Add a new attribute QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_SP_START_OFFSET to
configure offset to shift start of the service period. This attribute
will be used when device supports flexible TWT. If provided, this
attribute will override QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_WAKE_TIME.
Change-Id: I1f066f328c6d0f3ca4d4bf4a94e63647d639f49d
CRs-Fixed: 3299714
Currently vdev reference is not released in api
osif_send_roam_auth_mlo_links_events().
To solve this release vdev reference to avoid leak.
Change-Id: Idc766925f5cd71cbdd577ee7b67abffc35130dd9
CRs-Fixed: 3305547
Enable/Disable responder 11az ranging based on the below ini:
"enable_responder_11az_support"
With "enable_responder_11az_support" disabled, the below ext
cap advertisement will be disabled:
Non-TB Ranging Responder
TB Ranging Responder
and below vendor capabilities advertisment will be disabled:
QCA_WLAN_VENDOR_FEATURE_PROT_RANGE_NEGO_AND_MEASURE_AP
QCA_WLAN_VENDOR_FEATURE_SECURE_LTF_AP
Change-Id: I82eb70615f8daf82e98e7600418e07fad0672b76
CRs-Fixed: 3296410
After mlo roaming is complete send roam auth mlo links
event to kernel.
Also populate cfg roam info structure with mlo link info.
Change-Id: I8710e3a53f05c50b7b276d87a39411cb43d0983f
CRs-Fixed: 3279967
Fx the following compiler error:
qca-vendor.h:5892:54: error: result of ‘1 << 31’ requires 33 bits to represent, but ‘int’ only has 32 bits [-Werror=shift-overflow=]
5892 | QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40INTOL = 1 << 31,
This "1" needs to be marked unsigned for this case of MSB=1.
Change-Id: I27daebd07d0cbf314459254cfc5906f5e56dd4be
CRs-Fixed: 3299457
Reproduce steps:
1. Connect from OSIF success, wdev->connected = true;
2. Disconnect from target if and reassoc from OSIF happens back to
back.
3. Disconnect event is not sent to kernel, wdev->connected keeps
true, isn't cleared.
4. Connect from OSIF failed too, wdev->connected keeps true, isn't
cleared.
5. Scan with random address failed since wdev->connected is true.
To fix it, if connect req was a reassoc req and received in not connected
state for race between disconnect from target if and reassoc connect from
OSIF, set reassoc_in_non_connected to send disconnect instead of
connect rsp to kernel to cleanup kernel flags like: wdev->connected.
change-Id: Ibbe38da14e9339b49589216250453b76c7387b57
CRs-Fixed: 3290496
Validate the result of spectral specific ucfg control operation
after processing the control request to get the spectral system
capability information and the spectral diag status.
Throw error if it is an invalid operation.
CRs-Fixed: 3272699
Change-Id: Iba1b165caa41a7b4a133e9d9f3df7203a60a2b75
Add a new QCA vendor attribute to configure the periodic sounding for Tx
beamformer functionality.
Change-Id: Id4b75e992e22facdc58b467aaed29d9b00901fad
CRs-Fixed: 3290371
Based on the new requirement process tx and rx rate counts
from peer stats response and send these stats to user space
as part of big data stats.
Change-Id: I988f0d6cf6a3537f31433d4f57280336ab58bc38
CRs-Fixed: 3289789
Send only the scan entry for Tx profile to upper layer. As in cfg80211,
it goes through every nontx profile to from a new frame.
Change-Id: I4f01a1a5ed61bfd2a2b8a541c8d3be14ffa2e3c9
CRs-Fixed: 3251364
Add QCA_NL80211_VENDOR_SUBCMD_GET_SAR_CAPABILITY to get various SAR
capabilities supported by the WLAN firmware to userspace. These
capabilities are usually reported by the firmware during the initial
bootup handshake with the driver. Based on these capabilities, user
space can choose proper SAR indexes.
