MDSS INTF HW block does not generate vsync if controller
turns off the link clock prematurely. This leads to
frame trigger timeout and SDE driver triggers the retire
fence after 84ms to recover gracefully. A client may switch
source pipe from one CTL path to another CTL path based
on delayed retire fence. It can lead to other ctl path
hang. This can be resolved by resetting the lm blend
stages for each missing vsync frame trigger.
Change-Id: I5a6ed03afbdad83d8fd6decc593d39e04bef62e4
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Noise and attenuation layers are full screen layers. Top left coordinates
are not cleared in some use cases when same blend stage is assigned to
noise and attenuation layers. This change sets top left coordinates of noise
and attenuation layers.
Change-Id: I6af7a38d011d0bb642dc3d8a4aff338075524906
Signed-off-by: Anjaneya Prasad Musunuri <aprasad@codeaurora.org>
Power on reset value of DPTX_CONFIGURATION_CTRL.ASSR (alternate scrambler
seed reset) is high. Which will cause link training 2 to fail with TPS4 pattern.
Change disables this before link training starts.
Change-Id: Iee95de04625658254b242afdcbba6db24a52606d
Signed-off-by: Vara Reddy <varar@codeaurora.org>
DP driver is requesting USB to release SS lanes very early
during bootup even before USB has fully initialized. As a
result USB driver is returning -11 which will abort DP state
machine. This change will allow DP driver to retry USB request
whenever this error code is received.
Change-Id: I144d16ef4b07016569ba9c04df15610fe3b5e6fc
Signed-off-by: Sandeep Gangadharaiah <sandgang@codeaurora.org>
When disabling an encoder with multiple physical encoders, the
intf mux must be cleared on all interfaces. Currently only the master
physical encoder is being cleared, leading to possible DSI
underflow errors. This change ensures that the mux is cleared
on all interface blocks.
Change-Id: Idb1b96fd65545e3599100e70ace22bc3837d7233
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
In the event when msm_gem_delayed_import returns an error, reset
the obj_dirty property to true to allow the buffer to detach and
attach again.
Change-Id: Ib8da8f237c5a4ab696675cbcf66f1a3dfae02639
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
In sim mode, the dp driver is not checking for the aux state before
processing an aux request. This ends up causing the drm framework to
unnecessarily wait for 4 seconds while destroying a stream.
This change adds the check for aux state to align with the behavior
of a real sink.
Change-Id: I81900018ac1b403bb1e03fe26206e145694fefbd
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
In the current code for finding the qsync min fps for a
mode, entire mode list is iterated which involves acquiring
dsi display_lock. During conn tx debugfs commands, if
qsync min fps is required, we try to acquire dsi
display_lock twice which results in hang state. This change
adds qsync min fps value in dsi_display_mode_priv_info
struct in order to get the qsync fps from the
msm_display_mode present in connector state instead of
looping through all the modes to find the mode qsync fps.
Change-Id: Ifded40d1f12462bb50fc7bdafb746ae5b8d9512a
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
Change adds support to notify TZ ops TA for any HDCP 1.4
authentication state changes, so that TZ can optimize their
code for better performance.
Change-Id: I62f47e2e3fc102cb51cf695daa5f6b798f65781a
Signed-off-by: Vara Reddy <varar@codeaurora.org>
This change adds support for reading the byte at specific DPCD
addresses for physical monitors, similar to the way it is already done in
sim mode.
The read address is taken to be the last written address. Reads return a
single byte unless the address is 0, in which case 20 bytes are returned
to preserve the original functionality.
Change-Id: I43c44d81758c156257bd5dba6bb8f9c08ac948eb
Signed-off-by: Alex Danila <eadanila@codeaurora.org>
Current display driver can't support kernel dts property
qcom,mdss-dsi-bl-min-level to adjust backlight min level,
so adding this change to make it work well if user wants to
increase the backlight min level of display panel.
