When adsp/wdsp SSR happens, WDSP_SSR_TYPE_WDSP_DOWN/WDSP_SSR_TYPE_CDC_DOWN
would get received by wcd-dsp-mgr. wcd-dsp-mgr would clear current work and
init wdsp when adsp is up and ready_compl flag is set to ready. Sometimes
ready_compl flag is not cleared and wdsp initialization would happen when
adsp/wdsp is down which would cause kernel panic.
Reinit ready_compl flag when adsp/wdsp SSR happens.
Change-Id: I45186abba7992ee6912c5b0da171ef37b04e2e71
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Use msmsteppe target name instead of macro as macro
cannot be used in target rc file.
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Change-Id: I0f3ec299b28b7dfd9f8ac9985eea0c22a4611f9e
Enable power supplies and reset of Tanggu
CRs-Fixed: 2281591
Change-Id: I7d693263f328b51d2f333bddac5e15e98a5f9f51
Signed-off-by: Tanya Dixit <tdixit@codeaurora.org>
ASoC core assigns dai id value to num_dais if
AIF dai-id passed is 0. Since we have different macros
passing AIF dai-id as 0, they are replaced in ASoC core.
To handle this, update AIF dai-id in respective macros
to start with value 1.
Change-Id: I222c088289292aa226c90710e56a8c94af5615cd
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add interface to read swr port mapping from device
tree and call connect port to swr interface from
wcd937x codec driver.
Change-Id: I82e8d7a8063b725292e0d7ca5e519f279289efe0
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
For ADIE loopback, MCLK needs to be enabled.
Associate the macro MCLK widgets to respective
rx and tx paths in route map.
Change-Id: I5632c3016146c5c5d822ae6fe438010904cf434b
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
On bolero and tanggu combination, enable digital side
class-H by default.
Change-Id: I366a7217dbbe7640846275eea57ef0c61cfcdf5e
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
When temperature on a single wsa881x device is being read,
then soundwire master wakes up both wsa881x devices but
regcache_sync is happening only for one wsa881x device on
which the temperature is being read. This results in
audio playback mute after temperature read. Fix the
regcache sync during temperature read and playback usecase.
Change-Id: I054f4432d7ae7bce922341ad62b20544cccd5865
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Due to the local char array that stores the codec dsp control command
is not initialized, an invalid command could cause the stack content
to be printed out in kernel dmesg. Initialize the array with memset.
Change-Id: I739eacb5058275c91bef67505531097cb364b93e
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Due to the local char array that stores the codec dsp control command
is not initialized, an invalid command could cause the stack content
to be printed out in kernel dmesg. Initialize the array with memset.
Change-Id: I07211c4cc06b2c2df21b674e6812c4d5efc45dc4
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Fix set sampling rates for Rx Codec DMA interfaces.
Use uint32 instead of boolean properties for
audio interfaces and tavil codec enablement in
sm6150 target.
CRs-Fixed: 2281591
Change-Id: Id5cb212a8e319437c0efd02e9a900eedf63eae58
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Add wcd937x swr slave and codec driver.
This adds only basic support for codec registration.
Change-Id: I87519a234f14d34a019c8f66652b7224759e639c
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
In noirq push pull mode channel map needs to be set during
ASM open shared io stream. Add support for no irq driver to
set channel map during ASM shared io stream open.
CRs-Fixed: 2267809
Change-Id: Ic1abfe60bb54b6529fbb4cf999e50196befaba46
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Add machine driver for SA8155 based automotive platform,
which is based on mobile machine driver with addition of
extended support for TDM interfaces which is used for data
transfer between SA8155 SoC and the automotive COODEC H/W.
Changes include TDM backend and refactored automotive
frontend DAI links as well as kcontrol functions to
configure TDM slot and offset configuration.
Add 815x machine driver init wrapper to allow registration
of multiple machine driver in single module init call.
CRs-fixed: 2268293
Change-Id: I30eb22a7c5d6b2d963a5ea621b5a00e8dbc27fed
Signed-off-by: Derek Chen <chenche@codeaurora.org>
Add separate config for generic IRQ using regmap-irq and
compile it as a part of wcd_core ko.
Change-Id: I844ad72bf039c851a67d968e4b67c10105389932
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add irq utils support for tanggu codec. It is
based on regmap-irq framework.
Change-Id: I93ad71f41a8bf62313bee5b6c374809c93219f5c
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
