Device tree changes for omaps for v5.9 merge window
This series of changes configures the GPIO line names for am335x beaglebone
black and pocketbeagle to make it easier to configure the pins. To make use
of the pins, we also add the gpio-ranges for am335x.
We also enable IPU and DSP repmoteproc for am5729-beaglebone-ai, and then
there are two non-urgent dtschema validator warning fixes.
* tag 'omap-for-v5.9/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-pocketbeagle: add gpio-line-names
ARM: dts: am335x-boneblack: add gpio-line-names
ARM: dts: am33xx-l4: add gpio-ranges
ARM: dts: am5729-beaglebone-ai: Disable ununsed mailboxes
ARM: dts: am5729-beaglebone-ai: Enable IPU & DSP rprocs
ARM: dts: am: Align L2 cache-controller nodename with dtschema
ARM: dts: omap: Align L2 cache-controller nodename with dtschema
Link: https://lore.kernel.org/r/pull-1594402929-762188@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
UniPhier ARM SoC DT updates for v5.9
- add missing interrupts property to support card serial
- fix node names to follow the DT schema
- add PCIe endpoint and PHY nodes for Pro5 SoC
- simplify device hierarchy of support-card.dtsi
* tag 'uniphier-dt-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
ARM: dts: uniphier: simplify support-card node structure
ARM: dts: uniphier: Add PCIe endpoint and PHY node for Pro5
ARM: dts: uniphier: Rename ethphy node to ethernet-phy
ARM: dts: uniphier: give fixed port number to support card serial
ARM: dts: uniphier: rename support card serial node to fix schema warning
ARM: dts: uniphier: add interrupts to support card serial
Link: https://lore.kernel.org/r/CAK7LNARGDcCKxV3-H7WmuZAVe49n0QF+672-KN0tsP0och0a_A@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for the MYiR imx6ULL based single board computer
equipped with on board 256MB NAND & RAM. The board also
provides expansion header for expansion board, but this
commit adds only support for SBC.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The imx-pwm driver supports 3 cells and this is the more flexible setting.
So use it by default and overwrite it back to two for the files that
reference the PWMs with just 2 cells to minimize changes.
This allows to drop explicit setting to 3 cells for the boards that already
depend on this. The boards that are now using 2 cells explicitly can be
converted to 3 individually.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SFF soldered onto the board expect the ports to use 1000BaseX. It
makes no sense to have the ports set to SGMII, since they don't even
support that mode.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SFF soldered onto the board expects the port to use 1000BaseX. It
makes no sense to have the port set to SGMII, since it doesn't even
support that mode.
Signed-off-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Protonic RVT is an internal development platform for a wireless ISObus
Virtual Terminal based on COTS tablets, and the predecessor of the WD2
platform.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the Protonic WD2 board, which is an internal development
platform for low-cost agricultural Virtual Terminals based on COTS tablets
and web applications.
It inherits from the PRTI6Q base class.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Protonic PRTI6Q is a development board and a base class for different
specific customer application boards based on the i.MX6 family of SoCs,
developed by Protonic Holland.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix dtschema validator warnings like:
l2-cache@a02000: $nodename:0:
'l2-cache@a02000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix dtschema validator warnings like:
l2-cache@40006000: $nodename:0:
'l2-cache@40006000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add MQS support. As the pin conflict with usdhc2, then need
to add a separate dts.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In imx6sll.dtsi, the ssi node name is different with other
platforms (imx6qdl, imx6sl, imx6sx), but the
sound/soc/fsl/fsl-asoc-card.c machine driver needs to check
ssi node name for audmux configuration, then different ssi
node name causes issue on imx6sll platform.
So we change ssi node name to make all platforms have same
name.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change i.MX6/i.MX7 SoCs usdhc node name from usdhc to mmc to be
compliant with yaml schema, it requires the nodename to be "mmc".
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change i.MX2/i.MX3/i.MX5 SoCs esdhc node name from esdhc to mmc to
be compliant with yaml schema, it requires the nodename to be "mmc".
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change i.MX27/i.MX31 node name from sdhci to mmc to be compliant
with yaml schema, it requires the nodename to be "mmc".
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In latest i.MX6Q RM Rev.6, 05/2020, #90 SPI interrupt is reserved,
so remove it from GPC node.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change IIM node name from iim to efuse to be compliant
with yaml schema, it requires the nodename to be one of
"eeprom|efuse|nvram".
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change OCOTP node name from ocotp to efuse to be compliant
with yaml schema, it requires the nodename to be one of
"eeprom|efuse|nvram".
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change OCOTP node name from ocotp-ctrl to efuse to be compliant with
yaml schema, it requires the nodename to be one of "eeprom|efuse|nvram".
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The timer fixed interval period pulse generator register
is used to generate periodic pulses. The down count
register loads the value programmed in the fixed period
interval (FIPER). At every tick of the timer accumulator
overflow, the counter decrements by the value of
TMR_CTRL[TCLK_PERIOD]. It generates a pulse when the down
counter value reaches zero. It reloads the down counter
in the cycle following a pulse.
To use the TMR_FIPER register to generate desired periodic
pulses. The value should programmed is,
desired_period - tclk_period
Current tmr-fiper2 value is to generate 100us periodic pulses.
(But the value should have been 99995, not 99990. The tclk_period is 5.)
This patch is to generate 1 second periodic pulses with value
999999995 programmed which is more desired by user.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX6/7 SoCs' temperature sensor is inside anatop module from HW
perspective, so it should be a child node of anatop.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This device hierarchy is needlessly complex.
Remove the support-card node level, and move the ethernet and serial
nodes right under the system-bus node.
This also fixes the following warning from 'make ARCH=arm dtbs_check':
support-card@1,1f00000: $nodename:0: 'support-card@1,1f00000' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This renames the node name "ethphy" to "ethernet-phy" according to
Documentation/devicetree/bindings/net/mdio.yaml.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
As per 'struct mfd_cell ab8500_devs[]' there are not 1, but 3 PWM
devices on the AB8500. Until now, each of them have referenced
the same Device Tree node. This change ensures each device has
their own.
Due to recent `dtc` checks [0], nodes cannot share the same node
name, so we are forced to rename the affected nodes by appending
their associated numeric 'bank ID'.
[0] ste-ab8500.dtsi:210.16-214.7: ERROR (duplicate_node_names):
/soc/prcmu@80157000/ab8500/ab8500-pwm: Duplicate node name
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200622083432.1491715-1-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since commit e69f5dc623 ("dt-bindings: serial: Convert 8250 to
json-schema"), the schema for "ns16550a" is checked.
'make ARCH=arm dtbs_check' emits the following warning:
uart@b0000: $nodename:0: 'uart@b0000' does not match '^serial(@[0-9a-f,]+)*$'
Rename the node to follow the pattern defined in
Documentation/devicetree/bindings/serial/serial.yaml
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit e69f5dc623 ("dt-bindings: serial: Convert 8250 to
json-schema"), the schema for "ns16550a" is checked.
Since then, 'make ARCH=arm dtbs_check' is so noisy because the
required property 'interrupts' is missing.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Remove the regulators node and define fixed regulators directly under
the root node. This makes SMDK5420 board consistent with other Exynos
boards.
Name the fixed regulator nodes consistently.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
