-Add validation check for MLD address as part of ML dev context
creation.
-Modify some function descriptions to clearly state the purpose.
Change-Id: Id049145351bdd790126e0ab522d24e4c399c0ad2
CRs-Fixed: 2976130
Changes to derive AoA phase values in RCC mode.
Add AoA phase calibration parameters to pdev_cfr. These
gets filled upon FW WMI event for every channel change.
HW reported AGC gain & these values are used to derive per
chain phase values.
FW to advertise support of this via service flag.
Change-Id: Ie239b939e50c60c5658ed0a82bae3243e5028e77
Check the below service bits and set in psoc if the service is supported
by FW.
WMI_SERVICE_RTT_AP_INITIATOR_STAGGERED_MODE_SUPPORTED
WMI_SERVICE_RTT_AP_INITIATOR_BURSTED_MODE_SUPPORTED
Change-Id: I13504958bf31b2d645d915b4db20719bdc9a4133
CRs-Fixed: 2969195
Add puncturing bitmap along with channel parameters
in vdev structures for filling during vdev start.
Change-Id: I5e5afd6e118ed9933e4d9c30e2ad65cd4259bca0
CRs-Fixed: 2958389
Add scan support for puncturing by extracting the puncturing
bitmap field in the EHT operation IE.
Change-Id: I221464f52bfce40b55344f995945836f80553579
CRs-Fixed: 2982502
Add WMI support for EHT puncturing by filling puncture
bitmap in vdev start and peer assoc commands.
Change-Id: If1d2541655558f22a96a741999ec4ff7348f695a
CRs-Fixed: 2982498
In the current implementation, csa_event_bitmap for CSA in the beacon
template WMI command is set to 0. Hence, the FW sends CSA complete event
to the host at the end of CSA complete.
Set the below values to csa_event_bitmap to get the current channel switch
count from FW to update the CSA/ECSA IE count in probe response frame.
1. WMI_CSA_EVENT_BMAP_ALL:
To get the CSA switch count event for every update to switch count.
2. WMI_CSA_EVENT_BMAP_SWITCH_COUNT_ZERO:
To get the CSA complete event only when the switch count becomes zero.
3. WMI_CSA_EVENT_BMAP_VALID_MASK:
FW to follow the bitmap for sending the CSA switch count event to the
host. Example,
0X80000000: Send the CSA event when the switch count becomes zero.
0X80000033: Send the CSA switch count to host for the count 0,1,4 and 5.
Change-Id: I8380d6badc3b84c72fde489e59b51b5ac122b97b
CRs-Fixed: 2978799
Currently there is no synchronization for flush log completion
between fw and userspace. When host driver receives command to
flush logs, it sends the command to fw and releases the control
of the userspace thread, it does not wait for the flush log
completion event from the fw and because of which user space
does not know when the host and fw completes the log flush.
To address above issue add a logic to wait for fw event of
flush log completion before host returns control to userspace.
Change-Id: I04fa0aead146d2b7b8627e4101c6dcd99d3947e9
CRs-Fixed: 2983387
In the case of Roam Start sub-state, if a new connect/disconnect
is received, an internal disconnect/actual disconnect is queued
in serialization and then the state is changed to connecting
or disconnecting, but if the disconnect command becomes active
directly the EV_DISCONNECT_ACTIVE is received in roam substates
but is not handled.
As EV_DISCONNECT_ACTIVE is not handled the disconnect is not
processed and VDEV can remain in UP state while CM assuming that
the disconnect is completed will allow a new connection which
cause 2nd BSS peer creation.
Fix is to handle EV_DISCONNECT_ACTIVE event in Roam sub-states.
Change-Id: I30180db2e15af9b793e52e891f86d54c55b7b5e0
CRs-Fixed: 2986468
Initialize the last_desc_cleared pointer to -1 not 0, and
also fix the check it should always behind tp.
Change-Id: I281e066d45a99ac99d4f3c4e0bcc3f65f14bb589
CRs-Fixed: 2987029
In Tx monitor code, BSS color needs to be retrieved
from the PPDU TLV so that it matches the value in
transmitted packet.
Change-Id: I6e1dce3992264ebea2db37b2d9c8f156a23df028
Cleanup reg_cache_channel_state and the
related code with it.
