When component dependent functions calling from higher
modules or any other components, it uses ucfg APIs pattern.
Calling ucfg dependent APIs is acceptable for higher modules
like HDD, OSIF but for another components like DP to avoid
using ucfg APIs here, implementing component APIs for existing
ucfg APIs to other components like MLME, TDLS, Pkt capture in
DP component module.
Change-Id: Ib8857eeca6a88810d7875312ff6dc14ffb60bc70
CRs-Fixed: 3351486
This is applicable only when the roaming happens from 2.4 GHz/5 GHz
to 6 GHz AP.
The value is used to check if the 6 GHz AP to which we are roaming
(from 2.4 GHz/ 5 GHz) is better than current AP in terms of RSSI.
This checking is disabled if the value is set to zero.
Change-Id: I77f1183e1fd704dfa153841e669a20c9e75d0fe7
CRs-Fixed: 3353346
Add WMI interface(WMI_VDEV_SET_TWT_EDCA_PARAMS_CMDID) to
configure EDCA/PIFS param for LL SAP.
This configuration depends on edca_param_type.
If edca_param_type is 0 then host will configure EDCA param and
send it to firmware via WMI interface.
If edca_param_type is 1 then host will configure PIFS param and
send it to firmware via WMI interface.
Change-Id: I09f49474c0a698257d06aa4f1a17b56aae735fa5
CRs-Fixed: 3349447
IOMMU map and unmap memory regions related to direct link
into LPASS SMMU context bank for LPASS to access that memory
in direct link use cases.
Change-Id: I4414ad1f480a639ee2d8a0677326624cd959b2b4
CRs-Fixed: 3356587
For GTK offload functionality, currently only 16bytes of
KEK and KCK are being copied from the userspace.
In latest kernel, kek length and kck length are sent to the
host driver as part of set_rekey_data command. Therefore,
use this length to copy the kek, kck params in host driver.
Change-Id: Idef0247aaab22022a84898eca6eb2f010ca1bf1f
CRs-Fixed: 3345506
In WoW mode, roam auth event may comes before roam start event, so CM
isn't in ROAMING state at that time, can't assume ROAMING state.
Change-Id: Ibf868db1ca0f9863d4beae4c83227cf04fe55adb
CRs-Fixed: 3357115
In wow_get_wmi_eventid(), the reason to event id mapping fills
the wrong command id (WMI_ROAM_PREAUTH_STATUS_CMDID) instead of
the event WMI_ROAM_PREAUTH_START_EVENTID and.
Since the event WMI_ROAM_PREAUTH_START_EVENTID will not be
piggybacked, remove the reason WOW_ROAM_PREAUTH_START_EVENT from
wow_get_wmi_eventid api. Fix the documentation of setting the
WOW_ROAM_PREAUTH_START_EVENT bit in pmo wow bitmap.
Fix invalid event id mapping for WMI_TDLS_PEER_EVENTID also in
wow_get_wmi_eventid().
Change-Id: Ifd08dc94cda22d9de662ef15b74cb19571007052
CRs-Fixed: 3355578
For SAE-EXT-KEY AKM with group-21 pwe, the PMK
length is 64bytes. Therefore, increase the max
size of the PMK to 64bytes in host to facilitate
PMK storage and PMK offloads.
Change-Id: I777a31acd56073d6a0312c47d95fe7d155b06fc6
CRs-Fixed: 3353102
The kernel-doc script identified some documentation issues in
wlan_dp_priv.h, so fix them.
Change-Id: I38bc7293d4ef7b34bbc40930b2c1e4daaff4a13b
CRs-Fixed: 3352263
Driver adds a BSSID to the reject list due to multiple
DE authentication triggers from associated AP. If DUT tries the
FASTREASSOC command for the same BSSID multiple times, the host
triggers disconnection to handle roaming failure, and this results
in DUT losing the current connection.
To keep the current connection DUT should not trigger a roaming
event if the BSSID is already added to the reject list in the
host.
The fix is to add logic to avoid the FASTREASSOC trigger command
for AP(s) present in the reject list of HOST.
