When nbuf allocation failure happens, there is no retry scheme.
So RX buffers in refill ring may shrink and not got enlarged.
This change is aimed to replenish more RX buffers when watermark
is less than critical low threshold.
Change-Id: I201b9e252ba08ba1bff47e0b5ec819a45f1b1ddf
CRs-Fixed: 3245915
Add HW, SW and nbuf prefetch support in Berryllium, this will
ensure we have prefetched the HW desc, SW desc and nbuf by
the time we are in the 3rd iteration of the dp_rx_be_process
first loop.
CRs-Fixed: 3218647
Change-Id: I27d371c5d1c9a37d61e4fc00d5eb03609fad589c
Features that rely on monitor status rings do not work when
num_rxdma_status_rings_per_pdev is assign to 1. This change
will fix this issue by removing this assignment statement.
Change-Id: Ic7b8b84be6fa9c34c15a86cb6ec5174cc512ddd9
CRs-Fixed: 3258392
Currently, Active command id is reset during memory release,
but a new command will become active before memory release
of serialization command, and if it try to check the active
cm_id (using cm_get_active_req_type) it will be valid, which
is incorrect.
Fix is, reset the cm id for active command before calling
release active command.
Change-Id: I6f4844c61349a00af5967f9c757844473244d737
CRs-Fixed: 3263863
In QCN9224 fetch the peer meta data from the msdu end tlv
instead of MPDU start
Change-Id: Icd9420cd83e06abe5e54e9e05cc8cbf8d8312ae1
CRs-Fixed: 3245626
Currently if both filters are added to get usable channels
i.e FILTER_CELLULAR_COEX and FILTER_WLAN_CONCURRENCY (3) then
all channels for required band are added first and then response
is updated based on cellular coex filter and invalid and avoided
channel frequencies are removed based on provided mode but for
FILTER_WLAN_CONCURRENCY pcl list is added, if frequency is not
present in response channel list and count is incremented. As
invalid frequencies are already removed from response before concurrency
check , so some pcl frequencies will not be present in the list and
count may be updated more than valid count.
Fix is to add frequencies based on concurrency filter first and then
remove invalid frequencies based on celluar coex filter to avoid
any invalid increment of channel list count.
Change-Id: I72b13c9c1f1bdfe3616d44fe893ce306634b022e
CRs-Fixed: 3262059
Update wait count as per the following formula.
new wait count = min(old wait count - packet counter delta, 0)
CRs-Fixed: 3261649
Change-Id: Ie5b2055e41518a87543b52c18c366f42291b8093
Added fix,
a. To populate response timestamp from phy timestamp.
b. Based on window type swap address1 and address2 to match the sniffer.
c. For VHT frames, increment 1 to the received nss value.
Change-Id: I68dffadb609d82e2ad2cf433fcee2a76b0be98e7
CRs-Fixed: 3235718
If radar is injected on the non-dfs segment of a DFS channel
(e.g. Operating channel is 36 HT160, center freq is 5250, freq_offset is
-20, radarfound_freq = center freq + freq = 5230 (IEEE 46) which is a
non-dfs segment) using bangradar command, radar detect event on
non-dfs channel is sent to user space.
To ensure that radar found event is indicated only for DFS channel,
send radarfound event only if the final status of the API
dfs_process_radar_ind_on_home_chan() is a success. If the API returns a
failure (eg: radar on non-dfs segment), do not send radar detect event
to user space.
CRs-Fixed: 3254309
Change-Id: Iefc277348569e1494401f0ec215bb786e4153268
After received rx packets, host should keeps in active state for some time
(500 ms by default) until next runtime suspend is triggered, If found rx
link speed change from good to poor or from poor to good, can send
to firmwware by WMI instead of QMI, QMI may block current thread for N msec
for sync mode is used.
Change-Id: I94b45ce6125a24466fbcf57e22f1a56cbdeefe9a
CRs-Fixed: 3262032
Smart Antenna retrieve Rx EVM info support for RX feedback collection.
Support is for Wikiki.
Change-Id: I0daa657efe1054dbcc58f9318e97be02701723e6
CRs-Fixed: 3255729
skb queue is not always mapped to the proper CPU
hence it is good to map the ring_id to CPU through get_cpu
API.
Change-Id: I3bf76452cc1fcb2033ef1a8640c4dd31ecba61b3
CRs-Fixed: 3255144
Throughput based RTPM logic of ring access may fail and
lead to NOC error in some corner cases. Change is aimed
to add additional link states check to prevent invalid SRNG
access.
Change-Id: I7e7edbadfd21b4857efa4faff0ada6d94d682f2c
CRs-Fixed: 3256702
Currently the FTM rx frames are dropped in
tgt_mgmt_txrx_rx_frame_handler considering them as unspecified
packets as action category for FTM is not defined.