Also, changed the logic so as to compare
channel freq instead of channel number in
reg_modify_chan_list_for_cached_channels()
Change-Id: I424b6886ed18f73bae0d2b36e36a9ddc1819688b
CRs-Fixed: 2908016
Modify APIs target_if_dbg_print_samp_msg() and
target_if_dbg_print_samp_param() to use the
new formats for spectral_samp_msg and
target_if_samp_msg_params, respectively.
CRs-Fixed: 2961953
Change-Id: Ib0776c2189e9ca1dc33d38f2a7609aa6d15959ee
Add a new API free_samp_msg_skb(), to free
SAMP msg buffer, if error in phyerr processing
for 160/80p80 MHz modes. Call this API from
reset_160mhz_delivery_state_machine(), to
avoid redundancy.
CRs-Fixed: 2961987
Change-Id: I3a0488997e474fef6f4f57e3fbfd1a163c91ac7b
Add API target_if_spectral_populate_samp_params_gen2() to
populate fields in target_if_samp_msg_params, using
search fft report and target_if_spectral_rfqual_info
fields.
CRs-Fixed: 2961986
Change-Id: Iad970483f6183d2e52d97e6c3ddf8f146845fbe4
Add API target_if_spectral_populate_samp_params_gen3() to
populate fields in target_if_samp_msg_params, using
Spectral report, search fft report and spectral scan
summary report.
CRs-Fixed: 2945300
Change-Id: Idce57af9a198773491f6c6bc7303641ec0fb15a7
Modify struct target_if_samp_msg_params to only include
fields to fill the new SAMP message format, which
are not present in the per-session report-level
info and detector map structures.
CRs-Fixed: 2961956
Change-Id: I54f69bb63c5b64a59cb83b9f205c74c83475fc14
Add sscan_detector_list struct to store the number
of detectors and detector list for a given Spectral
scan mode and channel width, based on the target type.
Initialize this struct during target_if_pdev_spectral_init.
CRs-Fixed: 2961954
Change-Id: Ia920438429579c096349a0170d15e288d46cf9a9
Add API target_if_spectral_get_start_end_freq to set
start and end frequencies in the per-session
detector level map, based on spectral scan
cfreq1/cfreq2 and operating BW.
API target_if_populate_detector_start_end_freqs handles
population of the start and end frequencies per-detector,
in a session.
CRs-Fixed: 2961957
Change-Id: I68a052db6643d92c22e7ee671f4e46af33c2fa08
Replace numerical values with macros, for indicating
position and size of Spectral FFT report fields, in
target_if_consume_sfft_report_gen3().
Change-Id: I81994ebb0d642bc4cbebe2b24aabcae567ae6a9c
CRs-Fixed: 2945319
Modify prev_tstamp variable in target_if_spectral
structure to an array and index it based on detector ID.
Also, modify target_if_spectral_verify_ts() to include
detector_id parameter and compare current timestamp with previously
received sample on per-detector level, to check discrepancy.
Change-Id: I9f6382909ac0661323db54f160f1350cb8bd8153
CRs-Fixed: 2945318
Add target_if_spectral_get_num_fft_bins() to find the
number of FFT bins, from the Spectral FFT size.
It will adjust the number of FFT bins according to
Spectral report mode.
Change-Id: I8f81f2b784d71387f951c38701af6cf4443246e0
CRs-Fixed: 2945316
Add API to fill FFT bin start and end indices to the
detector map, depending on the values of cfreq1 and cfreq2.
This is to handle samples where the frequency of
Detector 0 is greater than that of Detector 1.
Fill the start and end indices for bins such that
the bin_pwr array is in increasing order of
frequencies but the order of detectors same as
that sent by the HW.
Add API target_if_update_session_info_from_report_ctx(),
to populate the per-session information in the
consume report context. This includes population of
start and end bin indices on per-detector level,
start and end frequencies on per-detector level
and cfreq1/cfreq2 on per-report level,
Change-Id: I044c6961e5f710089b0192876e8717f9127b497f
CRs-Fixed: 2945315
Find the last_raw_timestamp and adjusted_timestamp
as part of the FFT report processing API.
