When TDLS disabled at the build level, it triggers
build failures in some of the projects, which does
not support TDLS feature.
Restructure the TDLS function to avoid build
failures, when TDLS is not enabled.
Change-Id: I3b63546f22d0187fb42d400fd7e15ff7a3d64653
CRs-Fixed: 2056022
Vendor features are used to indicate OCE support
from driver to user space which are set based on ini
params for STA and SAP.
Change-Id: I7ef572443c8a7ed313917e4dfab5f4fab73fe245
CRs-Fixed: 2031980
There were some corner cases reported in which NDIs are getting
created with same name. Providing fix for the same.
Change-Id: I84ea80580faa44809e257d3b17645808637b5d51
CRs-Fixed: 2072509
Enable support for multiple nan data interfaces. The usespace
may need to create multiple NDIs depending on whether it
requires IP isolation or not.
Change-Id: I4391f2efdc6bdede52a73915531d39dd7798c39d
CRs-Fixed: 2072501
qcacld-2.0 to qcacld-3.0 propagation
Add QCA_WLAN_VENDOR_ATTR_GET_STATION_REMOTE sub command for peer
station of SoftAP information stats feature, and add related
attributions of this command.
Change-Id: I516d459be2e6556a7e33d285c3ffeacc1ab0f9a5
CRs-Fixed: 2075888
The ndp channel config has no meaning if ndp channel itself
is optional. Host will send ndp channel config as "optional"
to FW if it is missing in the ndp command.
Change-Id: I59e245f3fb05ae35aa185fba7bad09608f5334c8
CRs-Fixed: 2072502
Driver truncated the transaction id to 8-bits from 16-bit
value causing the descrepancy in transaction id exchange
during NDI create.
Change-Id: I502f422620411c39bd0e75f06e9b7200bfea24ae
CRs-Fixed: 2072511
Service layer was not allowed to delete NDI if there are active
NDP sessions (peers). Service layer is expected to delete the
active NDP sessions before issuing NDI delete. However, that
is not guaranteed to happen. Hence allowing internal cleanup
to happen by allowing the command to firmware.
Change-Id: Iab9bc3bca431475792c164d16cdd18be2f346188
CRs-Fixed: 2072505
Add Passphrase and Service Name to NDP initiator request and NDP
responder request.
Change-Id: I6a189747760a15393fcbac9dc382847fef789ab1
CRs-Fixed: 2072498
Add host support for detecting SOC power collapse failures in FW and
communicating the same to framework.
Change-Id: Icee39c896802c4d7136e0b8ef442a33feeb4799c
CRs-Fixed: 2016580
Remove vdev/peer locks from trivial API's. This follows the changes from
which the lock requirement from few simple APIs are removed.
Change-Id: I9972d51dfd1a42bdedbfd0fd4e67af03d030a1f5
CRs-Fixed: 2060880
Remove psoc/pdev locks from trivial API's. This follows the changes from
which the lock requirement from few simple APIs are removed.
Change-Id: Ib5769c2234c8d57f485c0eef5a4e3c61fa170508
CRs-Fixed: 2060880
Currently the QCA_WLAN_VENDOR_ATTR_NDP_IFACE_STR nla_policy specifies
a type of NLA_STRING, but the underlying implementation expects a
NUL-terminated string. Update the policy to correctly use a type of
NLA_NUL_STRING with the len updated to remove the allocation needed
for the terminating NUL.
Change-Id: Ic73241511ab73ae63fd7c1a8d6422da91931919c
CRs-Fixed: 2063588
In wlan_vendor_abort_scan(), nla_parse() is invoked without specifying
a policy. This can result in a buffer overread when processing the
QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE attribute. To avoid this issue
introduce a "scan_policy" (replicated from qcacld-3.0) and use this
policy when invoking nla_parse().
Change-Id: Ia3e5cb7535bf0f700399e4a49c9c5da362a3ccf6
CRs-Fixed: 2059857
Filter channels passed to firmware for scheduled/offloaded scans,
when Do_Not_Break_Stream is set.
Change-Id: I36d434b9f7c25ff7de5ccb4d20a2ae41b2712662
CRs-Fixed: 2064380
Add API to deint scan runtime suspend lock, which can be called
before HIF is closed, to avoid crash while acessing HIF pointer.
Change-Id: Ida9269cdaea33a387e2acd1e3d9670d152b6016f
CRs-Fixed: 2065228
Add changes to correct vendor attribute to support external
ACS as defined in qca-vendor-copy.h
Change-Id: I68d04694004e9b44efed7b816b180648c0b59623
CRs-Fixed: 2049159
Scan event is updated to NL on a closed
wireless dev.
Add validation check at scan event callback
before updating the scan events to NL.
Change-Id: I979b53ecb481007f663feb927b6e3e96cf73616b
CRs-Fixed: 2057127
scan request queue is accessed in multiple
process contexts so added mutex to scan request
queue. Scan request mutex needs to be acquired
before accessing the scan request queue.
Change-Id: I3f0fe0513d5846f4eaf313848f00f86d29a66e35
CRs-Fixed: 2057127
For Network Listen Offload and Perfered Network Offload, the fast scan
period is multiplied by scan_backoff_multiplier after max cycles have
occurred. Expose scan_backoff_multiplier to consumers of the WMI API,
so this parameter can be configured.
Change-Id: I478fb61cd096d3496205f4ff556e180dabf99b77
CRs-Fixed: 2035201
Out of the list of scan channels passed by the application,
if the driver skips some channels, then the frequency list sent to
firmware was not correctly filled.
