Add feature flags DP_FLOW_CTL for DP flowctl ops,
DP_PEER_SUPPORT_OPS to support peer handling in DP,
DP_POWER_SAVE for power saving ops in DP, DP_CON_MON DP_MOB_DEFS
DP_INVALID_PEER_ASSERT DP_PRINT_NO_CONSOLE and DP_INTR_POLL_BOTH.
Change-Id: I01dafadf6578c0b5f36ab3ef56624912fb66b100
CRs-Fixed: 2467170
Read rssi_chain per nss per bw and from rx status TLVs
and update to host data structures.
CRs-Fixed: 2445933
Change-Id: I275e9e502a0a724410fc189ac293cadc8f2981e0
Identify the WIN/MCC specific features. Move the features under feature
specific flags. Get rid of WIN/MCC specific code.
Change-Id: Iaf4e5befd7d574a20bea5c078201adbeac3b762c
The following changes are made
-Yield dp_rx_process if poll time exceeds
-Yield dp_tx_comp_handler if poll time exceeds
-Interrupt statistics to track various interrupt contexts and
corresponding interrupt masks
-Add poll times histogram buckets to NAPI stats
Change-Id: I8c7a6bbbb97c7b3dd1dde6ac3a97113c433086a2
CRs-Fixed: 2423879
Currently there is no support to update tx stats for
non-qos frame. Update tx stats for non-qos data frames
Change-Id: Ib61dd6e3b0c676b5af806c4b1e5cca22ea6ffaa5
CRs-Fixed: 2421925
Add support to measure interrupt latencies, store them
in different "bins" and display the constructed histogram
through user command.
Change-Id: I268be6b39745d550ac7db5d321c2d1fdb2d17d41
CRs-Fixed: 2365812
Increase the maximum allowed OFDMA users to 37
from previously set 8, in cases where more than
8 clients are connected and the PPDU has information
for multiple users like in Trigger frames.
Change-Id: I6b0b9092674514c831694457fc71e68fee512e1f
To avoid using qcacld code in cmn, when getting
wlan op mode, using op mode info from vdev rather
adapter.
Change-Id: Ida5a7aa6c793e955122a4bbf3bf0fa1fa5cbf7a3
CRs-Fixed: 2412317
Delay counters per TID have been implemented for following types:
1. Linux stack to hw enqueue delay
2. HW enqueue delay to tx completion delay
3. TX interframe delay
4. RX interframe delay
5. RX frame delay from ring reap to networking stack
Change-Id: I836596cbd878a43955c18b4981cb5b7b43d4df5e
Check for completion status of the ppdu based on
HTT_PPDU_STATS_USR_COMMON_TLV and
HTT_PPDU_STATS_USR_COMPLTN_ACK_BA_STATUS_TLV.
Update the stats only when completion status is ok else
update retry and failed frames count.
Change-Id: Iac7730715f853746d77873488b7886e7beed467d
CRs-Fixed: 2390383
VOW stats is an extension of regular stats to capture
all drops per TID. Delay counters per TID are also
included.
Change-Id: If6087f37b32cf9ae4bb405190a358ad3c9750dd2
Change API signature for dp_getrateindex to populate rate index
and add additional stats required for RDK.
Add QDF abstraction for EWMA average rssi
CRs-Fixed: 2397918
Change-Id: Id878971799c5df2ae60057a86b2769724ee0dcc5
populate TX OFDMA and TX MU MIMO information from
user rate tlv and display the same in fc_peer_stats.
Change-Id: If1dab15bbdf391fba00a701abd6024c420d1d8f7
Change the CDP abstraction APIs for ast entry find, add and delete
to avoid external references for ast entry in upper layers
Process the HTT v2 peer map messages which will be enabled for
nexthop ast entries and use these messages instead of WMI event
for HKv1 WAR where we have to wait for delete confirmation from
target event which is processed in control path
Change-Id: Ifa91a259c0762344deb8ab89e868fc5554d75543
CRs-fixed: 2354951
Packetdump invokes legacy data path API directly without
considering underlying HW:
1. ol_register_packetdump_callback
2. ol_deregister_packetdump_callback
Global pointer pdev_txrx_ctx will be casted to struct ol_txrx_pdev_t
always even Lithium (use struct dp_pdev) underlying, that leads to
struct dp_pdev be overwritten unexpectly.
Wrap with cdp API to avoid.
About packet-dump feature:
It is one debug feature/requirement for Android N, to track/dump
TX/RX data/mgmt. packets during connection. This enhancement can help
in debugging connection related issues.
This change only touches its data packet callback register API.
Change-Id: Ie63fd2dfa909f89741ccf0c5131f6d3305093a3e
CRs-Fixed: 2366334
Add support for GRO functionality for TCP packets.
- Pass GRO config to DP layer as a part of dp_update_config_parameters
- Add API to read the number of active RX contexts from DP layer
cdp_get_num_rx_contexts
- Fill GRO info into skb->cb from rx_tlv during dp_rx_process
CRs-Fixed: 2346995
Change-Id: I1c143d8ce2c7522ba2c76142fb6cc82193df5608
Change max OL_TXRX_NUM_LOCAL_PEER_IDS to 35 to take care of
STA + SAP + P2P concurrency.
