Add disabled links table and APIs to move and remove
vdevs from disabled links table.
Change-Id: I610bbd10e387a4bcd3a5d5c88c3dba5698878441
CRs-Fixed: 3181474
Add PCL handling for ML STA + P2P + P2P concurrencies,
based on current hw mode (SBS/DBS/SMM).
Change-Id: I337b12a0c03ab89968572056f27f47a6b9392803
CRs-Fixed: 3177305
In new framework the 6 GHz preferred SAP ACS config file will
contain 5 GHz channels, to avoid 6 GHz non-PSC being set to
MAX weight value and 5 GHz channels selected easily, here set
normalize_acs_weight to 90 for non-PSC channel of 6 GHz, 40
for 2 GHz and 5 GHz channels.
Change-Id: I5e89339d0fd4e3c190dd2ead1ec87d12ff197691
CRs-Fixed: 3186587
If normalize_acs_weight INI setting covers the DFS channel,
the existing DFS channel weight factor will be override.
Fix it by using the minimal weight factor for both setting.
Change-Id: Ie0fa3371bd99ee8d50c7abc81ddc8cd0eb84f9aa
CRs-Fixed: 3196688
To make the active connections number configurable, based on
host configuration of INI gMaxConcurrentActiveSessions
host sets the num_max_active_vdevs in WMI init command to notify
the FW the number of active connections host expects to support.
FW will report the actual supported number in wmi ready event.
Policy mgr will record the FW supported number if FW number is
smaller than host requested.
Change-Id: I454c0cdde6be1e8a627f8fff08b6c7b2141b00f6
CRs-Fixed: 3183006
If force SCC enabled, user trigger SAP CSA and target channel
doesn't cause MCC with existing STA/CLI. Then overide strict flag to
true, so that driver can skip the overlap interference check and
allow the CSA go through. This is to allow SAP/GO force SCC in
same band.
Change-Id: I7844f7329b922456594cad1402a0d2ac0d0927c5
CRs-Fixed: 3178725
Add support for new ini param RoamCommon_MinRoamDelta. This param
is similar to the existing min_roam_score_delta param but units
change
Change-Id: If04ff2344a2651e7d8d71c92f05dfebc229f9fe1
CRs-Fixed: 3015930
Add support for new ini param RoamIdle_InactiveTime. This param
is similar to the existing idle_roam_inactive_time but unit
change
Change-Id: I857107a6d0e39f373e39d4fb9b762e7cf4c4a9e4
CRs-Fixed: 3015993
hdd_wds_replace_peer_mac will modify the input mac addr, the destination
mac addr of skb is modified once we pass skb->data as a pointer to the
hdd_wds_replace_peer_mac.
Use a local variable to get mac addr in skb, then hdd_wds_replace_peer_mac
will not modify mac addr in skb.
Change-Id: Ie0f6f4365b8558a451fa8434832f14aebd56172b
CRs-Fixed: 3196225
Keep SCC channels in the PCL list, if SCC is allowed on those
frequencies.Do not remove these frequencies, if the
mandatory channel list doesn't have the SCC frequencies.
Also, whenever the user configured frequency of the SAP is
different following a STA disconnect, switch it back to the
home channel.
Change-Id: Ia5fe8943136791084de02a2d3a8ff250008978be
CRs-Fixed: 3196278
When getting chan param for SAP, the bandwidth is downgraded if some
channel in the bandwidth is disabled if puncture flag is not set in
chan param.
Check phymode in sap_ctx, if it is 11be, enable puncture when getting
chan param.
Change-Id: Id80a76c3fc8bb96e714b1b70159637ece876488f
CRs-Fixed: 3201043
During full scan only 2.4Ghz channels are printed.
Along with 2.4Ghz channels print 5Ghz channels.
so, use policy_mgr_get_connected_roaming_vdev_band_mask()
instead of policy_mgr_get_connected_vdev_band_mask()
After Roam result candidate or currently connected
AP bssid is not printed. so, printed candidate or
currently connected AP bssid by changing logic
Change-Id: I800ebdc033480b93150bdeb00a900c373ba333dc
CRs-Fixed: 3185092
Kernel change d4455fa 'proc: mandate ->proc_lseek in "struct proc_ops"'
by default use proc_lseek for file operations without any check, so add
default_llseek for all proc ops.
Change-Id: Ia72839cf09ec721fb98f50793b19ec082478d8d7
CRs-Fixed: 3201012
In err case "add_sta ptr" is freed in wma_send_msg_high_priority
and referenced again in caller API
so fix this by removing references to "add_sta ptr" in the caller
API's after its freed
CRs-Fixed: 3197782
Change-Id: Id1424b2802108f7d7475ed5dbf28e938bb47b525
For every random mac addr set/clear command to firmware,
driver gets reply from firmware whether success or fail.