Change-Id: I31be4bd58dc02fe82ae57f703f7db54f5a3c027e
CRs-Fixed: 3274703
If there are more than 1 preferred network list in schedule scan, after
6 GHz channels added to pno channel list of 1st network list, channel
num is updated and set for 2nd network list wrongly, then OOB happens when
6 GHz channels are added to 2nd network list.
Change-Id: I2658620ce4e6e8dcf93e810c7bc10364e4de7a73
CRs-Fixed: 3280705
Enhance QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH event for the
driver to indicate the information of the associated links of MLO
roaming.
Change-Id: I5cede840ec42bb45ec13e35a1f5caa0c0674047a
CRs-Fixed: 3278009
Current code directly passes the result of wlan_vdev_get_psoc(vdev) to
wlan_objmgr_get_peer_by_mac, without null pointer checking, which can
result in null pointer dereferencing.
To fix this issue, add checking of the psoc pointer before passing,
and add verification inside wlan_objmgr_get_peer_by_mac.
Change-Id: Iaf0e2535c3a584db788ddc621745c66c296fe08f
CRs-Fixed: 3277651
Add a flag to indicate assoc req is used for this roaming,
don't treat assoc req as reassoc req.
Change-Id: I58f357b5581ca71e97841f1d7e0f3daad5d60970
CRs-Fixed: 3273877
As per single netdev design, after roaming is completed on link
vdev retrieve assoc link net device and use that for roamed indication
Add osif callback api to hdd to get assoc link net device
Change-Id: I9c8fcd4b095580548b8251818d0f6823df7a52aa
CRs-Fixed: 3274570
Previously when chains of BT and WLAN 2.4 GHz are separated,
hybrid mode will be used for BTC. Now adding fixed FDD mode
to fulfill different BTC scenarios.
Change-Id: I8f415ae65160977df478c9bd908e9429d69103c3
CRs-Fixed: 3247146
This reverts refer to the Commit-Id
bfe1e87b25.
Driver will enable 11be and MLO feature support.
Change-Id: I8dea7ecc7ac7b8f914c05720aa4c6139f95ab066
CRs-Fixed: 3214037
Fix the condition to fill the source mac address
during initiate PASN authentication
Change-Id: I997e24e8d4654b6ccb4376b790659f2c79d45256
CRs-Fixed: 3253353
Add logic to set back port flag based on Linux kernel version
for multi AKM connect support.
Change-Id: Ia2365afc678edf025f63d4d3c0fc963c97193eb8
CRs-Fixed: 3246135
In connect resp, while sending the connect resp indication to supplicant
fill mlo parameters only if connect resp status is successful
Change-Id: Ifa1baf34deaffff68e98b81bd20a4939aaec170f
CRs-Fixed: 3250884
Add QCA_ATTR_ROAM_CONTROL_RX_LINKSPEED_THRESHOLD value as the RX link
speed threshold to disable roaming. If the current link speed is above
the threshold, there is no need to roam.
Change-Id: Ifeeacfa9d49de76c28fe968c1eb26b5036261c9a
CRs-Fixed: 3200264
Add vendor command QCA_NL80211_VENDOR_SUBCMD_COAP_OFFLOAD to
enable/disable offload processing in firmware for CoAP messages
(RFC7252: The Constrained Application Protocol) or fetch the
CoAP messages cached during offload processing.
Change-Id: I2eaeba58ec6bc44738f68eb00c36ebdce2eae6f8
CRs-Fixed: 3193633
Add feature flag to indicate support for sending authentication
frames with Link Address.
