Retrieve the stored TWT wake duration for a session for
to send it as part of get twt statistics response.
Change-Id: If3c23d05331d5dfb43f74f5380e81eaf2799d2e7
CRs-Fixed: 2859812
Enable FEATURE_HAL_DELAYED_REG_WRITE_V2 support for Tx rings
register writes and QCA_OL_DP_SRNG_LOCK_LESS_ACCESS support
for Rx rings register writes, for moselle platforms.
Change-Id: I6b2469d22a37a097fa721269d311c0076c3b89a0
CRs-Fixed: 2873528
Log page fault info to console for easy observation on third party
platform because the customer usually don't run cnss_diag_lite to
capture cnss logs.
Change-Id: I56a155844837792f08692703d28326fe9543c977
CRs-Fixed: 2870335
In func aead_decrypt_assoc_rsp(), it calls
find_ie_data_after_fils_session_ie() to find IE pointer after
FILS session IE from the frame payload.
There is possibility of integer underflow if frame payload length is
less than FIXED_PARAM_OFFSET_ASSOC_RSP which may increase value
of buf_len variable in find_ie_data_after_fils_session_ie() and
cause OOB during parsing process.
Validate frame payload length with FIXED_PARAM_OFFSET_ASSOC_RSP,
if it is less then return failure.
Change-Id: I78fbcfeaa1058fcf2a6fe47cd5c26390b54974af
CRs-Fixed: 2859024
Validate and process the country IE from the beacon frame.
Validate and process the TPE IE. Store the tx power values in the
vdev_mlme struct for future processing.
Change-Id: I57acca2257a263225d9bafb0f94e195a99224a60
CRs-fixed: 2841732
Add new lim api to calculate an array of tx power values. Include
hw limit from Fw and TPE values from IE along with existing
params to determine TPC power.
The new struct reg_tpc_obj in vdev_mlme object will contain max
tx power, center frequencies, number of power levels,
PSD power check, EIRP power, AP power type for 6G and TPE
power values and will be sent to FW via new WMI cmd
WMI_VDEV_SET_TPC_POWER_CMDID.
Change-Id: I80a2454c2ef0dbc3b1d69e8b233b1a56567ec1a1
CRs-Fixed: 2841873
Parse reg_info subfield present in he_ops IE from beacon on
6GHz channels to obtain AP's power type for STA.
In case of SAP, get the AP power type from SAP decision
engine and populate it in dot11f API.
Change-Id: Iec317ea35936e7a5c2372d1188fe5940afb0c28d
CRs-Fixed: 2869367
Pass a new flag to the Kbuild and add a compile flag
to enable the BUILD_TAG information.
Change-Id: Ic9bc331b64e7cbf627f5f99758f4d556328cda10
CRs-Fixed: 2865654
Freeing keys in scheduler thread may cause race condition,
to avoid that, clear the obsolete keys before starting a
new connection in wpa_supplicant context.
Change-Id: Ibeecadb117bca8f88ce5dc052bcebe92423ace22
CRs-Fixed: 2872831
This reverts change:I9408713fcf828d24688ecc45290d8c90a8d54c22
as it's not needed anymore as the actual issue(commands waiting
in active queue for response when the vdev is deleted) is fixed
with change:Ie31936132a389685ff4ff55b43ccbb4102e65830.
This wait-for-response causes a delay of around 200ms in
vdev_create as it's a blocking call.
As vdev_create happens after finding the peer device in case of
p2p, overall connection is delayed and connection time has
increased from 350ms to 600ms. This effects the
uses cases like WFD where applications have strict timing
constraints after finding the device.
Change-Id: I45c223a8d157892d8ec64b04f68cfbf39d732833
CRs-Fixed: 2870774
Per Change-Id: Ifac93fb869553d0f9eb553d5c41da43c8b014ad8, it
saves the latency level and reconfig it to fw after vdev
creates. But if user is doing WiFi OFF/ON, it expects the
default wlm level to set to fw.
Change-Id: I329ad90e09a39d461c52c614d9b7a5e23d9540dd
CRs-Fixed: 2873595
Currently the qdf_lro.o rule is not located with the other QDF_OBJS
rules, so relocate it so that all of the QDF rules are contiguous.
Change-Id: Ia4d6e133901af900d5f63208e14ac24501ac005e
CRs-Fixed: 2868050
Currently the definitions of the Direct Buffer RX component are
defined in the middle of the WMA component definitions. Relocate these
definitions so that the WMA definitions are contiguous.