But sometimes, if the response event is delayed by more
than 100ms by firmware then timeout happens in HDD.
Upon timeout, driver sends clear random mac command which
gets dropped in p2p_process_set_rand_mac API as prev command
status from firmware is pending.
So fix is to increase the timeout value to 1000ms
Change-Id: I6116259b5d34269a8c98712d978957cfd374cdc1
CRs-Fixed: 3199989
i.) Keep rf test mode ini disabled by default due to which
6G security check will be true.
ii.) while calculating TPC power, check safe mode & RF test
mode enabled or not and set power mode to LPI if
safe mode or Rf test mode is enabled.
iii.) During HE ops IE extarct set power type to VLP, if
6 G Hz info is not present in HE ops IE. So that power
type can be VLP in case ap_ctry is non US.
To get safe mode value, a new member is_safe_mode_enabled
is added in mlme private object and is set whenever
WIFI_TEST_CONFIG_6GHZ_SECURITY_TEST_MODE command is triggered
via userspace.
Change-Id: I4fc2a231f8e7d18e68b92af3f381456113668779
CRs-Fixed: 3192967
While one thread delete peer from vdev peer list, set entry's next as
itself, another thread accesses the deleting entry of the peer list,
and access it's next, deadloop and use after free will happen.
To fix it, add vdev lock when access vdev peer list, same as delete peer
from vdev peer list.
wlan_obj_vdev_peerlist_remove_peer
qdf_list_remove_node
->list_del_init
->INIT_LIST_HEAD
->WRITE_ONCE(list->next, list);
Change-Id: Icc288035837869e73c247837a24785f70822d671
CRs-Fixed: 3200030
As part of MLO stats feature, increase the LL_STATS buffer size
from 3 pages to 6 pages.
Change-Id: Iecfa663fcf1c6b8c98c7f0582258e3954cebe0a6
CRs-Fixed: 3201372
Issue : Host fails to register the event call back handler
again in case Wi-Fi is turned on and triggered a reboot.
Because even after reboot, at a point of time when the host
is registering event callback handler, the host does not
receive FW capability flags yet in mlme context and this
results in FW caps check failure every time while call back
registration.
The fix is to allow the host to register to call back handler
irrespective of FW flags and add capability check in callback
handler.
Change-Id: I1dd66279097db6a68885b0416076428b73eefb9c
CRs-Fixed: 3196030
Currently, when the ACS frequency list contains only
6GHz frequency and mandatory channel list doesn't
contain any 6GHz frequencies, then the 6GHz frequencies
are filtered out from PCL.
Therefore, driver falls back to the master ACS frequency
list to choose the SAP operating frequency. Add a check
to not choose non-PSC channels, if the frequency is
6GHz.
Change-Id: I7539a99987df200d50a812409cc5df7c3dfb05a7
CRs-Fixed: 3198675
Currently we are reading early stop scan min and max
threshold to unsigned int, because of which we are
sending wrong values to FW.
Read early stop scan threshold min and max values
to signed int to send correct values to FW.
Change-Id: I2e96b3c3e9fb48352d8075a4e7a96eae41dacedc
CRs-Fixed: 3191076
Add a guard check to update ll stats request bitmap in case
of MLO connection only.
Change-Id: Ie910e9afe6280d607c0a81b722a790c325e227dd
CRs-Fixed: 3200229
Currently STA can scan and come up on 6Ghz or 5Ghz indoor channel
if hardware is non-dbs and SAP is present
As part of this change, do not allow STA to connect on 6Ghz and
5Ghz indoor channel for non-dbs hardware if SAP is present
Change-Id: I48ed8483225e35d8b898b0325eee398f74e41c97
CRs-Fixed: 3196247
Channel width from WMI_VDEV_PARAM_CHWIDTH get command is always 0.
Fix is to get correct channel width from vdev mlme structure and
convert it to SON channel width.
Change-Id: I9eba5a3d0a8490919ac1c0f66eb6fcf26b2db0a8
CRs-Fixed: 3181185
Enable SAP and GO D3 WoW feature by default since these features
are controlled by FW WMI service capability as well and hence for
older FW which does not support SAP/Go D3 WoW there is no impact.
Change-Id: I13597c2ee790270b295101252c4548d7c1c93f29
CRs-Fixed: 3199070
For session_id is not have sanity check, an OOB would happen
leads to crash.
Added Sanity checks for session_id in roam functions and
return failure if session_id is equals to NULL or MAX value.
Change-Id: I033c6567f53ead2a721882e9b44f3d0bcb58084d
CRs-Fixed: 3149880