Change-Id: Ifbd28b8d474b28b0e85a23c9c91ebccedb381d9c
CRs-Fixed: 3239304
Add the following two vendor attributes to send TIM beacon
statistics to userspace which can be used for power saving:
QCA_WLAN_VENDOR_ATTR_LL_STATS_TIM_BEACON
QCA_WLAN_VENDOR_ATTR_LL_STATS_TIM_BEACON_ERR
Change-Id: I2986d7e573ed7eaf72a620b928daceccc43b9066
CRs-Fixed: 3234924
Add support for initiate pasn authentication using the vendor
command: QCA_NL80211_VENDOR_SUBCMD_PASN
Fill the below required attributes to initiate PASN:
QCA_WLAN_VENDOR_ATTR_PASN_ACTION
QCA_WLAN_VENDOR_ATTR_PASN_PEERS
QCA_WLAN_VENDOR_ATTR_PASN_PEER_MAC_ADDR
QCA_WLAN_VENDOR_ATTR_PASN_PEER_SRC_ADDR
Change-Id: If33f54eafe5986b4571cc21a80fb0b61578db116
CRs-Fixed: 3232261
Add a new vendor subcommand QCA_NL80211_VENDOR_SUBCMD_SCS_RULE_CONFIG
for configuration event of Stream Classification Service (SCS) rule.
Also define the attributes present in this subcommand.
Change-Id: Idab722532f9870a377e5f1c02185bdfe2ccb39eb
CRs-Fixed: 3226253
Add enum for SCS rule configuration index.
This index is used by vendor subcommand
QCA_NL80211_VENDOR_SUBCMD_SCS_RULE_CONFIG while sending NL event
to SCS daemon.
Change-Id: Ic2491d8ec6c2f13f5c45ebaec189b239f0ee9933
CRs-Fixed: 3241704
Add a new QCA attribute QCA_WLAN_VENDOR_ATTR_CONFIG_DBAM
to configure Dedicated Bluetooth Antenna Mode (DBAM) feature.
It is used to switch between dedicated antenna mode for BT and
COEX shared antenna mode for WLAN and BT.
Change-Id: Id1e04e8647a0b4ff6bb83f272c0f891aa88f111c
CRs-Fixed: 3239894
Set 11az Ranging related extended capabilities over the
wiphy extended capabilities. Mask these fields for SAP iface
Change-Id: Ib6ce92f42d7125b4e9532d5c893ffe955be0f0dc
CRs-Fixed: 3235143
Add feature capability indication for P802.11az security for the drivers
to advertise capabilities such as secure LTF support, secure RTT
measurement exchange support, and protection of range negotiation and
measurement management frames for station and AP interfaces
independently. This allows a more fine-tuned capability indication as an
alternative to the upstream nl80211 mechanism that is not specific to
the operating mode.
Change-Id: I53073fec66abf38986038ab9e4d17531ddd67b5a
CRs-Fixed: 3235149
Donot advertise TB and NTB ranging support as kernel
doesn't support that flags.
Change-Id: I43ba16a7130dfc570c371db8474bbc136e576173
CRs-Fixed: 3233041
Define QCA vendor interface for PASN offload to userspace from the driver.
The driver can send this command as an event to a userspace component to
perform PASN authentication with a list of peers with which the driver
needs to do ranging. The userspace component, if capable of performing
PASN handshake, can perform PASN handshake with all the peer devices and
set the relevant keys by sending the
QCA_NL80211_VENDOR_SUBCMD_SECURE_RANGING_CONTEXT command for each peer
to the driver.
Once PASN handshake is completed with all requested peers, the userspace
component sends consolidated status for all the peers to the driver. The
consolidated report is required for the driver to understand that the
PASN handshake process is complete and whether it succeeded/failed for
each of the peers it was requested for. The secure ranging context is
configured only for the peers with which the PASN handshake succeeded.
When the driver requests PASN keys, the userspace component can set the
keys from its cache if those keys have not already expired and were
derived with the same source MAC address that is requested by the driver
instead of doing the full PASN handshake again.
If the driver detects that current keys of a peer are not valid anymore,
it sends a notification to userspace using the
QCA_NL80211_VENDOR_SUBCMD_PASN command and setting the action to
QCA_WLAN_VENDOR_PASN_ACTION_DELETE_SECURE_RANGING_CONTEXT. The userspace
component should delete the corresponding keys from its cache.