Change-Id: Ibc7fd524ca897ead3b4b8ca25ba6e6487154305d
CRs-Fixed: 2945307
Fill per-session information in per_session_det_map and
per_session_report_info, with per-report and per-detector
level information, respectively.
These intermediate structures help in filling the
SAMP message.
Change-Id: Ib194fde3567ce76710e010febf729746fedf7a2c
CRs-Fixed: 2945297
Add a new API target_if_fill_samp_msg, to populate
the Spectral SAMP message and detector level
information, using pdev_spectral_det_map
and per_session_report_info. Send the SAMP message
to upper layers when completely filled.
Change-Id: If43494fe4a09dbfeb9aea6cb0fa20b406d81e390
CRs-Fixed: 2945282
Refactor target_if_consume_spectral_report_gen3()
and divide the functionality into individual
functions.
This will be under OPTIMIZED_SAMP_MESSAGE flag, which
is unset by default for all profiles, till
development is complete.
Change-Id: I07e753dcaff6e81dfc8739df4e691d871c921581
CRs-Fixed: 2945171
A state machine checks if spectral reports are
in order for gen3 spectral 160/80p80. Currently,
this state machine has four states.
Modify this state machine to have only two states and
change associated APIs accordingly.
Change-Id: I754758fdf0529394c63fe371f54db79d52459999
CRs-Fixed: 2945161
Define a map with per-detector information, that is
keyed by the detector ID from Spectral FFT report.
Use per-detector information from this map to fill
the Spectral SAMP message.
Define struct per_session_report_info, for per session
info that needs to be filled at report level within
SAMP message.
Change-Id: I9f73bd904cc3d4cac42d21b89b1ceb586da7f911
CRs-Fixed: 2945158
Modify the API to include Validation and
processing of Spectral search FFT report.
This will be under OPTIMIZED_SAMP_MESSAGE flag, which
is unset by default for all profiles, till
development is complete.
Change-Id: I250867e2c002f491f51a36416ea9ca5ae0bc5508
CRs-Fixed: 2945132
Modify target_if_consume_sscan_summary_report_gen3() to
include validation and processing of Spectral summary
report.
This will be under OPTIMIZED_SAMP_MESSAGE flag, which
is unset by default for all profiles, till
development is complete.
Change-Id: Ice88b8e74ed714515f21b9b232aa0088fbb54d1d
CRs-Fixed: 2945124
Add regulatory API to support updating extended avoid
frequency list from HDD to regulatory component. Then
populate the new final current channel list and secondary
channel list.
Change-Id: Icda683c30bd7f8e51a5fd930712658ce35eff418
CRs-Fixed: 2975136
This change will receive SCS procedure based parameters from
the control path and the peer will start building it's database
for traffic classification using SCS procedures.
Change-Id: I4fd7db595e0645285a95d0561eb46343238fa337
CRs-Fixed: 2970408
While adding amsdu padding in last buffer (in case of msdu split
across multiple buffers) or single msdu buffer, address of frag at
0th index and size of the current frag index are considered currently.
Instead the address and size at current frag index are to be taken
into consideration. Make change to use correct frag index for amsdu
padding.
Change-Id: I3c5ac11cbdb67bc5264bc62425825583158269a0
CRs-Fixed: 2907489
Refactor the current SAMP message for memory efficiency
and scalability. Introduce per-span and per-detector
information structures, in place of separate static
arrays for each 80MHz segment in SAMP message structure.
Also, remove members in the SAMP message that are no
longer in use.
The new structures will be under OPTIMIZED_SAMP_MESSAGE
flag, which is unset by default for all profiles, till
development is complete.
CRs-Fixed: 2912498
Change-Id: Ie176f762cee811efa5c257faebc57af7f3166f85
The existing assertions for unmapped variable in
rx descriptor results in an undesired bug_on since
the unmapped value is 0 for active descriptors.
The fix is to modify this assertion so that bug_on will
be triggered only if the unmapped value is 1 in rx
desc.
Change-Id: I03b27e0e42ce3c42b9fa148da9258063b0209b08
CRs-Fixed: 2985248
Add API to get partner links information to proceed for ML connection
in best links selected in ML scoring.
Change-Id: Ief13bc19d8e44af601e2fe6397112d841bfcce28
CRs-Fixed: 2961883
