: may only occur zero or one times!
[3379:3379:0628/135151.440930:ERROR:browser_switcher_service.cc(238)] XXX Init()
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0072
Received signal 11 SEGV_MAPERR 0000004a9048
Crashes are not universal but even if chromium does not crash, it certainly
does not work properly. While filtering just modify and access might be
safe, the benefit is not worth the risk hence the revert.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Fixes: e9c15badbb ("fs: Do not check if there is a fsnotify watcher on pseudo inodes")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Don't forget to wake up a process to which io_rw_reissue() added
task_work.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
generic_file_fsync() exfat used could not guarantee the consistency of
a file because it has flushed not dirty metadata but only dirty data pages
for a file.
Instead of that, use exfat_file_fsync() for files and directories so that
it guarantees to commit both the metadata and data pages for a file.
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
We need to commit dirty metadata and pages to disk
before remounting exfat as read-only.
This fixes a failure in xfstests generic/452
generic/452 does the following:
cp something <exfat>/
mount -o remount,ro <exfat>
the <exfat>/something is corrupted. because while
exfat is remounted as read-only, exfat doesn't
have a chance to commit metadata and
vfs invalidates page caches in a block device.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
If the second exfat_get_dentry() call fails then we need to release
"old_bh" before returning. There is a similar bug in exfat_move_file().
Fixes: 5f2aa07507 ("exfat: add inode operations")
Reported-by: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Some fsck tool complain that padding part of the FileName field
is not set to the value 0000h. So let's maintain filesystem cleaner,
as exfat's spec. recommendation.
Signed-off-by: Hyeongseok.Kim <Hyeongseok@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Pull EFI fixes from Ingo Molnar:
- Fix build regression on v4.8 and older
- Robustness fix for TPM log parsing code
- kobject refcount fix for the ESRT parsing code
- Two efivarfs fixes to make it behave more like an ordinary file
system
- Style fixup for zero length arrays
- Fix a regression in path separator handling in the initrd loader
- Fix a missing prototype warning
- Add some kerneldoc headers for newly introduced stub routines
- Allow support for SSDT overrides via EFI variables to be disabled
- Report CPU mode and MMU state upon entry for 32-bit ARM
- Use the correct stack pointer alignment when entering from mixed mode
* tag 'efi-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: arm: Print CPU boot mode and MMU state at boot
efi/libstub: arm: Omit arch specific config table matching array on arm64
efi/x86: Setup stack correctly for efi_pe_entry
efi: Make it possible to disable efivar_ssdt entirely
efi/libstub: Descriptions for stub helper functions
efi/libstub: Fix path separator regression
efi/libstub: Fix missing-prototype warning for skip_spaces()
efi: Replace zero-length array and use struct_size() helper
efivarfs: Don't return -EINTR when rate-limiting reads
efivarfs: Update inode modification time for successful writes
efi/esrt: Fix reference count leak in esre_create_sysfs_entry.
efi/tpm: Verify event log header before parsing
efi/x86: Fix build with gcc 4
req->iopoll() is not necessarily called by a task that submitted a
request. Because of that, it's dangerous to grab_env() and punt async on
-EGAIN, potentially grabbing another task's mm and corrupting its
memory.
Do resubmit from the submitter task context.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are a lot of new users of task_work, and some of task_work_add()
may happen while we do io polling, thus make iopoll from time to time
to do task_work_run(), so it doesn't poll for sitting there reqs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Assign req->result to io_size early in io_{read,write}(), it's enough
and makes it more straightforward.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After pulling nxt from a request, it's no more a links head, so clear
REQ_F_LINK_HEAD. Absence of this flag also indicates that there are no
linked requests, so replacing REQ_F_LINK_NEXT, which can be killed.
Linked timeouts also behave leaving the flag intact when necessary.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move all batch free bits close to each other and rename in a consistent
way.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no reason to not batch deallocation of linked requests. Take
away its next req first and handle it as everything else in
io_req_multi_free().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Every request in io_req_multi_free() is has ->file set. Instead of
pointlessly defering and counting reqs with file, dismantle it on place
and save for batch dealloc.
It also saves us from potentially skipping io_cleanup_req(), put_task(),
etc. Never happens though, becacuse ->file is always there.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_free_req_many() is used only for iopoll requests, i.e. reads/writes.
Hence no need to batch inflight unhooking. For safety, it'll be done by
io_dismantle_req(), which replaces __io_req_aux_free(), and looks more
solid and cleaner.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We won't have valid ring_fd, ring_file in task work. Grab files early.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No reason to mark a head of a link as for-async in io_req_defer_prep().
grab_env(), etc. That will be done further during submission if
neccessary.
Mark for_async=false saving extra grab_env() in many cases.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's not enough to check for REQ_F_WORK_INITIALIZED and punt async
assuming that io_req_work_grab_env() was called, it may not have been.
E.g. io_close_prep() and personality path set the flag without further
async init.
As a quick fix, always pass next work through io_req_task_queue().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The cell name stored in the afs_cell struct is a 64-char + NUL buffer -
when it needs to be able to handle up to AFS_MAXCELLNAME (256 chars) + NUL.