Each AP will occupy one ID, so it will occupy 2 IDs for AP-AP mode.
Clients will be assigned max 32 IDs and STA(associated)/
P2P DEV(self-PEER) will get one ID.
Change-Id: I4d3e74c550e34b1d3417825245990655ead87b28
CRs-Fixed: 2356032
Add new flags for MEC and DA enable/disable
and keep it independent of WDS enable flag
Change-Id: Idb49c45ebb34a38f876dbdb293806c4e96d49b5d
CRs-Fixed: 2336332
Add iwpriv <interface> txrx_stats 29 and
iwpriv <interface> txrx_stats 30 to print wlan_cfg
parameters for both soc and pdev.
Change-Id: I666fe4fa999e82e92ea2961ab662e3e629b58bc7
CRs-Fixed: 2331949
Rx ppdu_type_str displays incorrect ppdu type in
data_txstats output. Change ppdu_type bit length from 2 to 5
to support all types.
Change-Id: I5441140b0d90896c296c8f61d5863e711da95149
CRs-Fixed: 2330614
- Support to pass IPA enabled(disabled) flag from ini to DP layer
- Use ioremap call to translate tx_comp_doorbell_paddr obtained from
calling ipa_setup api to tx_comp_doorbell_vaddr. This is needed to
write the initial value of HP at the doorbell address.
- Change REO_DST_RING_SIZE and WLAN_CFG_TX_RING_SIZE to 1023
for napier/hastings if IPA is enabled. This is needed because,
ipa_setup API can handle only 16-bit values for the size param(bytes)
of the ring.
- Disable hash based flow steering for SAP peers in case IPA is enabled
and set default reo_dest_ring_4 as default RX ring. Since IPA will be
reaping RX packets from reo_dest_ring_4 only, flow steering is not
needed for SAP peers.
- Unmap pre-allocated TX buffers for IPA in the TX completion ring.
- Donot execute IPA functionality if IPA is disabled from ini.
Change-Id: I6855bfe293a457ccc0abd1ad5567f5c95232a9d2
CRs-Fixed: 2183519
Add the basic infra for legacy DP CFG items and the APIs to be used from
other components.
Change-Id: Iec1718f0a93fcb91061892b96ae6ae88174df9ee
CRs-Fixed: 2328481
Because of a HW issue we have added a WAR where we do
learning even on destination MAC address. This will ensure
da_is_valid even for forwarding traffic and HW will cache
this entry for subsequent pkts there by we achieve better
throughput in UL.
Change-Id: Ib61693e9ce52b3a1cdcd4c34eabb3d8368b1ef13
Introduce INI parameters to fetch feature related values based on target
type and add CDP interface to get dp INI parameters to control path
Change-Id: Id6a3f409106eb7dc01b08a3f1ec00dbe7efc359f
Instead of frame control info valid parameter data sequence
control parameter was passed, corrected it
Change-Id: Iccaeb286c1003cbb58c5ebcacf4b0d99c979cbbc
When a BSS peer gets associated with vap configured in sta mode,
the ast type associated with that entry should be different from
that of regular static entries, The reason being bridge on root AP
can pick up the mac address of AP VAP.
Change-Id: Ie322a015d883e2712f41623f71ccbc255b99baf3
Add support for DP RX Threads as a part of the FR. Multiple RX
threads can be enabled from the ini. The code is added in a new DP
module outside of the cmn project.
Change-Id: Id966c46c2799d23c2a4fa1c884610955afed3565
CRs-Fixed: 2256470
Update stats request value if statistics request
from user level is greater that CDP_TXRX_STATS_HTT_MAX value.
Change-Id: I0e36200021fb70662481bc823a95f9e64a8b1e14
CRs-Fixed: 2291842
In current code, DBDC WAR for AST applies only for repeater mode.
Add support to enable this even in AP modex, for use in SON usecases
Change-Id: I82791fbae0cc86ac6d951c4d85b709c755334273
Add new ast_get_type API for DBDC repeater feature.
Add other changes required in WDS and MEC handling
required for DBDC repeater feature to function properly.
Apply sta kickout logic to handle roaming cases
only within same radio. For roaming across radios, DP should
rely on control path.
Change-Id: If9b35720082dd87de40827843a14238e818bc454
To consolidate the stats spread over across UMAC, OL_IF
layer and process at respective datapaths depending
on platforms.
Change-Id: I87d02c767a309e7aeef88a124567259debc1bba5
CRs-Fixed: 2283286
Add ol_txrx_completion_fp in ol_txrx_ops to provide support for
callback during TX completion.
Change-Id: I7af478636badd8f8562460cefaf5db56633df8e9
CRs-Fixed: 2253569
Cancel broadcast of probe response if beacon is already sent
in beacon offload.
Change-Id: I4fea51433fbb959e05988c2daac89fbe839b1cdf
CRs-Fixed: 2209282
Set pdev mask in the HTT Stats request based on
mac id number provided from the user.
Change-Id: Ie8f1208fd3598efd2ea3736719c8b444ef86881a
CRs-Fixed: 2237467