Change-Id: Iac74ee44aafac88548ceba6b221d13251dc3d5ef
Signed-off-by: Yahui Wang <yahuiw@codeaurora.org>
Dummy mixers for dedicated concurrent writeback can be allocated
as valid mixers. However, they should only be allocated for DCWB
usecases. Allocating these virtual resources incorrectly can lead
to underrun on external monitors. These dummy mixers should not
be tracked as available resources and exposed to dp for
mode validation.
Change-Id: I04f583d5b722e0a384a5446e3a8a2313a338aa12
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
In the current code, vmlock is always acquired in check
phase even if there is no transition between vm's. This
might result in janks if vmlock is held concurrently by
other processes such as backlight update. This change
ensures that vmlock is held only if there is a valid
transition request between vm's in check phase.
[cohens@codeauarora.org] Resolved trivial merge conflict
and refactored the code to reduce the code complexity.
Change-Id: I022f04c19ba04fdd5494580cc1436747620b9354
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
To ensure that set merge_mode after vlut and hist enable, move merge_mode
enable from ltm_init to ltm_vlut.
Redefine the OP_MASK of LTM_INIT_ENABLE and LTM_VLUT_ENABLE, in order to
write the merge_mode bits correctly.
Change-Id: I5258e7f545e265b114098e46d31986274127e962
Signed-off-by: Ping Li <pingli@codeaurora.org>
Signed-off-by: Yuchao Ma <yuchaom@codeaurora.org>
Current logic will unnecessarily call backlight update
twice in cases where backlight level is changing. When
this happens, there is a potential delay waiting for the
first command to complete before sending the second
backlight update with the same value. This change removes
one backlight call and now only calls update if the
property is marked as dirty.
Change-Id: I260f0d73b3a5af9ced7ae261d247595f965a8d9e
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
DSI parser utils are enabled through kernel config
CONFIG_DSI_PARSER. The stubs for disabled case do not
have appropriate storage class. This change alters the
stubs to be static inline which is appropriate storage
class.
Change-Id: I692b792cc3e8a8340245ee5f356e1f6281276a59
Signed-off-by: Shashank Babu Chinta Venkata <sbchin@codeaurora.org>
Verify if DP stream is still active before accessing dp audio
registers. This would prevent a scenario where audio teardown
flow is trying to access dp audio config registers after dp
has completed the deinit process.
Change-Id: Icbcaa19529fc2fb34e079231c9ef24e15aa7e4f2
Signed-off-by: Sandeep Gangadharaiah <sandgang@codeaurora.org>
With this change, the IB vote will be based on the following:
IB = AB_aggregated / number of DDR Channels / DRAM efficiency factor
Number of DDR Channels and DRAM efficiency factor are now device tree
properties which can be modified and parsed at boot up.
Change-Id: I298043807150faec1cbc0d74eefcdd1a534b460a
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Handle host_ready failures and try to initialize host if not already.
Sometimes customizations for customers causes NOC error as host_ready
doesn't return early upon failure and the customer customization
tries to access aux register to reconfig upon aux failure while
reading EDID. Adding fix will make driver more robust to handle such
cases.
Change-Id: Ifa5c56daa32c4ef366a0e05718495ffcb40b96b3
Signed-off-by: Rajat Gupta <rajatgu@codeaurora.org>
Signed-off-by: Sandeep Gangadharaiah <sandgang@codeaurora.org>
The controller flags need to be reset for each command. On resetting
it only for a batch of commands, it may carry stale values and cause
unexpected behavior.
Change-Id: I8473be0c4361965a58c33a3d45420c533d48646b
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
In concurrent display usecases, dma_fence_array signaled op
can be called early which sets SIGNALED_BIT on spec fence, but
irq_dma_fence_array_work is not scheduled yet which clears the
PENDING_ERROR in dma_fence. Add changes to treat pending_error
with signaled cases as non fatal.
Change-Id: I3a59032345b8c6d1488e947e74985ed929112d1c
Signed-off-by: Jayaprakash Madisetty <jmadiset@codeaurora.org>
This change avoids unnecessary calls to dma_buf_end_cpu_access and
dma_buf_begin_cpu_access for context banks which have dma-coherent
attribute set.
Change-Id: I5120e55bed372d166d05da988714551428964b8b
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
