Add feature flags DP_FLOW_CTL for DP flowctl ops,
DP_PEER_SUPPORT_OPS to support peer handling in DP,
DP_POWER_SAVE for power saving ops in DP, DP_CON_MON DP_MOB_DEFS
DP_INVALID_PEER_ASSERT DP_PRINT_NO_CONSOLE and DP_INTR_POLL_BOTH.
Change-Id: I01dafadf6578c0b5f36ab3ef56624912fb66b100
CRs-Fixed: 2467170
Change Spectral report processing logic to handle
Agile Spectral reports. 160 MHz state machine is not
affected by Agile Spectral reports.
CRs-Fixed: 2458359
Change-Id: Iead6427f57edddd61f7d64a961cc6d936d54ab9e
Reduce log level in tgt_mc_cp_stats_process_stats_event,
tgt_mc_cp_stats_update_peer_adv_stats &
tgt_mc_cp_stats_extract_peer_stats from error to debug because
a stats event can be received unsolicited.
Change-Id: I5ad216034eefd8197f80c2a50e8ae0833b149d06
CRs-Fixed: 2471465
1. Add config table to accommodate per ring type
configuration to have a finer control over the
ring.
2. Provide struct wlan_srng_cfg interface to add
more parameters to control the ring.
3. Add interrupt threshold configuration parameters
to wlan_srng_cfg structure.
4. Add WLAN_CFG_INT_TIMER_THRESHOLD_WBM_RELEASE_RING
and WLAN_CFG_INT_TIMER_THRESHOLD_REO_RING to have
different timer values for REO and WBM ring.
Change-Id: Ied50e3241ab2cc181ca4ed7f126959cd5d9d2de5
CRs-Fixed: 2455297
In send_roam_scan_offload_mode_cmd_tlv, psk_msk from incoming
roam request buffer is copied to destination roam_offload_11i->pmk.
The psk_msk is of size 48 bytes, while destination pmk is of 32
bytes. This could result in OOB.
Copy only 32 bytes for 11i pmk as 802.1x doesn't have PMK size
greater than 32. In future, if Suite-B roaming support is
required, interface changes are need to add new parameter to
copy the remaining 16 bytes.
Change-Id: I303fc15fc0f0169a049d0542674bd7add3cbb1a1
CRs-Fixed: 2470353
Currently the driver checks that DBS for connection
is allowed or not, and on that basis rejects the scan,
but it may happen that FW supports DBS, and DBS for
scan is enabled in the ini, but the DBS for connection
is disabled.
In that case the diver opts for non-dbs scan.
Fix is to allow DBS scan in case of DBS scan enabled in ini.
Change-Id: I080ba4e581a7f77e84a4364237621429bcf91710
CRs-Fixed: 2474580
Featurize PKTLOG cmd handle under feature flag FEATURE_PKTLOG
as part of CONFIG_MCL cleanup.
Change-Id: Iae8c7e7caad001d7d37a8e17c1eb892f96009066
CRs-Fixed: 2467198
Currently driver is using vmalloc to allocate the memory
inside dbglog_block_read api and this buffer is copied to
userspace buffer which may lead to use of uninitialized
buffer.
To avoid above issue use vzalloc to allocated the buffer
which initializes the memory to zero.
Change-Id: Iebc530b000c908231ef8718e79054801d294dd8f
CRs-Fixed: 2470385
The channel number is always 0 from HAL RX PPDU TLV, then monitor
mode frames radiotap channel frequency is always 2407, get the
correct channel number that we saved when set monitor channel.
Change-Id: Ib927fe9aca3a4c1f98845fe37c9b1d37d1d6cf5a
CRs-Fixed: 2471161
There are multiple definitions of __qdf_nbuf_free api based
on CONFIG_MCL feature flag.
As a part of cleanup activity remove multiple definitions
of __qdf_nbuf_free api.
Change-Id: Ib7fce54353561a45a4662c05d56d3af187a269e1
CRs-Fixed: 2472016
Use same stop_th and start_th as QCA_LL_TX_FLOW_CONTROL_V2 for
QCA_LL_PDEV_TX_FLOW_CONTROL which allows pausing/unpausing
netif queues to avoid frame drop in driver.
Change-Id: Ifa649e31a41d1bf89eadc8cc7e9520f0e27b9fe4
CRs-Fixed: 2466999
QDF_DEFAULT_TRACE_LEVEL macro is not getting used in case of
MCL, as part of cleanup of CONFIG_MCL macro dependency,
move this macro definition to correct WIN specific
feature flag.
Change-Id: I75cbfd856308f0027ecb805a41c15966528f314e
CRs-Fixed: 2468286
In srng setup, we set srng alloc size, and allocate memory
for srng buffers.