For example if supplicant passes channels 1, 6, 11 and we want to skip
1 and 6, then "req->scan_req.chan_list[0] = 0,
req->scan_req.chan_list[1] = 0 and req->scan_req.chan_list[2] = 11".
It should have been "req->scan_req.chan_list[0] = 11"
Fixes the same.
Change-Id: Idcef090169b8848c2576e620aa0fbe93918c219c
CRs-fixed: 2053866
This commit defines an attribute to
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION -
QCA_WLAN_VENDOR_ATTR_CONFIG_RESTRICT_OFFCHANNEL which can be used to
restrict offchannel operations on the AP/GO interface.
The goal is to restrict any operations which would cause the AP/GO to
leave its operating channel.
Change-Id: I88c2edb9456105068d0907b47dcd78cc09dc2428
CRs-Fixed: 2050999
Since AVOID_FREQUENCIES vendor subcmd might be needed even when
FEATURE_WLAN_CH_AVOID is disabled, always enable
QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_INDEX in the vendor
subcmd list.
Change-Id: I4ac774d16540306fdb1301f9f182eeea8571388b
CRs-Fixed: 2045120
Scan results are flushed as part of sched scan start
which could result in subsequent connect to fail as
bss is removed from scan list.
Fix is to not flush scan results as part of sched
scan start.
Change-Id: I0cbc0fb707db0be4890b840b72c8126a7c5ff54b
CRs-Fixed: 2045834
Add runtime suspend logic for scan, to block runtime suspend when
scan is started and unblock when scan is completed.
Change-Id: I61c9afaf996d1ac97bfb5ffb0cd8a3abc971051e
CRs-Fixed: 2035675
Add cancel scan sync api which will wait for scan to be aborted on
pdev or vdev.
Change-Id: Ie02eb981154856cda38ef70f42fdfcf82bb88961
CRs-Fixed: 2038092
Few vendor commands are missing in qca_vendor.h, compared
to qca-vendor.h file present in hostapd.
Add the missing vendor commands and attributes in
driver qca_vendor.h file.
CRs-Fixed: 2034479
Change-Id: Ib95e6cbbf163b904a22fb4eb65d96e9ff8dddf49
Policy manager API usage in common scan module should be enclosed in
macro WLAN_POLICY_MGR_ENABLE, so that it can be optionally used along
with policy manager.
Change-Id: I76602657b4945a973f30d6b129a6b3896b9fdf9e
CRs-Fixed: 2042734
Remain on Channel request is rejected:
1) If an AP/GO interface is already active
AND
2) Do_Not_Switch_Channel is set for the AP/GO interface
AND
3) The requested channel is on the same band but different
from the AP/GO channel.
We allow one time procedures like GO Negotiation/Provision
Discovery/Invitation if the offchannel time is <= 150msecs
Change-Id: If19e9a06916891c5d3dbe6823fca72d70ead460d
CRs-Fixed: 2037302
1) Adds new policy mgr API 'policy_mgr_is_chan_ok_for_dnbs' to check
if a channel is OK for "Do Not Break Stream".
It means that if Do_Not_Switch_Channel is set for AP/GO vdev,
the channel passed should be either the AP/GO channel or a channel
from the other band.
2) Adds a new function policy_mgr_get_mode_specific_conn_info() to get
the mode specific connection count.
Change-Id: I4da6f7d56d01b01761a5f3557b8acbb84226a6fd
CRs-Fixed: 2037302
cfg80211_sched_scan_request start delay is added from
KERNEL_VERSION 4.4, and schedule scan plans is backported but
not the start delay.
This change is to make sure start delay accessed from request
only for KERNEL_VERSION 4.4 to avoid compilation issues with
CFG80211_MULTI_SCAN_PLAN_BACKPORT.
Change-Id: I3469ef457bb1f97fdddfb7491fbcaa2e64a16e8a
CRs-Fixed: 2038458
Vendor command QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT(127) and
vendor attributes for ps change and TX failure indication are
introduced by this change.
Change-Id: Iaa1c14e5cdc5a7d04beebbff1149daf871f9ef5a
CRs-fixed: 1048388
qcacld-2.0 to qcacld-3.0 propagation
A new 32-bit NL80211 vendor attribute is added to configure propagation
absolute delay for 2G/5G band (unit in us).
Change-Id: I2aecaa8b007c67fa2843ad3922857f923f9b8294
CRs-Fixed: 2034282
qcacld-2.0 to qcacld-3.0 propagation
Add 4 counts to link layer stats which will be retrieved along with
other link layer stats fields by application to decide if channel
hopping needed.
Change-Id: Ic413b8ad98f1147715cf89c083aa9a77e60a2dc6
CRs-Fixed: 1094958
In function os_if_wifi_pos_send_peer_status free buffer used to send
peer status indication to userspace after use.
Change-Id: Id90ea35aef4584d0ee7ef856d5cd12104eb089a4
CRs-Fixed: 2030121
PNO can be initiated from IOCTL with different calback and
thus register the callback while sending the PNO req.
Change-Id: I74109fc88cfbd082ce2ba5ca0a2396ab08b82b42
CRs-Fixed: 2032434
It doesn't process scan dequeue and start failed event, which cause
STA scan doesn't complete and blocking next scan work in
wpa_supplicant. For scan dequeue and start failed event with match
reason, indicate scan aborted to up layer.
Change-Id: I8861e277143116878f6714e50b600d77df69eeb1
CRs-Fixed: 2029955
