Add function to parse pll_codes from dfps_data_region, and the
pll_codes are used as trim_codes for RFI.
Change-Id: I5b16be94a9e47dff515dea036839f74c2ddd8824
Signed-off-by: Bruce Hoo <bingchua@codeaurora.org>
Exit stream enable on cable disconnect considering that the
controller and display modules would have transitioned to aborted
state. It is possible that the disconnect might have prevented
the link clock from being enabled, so we have to skip any register
programming in the link clock domain. We remove the unprepare
call from the DRM wrapper error handling since that path can lead
to unclocked register access when the link clock is not enabled.
Change-Id: I92595c0824193df63c2746bc8cd644f59c33604a
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Deregister the altmode notifier in the client teardown path since
the client will no longer be available to handle altmode
registration.
Change-Id: I06c6c61d4eb0b0fc9e9c1df1da4a0c86e4556de1
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Panels supporting Cphy use a specific divider
blocks. Add additional divider blocks for byte
and pixel clock output to support DSI CPHY.
Change-Id: I74b3ee2bdd22ae8fa20567fe837e03915537c4fb
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Add support to read cphy boolean flag from panel dtsi
and configure DSI PHY registers accordingly. Update the
bit/byte clock calculation according to cphy specifications.
Update clock parents so that the relevant divider blocks
are configured to support cphy.
Change-Id: Iaca61eec01a488657b086f59910c52f8c79e26a4
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
In order to make dsi panel and dsi2hdmi panel compatible,
delete "qcom,panel-force-clock-lane-hs" property in phy and
use display panel's force_clk_lane_hs property.
Change-Id: I490e08b2ee859797c2b3aeddf109a3a4286fb922
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
In general the brightness value, the first parameter is low byte and
the second is high byte, but some DDIC invert, so add inverted display
brightness value property.
Change-Id: I8bf5631bb66096bd28529c53643e358afffce18e
Signed-off-by: Wenjun Zhang <wjzhan@codeaurora.org>
When histogram buffer is queued by driver client, during the display
commit buffer has to be submitted to hardware. Currently driver is
waiting for previous histogram to finish before submitting the new
buffer. This can cause the histogram to be invalid, change updates the
submission logic of buffer.
Change-Id: I76b595fa96d1c2dd01c841de3cf228d4fa7fd75d
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Enable compilation of DP MST feature. Also ported drm mst implementation to
use updated API definitions. Changes to the API include; removal of hotplug
callback; separate refcounting for topology and memory allocation in mst
port; pass the entire port instead of slot count in
atomic_release_vcpi_slots API.
Change-Id: I951c2978339229ea7e124c2addc114ea5d3cbb3d
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
This changes the method of esd detection at tx timeout
from TE to panel status read for panels having status
read as default method.
When ESD is triggered, even if spurious TE interrupt fires
after resetting the panel gpio, driver correctly follows
the recovery after esd failure.
Change-Id: Ib33537319f128c038f5774829dfd09bab9664fea
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
If vblank work is queued to event thread, during modeset,
there might be a case where vblank is enabled in between
resulting in vblank ref count mismatch. This change queues
vblank request to disp thread during modeset.
Change-Id: I98b87b4209e1f7f535980eef22a50df17c346c23
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
Resource reservation of an atomic state should be cleared
irrespective of the state of a display. This change relaxes
the encoder - connector chain up check as this may not be
available during a modeset disable outputs scenario.
Change-Id: I8a51973b7c77787ff19d894458a1b73580b93de2
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Add support for all 4LM topologies in new DCE encoder framework.
This change also aligns with the new way of checking topology
information.
Change-Id: I20785c96569fd07cbd8016d244a7e4c929bfa071
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Increase the maximum number of mixers per crtc to 4 to
support 4LM use case. This change also increases the number
of data path to 4 to support 4LM in continuous splash handoff.
Change-Id: I4655017dcb405fad69513bebb8fd7f848fc5873d
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Lower the cyclomatic complexity for this function by splitting
the work into helper functions.
Change-Id: Ib69f542701009f5b8f5d4f7462ba84a5ab116c1b
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Currently mixer calculation does not take the number of LMs into
consideration when it is greater than 2. This changes adjusts mixer
count for 4LM use cases based on maximum clock and pipe width.
Change-Id: I05631dee3beadaa0d50548282a539835bcb548c0
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Reserve LM in the sequence of primary-peer and then
primary-peer again until all required LM are reserved.
Searching sequence will not change for single/dual LM
reservation. For single LM reservation it will return
right after the first primary LM is found. For dual LM
reservation it will return after the first primary-peer
pair is found.
The logic can also work for triple/quad or any number
of LM reservetion and make sure that all the reserved
LMs are in pairs except the last one if total LM number
is odd.
Change-Id: Ia28bb64fedeb43430039775051943d751259a3d2
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Signed-off-by: satbir singh <satbsing@codeaurora.org>
Signed-off-by: Xiaowen Wu <wxiaowen@codeaurora.org>
Fix checks and lower the cyclomatic complexity for this function
by replacing non-trivial conditional logic with look-up tables.
Change-Id: I731d228d00c90d14faa02115f50c0ddfa4ac5c19
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
When a 4LM topology is used each plane attached to a CRTC
is tagged with a L/R layout value and an offset value
depending on where destination X coordinate lands on the display.
The layout information is used to determine SSPP to LM
pair mapping and local coordinate space.
This change also handles source-split and Z-order
validation checks for planes staged on different mixer
pairs.
Change-Id: I1b20223388e65fc36a8b379ad9df23a277fcd1a5
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Add 4LM topology variants in resource manager and in drm
connector topology name property.
Change-Id: I13e6eaafe60037b48d2c9d356f668b69720cbf48
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Display is entering into mode2 since no new frames are queued,
but auto-refresh requires HW to remain active. Make sure to
cancel the timer for entering idle power collapse whenever
there's a kickoff with auto-refresh feature enabled.
Change-Id: I0ac74e514c9893c31506edc3f2d7e069ab9a3ef8
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Change removes scaling for porches while calculating h_total, as
it is not necessary. Using scaling for porches results in lower
clocks which in turn can lead to low FPS.
Change-Id: Idbad83e1c56f079e60fe5ac342f8dd977db54f8f
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Remove unused register debug function. DSI is now using a different
function instead and no longer needs this.
Change-Id: Ia0da4ba8447a162b4f327c34b26177bbaea0a0f9
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
This change adds secure-ui blendstage support for
lahaina target.
Change-Id: If6e0f9df469e39f53329b264416ef9214ec01be9
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
This change updates resource topology mapping tables and includes
logic to compare compression types for dsc vs vdc.
Change-Id: I1735edeb07aec8ed0065f84ac0824c58158412f3
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
