In cdp_soc_deinit peer hash table is freed to add
check to avoid NULL access from CDP APIs which may do
peer hash find
Change-Id: I47c4126c34bb64d43112a4f8e268da1a98f4124d
This change will add a build flag support to MSCS wherein
the functions will be called based on the status of the flag
created. This flag will be enabled by default.
Change-Id: I1c234c710d3b37f534ed2df7b37343cbd65ab930
CRs-Fixed: 2757257
For lithium based HST/HSP, CE4 is no longer used for data TX,
just few HTT msg for ring configuration, 2048 entries requires
16 * 2048 = 32K ring consistent memory which looks is not necessary,
reduce CE4 ring entries number to 256.
Change-Id: I117ec81cbee3642d640457c37a7ab900ddcae3f5
CRs-Fixed: 2757925
Sometimes frames are queued to dp_rx_thread wait queue
during WoW suspend in progress. At this time dp_rx_thread
is in SUSPEND state and these frames can't deliver to Linux
Stack, for ICMP case, if no other frames come to wake up
system, ICMP timeout will happen. Add a RX suspend check
in WoW to avoid suspend when frame comes before WMI_WOW_ENABLE
sends to FW
Change-Id: I756d3127f75da8f0e6e303c1250c01ce0c6ac573
CRs-Fixed: 2756263
In tx desc store vdev_id to avoid unprotected access of
vdev memory.
In tx path pass VDEV as argument to all APIs
In completion path get vdev from peer as vdev reference
in peer is protected with reference, in places where peer
is invalid get vdev object using vdev_id stored in tx desc
with a reference count
Change-Id: I364ebb51143218872c0bc6f856772ab1df00bb17
When get vdev by opmode from psoc, objmgr will return vdev without
getting reference if vdev list isn't null and no matched vdev with
opmode.
Change-Id: I1bb29f074155a40c38a21a9f0534d5f756862031
CRs-Fixed: 2758693
Add support for vendor attributes to update channel tx_time
and rx_time to the user space.
Change-Id: Ifdb50d8f7bcdcf8a560d174cd34efcb1991768a9
CRs-Fixed: 2757211
To get the channel state for 5g bonded channel using the freq
use wlan_reg_get_5g_bonded_channel_state_for_freq.
Change-Id: I0b42e9c547ba70259e88137a5a26c238cd66da8d
CRs-Fixed: 2756463
Add service bit support for channel tx and rx time in channel stats.
This service bit helps in not interpreting the default values for
tx_time and rx_time when new driver version is used with old firmware
where this tx_time and rx_time support is not present.
Change-Id: Icc7668f5842677ac6ef48176568301753e217ea7
CRs-Fixed: 2751500
Since few of the BSS scoring weightage is not applicable to AP platform
i.e WIN, use macro to set the default values for both WIN and MCC
platform.
Change-Id: Ic40deaab2621215c7bfc02c7cde082b81761f27b
CRs-Fixed: 2746158
When the option -Werror=tautological-compare is enabled, the compiler
reports error because bitwise comparison always evaluates to false.
Change-Id: I7532dc9bccb69e02be5f04897a6ecaff44e84a0d
CRs-Fixed: 2734883
To send received raw event buffer to event handler
Send without processed buffer to registered event with buffer
type WMI_RX_RAW_BUFF
Change-Id: I2a401e2e7afbfd8f32d4bd521d184ed9ddcdb264
Remove unnecessary assignment in wlan_serialization_destroy_cmd_pool
to avoid false alarm in some static code analysis tool.
Change-Id: I6f53b9c44534dc6297cf872dce0a265e1696d90c
CRs-Fixed: 2751743
CE2 status ring full condition results in WMI req timeout
in host resulting in self recovery being triggered.
Set IRQ affinity of CE IRQs to gold cores for defconfig
builds only. This is to alleviate the processing of all
DP rings and CE rings on CPU0.
CE2 status ring will be reaped fast enough to ensure host
has enough credits from FW to send out the WMI reqs to FW.
