The 6GHz security check is enabled by default. Disable the check
if RF test mode is enabled.
Change-Id: Id6af514f6a31f6351b1b0d784c2b9f7d301496c0
CRs-Fixed: 3040621
When wifi is turned off, if the connectivity logging queue is
not empty, the wlan logging thread tries to dequeue the record
and send the logging event to the userspace. While performing
dequeue operation, the records from queue are copied to temporary
buffer before read pointer is incremented. There could be a
condition where this buffer is allocated in ini domain after stop
modules is done and freed in active domain if the wlan_logging
thread is preempted during stop modules.
So to avoid this domain mismatch, start the queue only if
start_modules is done and stop the queue after stop modules
to avoid dequeue being done during/after stop modules.
Change-Id: Ied8c36b19bc66474d3c4d8f913f3e3dbf9a574a0
CRs-Fixed: 3035644
Add support to parse roam frame info TLV.
Add changes to send the BTM request logging event.
Change-Id: I24fab5fc0ec204fce74cf822742b5a44b0e7774f
CRs-Fixed: 3013489
KERNEL_SUPPORTS_NESTED_COMPOSITES := y is used to enable nested
composite support. The nested composites support is available in
all GKI & QKI kernels beginning with
5.10.20, but unfortunately is not available in any upstream kernel.
When a QKI kernel is used the flag is not set explicitly on the
kernel sources. Current logic sets the flag for GKI kernels only.
So extend the logic to set the flag for QKI kernels also.
Change-Id: I96aa36628aaf66f194c14f8883674da205220117
CRs-Fixed: 3041134
PMK stale entry will be updated in driver by framework after
disconnection with AP. Since there is no connected profile
in driver no MDID is associated. On new PMKSA addition in
driver it will check for cached entry based on MDID and
remove older one. This commit associates MDID to the cache
entry from the scan result if no connected profile is
present.
Change-Id: I9e8362387a53f622b9c52c4ba994939cabf244aa
CRs-Fixed: 3030376
Android S VTS test case GetLinkLayerStats_1_5 need get interface time
slice duty cycle info. VTS will get it over vendor command
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET.
So, we need put time slice duty cycle percentage in structure
wifi_interface_info.
Change-Id: Iff644b4b1ed6dd34badc2008d2957c98e0207aa6
CRs-Fixed: 3040005
Using the HW capability from extended regulatory
capabilities (reg_cap_ext), fill the SMM/DBS/SBS
frequency range in such a way that if the frequency
range these for a particular mode is not at all
present in these reg_cap_ext, then maximum possible
range is selected for that Hw mode.
For SBS mode:
Derive the channel such that 2Ghz is supported only by
Mac0, and if the frequency range of 5Ghz and 6Ghz are
intersecting then derive the the 5Ghz/6Ghz range/
For DBS mode:
Mac0 Supports all the 2Ghz range and Mac1 supports the
maximum range derived from the reg_cap_ext of both Mac.
For SMM mode:
Derive the Freuency range based on supported bands.
With these changes, pure mac freq ranges can be stored
and used easily.
Change-Id: Ied7f81654ef6d135e14b053db9516b4cb591eb76
CRs-Fixed: 3034653
When band is changed from dual-band to single band
(2G only):
1. host need to remove IDLE & BTC trigger bits from
WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID
2. Send WMI_ROAM_IDLE_CONFIG_CMDID with enable=0
When band is changed from single band (2G only) to
dual-band:
1. host need to add IDLE & BTC trigger bits from
WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID
2. Send WMI_ROAM_IDLE_CONFIG_CMDID with enable=1
and with default configurations.
To configure the above value in FW, send an RSO
update to FW whenever host receives set band command
from the upper layer.
Change-Id: I5a78deee713ff8514640d1867098e4045b77a231
CRs-Fixed: 3033081
Enable ROAM_TARGET_IF_CONVERGENCE to enable the
wma to target_if roaming convergence code.
This is a temporary change and shall be reverted by
removing the define ROAM_TARGET_IF_CONVERGENCE usage and
the legacy code(i.e. code present in else part).
Change-Id: I840573b4699f23b7633b8049741a57a0dda975a7
CRs-Fixed: 3039950
Currently, reject_ap_info is used at many places and memset is
not done before filling it. memset the buffer to avoid reading
garbage values.
Also, modify the current initialization of ap_info in
cm_add_bssid_to_reject_list to memset.
Change-Id: Ic0fabc1733c4ea63dccb2e45b2a2dc37791e594d
CRs-Fixed: 3040299
OFDM and CCK flags should not be set based on frequency. These
flags are already filled in pkt_capture_rx_get_phy_info based
on preamble.
Change-Id: Ie809ee2e3546ed69bedab12d73d408b379d6b73d
CRs-Fixed: 2965290
CFR only works when DUT as STA and connected to AP. But, host doesn't
stop CFR if CFR started and disconnect to AP. So add this change to
stop CFR once get disconnection event.
Change-Id: I5a616dbe4c35311fb260514a8d33ed9a1361c514
CRs-Fixed: 3026715
Currently, the ROAM event is posted to scheduler thread when it's
received from firmware. This is done to avoid processing the
complete event in IRQ context as the same callback gets called
from IRQ context for WOW events(WOW_REASON_LOW_RSSI and
WOW_REASON_HO_FAIL). Posting the ROAM event to scheduler
thread may introduce some additional delay in processing it back
as there would be a context switch.
If this ROAM event carries ROAM_START which is followed by a
ROAM_SYNC event, there is chance to process the ROAM_SYNC
before ROAM_START as ROAM_SYNC would be processed in the same
context whereas ROAM_START needs a context switch. This results
into an invalid connection manager state after processing
ROAM_START event, which results a connection failure.
