Holi has different version of camnoc and CPAS version
which requires separate register space and camnoc
interface changes and CPAS version change.
This change adds the same.
CRs-Fixed: 2701462
Change-Id: I9fbfab592278ba7804809872b4b4b235895477f2
Signed-off-by: Suresh Vankadara <svankada@codeaurora.org>
Enabling format measure helps to find mismatch between
the expected sensor width and height with actual sensor width
and height. In case of metadata, width is more than 16 bit, hence
skip format measure check for it.
In case of mismatch CSID will give CSID_PATH_ERROR_PIX_COUNT
and CSID_PATH_ERROR_LINE_COUNT.
CRs-Fixed: 2634468
Change-Id: Ic57a18ee5217982d36116060371bdc99405ea759
Signed-off-by: Ayush Kumar <ayushkr@codeaurora.org>
Signed-off-by: Vishalsingh Hajeri <vhajeri@codeaurora.org>
IFE Query cap currently gives only IFE Full Information. Update the
code to return IFE Full, IFE lite, full IFE-CSID and IFE-CSID lite
information in return of the IFE Query cap command.
CRs-Fixed: 2647995
Change-Id: I84cf5b766ce191aacad4a1de478c6eebafe917b3
Signed-off-by: Jigar Agrawal <jigar@codeaurora.org>
Add version_3 files to support next revision
of CPHY TPG. Extended capability for Multi-VC
mode of operation. Add support to handle IRQ.
CRs-Fixed: 2663712
Change-Id: I91864af6e9415e74104a6bce266dd78d5c021dc7
Signed-off-by: Vishalsingh Hajeri <vhajeri@codeaurora.org>
Bitmask for printing the CSI short packet and CPHY packet is
configured wrong.
Change the bitmask to print the correct values.
CRs-Fixed: 2672724
Change-Id: I716ea7f6e1dacc9669498d01550009a290374237
Signed-off-by: Gaurav Jindal <gjindal@codeaurora.org>
Improve debugging infrastructure and logging for memory related
issues. There are scenarios where the fd returned after ion_alloc
exists in camera smmu table as being mapped [stale entry].
On such scenarios, this change will return a specific error code to
userspace. The change also propagates the mapped size back to
user space.
CRs-Fixed: 2663114
Change-Id: Ia797b65d1e8ded58dec5b01df07d73262c4cfa95
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
Add support for debugging constraint violations within
the VFE Bus.
CRs-Fixed: 2545323
Change-Id: Ib8805b6b61284ac869218cab4d6689ded23bf98a
Signed-off-by: Karthik Jayakumar <kjayakum@codeaurora.org>
During unmap these internal buffers will be freed immediately
afterwards, therefore there is no need to do cache operation.
CRs-Fixed: 2627074
Change-Id: Ica4ebb93eb212604268c3450a92d075197783537
Signed-off-by: Karthik Jayakumar <kjayakum@codeaurora.org>
This change adds priority group support for CDM 2.1.
CRs-Fixed: 2682747
Change-Id: I4e97e12d916a72d41f2cf8e92cf71d15ede91da5
Signed-off-by: Trishansh Bhardwaj <tbhardwa@codeaurora.org>
Added wrapper functions for each workq to enable workq names
in log.
CRs-Fixed: 2684378
Change-Id: If5b3671fbf20777cc891cba4b27cad6ed3a0d146
Signed-off-by: Wyes Karny <wkarny@codeaurora.org>
Add support to handle SW sync & ZSLSnapshot. Add substate machine
and mechanism to handle the lifecycle of requests based on irqs
accordingly.
CRs-Fixed: 2524308
Change-Id: Ie5ba97d4ae1b38f4b44c2d3935d2882df59fcac6
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
when using the cam_io_dump function to dump the register
values we are getting 4 register values without spacing
which makes is difficult to read, so adding space
between two specific register values.
CRs-Fixed: 2675959
Change-Id: I7e5db59398e406c30aa9729eb38331aa85736175
Signed-off-by: Tejas Prajapati <tpraja@codeaurora.org>
If there is a valid request CRM will apply that request to the
custom device, in scenerios during which there is no setting to
be applied to a custom device at a given epoch CRM needs to invoke
the custom device to program default settings for the next frame.