Change-Id: Ifef338faac17b44eae811d23ec41d89bde1b29c7
CRs-Fixed: 2738317
Enable AUTORFI-3223 LTE coex with remote telematics unit:
When Telematics unit (modem) is not located on the SOC as Wi-Fi chip,
the OEM's system can still get LTE channel info from the modem and
pass it to Wi-Fi driver from an OEM app. This request is to provide an
API from Wi-Fi layer to OEM's app to receive the LTE coex channels,
After wlan driver received this info, channel avoidance algorithm will
run and SAP will adjust Wi-FI channel accordingly.
Add API in regulatory to receive channel avoid cmd from os_if/upper layer.
Change-Id: I0099b2ef69eba30ad0fc9bca448225ab283ed6b7
CRs-Fixed: 2750727
Add INI to modify the HW checksum capability advertisement.
Add hook to update enable/disable of HW checksum for vdev.
Change-Id: Idd0bad1d39c8411c7b4ef19483aa2c75a756791b
CRs-Fixed: 2732099
Rename struct wmi_mawc_roam_params name to wlan_roam_mawc_params.
Rename struct wmi_bss_load_config name to wlan_roam_bss_load_config.
Rename file wlan_cm_roam_public_srtuct.h name to
wlan_cm_roam_public_struct.h.
Change-Id: I3e05d899810f8e899b5d6f48a3aa48c041cd17e3
CRs-Fixed: 2758137
Retrieve the max users per-PPDU supported in Uplink
and Downlink direction, from the fixed params of WMI
service ready ext2 event.
CRs-Fixed: 2747218
Change-Id: Ib9f9bd4313dd1955c607d4fe77b02e34761d1c20
Add debug support for VDEV refcount to take
refcount by module id and decrement corresponding
refcount with same module id
Change-Id: I15c075816994ba70155fefbc0bce208b20fb9a59
Add new API dp_vdev_get_ref_by_id() which will return vdev
pointer by holding a reference. Caller of this API has
to ensure that this reference is released by calling
dp_vdev_unref_delete() API
New lock soc->vdev_map_lock is introduced to protect
vdev id to object array
Change-Id: I883e328932e35ef31254125492dbae20cebe0e00
This commit does the following enhancements to the TWT interface:
Corrects the documentation for QCA_WLAN_TWT_SUSPEND and
QCA_WLAN_TWT_TERMINATE. Specifies that these operations carry the
parameters obtained through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. This
interface is very recently introduced and missed to document the same.
There are no user space or driver components using this interface yet.
Hence, enhancing/modifying the interface.
Corrects the documentation for
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_DURATION. Mentions that the units it
represent is a multiple of 256 microseconds rather than a TU. The host
driver always interpreted this as an unit in 256 microseconds and there
are no user space implementations that are impacted with this change in
the unit. Hence, modifying the documentation.
Introduces QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT2_TWT_SIZE, which is
similar to that of QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT, but carries
an offset/data of u32 size.
Introduces MAC_ADDR attribute to represent the peer for the TWT setup
and resume operations.
CRs-Fixed: 2755972
Change-Id: I1c43b9942489177af9b48639d1cb4fd20dfdd80b
Per channel maximum regulatory bandwidth depends on country
bandwidth settings and the reg-domain bandwidth settings.
Therefore, take channel bandwidth into account in channel
bonding calculations.
Change-Id: I9d206c2fd8c5535eba813ac1da2878592ef5019b
CRs-Fixed: 2729638
Do not do PN check for open security mode defrag frames as it
is not applicable.
Change-Id: I7ed1073953c08b191c15c659a0d216eb7ed49b31
CRs-Fixed: 2753520
frame control for second and subsequent user are zero which overide the
master frame control. Added fix to update master frame control from user
position zero.
Change-Id: Ic0331dd5d486fbffa44d29c74b4f1f15414d0a65
The 'timestamp' field in CFR meta data corresponds to TSF
at the reception of PPDU in micro second unit. To capture
timestamp for one shot, periodic and repetitive channel
capture, this field is being used.
case 1:
For one shot and periodic capture, the clock used for
timestamp is private to the target and not visible to host.
So it is being passed by FW to host and the placeholder
being exchanged between Host and target is of 32 bit.
case 2:
In case of repetitive channel capture, the
timestamp is being populated from the received PPDU,
which is 64bit.
