Direct Buffer Receive provides the driver with a mechanism by which target
can transfer information directly into host memory via DMA.
DMA rings must be initialized and configured before they can be shared
to the target for transfer ot data. Host driver will use the HAL SRNG
APIs to create, initialize and configure the DMA rings.
Change-Id: I43cd39ccbb5f5069c9a14092459d5c88ea514dca
CRs-Fixed: 2157986
Provision to send first MSDU of a PPDU to upper layer based
on PPDU ID received in RX monitor lite ring.
FR 42926
Change-Id: I6daed9382b57fb3355ec6453e0609085cc7b9bb0
CRs-Fixed: 2127108
In monitor mode, code decodes legacy rates and bandwidth information for
HT and VHT. Other changes include populating radiotap header with correct
nss and mcs values for legacy, HT and VHT frames. Mapping of mcs rates in
rx_msdu_start tlv and radiotap header info is done using Lithium data
structure document.
Change-Id: I5f20e5d89329738e3a6c076ee14457c003cab279
CRs-fixed: 2083027
Set BM_ACTION, RELEASE_SOURCE and BUFFER_OR_DESC_TYPE fields in WBM release
ring descriptor in hal_rx_msdu_link_desc_set function.
Added HAL API to retrieve RXDMA push reason and error code from REO entrance
descriptor.
Change-Id: I64209d9ebb332136fae43a55b39e0f0d242315fb
CRs-Fixed: 2062922
Changes to process PHY TLVs from monitor status ring and extract
information required for radiotap header.
Change-Id: I99d642e7506ea797b26dbfac89fd223d1a4c0a55
CRs-Fixed: 2048006
The register write apis for the srng rings pass the
srng structure as their context. Add a pointer to
the hal to enable windowing.
Change-Id: Ib3bda2d49d5c2d327cc1b986dcf825a216a004ef
CRs-Fixed: 2032131
Use windowing for register read/write. This allows
for pci based devices to reduce the mapped bar size.
Required for QCA6290.
Change-Id: Ifb173095c135e9eca454f2ba6132b5c54ea8fc4b
CRs-Fixed: 2032131
This change is for supporting monitor mode VAP. All the monitor mode ring
is configured. The related monitor mode ring includes:
-monitor mode buffer ring
-monitor mode destination ring
-monitor mode status ring
-monitor mode link descriptor ring
The packet is not sent to monitor mode ring unless the monitor mode VAP is
configured. This release support Multiple VAP - AP/STA VAP plus Monitor
VAP configuration. The status ring is not used in this release. However,
the ring is tested and the ring is moving and there are TLV's in the ring.
Change-Id: I782ee0c3b998d8b3bbac79b5e7fdecdbff15fa93
CRs-Fixed: 2013049
In this change, hif requests hal construct the shadow register
configuration for all the necessary datapath rings. Then hif
requests hal append the configuration for the srng rings used
by the host copy engine module. When constructing the shadow
register configuration, the hal makes note to use the shadow
register addresses instead of the actual addresses.
Change-Id: Ide8f523dece0d1dc6eb05f4c86739ece7909c25a
CRs-Fixed: 1113131
Changes needed to support the new definitions introduced
in the R102 hardware header files for QCA6290.
Change-Id: I4e3c27dfdc48b4d6a44f0f50f3e4a907be20e53d
CRs-Fixed: 1105853
The MC BC packets cause a NULL REO queue descriptor exception,
and hence are directed to the ring that is configured to receive
this exception from REO. As of now, this error is directed to
WBM release ring. Add handling to pass these packets to stack
instead of dropping them, when received on the WBM release ring.
Note that, the final fix may be route these to REO exception ring
from which the driver may need to pass them to stack.
CRs-Fixed: 1098153
Change-Id: If544911e7882a9f5e7dbffa5ef705618e9fcbbda
Change that allows configuration of max buffer
size for SRNG rings in the receive direction
Change-Id: Ib857f1fdf43c849078f9470ec029fe627379fcb4
CRs-Fixed: 1089874
Wifi 3.0 compile against cdp apis.
Make compilable against mobile code base.
selective hw common header include.
Change-Id: I051f917001c0d13c762d9cb5a3ec141cd278d0e7
CRs-fixed: 1075736
Add support for replenishing the rx buffers using the host to
firmware buffer ring.
This includes adding a flag QCA_HOST2FW_RXBUF_RING:
When QCA_HOST2FW_RXBUF_RING is enabled the host will do the following:
- Allocate the refill buffer ring (HTT_HOST1_TO_FW_RXBUF_RING) and
populate it with
rx buffers
- Send the refill buffer ring configuration to the firmware
- Allocate the rx DMA ring (HTT_RXDMA_HOST_BUF_RING), leave it empty.
- Send the rx DMA ring configuration to the firmware
When QCA_HOST2FW_RXBUF_RING is disabled, the host will do the following:
- Allocate the rx DMA ring (HTT_RXDMA_HOST_BUF_RING), and populate it with
rx buffers
- Send the rx DMA ring configuration to the firmware
CRs-Fixed: 1074199
Change-Id: Iec05a973cd9d628c742e3aaa16b8dabc7797625d