Fix this by changing the array to a pointer and allocating the string.
Found using Coverity.
Fixes: 989782dcdc ("afs: Overhaul cell database management")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull cifs fixes from Steve French:
"Six cifs/smb3 fixes, three of them for stable.
Fixes xfstests 451, 313 and 316"
* tag '5.8-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: misc: Use array_size() in if-statement controlling expression
cifs: update ctime and mtime during truncate
cifs/smb3: Fix data inconsistent when punch hole
cifs/smb3: Fix data inconsistent when zero file range
cifs: Fix double add page to memcg when cifs_readpages
cifs: Fix cached_fid refcnt leak in open_shroot
Pull NFS client bugfixes from Anna Schumaker:
"Stable Fixes:
- xprtrdma: Fix handling of RDMA_ERROR replies
- sunrpc: Fix rollback in rpc_gssd_dummy_populate()
- pNFS/flexfiles: Fix list corruption if the mirror count changes
- NFSv4: Fix CLOSE not waiting for direct IO completion
- SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment()
Other Fixes:
- xprtrdma: Fix a use-after-free with r_xprt->rx_ep
- Fix other xprtrdma races during disconnect
- NFS: Fix memory leak of export_path"
* tag 'nfs-for-5.8-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment()
NFSv4 fix CLOSE not waiting for direct IO compeletion
pNFS/flexfiles: Fix list corruption if the mirror count changes
nfs: Fix memory leak of export_path
sunrpc: fixed rollback in rpc_gssd_dummy_populate()
xprtrdma: Fix handling of RDMA_ERROR replies
xprtrdma: Clean up disconnect
xprtrdma: Clean up synopsis of rpcrdma_flush_disconnect()
xprtrdma: Use re_connect_status safely in rpcrdma_xprt_connect()
xprtrdma: Prevent dereferencing r_xprt->rx_ep after it is freed
Pull io_uring fixes from Jens Axboe:
"Three small fixes:
- Close a corner case for polled IO resubmission (Pavel)
- Toss commands when exiting (Pavel)
- Fix SQPOLL conditional reschedule on perpetually busy submit
(Xuan)"
* tag 'io_uring-5.8-2020-06-26' of git://git.kernel.dk/linux-block:
io_uring: fix current->mm NULL dereference on exit
io_uring: fix hanging iopoll in case of -EAGAIN
io_uring: fix io_sq_thread no schedule when busy
Fix build errors when CONFIG_NET is not set/enabled:
../fs/io_uring.c:5472:10: error: too many arguments to function ‘io_sendmsg’
../fs/io_uring.c:5474:10: error: too many arguments to function ‘io_send’
../fs/io_uring.c:5484:10: error: too many arguments to function ‘io_recvmsg’
../fs/io_uring.c:5486:10: error: too many arguments to function ‘io_recv’
../fs/io_uring.c:5510:9: error: too many arguments to function ‘io_accept’
../fs/io_uring.c:5518:9: error: too many arguments to function ‘io_connect’
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: io-uring@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge in changes that went into 5.8-rc3. GIT will silently do the
merge, but we still need a tweak on top of that since
io_complete_rw_common() was modified to take a io_comp_state pointer.
The auto-merge fails on that, and we end up with something that
doesn't compile.
* io_uring-5.8:
io_uring: fix current->mm NULL dereference on exit
io_uring: fix hanging iopoll in case of -EAGAIN
io_uring: fix io_sq_thread no schedule when busy
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's easier to return next work from ->do_work() than
having an in-out argument. Looks nicer and easier to compile.
Also, merge io_wq_assign_next() into its only user.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently links are always done in an async fashion, unless we catch them
inline after we successfully complete a request without having to resort
to blocking. This isn't necessarily the most efficient approach, it'd be
more ideal if we could just use the task_work handling for this.
Outside of saving an async jump, we can also do less prep work for these
kinds of requests.
Running dependent links from the task_work handler yields some nice
performance benefits. As an example, examples/link-cp from the liburing
repository uses read+write links to implement a copy operation. Without
this patch, the a cache fold 4G file read from a VM runs in about 3
seconds:
$ time examples/link-cp /data/file /dev/null
real 0m2.986s
user 0m0.051s
sys 0m2.843s
and a subsequent cache hot run looks like this:
$ time examples/link-cp /data/file /dev/null
real 0m0.898s
user 0m0.069s
sys 0m0.797s
With this patch in place, the cold case takes about 2.4 seconds:
$ time examples/link-cp /data/file /dev/null
real 0m2.400s
user 0m0.020s
sys 0m2.366s
and the cache hot case looks like this:
$ time examples/link-cp /data/file /dev/null
real 0m0.676s
user 0m0.010s
sys 0m0.665s
As expected, the (mostly) cache hot case yields the biggest improvement,
running about 25% faster with this change, while the cache cold case
yields about a 20% increase in performance. Outside of the performance
increase, we're using less CPU as well, as we're not using the async
offload threads at all for this anymore.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Figuring out the root case for the REMOVE/CLOSE race and
suggesting the solution was done by Neil Brown.