Define FTM action category so that the FTM frames will not be
considered as unspecified frames and dropped while processing.
Change-Id: Ieb3980978e38b3f826f42380e29798767c8f1fe2
CRs-Fixed: 3254409
Add provision to call sync prevent suspend which will wait for
system to resume and increment usage_count before returning.
Change-Id: I855e3fc2660dc7f3f78bb70f8eef6228cbef96d3
CRs-Fixed: 3253335
This function fails to register in the 6750 platform.
Since some old chips do not have l3 type field, the
callback function cannot be registered, so this change
solves it by recognizing whether the callback is NULL.
If it is NULL, then return an invalid vallue: 0xFFFF.
Change-Id: I47c8df5e54eeac9489010e45057e44eccdb2bf22
CRs-Fixed: 3258200
Currently when firmware crashes during driver load,
message queue handlers for scheduler context are not
registered. While handling the FW down event, driver
posts the message to scheduler queue. Since the queue
handler is not registered, it results in crash.
To address this issue, handle the msg gracefully and
return error in case callback is not registered.
CRs-Fixed: 3251983
Change-Id: I5dd55e701cf332153dca1f6678271506b9690f6e
Add API to check ICMPV4 and ICMPV6 are redirect or not
This is to avoid a security breach.
Change-Id: I61e7c54c6d9279c1e7d2f316381fbc1c83ce5b4a
CRs-Fixed: 3233925
When TX completion entires are pending over 60 seconds,
Perform force free for these entries that belong to invalid
vdev. This could allow system to continue to go to suspend.
Change-Id: I34a39b8c7a9385fea0bed087e0644564f426bf90
CRs-Fixed: 3252807
Added fix for two leak,
a) During wifi unload, buffer used in init need to be free during deinit.
b) Before buffer free, unmap is required for the buffer mapped to DMA.
Change-Id: I4e5a63b0c2aabb69367365e74961a63194144057
CRs-Fixed: 3157424
Currently, RSNXE capability indexes are defined incorrect.
It seems BIT index is misinterpreted. Correct the same as defined
below in spec(IEEE Std 802.11-2020, 9.4.2.241, Table 9-780).
The Extended RSN Capabilities field, except its first 4 bits, is a
bit field indicating the extended RSN capabilities being advertised
by the STA transmitting the element. The length of the Extended
RSN Capabilities field is a variable n, in octets, as indicated by
the first 4 bits in the field.
Also, add a macro to check if the given akm
is WPA/WPA2 i.e. legacy than WPA3.
Change-Id: I3d8eee15f6734b2364628f699b7829a1edb246f0
CRs-Fixed: 3257715
This is used in streamfs buffer size.
This is done in consideration with using upto
504 tones in place of 512 tones for CFR.
Change-Id: I7e45697e47f4b818b472b1bd8e91d785e676c506
CRs-Fixed: 3260185
Change the Max number of session id support by IPA
to 7 as EasyMesh requires 7 vap per radio.
CRs-Fixed: 3259857
Change-Id: I24a98e10e46d3720b6e210d023c750d056786bbf
use msdu_count and index to occupy buffer headroom within mpdu.
new mechanism to debug buffer while using pf tags enabled
Change-Id: I1b7d8a1d7ec93f51869119294d2f0b14e3909fe9
CRs-Fixed: 3217284
Call UMAC reset initialization API from soc_attach_target().
FW exposes a service bit for this feature, use that to conditionally
enable this feature. Also, add default log levels for this feature.
CRs-Fixed: 3253464
Change-Id: Ia7c9cf07a7ab7b000ebe452ab074a82173b70129
DP uses multi page allocation for tx/rx descriptor.
ID and offset mask of decriptor is based on 4096 which
couples with Kernel's MMU PAGE_SIZE. This cause trouble
when deploy driver on none-4K page size kernel.
Set qdf_dp_blockmem_size to 4096 so that DP won't
depend on kernel page size.
Change-Id: I17f5c10b394e8709e6b4b153f3dd094cf792787f
CRs-Fixed: 3235246
WMI_SPECTRAL_CAPABILITIES_EVENTID registration returns QDF_STATUS_E_FAILURE
on failure which is not required as it is causing crash on failure where
event registration is failing i.e., Hawkeye + Swift
Change-Id: Id11d76941b12d0ee249d8f6e86612b351b732d78
CRs-Fixed: 3255827
If found rx link speed change from good to poor, or poor to good, need send
to F/W. It may happen frequently. To avoid power side effect, send to F/W
by QMI instead of WMI.
Change-Id: I2e7ddd3ae539257c6b195cb13da221f886debbba
CRs-Fixed: 3255042
dp_mon_free_parent_nbuf() function is required to be
used outside of file dp_rx_mon_2.0.c hence make it
public.
Change-Id: I2c300362fee3610fce0109704ea1849333bf9715
CRs-Fixed: 3250904
