Fix memory allocation failure for nbuf pointers array in
dp_pdev_rx_buffers_attach(), by allocating a single page
of memory for the pointers and re-using them by iterating
in a loop until the total required nbuf's are traversed,
instead of allocating a huge contiguous memory for pointers
to store the address locations of all the nbuf's.
Change-Id: I47ca8f94405e44d6bdbc43129012df1b65b14ba6
CRs-Fixed: 2464598
Regulatory channel state is mistaken as chan_flags.
Set regulatory channel state to CHANNEL_STATE_DISABLE.
Change-Id: I72dd40bb3a7690e0156f72008ad29d209e93ce29
CRs-Fixed: 2461403
The current OSIF logging macros use a "cfg80211" prefix. This is
confusing because that prefix should only be used by the Linux
cfg80211 module. To avoid confusion rename the macros to use an
"osif" prefix.
Change-Id: Id3273498f623d04beec879aa9d77c1d33986357a
CRs-Fixed: 2469485
Currently, ucfg_scan_register_pno_cb and ucfg_scan_get_scan_id
do not do null validation for scan object which can lead to null
pointer dereference. wlan_psoc_get_scan_obj_fl returns null in case
of invalid component id or null psoc and that null scan object is
dereferenced due to missing null validation.
Add null pointer check for scan object in ucfg_scan_register_pno_cb
and ucfg_scan_get_scan_id. Return zero scan id from ucfg_scan_get_scan_id
in case of null scan object.
Change-Id: I1aa1bdee001cace34e22ca11014455a0c7bcc462
CRs-Fixed: 2468518
Currently, wakelock apis are in wma. Create vdev resp wakelock apis
in target_if. Plan is to remove it latter from wma.
Change-Id: Ib410ee2404751544db2f291b466ff0d6ff248e8f
CRs-Fixed: 2441245
Add support to log the important events in
datapath, which will help in debugging the
datapath issues.
IRQ handler, Napi poll and srng access start/end
are the events which are currently logged.
CRs-Fixed: 2457854
Change-Id: Iba105b0e79443b670a01a929f999f94e00ea92f2
Currently for WDI 3.0, IPA runtime enablement is done in the
way that dp_ipa_enable_pipes API is first invoked and followed
by dp_ipa_enable_autonomy API. With SMMU S1 enabled, RX buffers
are mapped to IPA domain in dp_ipa_enable_autonomy. However RX
buffers could be provided to IPA once after dp_ipa_enable_pipes
and this could lead to possible SMMU fault.
Fix is to map RX buffers to IPA domain before dp_ipa_enable_pipes
API.
Change-Id: Ifdad2db6fa26da06a91b84de8f8603cbc779dd67
CRs-Fixed: 2467966
The driver automatically starts beacon reporting if it pauses the beacon
reporting for any reason other than disconnection. In specific cases,
userspace may not want the beacon reporting to be automatically resumed
after a pause. Add interface support for userspace to specify driver not
to start beacon reporting automatically after a pause.
Change-Id: Ia649bc7c7bd7dfe2ae106daecfaf96368151f89b
CRs-Fixed: 2471641
Do not check for msdu Done bit for raw packets as HW
does not set this bit for msdus spread across nbufs.
Change-Id: I9c2af01c6b55600511abeec9ab6fc185fcc6ef36
Currenly this function, is_sa_da_idx_valid(), called from dp_rx_process
does not take MC/BC packets into account. For broadcast packets e.g.
DHCP offer packets from some APs, this check may fail (incorrectly).
Thus dropping the broadcast packet, when it should have been passed
on to the stack.
Fix is_sa_da_idx_valid function by taking MC/BC packets into account.
Change-Id: Ibbb34134e997e0d5394dfa654be84b9fa43434a3
CRs-Fixed: 2466839
currently we are not unmapping the nbuf which was
already mapped in dp_tx_raw_prepare in failure cases
We always need to unmap and free the nbuf if its mapped.
Change-Id: Ia5e6a31a7aac356a934ff2496d0542039bc3ece7
CRs-Fixed: 2462518
A random crash may be caused by out of range access. Add MU
user id check to prevent out of range access.
Change-Id: I531d6c03024c4a6af4e0db97ea00d0874aaef387
Currently when user request comes to populate oem
capabilities, driver is populating all the channels which
includes disabled channels also and the logic to populate
the channels is incorrect. This is resulting in invalid
channel configuration for user space command.