Even if allocation fails, srng alloc size is set,
which is done even before the allocation is attempted.
In srng clean up path, we attempt to free the memory,
since srng alloc size is set,
but for which allocation had failed,
Instead, when freeing srng buffers, check if we have
a valid address also for srng buffer and then free,
instead of checking srng alloc size only.
Change-Id: I1f2de526e27b7b8d97535bf4c2235c82ffd3ce5f
CRs-Fixed: 2452219
Fix memory allocation failure for nbuf pointers array in
dp_pdev_rx_buffers_attach(), by allocating a single page
of memory for the pointers and re-using them by iterating
in a loop until the total required nbuf's are traversed,
instead of allocating a huge contiguous memory for pointers
to store the address locations of all the nbuf's.
Change-Id: I47ca8f94405e44d6bdbc43129012df1b65b14ba6
CRs-Fixed: 2464598
Regulatory channel state is mistaken as chan_flags.
Set regulatory channel state to CHANNEL_STATE_DISABLE.
Change-Id: I72dd40bb3a7690e0156f72008ad29d209e93ce29
CRs-Fixed: 2461403
The current OSIF logging macros use a "cfg80211" prefix. This is
confusing because that prefix should only be used by the Linux
cfg80211 module. To avoid confusion rename the macros to use an
"osif" prefix.
Change-Id: Id3273498f623d04beec879aa9d77c1d33986357a
CRs-Fixed: 2469485
Currently, ucfg_scan_register_pno_cb and ucfg_scan_get_scan_id
do not do null validation for scan object which can lead to null
pointer dereference. wlan_psoc_get_scan_obj_fl returns null in case
of invalid component id or null psoc and that null scan object is
dereferenced due to missing null validation.
Add null pointer check for scan object in ucfg_scan_register_pno_cb
and ucfg_scan_get_scan_id. Return zero scan id from ucfg_scan_get_scan_id
in case of null scan object.
Change-Id: I1aa1bdee001cace34e22ca11014455a0c7bcc462
CRs-Fixed: 2468518
Currently, wakelock apis are in wma. Create vdev resp wakelock apis
in target_if. Plan is to remove it latter from wma.
Change-Id: Ib410ee2404751544db2f291b466ff0d6ff248e8f
CRs-Fixed: 2441245
Add support to log the important events in
datapath, which will help in debugging the
datapath issues.
IRQ handler, Napi poll and srng access start/end
are the events which are currently logged.
CRs-Fixed: 2457854
Change-Id: Iba105b0e79443b670a01a929f999f94e00ea92f2
Currently for WDI 3.0, IPA runtime enablement is done in the
way that dp_ipa_enable_pipes API is first invoked and followed
by dp_ipa_enable_autonomy API. With SMMU S1 enabled, RX buffers
are mapped to IPA domain in dp_ipa_enable_autonomy. However RX
buffers could be provided to IPA once after dp_ipa_enable_pipes
and this could lead to possible SMMU fault.
Fix is to map RX buffers to IPA domain before dp_ipa_enable_pipes
API.
Change-Id: Ifdad2db6fa26da06a91b84de8f8603cbc779dd67
CRs-Fixed: 2467966
The driver automatically starts beacon reporting if it pauses the beacon
reporting for any reason other than disconnection. In specific cases,
userspace may not want the beacon reporting to be automatically resumed
after a pause. Add interface support for userspace to specify driver not
to start beacon reporting automatically after a pause.
Change-Id: Ia649bc7c7bd7dfe2ae106daecfaf96368151f89b
CRs-Fixed: 2471641
Do not check for msdu Done bit for raw packets as HW
does not set this bit for msdus spread across nbufs.
Change-Id: I9c2af01c6b55600511abeec9ab6fc185fcc6ef36
Currenly this function, is_sa_da_idx_valid(), called from dp_rx_process
does not take MC/BC packets into account. For broadcast packets e.g.
DHCP offer packets from some APs, this check may fail (incorrectly).
Thus dropping the broadcast packet, when it should have been passed
on to the stack.
Fix is_sa_da_idx_valid function by taking MC/BC packets into account.
Change-Id: Ibbb34134e997e0d5394dfa654be84b9fa43434a3
CRs-Fixed: 2466839
currently we are not unmapping the nbuf which was
already mapped in dp_tx_raw_prepare in failure cases
We always need to unmap and free the nbuf if its mapped.
Change-Id: Ia5e6a31a7aac356a934ff2496d0542039bc3ece7
CRs-Fixed: 2462518
A random crash may be caused by out of range access. Add MU
user id check to prevent out of range access.
Change-Id: I531d6c03024c4a6af4e0db97ea00d0874aaef387
Currently when user request comes to populate oem
capabilities, driver is populating all the channels which
includes disabled channels also and the logic to populate
the channels is incorrect. This is resulting in invalid
channel configuration for user space command.