Change-Id: Ib6e2c7baf7728dacf0303513c5a41412dae40b8b
CRs-Fixed: 3224160
Vendor command to get the WLAN radio combinations matrix supported by
the device which provides the device simultaneous radio configurations
such as standalone, dual band simultaneous, and single band
simultaneous.
Change-Id: Ic3fb07ede1b716a08c476292446dae3d6ad73ee5
CRs-Fixed: 3214052
Add a new QCA vendor attribute
QCA_WLAN_VENDOR_ATTR_ACS_LAST_SCAN_AGEOUT_TIME to
QCA_NL80211_VENDOR_SUBCMD_DO_ACS and opportunistically optimize time
taken for ACS scan. Avoid scanning the channels which were scanned
within last QCA_WLAN_VENDOR_ATTR_ACS_LAST_SCAN_AGEOUT_TIME milliseconds
and use scan results from scan results cache for ACS scoring. For other
channels, perform ACS scan and use the received scan results.
Change-Id: I5f57002566870fea7444358711205392e5e84053
CRs-Fixed: 3226134
Register OSIF callbacks with Wifi_pos module to initiate PASN
authentication request.
Call cfg80211_pasn_auth_request() to initiate PASN authentication
from wpa_supplicant for the list of secure peers.
Change-Id: I52b9518526f1b04ad520f2f19c7a4caa9b62b6b0
CRs-Fixed: 3149968
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_CMDID: Add support
for a new roam command to get vendor control parameters
from FW. Host needs to send proper param ID in command
(from enum WMI_ROAM_GET_VENDOR_CONTROL_PARAM_ID)
to get corresponding INI value from FW.
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_EVENTID:
Add support for a new roam event to get param value
from FW. FW sends this event upon receiving
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_CMDID command.
Change-Id: Ic7b3badb14daff183dd36927b4dae6bbc036e6cd
CRs-Fixed: 3225166
Update the connect request crypto parameters based
on the new kernel changes to increase the size of the
akm_suites array in connect request
Change-Id: I6e9cecdb6fa02da5f2b2e238780d3f0fb389c8a2
CRs-Fixed: 3214567
Add QCA vendor event to indicate user space that the driver
recovery is completed after the internal failure.
Change-Id: Ib65c9773dd64fab36ba10493c27bd670c2bb6d08
CRs-Fixed: 3226415
Add attributes to indicate reassociation request and response events from
driver/firmware.
Introduce new attribute for Association ID.
Add support to listen for BT Coex for SCAN DONE diag event.
Change-Id: Ieedd0d154cd3287aca23c03ca573b87e8127726e
CRs-Fixed: 3221625
When the SSR and interface down happen in parallel,
the driver rejects the interface down since the
recovery is in progress. Kernel ignores the -EAGAIN
request from the driver and as part of NET_DOWN notification
in cfg80211_netdown_notifer the kernel invokes the
___cfg80211_scan_done to free the request but doesn't not send
scan_result indication, since it expects the scan_done work to
get scheduled and then broadcast the request to upperlayer.
The scan done checks currently only if the interface is up replace
it with driver specific internal driver state.
Change-Id: I0e5ac319783b9c1a69e7e19674f76f20da1d1590
CRs-Fixed: 3202812
Add QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_11BE_EMLSR_MODE
value to allow or disallow eMLSR hardware mode for 802.11be
MLO capable devices. If this attribute is set to 1, and if
the FW supports this capability too, then the STA host
advertises this capability to AP over assoc request frame.
This attribute will not have any effect on legacy devices
with no 802.11be support.
Reference - https://w1.fi/cgit/hostap/commit/
?id=563162a5f521965e582acc32d7ce3034fa8fb32e
Change-Id: I4ae2cbbc6adcfef8fbc225bef60b3597771786f7
CRs-Fixed: 3185027