Change-Id: I3f83b70a18131a84cb262840103e705862498bc4
CRs-Fixed: 2868049
Currently HTT_OBJS are added to OBJS when CONFIG_LITHIUM is not
enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
HTT_OBJS.
Change-Id: Ifdce8f5ab6b4597156341620ae101ee8be2b4afd
CRs-Fixed: 2868008
Currently HAL_OBJS are added to OBJS when CONFIG_LITHIUM is enabled.
An upcoming change requires that assignments to OBJS be
unconditional. Fortunately the assignment of .o files to HAL_OBJS is
already conditional upon CONFIG_LITHIUM so remove the condition from
the assignment to OBJS.
Change-Id: I0dd7ca874561ff6c6cd8ccfdae1775f6dcb9bf12
CRs-Fixed: 2868007
Currently FWLOG_OBJS are added to OBJS when
CONFIG_FEATURE_FW_LOG_PARSING is enabled. An upcoming change requires
that assignments to OBJS be unconditional, so relocate the condition
to wrap the assignment of FWLOG_OBJS.
Change-Id: I6b09d9dfa2553943d3bb4370dc1977106a14a7d5
CRs-Fixed: 2868006
Currently EPPING_OBJS are added to OBJS when CONFIG_FEATURE_EPPING is
enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
EPPING_OBJS.
Change-Id: I69f9b1b707c9475a393f89f2297e90e4ee8d1e5e
CRs-Fixed: 2868005
Currently DFS_OBJS are added to OBJS when
CONFIG_WLAN_DFS_MASTER_ENABLE is enabled. An upcoming change requires
that assignments to OBJS be unconditional, so relocate the condition
to wrap the assignment of DFS_OBJS.
Change-Id: I0c04087feb76c7fbbaa4231f1c36a83624e54482
CRs-Fixed: 2868004
Currently FWOL_OBJS are added to OBJS when CONFIG_WLAN_FW_OFFLOAD is
enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
FWOL_OBJS.
Change-Id: I103628406108b0ca1d8290f61e379c796a63bce5
CRs-Fixed: 2868003
Currently OCB_OBJS are added to OBJS when CONFIG_WLAN_FEATURE_DSRC is
enabled. An upcoming change requires that assignments to OBJS be
unconditional. Fortunately the assignment of .o files to OCB_OBJS is
already conditional upon CONFIG_WLAN_FEATURE_DSRC so remove the
condition from the assignment to OBJS.
Change-Id: I011aa37270b8024d2f558bdb18aac2a02e3c1026
CRs-Fixed: 2868002
Currently IPA_OBJS are added to OBJS when CONFIG_IPA_OFFLOAD is
enabled. An upcoming change requires that assignments to OBJS be
unconditional. Fortunately the assignment of .o files to IPA_OBJS is
already conditional upon CONFIG_IPA_OFFLOAD so remove the condition
from the assignment to OBJS.
Change-Id: I16217146d44b790298e47516c28e1ce6445ffed6
CRs-Fixed: 2868001
Currently PKTLOG_OBJS are added to OBJS when CONFIG_REMOVE_PKT_LOG is
not enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
PKTLOG_OBJS.
Change-Id: I34b9bea3186e5bda12e7ce0d8a1327383170b6c1
CRs-Fixed: 2868000
Currently HOST_DIAG_LOG_OBJS are added to OBJS when BUILD_DIAG_VERSION
is enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
HOST_DIAG_LOG_OBJS.
Change-Id: Icdf6898b848f682d9617537394651f533ba81553
CRs-Fixed: 2867999
Currently DISA_OBJS are added to OBJS when CONFIG_WLAN_FEATURE_DISA is
enabled. An upcoming change requires that assignments to OBJS be
unconditional. Fortunately the assignment of .o files to DISA_OBJS is
already conditional upon CONFIG_WLAN_FEATURE_DISA so remove the
condition from the assignment to OBJS.
Change-Id: I2130b8efe12e5366b40856704d62d000a4e474f4
CRs-Fixed: 2867998
Currently ACTION_OUI_OBJS are added to OBJS when
CONFIG_WLAN_FEATURE_ACTION_OUI is enabled. An upcoming change requires
that assignments to OBJS be unconditional. Fortunately the assignment
of .o files to ACTION_OUI_OBJS is already conditional upon
CONFIG_WLAN_FEATURE_ACTION_OUI so remove the condition from the
assignment to OBJS.
Change-Id: Icf1c4f061286e3ae88344b380deff4bf135143e1
CRs-Fixed: 2867997