To avoid above issue, use correct api which returns only valid
channels and valid number of channels and populate the channels
correctly in the output buffer.
Change-Id: Ib239d5d869ca9d010c85f444b83751d2e121625d
CRs-fixed: 2470193
The current calculation of head/tail pointer for
srng gives an index in the array by skipping
entry_size dwords.
The head/tail pointers are preffered to be the
index values like in the srng registers, which
brings them in alignment with the other usage of
head/tail pointers.
Fix the calculation of head/tail pointers for srng
by avoiding the division by srng entry size.
CRs-Fixed: 2469332
Change-Id: If9a167f3fac3cb39ebe59618e9ad2224d9e54bcc
Currently the driver checks whether the DFS channel is
in the range of acs channel list given, i.e the start
and end channel, which is not always correct as the channel
range does not imply that all channels in that range are present.
Fix is to explicitly check for the number of channels, and
compare each channel in the acs channel list with the DFS
channel.
Change-Id: Ib17c5e549a2c62652a6333d5d13ca8ff5a7b1674
CRs-Fixed: 2466228
Target assert seen due to host was not reaping the buffers. Therefore,
increase the CE2 entries from 32 to 512 for regular profile build.
Change-Id: I6160ecb070bb98dba0d858f2bef3522ad0b60aa3
CRs-Fixed: 2462117
This reverts commit Change-Id: Icb25be0f4ce60112ef6293f39f9dcc57ebc0288c.
CE2 pipe source ring size is configured as 1700 bytes in LM build where
2048 bytes in regular build. WMI msg size is always hard coded in FW to
2048 bytes in both build. WMI/QMI Pipe configuration is not matching.
Revert CE2 pipe configuration to 2k in the LM build temporarily till FW
updates wmi msg size based ring size configuration.
Change-Id: I2b66097ff9aa23c49fa77fa78b865828f244d108
CRs-Fixed: 2457381
Add API to fetch the vdev queue status and avoid enqueueing command
to serialization queue if the vdev queue is found to be disabled
Change-Id: If615b07dceaeb3113592f24355f254c8e70ca8a2
CRs-Fixed: 2470208
Currently when parsing interop VHT vendor IE, it will have OOB
read when only VHT cap IE is present.
Try to read VHT op IE only when it is present.
Change-Id: Id1919a0ed1df56ecef54d6cb663c10cbcae5065f
CRs-Fixed: 2453071
Propagation from qcacld2.0 to qcacld3.0.
The WMI CMD and EVENT of "get antenna isolation" are already defined,
but not used before in qcacld3.0.
Now, The host driver uses vendor command to get this information
instead of iwpriv command in qcacld-2.0.
The attribution of this feature is already defined in file
"qca_vendor.h". The name is "QCA_WLAN_VENDOR_ATTR_ANTENNA_ISOLATION".
So host driver will use vendor command
"QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY" to get the information
from lower layer.
Change-Id: I915768f622ddc9a70a95ce4fe952f19917a8f901
CRs-Fixed: 2447363
DTIM related commands do not have to be sent with WOW sequence as
they are able to be sent from other paths during runtime PM suspend
or resume, hence remove their runtime PM tagging. Besides, also tag
HPLB WMI_HB_SET_ENABLE_CMDID command for runtime PM.
Change-Id: Ib6cc8a9b8296dbba4d9e9017cfa75856cc9a29c9
CRs-fixed: 2469489
Free the Rx descriptors pool if there is a failure
in allocating memory for nbuf during
dp_pdev_rx_buffers_attach()
Change-Id: If4fcfcfdc2fe70c8c4753518ca020a7d8b0bd2b5
CRs-Fixed: 2464596
Previous commit Ia767643b51ffc780258e1d2fd0cd6a8a9e222ae2 wrongly
updated LF copyright years to 2019, keep the LF copyright years
as 2018-2019.
Change-Id: I214555e7deeea2fa3ab3a55af4c868538d5dd72f
CRs-Fixed: 2464759
Add the following vendor attributes under the enum
qca_wlan_vendor_attr_spectral_scan to support the configuration of
Spectral DMA debug.
1. QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DMA_RING_DEBUG
Enable/disable debug of the Spectral DMA ring
2. QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DMA_BUFFER_DEBUG
Enable/disable debug of the Spectral DMA buffers
CRs-Fixed: 2466432
Change-Id: If61ecb085534cbde5410c5a2b91aa1922579d902
Add change to release vdev reference only on successful removal
of active cmd from serialization active queue.
Change-Id: I2e14f7f53dc38388cdd05f029edc9329f9dd86a7
CRs-Fixed: 2463724
