The kernel-doc script identified a number of kernel-doc issues in the
hal/wifi3.0 folder, so fix them.
Note that there are a number of instances where public functions have
their implementation documented in addition to having their interface
documented, so remove the duplicate documentation since only the
interfaces should be documented.
Change-Id: Ic238c0f53658e8754882c83204ffae5ad713ec6b
CRs-Fixed: 3410624
REO_FLUSH_CACHE cmd
- flush_q_1k_desc as 1 – This will flush Queue, Q1k and QEXT in one go.
we need not give 11 cmd for each tid of the peer.
- forward_all_mpdus_in_queue to 1 in FLUSH_CACHE_CMD.
With this we need wait for aging threshold time.
Change-Id: I695ab48a50968872eb22024ba5c770f0e5a74a09
CRs-Fixed: 3384665
change allocation location for reo qref table.
per probe allocation results in mem alloc failure when
frame is fragmented
Change-Id: I5922bddebcd0577ba38734ae7d4194d726d825aa
CRs-Fixed: 3326520
In case of memory allocation failures,
return appropriate failure to the caller in hal attach.
Change-Id: Ifc319bbc274d8a13836968d460eb8067857363b8
CRs-Fixed: 3357203
Hal layer changes to handle Umac post reset
and post reset complete events from firmware.
Change-Id: Ib25427930aab25650731c87b38e2ef7e47ae98d9
CRs-Fixed: 3267222
Bifurcate the hal_get_reo_qdesc_size to corresponding lithium
or Berillium platforms.
This can handle difference, if any between them and later enhance
to set the qdesc size based on peer negotiation.
Currently for NON_QOS_TID, the BA window size is hardcoded as
256 for Li and 1024 for Be.
Also modify hal_reo_cmd_update_queue_params to accommodate higher
Block-Ack Window size. For this steal bits from pn_size and use
pn_size values as macros PN_SIZE_XX which is only 3 bits,
instead of 8bits.
Change-Id: If310175da579aa3a47a8b031a1774c6c8982d4b2
CRs-Fixed: 3125986
In WIN BE chipsets, replace the REO tid
queue programming in FW via WMI with writing to a
Host managed table shared by HW and SW. REO HW will
pick the tid queue address from the table indexed by
peer id and tid number.
Change-Id: I8107ca5116425538329b11ae3519f02b32573bac
In BE architecture, HW provides basic vdev stats support for upto
48 vdevs. For each vdev, there is vdev_stats_id which represents the
id of this vdev on HW. This vdev_stats_id is assigned by host and
is conveyed to HW at the time of REO TID Queue setup for the peer.
Add logic for allocation and deallocation of vdev_stats_id and
convey this id to HW.
Change-Id: If5611bf54d057ccf71c6444b5c79a26eb28df87e
CRs-Fixed: 3067843
Add iwpriv option 34 to dump the reo rx h/w descs
in DDR for debugging. This cmd will first send cache
flush cmd to REO for all rx tids and invalidate the h/w
cache. Henceforth ensuring that the reo status tlvs and
the DDR values are in sync.
iwpriv wlan0 txrx_stats 34 0
Add fix to ensure bar frame with 2k jump err code is
processed correctly using the REO error code instead of the
REO push reason.
Change-Id: Ia05be668343f3a5d4b3262b8d6a367a50875add5
CRs-Fixed: 2895965
Add code to replace usage of void pointers from
HAL layer and instead use appropriate opaque pointers
Change-Id: Id950bd9130a99014305738937aed736cf0144aca
CRs-Fixed: 2487250
Add code to remove void pointer usage for hal_srng
and use opaque pointer dp_hal_ring_t instead.
Change-Id: I6907f7376d7fe3c9180b8795bd96f49fead2ec64
CRs-Fixed: 2484404
Add code to remove void pointer usage for hal_soc
and introduce opaque pointer to be used intead of void
from dp layer into hal layer
Change-Id: Ia38571174c6ed79558d0f0c9cd1a0f4afaa66483
CRs-Fixed: 2480857
Some of the macro names defined in qca8074v1, are defined with
a slightly different name in qca8074v2, and few macros have the
same name in both headers but are defined with different values.
Fixed the same.
Change-Id: I5e948baf5326d1d8fdfa2bd7ee8aa072c710d17c
ba_window_size_valid and ba_window size support is missing
while sending wmi_peer_reorder_queue_setup. This is needed
for handing 256 BA which is not FW default.
Change-Id: I3218921c48c0f82225b7992076e73ac0acf7bd11
CRs-fixed: 2285423
Address the following issues in the hal folder:
CHECK: 'completly' may be misspelled - perhaps 'completely'?
CHECK: 'Initalize' may be misspelled - perhaps 'Initialize'?
CHECK: 'refered' may be misspelled - perhaps 'referred'?
CHECK: 'Retreive' may be misspelled - perhaps 'Retrieve'?
CHECK: 'settting' may be misspelled - perhaps 'setting'?
Change-Id: I98368830eeef7942c20380dbe6c638319a9860d9
CRs-Fixed: 2241575
Fix possible REO descriptor leak while draining REO
command ring by invoking command status handlers with
special error code.
Change-Id: I2fe5f60489b57a4b0a287e67e5610112f7292677
HAL REO flush cache command should use block resource only if cache
blocking is requested.
Change-Id: Ie52634cdb9908e4dfa12495dfc3d87a9d5d54c0b
CRs-Fixed: 2057946