Currently what happens is that direct IO calls hold a reference
on the open context which is decremented as an asynchronous task
in the nfs_direct_complete(). Before reference is decremented,
control is returned to the application which is free to close the
file. When close is being processed, it decrements its reference
on the open_context but since directIO still holds one, it doesn't
sent a close on the wire. It returns control to the application
which is free to do other operations. For instance, it can delete a
file. Direct IO is finally releasing its reference and triggering
an asynchronous close. Which races with the REMOVE. On the server,
REMOVE can be processed before the CLOSE, failing the REMOVE with
EACCES as the file is still opened.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Suggested-by: Neil Brown <neilb@suse.com>
CC: stable@vger.kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the mirror count changes in the new layout we pick up inside
ff_layout_pg_init_write(), then we can end up adding the
request to the wrong mirror and corrupting the mirror->pg_list.
Fixes: d600ad1f2b ("NFS41: pop some layoutget errors to application")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The try_location function is called within a loop by nfs_follow_referral.
try_location calls nfs4_pathname_string to created the export_path.
nfs4_pathname_string allocates the memory. export_path is stored in the
nfs_fs_context/fs_context structure similarly as hostname and source.
But whereas the ctx hostname and source are freed before assignment,
export_path is not. So if there are multiple loops, the new export_path
will overwrite the old without the old being freed.
So call kfree for export_path.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Pull fsnotify fixlet from Jan Kara:
"A performance improvement to reduce impact of fsnotify for inodes
where it isn't used"
* tag 'fsnotify_for_v5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs: Do not check if there is a fsnotify watcher on pseudo inodes
A bit more surgery required here, as completions are generally done
through the kiocb->ki_complete() callback, even if they complete inline.
This enables the regular read/write path to use the io_comp_state
logic to batch inline completions.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Provide the completion state to the handlers that we know can complete
inline, so they can utilize this for batching completions.
Cap the max batch count at 32. This should be enough to provide a good
amortization of the cost of the lock+commit dance for completions, while
still being low enough not to cause any real latency issues for SQPOLL
applications.
Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his
profile from:
17.97% [kernel] [k] copy_user_generic_unrolled
13.92% [kernel] [k] io_commit_cqring
11.04% [kernel] [k] __io_cqring_fill_event
10.33% [kernel] [k] udp_recvmsg
5.94% [kernel] [k] skb_release_data
4.31% [kernel] [k] udp_rmem_release
2.68% [kernel] [k] __check_object_size
2.24% [kernel] [k] __slab_free
2.22% [kernel] [k] _raw_spin_lock_bh
2.21% [kernel] [k] kmem_cache_free
2.13% [kernel] [k] free_pcppages_bulk
1.83% [kernel] [k] io_submit_sqes
1.38% [kernel] [k] page_frag_free
1.31% [kernel] [k] inet_recvmsg
to
19.99% [kernel] [k] copy_user_generic_unrolled
11.63% [kernel] [k] skb_release_data
9.36% [kernel] [k] udp_rmem_release
8.64% [kernel] [k] udp_recvmsg
6.21% [kernel] [k] __slab_free
4.39% [kernel] [k] __check_object_size
3.64% [kernel] [k] free_pcppages_bulk
2.41% [kernel] [k] kmem_cache_free
2.00% [kernel] [k] io_submit_sqes
1.95% [kernel] [k] page_frag_free
1.54% [kernel] [k] io_put_req
[...]
0.07% [kernel] [k] io_commit_cqring
0.44% [kernel] [k] __io_cqring_fill_event
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No functional changes in this patch, just in preparation for having the
completion state be available on the issue side. Later on, this will
allow requests that complete inline to be completed in batches.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No functional changes in this patch, just in preparation for passing back
pending completions to the caller and completing them in a batched
fashion.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have lots of callers of:
io_cqring_add_event(req, result);
io_put_req(req);
Provide a helper that does this for us. It helps clean up the code, and
also provides a more convenient location for us to change the completion
handling.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_queue_sqe() tries to handle all request of a link,
so it's not enough to grab mm in io_sq_thread_acquire_mm()
based just on the head.
Don't check req->needs_mm and do it always.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
io_do_iopoll() won't do anything with a request unless
req->iopoll_completed is set. So io_complete_rw_iopoll() has to set
it, otherwise io_do_iopoll() will poll a file again and again even
though the request of interest was completed long time ago.
Also, remove -EAGAIN check from io_issue_sqe() as it races with
the changed lines. The request will take the long way and be
resubmitted from io_iopoll*().
io_kiocb's result and iopoll_completed")
Fixes: bbde017a32 ("io_uring: add memory barrier to synchronize
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull erofs fix from Gao Xiang:
"Fix a regression which uses potential uninitialized high 32-bit value
unexpectedly recently observed with specific compiler options"
* tag 'erofs-for-5.8-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix partially uninitialized misuse in z_erofs_onlinepage_fixup
Move the struct block_device definition together with most of the
block layer definitions, as it has nothing to do with the rest of fs.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