To avoid above issue, use correct api which returns only valid
channels and valid number of channels and populate the channels
correctly in the output buffer.
Change-Id: Ib239d5d869ca9d010c85f444b83751d2e121625d
CRs-fixed: 2470193
The current calculation of head/tail pointer for
srng gives an index in the array by skipping
entry_size dwords.
The head/tail pointers are preffered to be the
index values like in the srng registers, which
brings them in alignment with the other usage of
head/tail pointers.
Fix the calculation of head/tail pointers for srng
by avoiding the division by srng entry size.
CRs-Fixed: 2469332
Change-Id: If9a167f3fac3cb39ebe59618e9ad2224d9e54bcc
Currently the driver checks whether the DFS channel is
in the range of acs channel list given, i.e the start
and end channel, which is not always correct as the channel
range does not imply that all channels in that range are present.
Fix is to explicitly check for the number of channels, and
compare each channel in the acs channel list with the DFS
channel.
Change-Id: Ib17c5e549a2c62652a6333d5d13ca8ff5a7b1674
CRs-Fixed: 2466228
Target assert seen due to host was not reaping the buffers. Therefore,
increase the CE2 entries from 32 to 512 for regular profile build.
Change-Id: I6160ecb070bb98dba0d858f2bef3522ad0b60aa3
CRs-Fixed: 2462117
This reverts commit Change-Id: Icb25be0f4ce60112ef6293f39f9dcc57ebc0288c.
CE2 pipe source ring size is configured as 1700 bytes in LM build where
2048 bytes in regular build. WMI msg size is always hard coded in FW to
2048 bytes in both build. WMI/QMI Pipe configuration is not matching.
Revert CE2 pipe configuration to 2k in the LM build temporarily till FW
updates wmi msg size based ring size configuration.
Change-Id: I2b66097ff9aa23c49fa77fa78b865828f244d108
CRs-Fixed: 2457381
Add API to fetch the vdev queue status and avoid enqueueing command
to serialization queue if the vdev queue is found to be disabled
Change-Id: If615b07dceaeb3113592f24355f254c8e70ca8a2
CRs-Fixed: 2470208
Currently when parsing interop VHT vendor IE, it will have OOB
read when only VHT cap IE is present.
Try to read VHT op IE only when it is present.
Change-Id: Id1919a0ed1df56ecef54d6cb663c10cbcae5065f
CRs-Fixed: 2453071
Propagation from qcacld2.0 to qcacld3.0.
The WMI CMD and EVENT of "get antenna isolation" are already defined,
but not used before in qcacld3.0.
Now, The host driver uses vendor command to get this information
instead of iwpriv command in qcacld-2.0.
The attribution of this feature is already defined in file
"qca_vendor.h". The name is "QCA_WLAN_VENDOR_ATTR_ANTENNA_ISOLATION".
So host driver will use vendor command
"QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY" to get the information
from lower layer.
Change-Id: I915768f622ddc9a70a95ce4fe952f19917a8f901
CRs-Fixed: 2447363
DTIM related commands do not have to be sent with WOW sequence as
they are able to be sent from other paths during runtime PM suspend
or resume, hence remove their runtime PM tagging. Besides, also tag
HPLB WMI_HB_SET_ENABLE_CMDID command for runtime PM.
Change-Id: Ib6cc8a9b8296dbba4d9e9017cfa75856cc9a29c9
CRs-fixed: 2469489
Free the Rx descriptors pool if there is a failure
in allocating memory for nbuf during
dp_pdev_rx_buffers_attach()
Change-Id: If4fcfcfdc2fe70c8c4753518ca020a7d8b0bd2b5
CRs-Fixed: 2464596
Previous commit Ia767643b51ffc780258e1d2fd0cd6a8a9e222ae2 wrongly
updated LF copyright years to 2019, keep the LF copyright years
as 2018-2019.
Change-Id: I214555e7deeea2fa3ab3a55af4c868538d5dd72f
CRs-Fixed: 2464759
Add the following vendor attributes under the enum
qca_wlan_vendor_attr_spectral_scan to support the configuration of
Spectral DMA debug.
1. QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DMA_RING_DEBUG
Enable/disable debug of the Spectral DMA ring
2. QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DMA_BUFFER_DEBUG
Enable/disable debug of the Spectral DMA buffers
CRs-Fixed: 2466432
Change-Id: If61ecb085534cbde5410c5a2b91aa1922579d902
Add change to release vdev reference only on successful removal
of active cmd from serialization active queue.