Change-Id: I315da12b3f93d5d9d67396a5dd9e12fa2be5fda0
CRs-Fixed: 3328847
Add channel tx max power factor to existing ACS channel weight logic,
so if AFC available can automatically select Standard Power channel
which has higher 6 GHz tx power and better performance.
Add SAP best channel selection callback when AFC triggered DCS,
DCS module will invoke this callback and dynamic switch to best
channel/bandwidth if possible.
Change-Id: I300057c2b11d0b818f4e20ba51d6ab9b82f6a3ff
CRs-Fixed: 3204199
During the roam scan, if there are no desired APs found in the partial
frequency list, an immediate full scan on all the supported frequencies
is initiated as a fallback. This would include the 6 GHz PSC
frequencies by default.
This attribute allow that behavior to be modified to include PSCs only
if 6 GHz use has been detected in the environment.
Change-Id: I6dc380419f14b920737fd87cd9a487c28364563b
CRs-Fixed: 3351697
When vdev_mac_entry is NULL, update the hw mode index as well
to avoid mismatch between host and target.
Change-Id: I67bd91af8c72dcc468c128e266e7074308de04c0
CRs-Fixed: 3342565
The kernel-doc script identified several documentation issues in
components/coap, so fix them.
Change-Id: Iec06bb65071e4d9b1ee8787da84e66ba4ffb0028
CRs-Fixed: 3352334
Adds support to parse and validate T2LM IE,
based on tid to link mapping pick the
association link for MLO connection.
Change-Id: I8ea23ff10f2a637148686f1e2194fd8cc1f4fb90
CRs-Fixed: 3344675
P2P OTA rx frame indications are logged in info level.
This causes excessive logs to kernel logging when peer
sends multiple frames back to back. Rate limit the logs
to avoid excessive logs to kernel logging.
Change-Id: Ia97aef1490b8dbb759c27ba60c48c93ad7831497
CRs-Fixed: 3352880
Roam sync may get aborted on link vdev due to multiple reasons.
Link scan entry being not available at host is one such case.
del_sta response of BSS gets dropped due to stale link-RSO state
and results in disconnect timeout.
Reset the RSO state machine of link vdev when roaming is aborted
to allow cleanup the vdev in next disconnect.
Change-Id: Ie584c5b7ccae989cf2ce64e85da26d1b3526f1e0
CRs-Fixed: 3352543
Host driver tries to fetch info of disabled ML links from
pm_disabled_ml_links by passing arrays to fill vdev_id_list,
freq_list and ml_idx list. Disabled + enabled links together can't be
more than MAX_NUMBER_OF_CONC_CONNECTIONS from functionality perspective.
But static analyzer tool complains that there are chances for out of
bound access of the given arrays while filling the indexes. Add checks to
avoid any such possible out bound access.
Change-Id: Icff77f9700c782f05e10c1d0aee8e1f238b0cc94
CRs-Fixed: 3344532
User can include/exclude the frequencies in roam full scan that
were already scanned by the previous partial scan, using the new
vendor attribute introduced as part of roam vendor command.
Host sends the configured value to firmware.
As per current implementation of roam scan, if there are no APs
found during partial scan, immediately a full scan will be
initiated as a fallback. This includes all channels that were
already scanned as part of partial scan.
This attribute controls the optimization, to exclude all channels
which are already scanned as part of partial scan.
Change-Id: Icd6381b4daadcfe32dabda131ae92e2e32f07f1d
CRs-Fixed: 3343657
Move Action OUI INI config to component.
Add ucfg API to load/parse the configuration.
Change-Id: Ibaab5428bc575394b9a5b464639d24f80f042e93
CRs-Fixed: 3310697
Currently, If AP doesn't allow Prohibit to be set and user tries
to enable prohibit, host doesn't send command to FW to enable prohibit
but doesn't send failure status to user space.
Fix is to send failure status to userspace in case prohibit is not enabled.
Change-Id: Ic983b85d27e16314f63c02f88d3b1689d587d622
CRs-Fixed: 3344607
Clean up code for sme_get_empty_scan_refresh_period_global() and
sme_get_neighbor_scan_refresh_period() apis
and replace it with ucfg api.