To accommodate the timestamp, in both above cases, change
the data type to u_int64_t from u_int32_t
Change-Id: Ifa612bd97dc4f597368daefcd4224b84f2484c03
CRs-Fixed: 2751408
HAL changes to fetch cfr information from
PHYRX_PPDU_END_TLV & RXPCU_PPDU_END TLV
Change-Id: I5817fdc5d17ebea3f2376b7bef9e58981198d1ec
CRs-Fixed: 2752943
Enable CFR support for IPQ5018.
Calculate stream FS buffer length based on CFR payload,
CFR uCode header and CSI metadata.
Change-Id: Idd903ead75d635ce87ffc0df80e5c32fb62d15aa
CRs-Fixed: 2751408
Repetitive channel capture configurations usually support
16 groups to be confugured. To check if a particular group
is enabled by user, qdf_test_bit is being used here.
qdf_test_bit usually operates with uint32_t and it takes
the argument as unsigned long type. Since,
modified_in_curr_session is declared as uint16_t, and then
typecasted into unsigned long.
Change the data type of modified_in_curr_session
from uint16_t to 'unsigned long' to avoid compiler
issues.
Change-Id: Iec778dc36d5671f2cfb643c9ced1bd2a6104de2b
CRs-Fixed: 2753267
Currently, when an extension descriptor is used during TX datapath, we
use HTT metadata length + msdu extension descriptor length, even we
do not fill HTT meta data. This is inefficient and hardware will end up
doing DMA of extra HTT metadata, even when not needed.
Include length of metadata in TCLdata command only if HTT metadata is
filled in.
Change-Id: Idd1b053c1c6bd8b39880efe5743980667454df0d
CRs-Fixed: 2738733
In Dependent Repeater, if the Repeater STA is connected to a Root-AP
in a DFS channel, then the Repeater AP which is configured in ETSI
domain comes up in the DFS channel doing CAC.
In FCC domain, whenever Spoof radar pulse comes, we check if the Spoof
check is done and skip the CAC accordingly. In case of other domains,
Spoof events are not present. Therefore, Spoof test can be always
considered complete for non-FCC domains. Also the test can always be
considered complete if the target/FW does not support spoof test.
CRs-Fixed: 2756845
Change-Id: Icac4dee5f3f69a2578a0a34d7aea9456aab63ece
SKB frag debug framework is required for debug purpose of frag based
approach in monitor mode
Change-Id: Ic7a5a2c3d7397c4d7dd2c5db32802b0f694e6101
CRs-Fixed: 2736136
The Tlv of the hang data is reduced to 2bytes from the 4bytes
change the structure defnitions accordingly.
Change-Id: I675e4d837afa92496aeebec408ebfd90cbb7ad32
CRs-Fixed: 2753821
This change will acquire MSCS parameters from the
MSCS request sent by the STA and provide it to the
data path which will later use it for building flow
database.
Change-Id: I972154792c682527f8df04de693077188726e8da
CRs-Fixed: 2669386
In defconfig build(QDF_LOCK_STATS = 1 for slub debug enabled) increase
spin lock bh max time allowed to 2 seconds to accommodate for cache thrashing
and slow execution because of many debug features getting enabled.
Change-Id: I817d63a264079d25fed8a7ba1dbd9db5391abcdd
CRs-Fixed: 2754993
Currently wifi positioning api to update channel bandwidth
info is invoking regulatory component api to set the channel
params with BW as CH_WIDTH_MAX, because of which regulatory
component is returning the maximum BW supported for the current
regdomain which is 160MHz. If target does not support 160MHz in
that case it may lead to undefined behavior.
To address this issue, pass max supported BW by target as
argument to regulatory component so that regulatory component
does not return the BW greater then the target supported BW.
CRs-Fixed: 2730665
Change-Id: I6051336ab2f3ea902a70ed80290e5a5f060de5b9
The driver doesn't copy the current rssi threshold for the
periodic roam scan trigger.
Copy the rssi threshold value for Periodic roam scan trigger
also.
Change-Id: I6745d5d6e011299d3fee9f89785083138b330183
CRs-Fixed: 2752991