Same is applicable for ROAM_PMKID_REQ_EVENT and
ROAM_VDEV_DISCONNECT_EVENT. Avoid reposting the same to scheduler
thread.
Change-Id: Ic4fc1b3baf12e4ceee9a0975ebfee77fb88ab6f0
CRs-Fixed: 3033657
if g_sta_sap_scc_on_dfs_chan is 1, SAP can't start on DFS channel except
there is STA/P2P client on it.
When SAP start alone, when select SAP channel after ACS, need remove DFS
channel correctly by valid check.
Change-Id: Ie500816bb0aeae3efd18767e64901bf19bedd6fc
CRs-Fixed: 3036095
Restrict the dequeue logic to send only 20 logs per second
to userspace. Add check to see if queue is empty before
trying to dequeue.
Change-Id: I778556c649d123718cf76c943c5b2ed7f6c6e8e5
CRs-Fixed: 3014554
Add new files for connect/roam logging. Add changes to
initialize the logging buffer.
Make changes to support enqueue/dequeue log.
Define enums for MAIN_TAG, Sub TAG, category.
Add structure definitions for logging buffer.
Change-Id: I1d283fcf464da90d4f5533214d480ddda156ec27
CRs-Fixed: 3013486
Currently driver does not update HE connection width
correctly when it indicates about assoc indication from
lim to hdd. Which results in incorrect indication of chwidth
to hdd.
To address this issue update HE connection width correctly
from lim to hdd.
Change-Id: I9ccc4435dc621ed3698f944fd2821afd648f2d1a
CRs-Fixed: 3028799
Higher Bandwidth support 80/80+80/160 is enabled on 2.4G Band.
Modififed the population of peer capability logic to disable
80+80/160 based on the band.
Change-Id: I8319ef3fcd93676bca1115a088a926a772545d24
CRs-Fixed: 3030837
Currently wifi creates kobject for dump in progress feature without
any feature flag, since this kobject is for dump is progress
feature and there is already feature flag available for this
feature so move this code under feature flag.
Change-Id: Ib1155194dbec434c3ecd9949514c6c9931e3e661
CRs-Fixed: 3036752
Currently average rssi is filled in rx packets as rssi not
available in rx tlv, but now ucode is providing rssi value
in rx tlv so do not fill average rssi as rssi is already
filled from rx tlv in packet capture component.
Change-Id: I67e5e4cf6f0eade0640012802d79fe92b87de001
CRs-Fixed: 3022166
Add support to allow/disallow three port combinations on
same band based on PCL table
Change-Id: Id2e9ad7d17bab6ea0aff6913b25f0eb330dc6c13
CRs-Fixed: 3028527
INI g_enable_go_force_scc states the force MCC to SCC mode.
Mode 1-strict: Implement force scc strictly as part of start bss
Mode 2-liberal: Turn on p2p go on provided channel and move
first p2p go to the new p2p go channel after set key.
Currently for p2p-GO forceSCC, support is present where no matter
what is the GO negotiated channel in start_bss, driver will force
the other GO/STA/GC channel (on the same band) to the current GO
channel. This is force SCC strict mode where value 1 is used for
g_enable_go_force_scc ini. In this mode GC will have to do full
scan as the GO channel may be different from actual negotiated
channel. DUT may see some issues if GC dosent do full scan in
this mode.
As part of this change, add support for value 2(Liberal mode)
in g_enable_go_force_scc ini. As part of this liberal mode,
driver will allow the GO to start in MCC mode and after set key,
it will check any other concurrent GO and will do forceSCC for
that GO to the newly formed GO channel.
Change-Id: Ifc7beb06335616c51dc064f48a78b825dbdbda25
CRs-Fixed: 2992098
Check fw capability to support p2p + p2p concurrency from
soc_fw_ext_caps and based on fw capability, set policy
mgr concurrency for p2p + p2p.
Change-Id: Ia32f81f37174e9d722911b1fae6d4897d0af9816
CRs-Fixed: 2991300
From the caller, the args comes as pm_ctx but in definition
it's assigned as work_info which causes crash.
Change-Id: I9928a2c3862407b02cb34356ad54895e1d3069c7
CRs-Fixed: 3035090
If SAE/H2E required by hostapd configure, it must populate in
supported rate or extended support rate set, add host driver support
to check this flag and populate it in extended support rate set.
Change-Id: Id75b5743e93a1a0f1d13150d5436d256e2ca117c
CRs-Fixed: 3016492
bss_descriptor->length is calculated as:
bss_desc->length = ie_length + sizeof(*bss_desc) -
sizeof(bss_desc->len)
In wlan_get_ielen_from_bss_description(), the bss_desc length is
validated as below to return failure if ie_length is 0:
=> (bss_desc->length - sizeof(bss_desc->len)) <= ieFields_offset
Since the bss_desc->length already has the sizeof(bss_desc->len)
subtracted while it was populated.
So this could return failure, if the SSID IE length is less than
or equal to 4.
To avoid this, change the failure condition as below:
(bss_desc->length <= (ieFields_offset - sizeof(bss_desc->len))
Change-Id: Ib0af8e967c26ff0ca9a3b8c44107be4e80378e01
CRs-Fixed: 3022657
Currently driver don't have any feature flag for connection
roaming ini config and it directly tries to read the connection
roaming ini file, on some of the platforms if this ini file is
not present it returns failure message but some of the platforms
results in timeout which results in unexpected behavior.
To address above issue add a feature flag to read connection
roaming ini config.
Change-Id: Ica4159533e46ca5cc2048bf50eab2290bf5ae7d5
CRs-Fixed: 3035148