Change-Id: Iaa511024467f45dc408da3db202b25f9b5276453
CRs-Fixed: 3335898
Clean up code for sme_get_roam_opportunistic_scan_threshold_diff() and
sme_get_roam_scan_home_away_time() apis and replace it with ucfg api.
Change-Id: I7de3bf3faff990cbf667cb8106044a33f16f3a46
CRs-Fixed: 3335898
Clean up code for sme_get_wes_mode(), sme_get_is_lfr_feature_enabled()
and sme_get_is_ft_feature_enabled() apis and
replace it with ucfg api.
Change-Id: I7715ba361264fcb2c0c93d8d073813538347dd31
CRs-Fixed: 3335898
Clean up code for sme_get_neighbor_scan_max_chan_time() and
sme_get_neighbor_scan_max_chan_time() apis and replace it with ucfg api.
Change-Id: I8a9de18f22e352ed8c64f415fd0455f64227a857
CRs-Fixed: 3335898
Clean up code for sme_get_roam_rssi_diff() and
sme_get_is_ese_feature_enabled() apis and replace it with ucfg api.
Change-Id: I226efbcf8ecd44b08684a3e17e2db987c169946d
CRs-Fixed: 3335898
Clean up code for sme_get_empty_scan_refresh_period() and
sme_get_neighbor_scan_min_chan_time() apis and
replace it with ucfg api.
Change-Id: I372fcbcf4f96af2c642a5fe93c0f8e2ce98174ea
CRs-Fixed: 3335898
Clean up the code for sme_get_neighbor_lookup_rssi_threshold() and
sme_get_roam_rescan_rssi_diff() apis and
replace it with ucfg api.
Change-Id: Idc7503eaa316d68dc05aba8345970ace7bc8ad45
CRs-Fixed: 3335898
Clean up code for sme_get_valid_channels() and
sme_get_roam_intra_band() apis and
replace it with ucfg api.
Change-Id: Ic2f07e2193186d1e1ac81f6e5909417c10ab9c89
CRs-Fixed: 3335898
If sta connect to an AP at 5 GHz DFS channel, P2P-GO open and would
scc on the same channel. We don't expect filter out the DFS channel
from PCL list.
Change-Id: Idd8707d7aea908d17d720b54c0228a131cf17fcd
CRs-Fixed: 3345700
The mandatory channel policy was created for STA + SAP 2 vdev concurrency
case. For MLO STA (2+5/6) + SAP 3 vdev concurrency case, use general
force SCC logic until the requirement is updated in this case.
Change-Id: Ifca16824d53f272adc5b6ff763c1b4cc08af6a2f
CRs-Fixed: 3347722
When same NAN commands are issued back to back, serialization
module rejects the commands when there is a command present
in the pending queue. But the memory allocated for the NAN buffer
is not freed in such failure cases.
Free the NAN buffer in such failure cases to avoid memleaks.
Change-Id: I1d1f9c077d4b6239f4400d9b3ed185e63e471b56
CRs-Fixed: 3341229
To avoid assignment before null check for vdev.
First check null vdev and then assign operational
mode value.
Change-Id: Ifbff1f79f04d51dddf6a6c1aec27793389516045
CRs-Fixed: 3340858
Currently, if SR (Spatial Reuse) is supported by AP and then
STA roams to another AP then host needs to parse SR IE and
send events to userspace and commands to Fw based on below
scenarios:
i.) Roamed AP doesn't support SR: If roamed AP doesn't support
SR then async event with SR disable is required to be sent to
userspace.
ii.) Roamed AP supports SR: If roamed AP supports SR then below
validations are required.
a.) existing thresholds are in range of roamed AP: Send SR enable
command to FW with previous thresholds , as FW disables SR during
roaming.
b.) existing thresholds are not in range of roamed AP: then decision
will be based on whether threshold is provided during SR enable command
or not. If threshold is provided along with SR enable command then send
disable to userspace and in other case update thresholds as per roamed
AP , send async event to userspace with new configured values and send
enable command to fw with new thresholds.
Change-Id: I0c39de349c0f723d49d510c6e8ba09dcb98c6d17
CRs-Fixed: 3316985
Add edca_param_type ini to configure edca or pifs param for
LL SAP.
If edca_param_type is 0 then set edca param or
if edca_param_type is 1 then set pifs param.
