Sometime DP might receive a exception packet with
already deleted peer id. Added a check to avoid sending
such packets.
Change-Id: Ib43d55c7930e4ddc7550d486505a56cb48e85afe
CRs-Fixed: 3285034
Add support for,
a) HE MU radiotap information
b) Multi sta BA frame generation and
minor fix,
a) handling timestamp NULL,
b) update NSS and other field in radiotap
Change-Id: I7a8b95328779f967b9e63ff8048242412ab472b0
CRs-Fixed: 3270361
In the case of finite Spectral scan, the spectral scan will be stopped in
the target once the requested count of spectral reports got generated.
The Host will not be notified of this stop scan. To synchronize the Host
data structures in accordance with the target, we explicitly stop the scan
once the last report is received. In the current implementation, the
stop_scan() is called at the beginning of the last report processing and
we continue processing the last report. As part of the last report
processing, we could access the data structures that were reset during
the stop_scan(). To fix this, stop the spectral scan at the end of the
last report processing.
Change-Id: Iecfa4e72ccbedae77ee2a57e9283910e980121d5
CRs-Fixed: 3287136
rx_bank_id is newly added in IPA driver to represent bank id
field in TX descriptor for BE chipsets. Therefore add same qdf
definitions for DP layer to pass the bank id to IPA driver.
Change-Id: I7efe7ec6917eab131e2b441a502cdb25e682a88a
CRs-Fixed: 3291711
Add call to API to calculate the moving average fo delay for
the following
NW Delay
Wifi SW Delay
Wifi HW Delay
Change-Id: I35afa4d83e474b0173cc1f4b9b6456b9fe2c963c
CRs-Fixed: 3286176
Based on the new requirement process tx and rx rate counts
from peer stats response and send these stats to user space
as part of big data stats.
Change-Id: I988f0d6cf6a3537f31433d4f57280336ab58bc38
CRs-Fixed: 3289789
Based on the new requirement, fw fills the tx rate count and
rx count per mcs index in the peer extd stats event.
Add logic to parse tx rate count and rx rate count from peer
extd stats event.
Change-Id: I13382366f52964b83eb26473fa03267ac7309bb9
CRs-Fixed: 3289779
Currently if ENABLE_HOST_TO_TARGET_CONVERSION is defined, WMI_HOST_PEER_*
can be translated to WMI_PEER_* through API
convert_host_peer_param_id_to_target_id_tlv.
If ENABLE_HOST_TO_TARGET_CONVERSION is not defined, WMI_HOST_PEER_* in
common code is sent to firmware directly, which is incorrect.
Define WMI_HOST_PEER_* to WMI_PEER_* if ENABLE_HOST_TO_TARGET_CONVERSION
is not defined. Then WMI_HOST_PEER_* can be used in common code.
Change-Id: I50aa604d8822a81eed223c8551e542007929424e
CRs-Fixed: 3271470
The packet start offset configuration is common
for both mission mode and monitor mode. Hence if
the packet_header tlv is not subscribed for the
regular mission mode, the packet start offset for
monitor mode also gets affected, where packet_header
is subscribed.
This causes a loss of 128 bytes in the packets
captured in monitor mode.
Fix this issue, by setting the packet start offset
based on the driver operation mode.
Change-Id: I0a0e431278bef519534c2b1be87797d9b047525c
CRs-Fixed: 3292130
Some p2p device include invalid RSN IE in wildcard probe respone
frames in p2p discovery. Do not drop it because the wildcard
SSID entry will not be used to do association.
Change-Id: I1e390509931094d9d9a55d2caef825c5772a086b
CRs-Fixed: 3282030
delete QCA_TEST_MON_PF_TAGS_STATS to enable stats by default
and just use flag to enable debug nbuf_head dump
Change-Id: I0b0bb627f4d597d28181a11c38fa18b191210da4
CRs-Fixed: 3278411
bank id is newly added in TX descriptor for BE chipsets. As such,
with IPA Offload enabled, IPA needs the bank id information to do
offload WLAN TX.
From WLAN perspective, bank id is designed to be used on a per-vdev
role basis. E.g. STA vdev and SAP vdev have separate and different
bank profiles.
However from IPA perspective, bank id needs to be on a per TX ring
basis, because IPA GSI FW is not able to identify STA or SAP vdev
role on a per-packet basis.
Hence initialize last HOST owned bank id profile for IPA usage.
Change-Id: I0cf71b638f5999905069aff0551d8ebeb5477e17
CRs-Fixed: 3289558
Currently RTPM refcount is not released if force
wake fails. This leads to mismatch in number of
RTPM get and put during RTPM de-init.
Fix this refcount release if force wake fails.
Change-Id: Ia6d2b4541347615afe46c79ae76114009f7805ad
CRs-Fixed: 3289451
In order to handle raw frames in mesh mode pass the valid
txrx_peer to dp_rx_process_rxdma_err()
Change-Id: I24c697c8e55533ecc6ff1992c0da7bf101c8d6cc
CRs-Fixed: 3281431
sgi is getting overwritten in cmn usr TLV.
