Read extra bits of fcs okay bit map from
RX_PPDU_END_USER_STATS_EXT TLV and use the same
to send first fcs okay packet in case of M COPY
CRs-Fixed: 2499150
Change-Id: I1a25971ea789dd7fddddb312af8a18a4cccdc178
Tags are programmed using wlanconfig commands. Rx IPv4/v6
TCP/UDP packets matching a 5-tuple are tagged using HawkeyeV2 hardware.
Tags are populated in the skb->cb in the REO/exception/monitor data
path and sent to upper stack
CRs-Fixed: 2502311
Change-Id: I7c999e75fab43b6ecb6f9d9fd4b0351f0b9cfda8
Add code to replace usage of void pointers from
HAL layer and instead use appropriate opaque pointers
Change-Id: Id950bd9130a99014305738937aed736cf0144aca
CRs-Fixed: 2487250
Make change to remove usage of void pointers for
ring descriptors and instead use a opaque pointer
dp_ring_desc_t.
Change-Id: Ia1e9a3da9eaa3cccf297b2135b52a72f2fe21431
CRs-Fixed: 2484409
Add code to remove void pointer usage for hal_soc
and introduce opaque pointer to be used intead of void
from dp layer into hal layer
Change-Id: Ia38571174c6ed79558d0f0c9cd1a0f4afaa66483
CRs-Fixed: 2480857
Filter fcs_err frames and pass only first fcs ok msdu payload
from ppdu to upper layer
Change-Id: Ibf739193275f4f5a5c3e786abbbaa45165b5aa13
CRs-Fixed: 2439392
A random crash may be caused by out of range access. Add MU
user id check to prevent out of range access.
Change-Id: I531d6c03024c4a6af4e0db97ea00d0874aaef387
Populate LTF size value from TLV for HE and modify
HE_LTF enum value to match with Firmware values
Change-Id: I8e5cce31cbae4aa8722050b06d89c933b74aa752
Do not process RX packet header TLV for low memory config profile.
Also, drop decapped frames in invalid peer processing function.
Change-Id: Ifc7721bb25d85c7e277bebf4b962d2f1bfea150c
CRs-Fixed: 2395508
In PPDU Rx stats GI value for HE displaying wrong,
because of wrong enum values. Corrected enum values
to match GI values to Tx stats.
Also LDPC shows always 0 in PPDU Rx stats for HE.
Populated LDPC value for HE case as well to display
in PPDU Rx stats.
Change-Id: I6054d3e8c8e8672bcc2d43daa8a6e2a1bc859985
This change will resolve displaying NSS value
in stats in case of HT. And also it will give
proper NSS value to calculate rate value. Modify MCS
value to match with Tx stats from firmware.
Also retain original MCS value to use in radiotap code
for HT case.
Change-Id: I4dad068262a5e9188a5935db6b2cbf8d14138e7e
For HE case, SGI enum values are different in FW and Host
So that firmware stats and host stats shows different values
To resolve this, change SGI enum value in host to match
firmware definitions.
Change-Id: I1b38dbe32a6c1ab2610c1c3a736a6898ddc73e30
Some of the macro names defined in qca8074v1, are defined with
a slightly different name in qca8074v2, and few macros have the
same name in both headers but are defined with different values.
Fixed the same.
Change-Id: I5e948baf5326d1d8fdfa2bd7ee8aa072c710d17c
NDP is a preamble only PPDU, which do not have payload information
from RXDMA destination ring. The detailed TLV sequence is:
* RSSI legcy
* LSIG_A
* HE_SIGA_SU
* RSSI_HT
* GENERATED_CBF_DETAILS
* PKT_END
CRs-Fixed: 2296348
Change-Id: I19f253c65969b59947bd9a21cf3912b16eb21324
When a ppdu id on a ppdu in status ring find a matching ppdu id
in destination ring. The old logic can cause ppdu id is destination
ring stuck on high value before wrap around. The new logic check
ppdu id between status ring and destination ring is no more than
20000.
Change-Id: Ia601403b0a4fc6cdfff980c7745e055c814137b7
Add the following fields in Radiotap header:
Antenna noise (in dBM)
Vendor Namespace containing the following information
->L_SIG_A
->Device_ID
->L_SIG_B
->PPDU_START_TIMESTAMP
CRs-Fixed: 2285143
Change-Id: I977be73778ab27383f12214c73b56c9b80d9f02d
Clean up datapath component prints by correcting trace levels for
regularly occurring prints and removing newlines from converged
print APIs since qdf_trace_msh appends them by default.
Change-Id: Ie8fe319fcb737720f7400a165e134b6a18bd15b5
CRs-Fixed: 2243843
There are some particular PPDUs which have preamble only:
* NDP frames
* TB_PPDU frames
Add support to the above frames.
Change-Id: I7022433d3765575eaf28d7baf3a11e8b6ce13890
CRs-Fixed: 2275161
Populate the RSSI value for the non associated clients
added in pdev->neighbour_peers_list from monitor status
ring
Change-Id: I509d06bec6eafe8377681c8a3da9a64f301c3c73
CRs-fixed: 2286571
Create separate individual hal_srng_table and hal register
offset in target specific source files. Create separate
functions for qca6290 and qca8074 for few hal rx tx
functions as the macro value differs between the chipsets.
Assign target specific hal tx, rx ops as part of hal_attach
and call respective hal tx, rx ops through callbacks.
Change-Id: Ibbf490c678c39fdd9d54191aad7aaec786db30ec
As per the updated spec, 11AX PPDU's HE SIG_A data-5 field has added
LTF symbol field which is 3bits in size.
Add logic to parse the TLV coming from hardware and update the
LTF symbol value.
Change-Id: I05e2ff8ece7e14dc22ce747e9a9b906bf130462f
CRs-Fixed: 2235233
Add prints to track:
* Incoming TLVs in the monitor mode status ring.
* HE, HE-MU and HE-MU-Other values being passed to the
stack.
Change-Id: Ib23336353dc4a2253a62444b767d2a706ce372ea
CRs-Fixed: 2242514
Process WIFIPHYRX_OTHER_RECEIVE_INFO_E and
WIFIPHYRX_OTHER_RECEIVE_INFO_RU_DETAILS_E TLVs in monitor mode.
Change-Id: I9cea6cee0499fd9ae9e07d4479c7010e35f3e5a5
CRs-Fixed: 2242514
nbufs received on wbm_release ring were chained based on
first_msdu and last_msdu bits if the peer is invalid for these
frames, but these fields in the rx tlv header were in-correct as
hardware does not decap these msdu's.
Based on inputs from firmware we now changed this logic to
using phy_ppdu_id field from the rx_mpdu_start tlv & rx_attention tlv.
Change-Id: Ifc7faa2d1b0585bcc226e5cb2045fcb29d152273
HE field in radiotap header are not being updated for MU frames.
Add support for MU-MIMO and MU-OFDMA frames.
Change-Id: If33e9f9039c8df6e1bb8f591879d4defed184ac8
CRs-Fixed: 2191215
Fix the issue where the MCS rates for HT were repopulated
causing the MCS rates to be decoded incorrectly.
Change-Id: I73efac79d853b6f8af966aec57e70ad645418528
CRs-fixed: 2206784
In existing code, the RX payload buffer for M-copy mode contained
RX MSDU payload followed by additional TLV data.
Add change to strip the skb and only provide MSDU payload
Change-Id: I9834fabfb0e26404a620d8419e7c570fff68f182