Change-Id: I2e14f7f53dc38388cdd05f029edc9329f9dd86a7
CRs-Fixed: 2463724
write module specific macros inside module/config and
use these inc files inside the kbuild of the module using those
macros.
Change-Id: Ide18770973f35d0e5c45e2474b24256107f40d8c
Add debug log in dp_tx_delete_flow_pool() to know if
all available tx descriptors have been released to the
pool or not
Change-Id: Id0684effd5c5c0b531bb2d4b3f08d929aaa85b5c
CRs-Fixed: 2463632
Read rssi_chain per nss per bw and from rx status TLVs
and update to host data structures.
CRs-Fixed: 2445933
Change-Id: I275e9e502a0a724410fc189ac293cadc8f2981e0
Add per module logging macros without function/line info
to avoid adding function/line info where it is not required.
Change-Id: I7621603b925e0762ef474c92e7b5cce641ceeefe
CRs-Fixed: 2468439
Use highprio system workqueue instead of normal work queue for
USB io_complete_work.
This is to avoid latency for receive and TX complete processing.
Change-Id: I34859a748b607d633b4905b3f06e3345029d4cba
CRs-Fixed: 2456887
Reduce log level from error to debug because a stats event can be
received unsolicited.
Change-Id: I11f3800594c6d623e72a214d832caa29666565a8
CRs-Fixed: 2466944
Add 165MHz support to wmi_host_channel_width to keep in accordance
with the wmi_channel_width structure in wmi_unified.h
Change-Id: Ib8aea0bc725a1c43b8fb7510cf86da4633143f69
CRs-Fixed: 2463171
Currently AC stats are getting updated for data tid as
well as non-data tid. Add check to update stats only for
data tids
CRs-Fixed: 2455781
Change-Id: I69d7a11f0101a5c3c6c7e5b0df3e190437990188
Clean up of CONFIG_MCL and optimise memory of peer_assoc_param
structure by use of bit fields instead of bool type
Change-Id: I4b06af69b7fd9af981a250c881d163ddb1f68fa7
CRs-Fixed: 2450763
If client is having non-zero tx/rx packets in last one second,
reset inactive time to zero, else increment inactive time.
Change-Id: Ie25fb43adec252e93ebc1bb1a7aa0fa207e7af1e
SMMU fault is seen in REO reinject path since skb buffer
is not mapped to IPA SMMU domain. Thus map skb buffer
to IPA domain in REO reinject path.
Change-Id: I293353bfce961324af6c6372611e8a57cc13f347
CRs-Fixed: 2463376
If any non authed clients send data packets then
AP should send Deauth Frames to STA. In Current code
we are finding VAP from pdev. And if MAC address are
same for VAPs on both radios then pdev will be wrong.
Because of that VDEV id was coming for non active VAP
and deauth frames were not going out of AP.
Change-Id: Ia28ea4143cec9c876313211962ab98b0e4028ee8
In the normal execution osif priv is freed when the object manager
is freed. Whenever there is a error w.r.t to creation of vdev,
osifpriv is deleted as part of vdev destroy. When this error
propagated to caller. Caller tries to again free the osif_priv
in the error path.
Hence set osif priv to NULL in error case to prevent any double
free by caller.
Change-Id: Iaa074ad39aa473e99ab2fd7b14194422f19c168d
CRs-Fixed: 2467327
qca6018 and qca8072v2 uses the same WCSS block and the source
files of qca8074v2 shall be used for qca6018 as well
This will also ensure all fixes for qca8074v2 gets auto
propagated to qca6018 as well.
Change-Id: I2ead316c7ed16b6ee315bda05ce82d268ba04bbb
Add a new request structure for Specteral control path.
This structure packages all the commands and their
required inputs. Response to the commands are filled
in this structure by the command handlers in lower
layers.
CRs-Fixed: 2446466
Change-Id: I3113e8721382d284b4e03e0f8fdab1e68d5cfaa1
Add support for iommu domain instead of mapping in
struct __qdf_device to support use of API
pld_smmu_get_domain in place of pld_smmu_get_mapping,
which is to be deprecated.
Change-Id: I89e9eea8ec7095a79493c0adca15c8034c21f79a
CRs-Fixed: 2464861