Add check if sgi and ltf_size is already set.
CRs-Fixed: 3279670
Change-Id: I8260eb71230b2c218e45460adc8f404a19eefa80
1. Changes to get correct write address in hal_get_window_address_5332.
2. Fix for monitor init crash - Added dummy entries to match the
ring_id.
Change-Id: If59b1c231d4595a95e7c1f02de1dbe0ce27a8805
CRs-Fixed: 3268933
If get scan filter for link vdev, that means the MLO STA has
more than 1 link, do not filter the link vdev's scan filter
channel list. Link that is causing MCC with legacy STA can
be disabled in post conenction.
Change-Id: I4aafb7168e60bf158904d3b1c4a4c42d4eaeb126
CRs-Fixed: 3285312
1. Changes to support cmem write for AHB devices.
2. Interrupt enablement issue - Incorrect CE address was given which is
fixed.
3. dp_soc_init failure - dev_base_addr of Miami was NULL, which is
fixed.
4. Missing interrupt error logs - Added dummy entires for missing
interrupt in DTS and changes to support shared IRQ in wifi-drivers
Change-Id: I00e7666b2b978c35b5ccec5da21bf442ed0a7998
CRs-Fixed: 3268936
Currently HMT, HSP_KAILUA, HSP_WAIPIO, NETRANI_HL, NETRANI_MSL
device ids are not present in host driver code.
To address this issue add these device ids in qwlan_hw_list array.
Change-Id: I6ab7399545204e1df6ada836b7ab092fab064b38
CRs-Fixed: 3271889
In case when ACK_BA_STATUS is not received, the ppdu phy tx time is not
getting calculated even though the media is used for the ppdu.
Add fix to ppdu phy tx time irrespective of ACK_BA_STATUS
Change-Id: I23d29b2d282edf6e5d49ce18aecd81e5239a118b
CRs-Fixed: 3288380
Limit error logging when ce id does not match to tasklet_entry's ce
id. And dump all tasklet entries info to get more clue in the next
cycle.
Change-Id: Idcd9cb6ff45ef8e05fcea33cad48fa464e4f9a1e
CRs-Fixed: 3284277
Add return value for qdf trace rate limited function to give
the caller a chance to know whether the current logging message
is bypassed or not. This allows the caller to skip additional
logging when logs are being rate limited.
Here is the value for this return:
false: log is not limited, output is normal.
true: log is limted, will not be output in the log.
Change-Id: Ia5ae0e5676072142c3daf9b64a9bcf609692abf2
CRs-Fixed: 3284268
To support SMMU debug framework for IPA offload, change the
caller IPA component where SMMU map and unmap are done.
CRs-Fixed: 3255423
Change-Id: I5276c0b41c8e315940e8d4f5d3082d45b08b571b
To support SMMU debug framework, add new definitions
and add logic to track the mapping and unmapping of
a buffer via nbuf tracker.
CRs-Fixed: 3255423
Change-Id: I0b9e2828e6cd5e3204b6bba57af8806c4d080b32
Debug framework for tracking the SMMU mapping and unmapping of
skb buffer when IPA offload is enable and IPA_SMMU_NBUF_TRACKER
is define.
CRs-Fixed: 3255423
change-Id: I8966097945b33cb866f4642b98b3d1a4beabfad7
pm_responder_bit was not getting parsed as part of twt setup completion
and stats event in case of WLAN_TWT_CONV_SUPPORTED. Added support for same.
Change-Id: I46f88299850ca3f4402780c302a5cd47ffbc1dc7
CRs-Fixed: 3245871
Add cdp function to get the peer extended rate and link stats.
This change is to support user level command to flush mld/link
peer extended link and rate stats.
cfg80211tool wifiX get_peer_extd_rate_link_stats <mac_addr>
Change-Id: I20cd2b38b242008b95aedc5f9914088a149093dd
CRs-Fixed: 3278042
Add fix for double free in Reinject handler. Issue is seen when mesh vap
is present.
Change-Id: I288b1131974c8a3edb83c1b3b2a7a856c4ccbcbf
CRs-Fixed: 3276670
Currently 2K Tx buffers are allocated at init time and 6K Tx
buffers are allocated at mon vap creation time.
Changes are done to move Tx buffer allocations to 0+8K model,
where allocations are done when enable cmd is triggered.
CRs-Fixed: 3284106
Change-Id: If0a112b8138f2be1db8f764fd7aa4ef12f274bb7
When FW was enabling WOW, a ring HP update interrupt is seen
which led to fw crash.
This change records any PCI writes that went through during
runtime suspend from host.
Change-Id: I3c44760ebaf49a131b483813522fe3e451957215
CRs-Fixed: 3280166