CRs-Fixed: 2524308
Change-Id: I4701c602ab68b9f64266f03a9b200d15a808165e
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
msm: camera: tfe: Fix variable initialization issues
msm: camera: isp: Dual tfe event check with proper hw idx
msm: camera: smmu: Add support for non-contiguous mermory region
msm: camera: smmu: Use iommu best match algo for camera
msm: camera: ope: Optimize allocation of IO configuration
msm: camera: ope: Fix for KW Issues
msm: camera: ope: Add support for stripe level height configuration
msm: camera: tfe: Enable the delay line clc
msm: camera: ope: Fix false alarm for OPE HW timeout
msm: camera: tfe: Support register dump per request
msm: camera: ope: Increase max number of stripes
msm: camera: ope: Change packer and unpacker format in case NV12
msm: camera: tfe: Add packet code get command for tfe
msm: camera: ope: Trigger recovery in case of violation on write bus
msm: camera: ope: Protect ope hw reset with mutex
msm: camera: ope: Add a check for valid request in cdm callback
msm: camera: ope: Remove the BW & clock vote in release context
msm: camera: ope: Reduce OPE BUS memory
msm: camera: ope: Fix return value for ope acquire
msm: camera: ope: Fix false alarm for OPE request timeout
msm: camera: ope: Avoid deadlock during recovery after HW hang
msm: camera: tfe: tfe debug enhancement
msm: camera: cdm: Fix irq_data value in case of inline irq
msm: camera: flash: Switch off flash on provider crash
msm: camera: ope: Initialize ope hw mutex structure
msm: camera: cdm: Flush all available FIFOs during reset
msm: camera: cpas: Add mandatory bw option for axi ports clocks
msm: camera: ope: Use vzalloc to allocate the write bus ctx structure
msm: camera: ope: Fix handling of init hw failure
msm: camera: tfe: Enable per frame register dump for rdi only context
msm: camera: cdm: Protect cdm core status bits with mutex
msm: camera: cdm: correct the error check in cmd submit irq
msm: camera: ope: Fix unclock access during HW reset
msm: camera: ope: Program frame level settings after idle event
msm: camera: ope: Delay releasing of resources for last context
msm: camera: isp: Increase default SOF freeze timeout
msm: camera: smmu: Add map and unmap monitor
msm: camera: isp: Add trace events across ISP
msm: camera: smmu: Profile time taken for map, unmap
msm: camera: ope: Start context timer on receiving new request
msm: camera: tfe: Reduce stack size during set axi bw
msm: camera: cdm: Check for HW state before dumping registers
msm: camera: ope: Reduce stack footprint during acquire
msm: camera: tfe: Disable clock if tfe2 is not supported
msm: camera: cdm: Avoid cdm pause incase of BL submit
msm: camera: tfe: Optimize CSID IRQ logging
msm: camera: ope: Move request id validity check outside of lock
msm: camera: tfe: Correct the tfe hw manager dump logic
msm: camera: ope: Synchronize flush and submit BLs
msm: camera: cdm: Protect cdm reset status
msm: camera: cdm: Handle cdm deinit sequence properly
msm: camera: tfe: Reduce reset timeout to 100ms
msm: camera: ope: Fix hang detection
msm: camera: ope: Make non-fatal logs as debug and info logs
msm: camera: tfe: set overflow pending bit to zero after HW reset
msm: camera: ope: Do not disable CDM during error handling
msm: camera: ope: Add support for OPE Replay
msm: camera: ope: Stop OPE in case of init failure
msm: camera: ope: Synchronize process cmd and flush request
msm: camera: cdm: Fix CDM IRQ handling
msm: camera: tfe: LDAR dump for TFE
msm: camera: ope: Fix the length check for debug buffer
msm: camera: cdm: Fix CDM reset logic
msm: camera: ope: Dump debug registers in case of HW hang
msm: camera: tfe: Support the RDI bus port for line based mode
msm: camera: cdm: Handle out of order reset done events
msm: camera: ope: Consider other contexts during timeout
msm: camera: ope: Put GenIRQ in last stripe BL
msm: camera: tfe: Process the rdi interrupts for rdi only resource
msm: camera: jpeg: Check the HW state before accessing register
msm: camera: csiphy: Update csiphy power-up sequence for lito v2
msm: camera: cdm: Secure freeing of request lists using locks
msm: camera: cpas: Add support for Scuba camnoc
msm: camera: csiphy: Clear secure phy flags on release
msm: camera: tfe: validate the tfe bw num paths
msm: camera: ope: Reorder the reset order in ope acquire
msm: camera: ope: Dump debug registers in case of reset failure
msm: camera: ope: Add logic to detect hang in CDM
msm: camera: isp: Increase max count of cfg to support more init packets
msm: camera: core: Fix cpas axi clk rate overflow.
