Disable the common pbr clk register only when no one uses
RX0 and RX1 channels.
Change-Id: Ia5fab1d3e4be7d9ecb01ad0b612b9f6ef7406bea
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
add flags to avoid race conditions in on/off for digital clock ctl HPHL and EAR path.
Change-Id: I4b4fee2e90d8e1024176fdf5b36f89d219431300
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Out of bound check for wsa dev mode.
Change-Id: I7a244b8f7a55e4ced06991ce8e945d737eac6f77
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
During SSR down event,
ensure swr gpios are put to sleep even in error conditions.
Change-Id: I649d088d0bc429c9b7a02304272eaea06774ca51
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
Enable the clk as per sequence.
Change-Id: I54d6981a70b218d4655514bb69ff39a7581264a2
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
While measuring the adc, if PA is on we will get incorrect values of
adc due to which the detection type is missmatched. So disable the PA
While measuring the adc values and restore back PA once measuring adc
done.
Change-Id: I5833452e23a71637353449bb48b937ee44be24ae
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
updated the out of bound check for comp_mode
if any such occurence happens setting it to default mode.
Change-Id: Ie4a7275d45af6a96f1a2ec4b6ece6dc7a5dca464
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
add pm stay awake before the queue delayed work to avoid the when apps suspend.
Change-Id: Iad4d55d509e800b352ac7cb8afb0824a89c80c40
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Use BIAS_LEVEL_OFF trigger from ASoC to mark the wcd/wsa power
supplies to LPM (if supported).
Change-Id: I9afdd255ecb385176de82813ed9a638adfdf0292
Signed-off-by: Uppalapati, Phani Kumar <quic_phaniu@quicinc.com>
Enable the VI decimator at the end of Rx and VI enable sequence.
Change-Id: I12045c903b29d4cc830dbbfd242d805a629c0efd
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
Update ch_msk and audio path for VI feedback path
in lpass_wsa2 macro.
Change-Id: Ibc96fc1ad82e2e996b11af20522f35e47b94d8f0
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
Update index to read bat cfg from dtsi.
Change-Id: I48ca32d149e14d8ce917be1ffa0822233f69239c
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
During any restart scenario, it is possible for WSA L and WSA R
to be enumerated differently than bootup, causing them to get assinged
with different swr dev_num than during bootup. Add logic to ensure that
during restarts, the swr port params from device tree are reset in
swrm driver to ensure that they match with the new dev_num.
Change-Id: Ied3eca08a95c8d6a92397c446f7c10f41886f29e
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
After ADSP is up during SSR, core_hw_vote may fail and audio_hw_vote
may successed in lpass_cdc_runtime_resume which is caused some timing.
When getting slave device_id, as core_hw_vote is 0, it will skip reading
swr registers and return 0 which causes fail to read correct device_id.
Make this change to avoid calling lpass_cdc_runtime_resume when adsp_up
notification doesn't reach lpass_cdc.
Change-Id: I90a97e5c47bb95180a96ba1c60b462f1fa0124b7
Signed-off-by: Meng Wang <quic_mengw@quicinc.com>
Signed-off-by: Kunlei Zhang <quic_kunleiz@quicinc.com>
Implement backend for CPS soundwire port in Bolero.
Change-Id: Ibbd38d067e46be1a71723de04a83bc83f0ec2925
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
Propagate all changes to lpass-cdc-wsa-macro to
lpass-cdc-wsa2-macro. Leave get_channel_map alone
because it is wsa macro specific.
Change-Id: I46733a759490d488f46eda24b4006a1dec63c7cc
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
update check not to exceed the array index for active_ch_mask and active_ch_cnt
Change-Id: Ic6d72d7469edbd004cd34a709384d527e90cd26f
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