Based on this ini, host configures either edca or pifs param
and send it to firmware and earbud via OTA frames.
Change-Id: I46a5efea4f516b145d04d8b8ad79c5d47ceb7f89
CRs-Fixed: 3344875
When dual sta connected as SBS mode instead of dbs mode, driver didn't set
pcl per vdev, so dual sta had same PCL in firmware, MCC may happened after
roaming.
Fix:
1. Host pass roaming MCC disallow flag to F/W by checking primary vdev id.
2. For platform SBS supported, when doing dbs or sbs, send PCL from table
to F/W directly, allow SCC and SBS<->DBS roaming, don't limit to intra
band, only avoid mcc case if no primary vdev.
3. Use policy_mgr_concurrent_sta_on_different_mac to replace
policy_mgr_concurrent_sta_doing_dbs, add logic to consider SBS when set
PCL to F/W.
4. Change dual sta PCL table to remove mcc channels.
5. When STA channel switch, also update PCL to F/W.
6. For roaming case, do vdev level PCL update for all sta after connection
update in policy mgr, or wrong PCL is got.
Change-Id: I631c84c96da2bba4011b69e4c076db174205c874
CRs-Fixed: 3336768
While SAP doing CSA, NAN enabled, SAP tries to do CSA to force SCC with
NAN in scheduler thread, since last CSA in progress, scheduler thread is
blocked to wait last CSA finished, CSA timer can't be handled in scheduler
thread any more, last CSA can't finish, deadlock happens until timeout.
To fix it, let SAP force scc with NAN logic run in work thread instead of
scheduler thread.
Change-Id: Icb774ffcfc70f279ba3b18b3c5cd4a169180e99b
CRs-Fixed: 3344905
In current design of sta+sap scc on indoor channels, the NO_IR
flag of all the indoor channels are removed during init.
Then, based on the operations on the SAP interface, the
SAP concurrency will be decided in host driver.
However, some userspace p2p applications, do not query the
pcl list from driver, therefore standalone P2P GO are sometimes
brought up in indoor channels.
To fix this:
1. Upon STA connect: Remove the NO_IR flags only from the
indoor channels to which the STA is connected.
2. Upon STA disconnect: Add the NO_IR flag back to the
disconnected channel.
3. Upon STA roam/csa:
a) Add the NO_IR to the new channel if it is indoor.
b) Remove the NO_IR of the previously connected channel
once the SAP/GO(if present) moves out of the indoor channel.
4. The NO_IR flags should be removed for all the bonded channels
on which the STA is active.
5. In indoor concurrency cases, add logic in the SAP start to
limit the channel width with the STA interface bandwidth. Since,
only the bonded channels are active channels.
Change-Id: Ib0b30e1f17d0eb944c72b26bb679bf7447b9032f
CRs-Fixed: 3296208
User can configure roam hand-off delay value using the new vendor
attribute introduced as part roam vendor command.
This change gets the configured value and sends it to firmware.
And firmware delays the roam Hand-off (in msec) by the specified
duration to receive pending RX frames from the current BSS.
Change-Id: Ic328c077cba06532ee8ffed12cde072c816b92e0
CRs-Fixed: 3329964
Pcl len is always 0 if existing interface is not LL SAP.
As part of fix, return original pcl len if LL SAP is not present.
Change-Id: I51b308483364f40da03f6f9f4daea1a1f3b72019
CRs-Fixed: 3342540
The kernel-doc script identified several documentation issues in
the interop_issues_ap component, so fix them.
Change-Id: Ic603071529ead8b6e884b6d7e43eb98186136162
CRs-Fixed: 3340470
When firmware attempts roaming to an MLO AP, it tries to find
the complete ML info(all links info) either through ML probe
response or beacons from all the links. It forwards all link
beacons(or ML probe response) to host as part of roam sync
indication through roam sync frame event.
Add support to fetch both link beacons and add them to scan db.
If firmware sends ML probe response, generate link probe response
as well and add it to the scan db.
The link scan result can be used in link connect in case of
hybrid roaming like OWE, 1x,..
Change-Id: Ic8457a5630441d6fd3faeb4791c79422db787f94
CRs-Fixed: 3335225