CRs-Fixed: 2668666
Change-Id: I882ca4bd117bebc7d1c62bc82299d69d7b5c9388
Signed-off-by: Trishansh Bhardwaj <tbhardwa@codeaurora.org>
When there is a delay in offline ife workqueue scheduling
it is possible that two requests are applied back to back.
This could lead to requests lost. Therefore we must check
for epoch flag before applying any request.
CRs-Fixed: 2686281
Change-Id: I323710a61301d79e78db22dc1f66a6a0f141389a
Signed-off-by: Venkat Chinta <vchinta@codeaurora.org>
num_cfg_new temp variable should be assigned the value of
num_hw_entries from new isp request instead of old isp request.
CRs-Fixed: 2673657
Change-Id: Ie4d29949e2c992560b6635f7e0b5db88c2dafd48
Signed-off-by: Vishalsingh Hajeri <vhajeri@codeaurora.org>
TFE hardware compilation needs to be enable with correct flag.
Correct tfe compilation flag along with necessary base Makefile
change. Also, remove unnecessary makefiles from tfe hw module.
CRs-Fixed: 2675526
Change-Id: Ibd8b8f5acc4f843bf373e14a9c8e3bc41cb58839
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
If IFE is connected to custom HW in the pipeline, make the cdm
submit a blocking call to ensure settings are programmed to IFE
on time.
CRs-Fixed: 2687917
Change-Id: Ib7a3c44f3f99a30805c1cbf49669dabc27d20431
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
There is high chances, when camera server crash flash may not have
flash off request scheduled with CRM. In case of torch on, followed
by shutdown sequence, if flash off request is not scheduled, flash
remains turned on. This change adds flash off operation, in case
of shutdown.
CRs-Fixed: 2691916
Change-Id: I472f2b204b93d0cdc3d8a1f14fff29ab479e4588
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
Aligns the uapi header types and includes to be in-line with upstream
kernel formatting. The errors are given by enabling the UAPI_HEADER_TEST
config, which is now enabled in GKI builds.
CRs-Fixed: 2679250
Change-Id: I195fb2aab9251043fc63d79dd31f2db53b1228f5
Signed-off-by: Karthik Jayakumar <kjayakum@codeaurora.org>
Some driver probes do not have a real dependency on other
driver probes. Still, they are blocked from creating subdev
nodes if that driver's probe comes after all nodes were created
in master component bind. Add subdev node at the time of subdev
register itself, to lift this requirement.
CRs-Fixed: 2686729
Change-Id: I3505071a79296dd7d5665b13d533a9a022aa1a85
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
Update the master status data type, as it expects the negative value
and do the operation accordingly. Also, correct the return code and
update the validation check.
CRs-Fixed: 2686717
Change-Id: I8ecae74de2995a08e532a7f0ef078d48d45a928e
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
The last reported request ID indicates the request ID for which
the shutter was sent last. Only update this field for requests
that have not bubbled in a given IFE ctx.
CRs-Fixed: 2680502
Change-Id: I9ee4b479fe95800efa40ea1ff8d840fc79ef6528
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
For secure mode, csiphy driver ask for secure stream. Currently
this call always return success. This change return the appropriate
result of failure/success.
CRs-Fixed: 2673418
Change-Id: Ib425ad77e6481888acefdaf843256602aa759cf3
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
Some mfhdr usecases require more than 1024 fences because of
delayed request processing and bypass. Increase maximum number
of fences or sync objects to 2048.
CRs-Fixed: 2598592
Change-Id: If11fa2986fce0cd97c14370d29a117230134d6f5
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
